Determination of ytterbium in animal faeces by tungsten coil electrothermal atomic absorption spectrometry

A method for ytterbium determination in animal faeces by tungsten coil electrothermal atomic absorption spectrometry (TCAAS) was developed. Faeces were dry-ashed in a muffle furnace, the ashes were treated with hydrochloric acid, and 10 mul of sample solution were delivered into 150-W tungsten coil atomizer. A matrix-matching procedure employing a 66-s heating program proved to be efficient for obtaining accurate results. Characteristic mass and detection limit were 7.1 pg and 0.35 mug g(-1) Yb, respectively. The tungsten coil atomizer lifetime exceeded 300 firings with digested solutions and R.S.D. of measurements was 1.9% after ten consecutive injections of 10.0 mug l(-1) Yb. Accuracy of the proposed method was assessed by employing a graphite furnace atomic absorption spectrometric procedure. Application of the paired t-test did not reveal any significant difference for ytterbium contents determined by both methods at 95% confidence level. It was demonstrated that the proposed procedure can successfully be used for evaluation of kinetic passage rate of feed through digestive tract of animals.     

Direct determination of cadmium and copper in seawater using a transversely heated graphite furnace atomic absorption spectrometer with Zeeman-effect background corrector

Methods for the direct determination of copper and cadmium in seawater were described using a graphite furnace atomic absorption spectrometer (GFAAS) equipped with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman effect background corrector. Ammonium nitrate was used as the chemical modifier to determine copper. The mixture of di-ammonium hydrogen phosphate and ammonium nitrate was used as the chemical modifier to determine cadmium. The matrix interference was removed completely so that a simple calibration curve method could be applied. This work is the first one with the capability of determining cadmium in unpolluted seawater directly with GFAAS using calibration curve based on simple aqueous standards. The accuracy of the methods was confirmed by analysis of three kinds of certified reference saline waters. The detection limits (LODs), with injection of a 20-mul aliquot of seawater sample, were 0.06 mug l(-1) for copper and 0.005 mug l(-1) for cadmium.     

Determination of cadmium in hair and blood by tungsten coil electrothermal atomic absorption spectrometry with chemical modifiers

Three chemical modifiers ((NH(4))(2)HPO(4), NH(4)H(2)PO(4), and Pd as Pd(NO(3))(2)) were evaluated for the determination of Cd in acid-digested solutions of hair and blood using electrothermal atomic absorption spectrometry in a tungsten coil atomizer (TCA). All modifiers caused some thermal stabilization of Cd when compared to the behavior observed in nitric acid medium. The best effects were observed in 15 mug ml(-)(1) Pd medium; the characteristic mass of Cd was 0.3 pg and the method detection limits were 0.009 mug g(-)(1) in hair and 0.2 mug l(-)(1) in blood. In addition to a slight thermal stabilization effect, Pd also increased the sensitivity for Cd by ca. 40% and the tungsten coil lifetime by 20% (i.e. from 300 to 360 heating cycles), reduced background signals, and eliminated condensed phase interferences caused by concomitants. The accuracy (3.2% as mean relative error in the Pd modifier) was checked for the determination of Cd in acid-digested solutions of certified reference materials of human hair and blood and by recoveries of Cd in spiked hair and blood samples by both TCA and a graphite furnace procedure. All results obtained in chemical modifiers are in agreement at a 95% confidence level.     

Determination of trace elements in lithium niobate crystals by solid sampling and solution-based spectrometry methods

Solid sampling (SS) graphite furnace atomic absorption spectrometry (GFAAS) and solution-based (SB) methods of GFAAS, flame atomic absorption spectrometry (FAAS), inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) were elaborated and/or optimized for the determination of Cr, Fe and Mn trace elements used as dopants in lithium niobate optical crystals.     

