Cupric Hexacyanoferrate Nanoparticle Modified Carbon Ceramic Composite Electrodes

Graphite powder-supported cupric hexacyanoferrate(CuHCF) nanoparticles were dispersed into methyltrimethoxysilane-based gels to produce a conducting carbon ceramic composite,which was used as electrode materials to fabricate surface-renewable CuHCF-modified electrodes.Electrochemical behavior of the CuHCF-modified carbon ceramic composite electrodes was characterized using cyclic and square-wave voltammetry. Cyclinc voltammograms at various scan rates indicated that peak currents were suface-confined at low scan rates.In the presence of glutathione,a clear electrocatalytic response was observed at the CuHCF-modified composite electrodes.In addition,the electrodes exhibited a distinct advantage of reproducible surface-renewal by simple mechanical polishing on emery paper,as well as ease of preparation,and good chemical and mechanical stability in a flowing stream.     

Renewable manganous hexacyanoferrate-modified graphite organosilicate composite electrode and its electrocatalytic oxidation of L-cysteine

Manganous hexacyanoferrate (MnHCF) supported on graphite powder was dispersed into methyltrimethoxysilane-derived gels to yield a conductive composite, which was used as electrode material to construct a renewable three-dimensional MnHCF-modifed electrode. MnHCF acts as a catalyst, graphite powder ensures conductivity by percolation, the silicate provides a rigid porous backbone, and the methyl groups endow hydrophobicity and thus limit the wetting section of the modified electrode. Cyclic voltammetry was exploited to investigate the dependence of electrochemical behavior on supporting electrolytes containing various cations. The chemically modified electrode can electrocatalytically oxidize L-cysteine, and exhibits a distinct advantage of polishing in the event of surface fouling, as well as simple preparation, good chemical and mechanical stability, and good repeatability of surface renewal. Electronic Publication     

Sol-gel-derived carbon ceramic electrode containing 9,10-phenanthrenequinone, and its electrocatalytic activity toward iodate

9,10-Phenanthrenequinone (PQ) supported on graphite powder by adsorption was dispersed in propyltrimethoxysilane-derived gels to yield a conductive composite which was used as electrode material to fabricate a PQ-modified carbon ceramic electrode. In this configuration, PQ acts as a catalyst, graphite powder guarantees conductivity by percolation, the silicate provides a rigid porous backbone, and the propyl groups endow hydrophobicity and thus limit the wetting region of the modified electrode. Square-wave voltammetry was exploited to investigate the pH-dependent electrochemical behavior of the composite electrode and an almost Nernstian response was obtained from pH 0.42 to 6.84. Because the chemically modified electrode can electrocatalyze the reduction of iodate in acidic aqueous solution (pH 2.45), it was used as an amperometric sensor for the determination of iodate in table salt. The advantages of the electrode are that it can be polished in the event of surface fouling, it is simple to prepare, has excellent chemical and mechanical stability, and the reproducibility of surface-renewal is good.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Surface-renewable cobalt(II) hexacyanoferrate-modified graphite organosilicate electrode and its electrocatalytic oxidation of thiosulfate

Cobalt(II) hexacyanoferrate (CoHCF) was deposited on graphite powder by an in situ chemical deposition procedure and then dispersed into methyltrimethoxysilane-derived gels to prepare a surface-renewable CoHCF-modified electrode. The electrochemical behavior of the modified electrode in different supporting electrolyte solutions was characterized by cyclic voltammetry. In addition, square-wave voltammetry was employed to investigate the pNa-dependent electrochemical behavior of the electrode. The CoHCF-modified electrode showed a high electrocatalytic activity toward thiosulfate oxidation and could thus be used as an amperometric thiosulfate sensor.     

Evaluation of a mechanically immobilized nickel hexacyanoferrate electrode as an amperometric sensor for thiosulfate determination

A nickel hexacyanoferrate modified electrode was constructed by mechanical immobilization. A reversible peak with midpoint potential of 0.38 V was observed in cyclic voltammetry with 0.1 M NaNO₃. Electrocatalytic oxidation of thiosulfate was effective on the modified electrode at a significantly reduced overpotential of 0.5 V and at broad pH range. The modified electrode can be used for the determination of thiosulfate in the concentration range of 7.0 × 10^–4 to 5.6 × 10^–3 M. It has been used for the amperometric determination of thiosulfate in photographic effluents. The results obtained were in good agreement with those obtained by other methods.     