Direct determination of boron in a cobalt-based alloy by graphite furnace-atomic absorption spectrometry

A matrix modifier composed of nickel and zirconium, and a graphite tube treated with zirconium solution were proposed for the determination of boron in cobalt-based alloys by graphite furnace-atomic absorption spectrometry. The effects of this matrix modifier and the treated graphite tube were studied, and the combination of 60 mug of nickel and 20 mug of zirconium as matrix modifier, and a graphite tube soaked with 10 g 1(-1) of zirconium solution were found to give the highest analytical sensitivity. The interference effects of major components (cobalt) and eight minor components (chromium, nickel, tungsten, iron, tantalum, molybdenum, titanium, aluminium and manganese) were studied. Boron in four cobalt-based alloys was determined by graphite furnace-atomic absorption spectrometry employing the proposed matrix modifier and the treated graphite tube, without the preseparation of matrix. The relative standard deviation was 3.3% for 0.048% of boron. A characteristic mass was 500 pg.     

Simultaneous spectrofluorimetric determination of europium, dysprosium, gadolinium and terbium using chemometric methods

A spectrofluorimetric method for the simultaneous determination of dysprosium, europium, gadolinium and terbium in ternary and quaternary mixtures by the use of pyridine-2,6-dicarboxylic acid as a chelating agent was developed. The influence of chemical variables affecting the analytical reaction was evaluated. A partial least-squares procedure and PC Quant software were used to assess data obtained from a variable number of calibration solutions and wavelengths. The ensuing method was validated by applying it to the analysis of synthetic ternary (Eu-Dy-Tb) and quaternary mixtures (Eu-Dy-Gd-Tb) over the concentration ranges 60-550 mug Eu l(-1), 30-400 mug Dy l(-1) and 30-400 mug Tb l(-1) in the former, and 20-220 mug Eu l(-1), 20-235 mug Dy l(-1), 25-230 mug Gd l(-1) and 75-230 mug Tb l(-1) in the latter. The results obtained by using the two quantitation procedures are compared. The relative errors in the determinations were less than 8% in most cases.     

Flame atomic absorption spectrometric determination of chromium(VI) by on-line preconcentration system using a PTFE packed column

A new, sensitive and robust time-based flow injection (FI) method for on-line preconcentration and determination of ultra trace amounts of chromium(VI) by flame atomic absorption spectrometry (FAAS) has been elaborated. The sample is initially mixed on-line with ammonium pyrrolidine dithiocarbamate (APDC) and the Cr(VI)-PDC chelate is absorbed quantitatively on a mini-column packed with polytetrafluoroethylene (PTFE) turnings at a pH range 0.8-1.4. The complex is subsequently eluted with isobutyl methyl ketone (IBMK) and introduced directly into the nebulizer-burner system. The optimized system offered improved performance characteristics, with unlimited lifetime of the proposed column. The enhancement factor was 80, for a 3-min preconcentration time and the sample frequency was 18 h(-1). The calibration curve was linear over the concentration range 1-40 mug l(-1) with a detection limit of c(L)=0.8 mug l(-1) and a relative standard deviation of s(r)=3.2%, at the 20 mug l(-1) level. The proposed method was evaluated by analyzing samples of certified and spiked water, and it was applied to the analysis of natural water samples and sediments.     

On the mechanisms of organic acid modifiers used to eliminate magnesium chloride interferences in graphite furnace atomic absorption spectrometry

Graphite furnace vaporization and inductively coupled plasma excitation, atomic emission spectrometry (GFV-ICP-AES) was applied for monitoring the volatilization of analytes (Cd, Pb, Zn), matrix element (Mg) and the release of carbon containing species. The gas streaming conditions were similar within the horizontal, end-heated graphite tube to that applied conventionally in graphite furance atomic absorption spectrometry (GFAAS). Gas evolution experiments were performed with the use of a quartz furnace, the evolved HCl gas was collected in an absorption vessel for titrimetric determination.The effect of both ascorbic and oxalic acids lies in essence on the promotion of the formation and thermal evolution of hydrochloric acid from the chloride salts at relatively low temperatures. Thus, in the GFAAS analysis, the hydrochloric acid can be evaporated in an extended drying step and/or at the beginning of a properly selected pyrolysis step without loss of analytes. The oxalic acid was found to be more effective than the ascorbic acid in the case of calcium chloride and sodium chloride matrices.     

Radioisotope X-ray fluorescence analysis of vanadium in petroleum coke samples

Radioisotope X-ray fluorescence spectrometry, RIXRF, was used for the determination of vanadium in Venezuelan petroleum coke samples using a simple standardless method and fundamental parameter approach. The values obtained by this method were in agreement with values measured by graphite furnace atomic absorption spectrometry, GFAAS.     

Periodic trends in sensitivity and its dependence on the properties of pyrolytic and non-pyrolytic graphite in graphite-furnace atomic-absorption spectrometry

The sensitivities for metal determination by GFAAS in the peak-height and integration modes were examined with pyrolytic graphite (PG) and non-pyrolytic graphite (NPG) tubes for 34 elements. It was found that there are periodic trends of the mole sensitivity and the elements can be classified according to whether their sensitivity of determination is enhanced by use of (a) the PG tube (alkali, alkaline-earth and transition metals); (b) the NPG tube (semi-metals); about equally by both tubes (Mg, Zn, Cd, and Pb). The mole sensitivity pM for atomic-absorption spectrometry (AAS) was defined as pM = -log(m(h)/A(w)) where m(h) is the weight of an element corresponding to 1% absorption and A(w) is the atomic weight. It was found that the pM values for graphite furnace AAS have a periodic trend similar to that for flame AAS and atomic-fluorescence spectrometry.     

Determination of Cd, Co, Cu, Mn, Ni, Pb, and Zn by Inductively Coupled Plasma Mass Spectroscopy or Flame Atomic Absorption Spectrometry after On-line Preconcentration and Solvent Extraction by Flow Injection System

The concentrations of Cd, Co, Cu, Mn, Ni, Pb, and Zn in natural and sea waters are too low to be directly determined with by flame atomic absorption spectrometry (FAAS) or graphite furnace atomic absorption spectrometry (GFAAS). Specific sample preparations are requested that make possible the determination of these analytes by preconcentration or extraction. These techniques are affected by severe problems of sample contamination. In this work Cd, Co, Cu, Mn, Ni, Pb, and Zn were determined by inductively coupled plasma mass spectroscopy (ICP-MS) or by atomic absorption spectrometry, in fresh and seawater samples, after on-line preconcentration and following solvent elution with a flow injection system. Bonded silica with octadecyl functional group C₁₈, packed in a microcolumn of 100-μl capacity, was used to collect diethyldithiocarbamate complexes of the heavy metals in aqueous solutions. The metals are complexed with a chelating agent, adsorbed on the C₁₈column, and eluted with methanol directly in the flow injection system. The methanolic stream can be addressed to FAAS for direct determination of Cu, Ni, and Zn, or collected in a vial for successive analysis by GFAAS. The eluted samples can be also dried in a vacuum container and restored to a little volume with concentrated HNO₃and Milli-Q water for analysis by ICP-MS or GFAAS.     

Automated on-line separation preconcentration system for palladium determination by graphite furnace atomic absorption spectrometry and its application to palladium determination in environmental and food samples

A flow injection (FI) system was used to develop an efficient on-line sorbent extraction preconcentration system for palladium by graphite furnace atomic absorption spectrometry (GFAAS). The investigated metal was preconcentrated on a microcolumn packed with 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide immobilized on silica gel (DPTH-gel). The palladium is eluted with 40 μl of HCl 4 M and directly introduced into the graphite furnace. The detection limit for palladium under the optimum conditions was 0.4 ng ml⁻¹. This procedure was employed to determine palladium in different samples.     

Determination of lead by on-line solid phase extraction using a PTFE micro-column and flame atomic absorption spectrometry

A rapid and sensitive time-based flow injection (FI) method for on-line preconcentration and determination of lead by flame atomic absorption spectrometry (FAAS), using polytetrafluoroethylene (PTFE) turnings as packing material in a micro-column, has been developed. The sample was mixed on-line with ammonium pyrrolidine dithiocarbamate (APDC) and the non-charged Pb(II)-PDC complex was absorbed quantitatively on the hydrophobic PTFE material, at a pH range 1.4-3.2. The preconcentrated complex was effectively eluted with isobutyl methyl ketone (IBMK) and introduced into the nebulizer-burner system. A nested coil (NC) is proposed for parking the eluate temporarily, in order to enable different elution and nebulization flow rates. With 180 s preconcentration time the sample frequency was 15 h(-1), and the enhancement factor was 330 at 13.0 ml min(-1) sample flow rate. The detection limit was c(L)=0.8 mug l(-1), the relative standard deviation (R.S.D.) 2.6% at the 30 mug l(-1) level and the calibration curve was linear over the concentration range 1.6-100 mug l(-1). The proposed method was evaluated by analyzing certified reference materials of water, sediments and fish tissue. Finally, it was applied successfully to the analysis of various environmental samples.     

Vaporization and atomization of neodymium in graphite furnace atomic absorption spectrometry

A combined theoretical and experimental approach has been used to investigate the atomization process for neodymium in graphite furnace atomic absorption spectrometry (GFAAS). Experimental results, using GFAAS and electrothermal vaporization-inductively coupled plasma-mass spectrometry, show that both oxide and carbide dissociation are responsible for Nd atom formation. A thermodynamic equilibrium model for atomization, based on the thermal dissociation of gaseous lanthanide monoxides, is presented. This model will account for the wide variation in sensitivities reported for the determination of rare earth elements by GFAAS and gives a good correlation between experimental characteristic mass values and monoxide bond dissociation energies.     

Determination of vanadium in water by atomic absorption spectrometry with electrothermal atomization and using hot injection and preconcentration on the graphite tube

A sensitive method for the determination of vanadium in water by atomic absorption spectrometry with electrothermal atomization and using hot injection and preconcentration on the graphite tube is described. The water sample (200 μl) is added to the heated graphite tube in four portions over 200 s. Magnesium nitrate is used as matrix modifier. The precision, accuracy and interferences of the method were investigated. The method allows vanadium down to 0.27 μg l^?1 to be detected.     

Determination of element concentrations in biological reference materials by solid sampling and other analytical methods

Summary Using solid sampling with graphite furnace atomic absorption spectrometry (GFAAS), values for cadmium, copper, lead and zinc in six biological reference materials were obtained from up to four laboratories participating in three collaborative studies. These results are compared with those obtained with other methods used in routine analysis from laboratories of official food control. Under certain conditions solid sampling with GFAAS seems to be suitable for routine analysis as well as conventional methods.     

Pyrolytic and non-pyrolytic boron nitride platforms in electrothermal AAS for the determination of cadmium in sea and estuarine water without chemical modification.

The analytical performance of pyrolytic and non-pyrolytic boron nitride (PBN and NBN) platforms, attached to a commercially available graphite tube furnace, in electrothermal atomic absorption spectrometry (ETAAS) for Cd was studied. Although the tolerable pyrolysis temperature was 300 degrees C with the conventional pyrolytic graphite platform, it increased to 600 and 950 degrees C with the PBN and NBN platforms, respectively. The lifetime of the ceramic platform was 500 firings. The NBN platform provided an enhanced sensitivity with a better reproducibility than others. Using the NBN platform allowed the LOD, based on the variability of the blank (3sigma), to be 0.1 microg l(-1) within a seawater matrix (20,000 mg NaCl l(-1)) and a constant sensitivity in the range 0-30,000 mg NaCl l(-1). Good recovery in the range of 90-105% was observed for Cd (2.0 microg l(-1)) spiked into sea, estuarine and river water samples using the recommended procedure. This work proposes that using the NBN platform allows the direct monitoring and control of contaminated water for Cd by ETAAS without any chemical modification.     

Direct determination of particulate elements in edible oils and fats using an ultrasonic slurry sampler with graphite furnace atomic absorption spectrometry

Through the use of an ultrasonic slurry mixer, graphite furnace atomic absorption spectrometry (GFAAS) can be applied for the fully automated determination of particulate iron and nickel in edible oils and fats. The unsupervised ultrasonic slurry autosampler yields the same accuracy and somewhat better precision than the much more laborious manual GFAAS method.     

新生儿血清微量元素测定及其与生化指标的相关关系

应用火焰原子吸光谱法测定新生儿血清中锌、铜、钙和镁，石墨炉原子吸收光谱法测定血铬和血锰，用标准牛血清作方法质控。在最佳实验条件下，各元素的精密度、检出限以及回收率均令人满意。     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.