Evaluation of a mechanically immobilized nickel hexacyanoferrate electrode as an amperometric sensor for thiosulfate determination

A nickel hexacyanoferrate modified electrode was constructed by mechanical immobilization. A reversible peak with midpoint potential of 0.38 V was observed in cyclic voltammetry with 0.1 M NaNO₃. Electrocatalytic oxidation of thiosulfate was effective on the modified electrode at a significantly reduced overpotential of 0.5 V and at broad pH range. The modified electrode can be used for the determination of thiosulfate in the concentration range of 7.0 × 10^–4 to 5.6 × 10^–3 M. It has been used for the amperometric determination of thiosulfate in photographic effluents. The results obtained were in good agreement with those obtained by other methods. Received: 27 January 1999 / Revised: 5 July 1999 / Accepted: 7 July 1999     

Fabrication of Poly(allylamine)ferrocene Monolayer Based on Electrostatic Interaction and Its Electrocatalytic Oxidation of Ascorbic Acid

A poly(allylamine)ferrocene monolayer was built on the surface of gold electrode modified with negatively charged alkanethiol based on electrostatic interaction. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry in detail. The modified electrode was shown to exhibit excellent electrocatalytic response to the oxidation of ascorbic acid. The anodic overpotential was reduced by about 170 mV compared with that obtained at a bare gold electrode. The modified electrode possesses several attractive features, such as simple preparation, fast response and good chemical and mechanical stability.     

Elaboration of carbon paste electrode containing pentadentate Nickel-(II) Schiff base complex: Application to electrochemical oxidation of thiosulfate in alkaline medium

A Nickel Schiff base complex, insoluble in water, was synthesized and used as modifier. A Nickel Schiff base modified carbon paste electrode MCPE was build. The electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDXS), cyclic voltammetry and chronoamperometry. The modifier is elctroactive, a well defined redox couple of Ni^III/Ni^II in alkaline medium was made in evidence. It presents a quasi-reversible system with electron transfer coefficient (0.38) and electron transfer rate of 4.5 s⁻¹. The electrogenerated Ni^III species on the surface of the electrode act as an excellent catalyst toward thiosulfate oxidation reaction with a chemical rate constant K_h equal to 23,6 M⁻¹s⁻¹. The different techniques involved in this study qualify our modified electrode as sensitive, reliable and very stable for thiosulfate analysis.     

Amperometric hydrogen peroxide sensor based on a sol-gel-derived ceramic carbon composite electrode with toluidine blue covalently immobilized using 3-aminopropyltrimethoxysilane

A carbon composite amperometric hydrogen peroxide sensor has been developed using a sol-gel technique. Toluidine blue (TB), which acts as the redox mediator, was covalently immobilized via glutaraldehyde crosslinking with an organically modified silane, namely 3-aminopropyltrimethoxysilane (APTMOS). Methyltrimethoxysilane (MTMOS) was used as the additional monomer; this controls the hydrophobicity of the electrode surface, thus limiting the wettability. The immobilization of TB within the sol-gel matrix was confirmed with FTIR studies. The sol-gel mixture containing TB immobilized in APTMOS and MTMOS was mixed with graphite powder in order to prepare the carbon composite electrode. The electrode was characterized using voltammetric techniques and its electrocatalytic activity for the reduction of hydrogen peroxide was also studied. The carbon composite electrode has the advantage of sensing H₂O₂ at a lower potential and with a higher sensitivity, and interferences due to ascorbic acid, uric acid and acetaminophen were greatly minimized. The linear range for the determination of H₂O₂ extends from 5.37 × 10⁻⁶ to 6.15 × 10⁻³ M, with a correlation coefficient of 0.9981. The detection limit was found to be 2.15 × 10⁻⁶ M. The covalent immobilization of TB effectively prevents the leakage of the water-soluble mediator during measurements. The modified electrode, aside from electrocatalyzing the reduction of H₂O₂, exhibits distinct advantages in terms of surface renewal in the event of surface fouling, as well as simple preparation, good chemical and mechanical stability, and good reproducibility. Figure Amperometric hydrogen peroxide sensor based on sol-gel-derived ceramic carbon composite electrode with toluidine blue covalently immobilized using 3-aminopropyltrimethoxysilane Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Sol-gel derived metal dispersed ceramic-graphite composite electrode for amperometric determination of dopamine

A new silver dispersed composite electrode made of sol-gel derived ceramic-graphite has been demonstrated for the determination of dopamine. Silver has been immobilized within the porous and rigid silicate network in the composite by the specific interaction with (3-mercaptopropyl)trimethoxysilane (MPS). The modified composite electrode coated with Nafion exhibited good catalytic activity for the oxidation of dopamine at a reduced potential of 0.35 V with good sensitivity and selectivity. The sensor showed a linear response to dopamine in the concentration range from 6.6×10⁻⁶ to 1.2×10⁻³ M with a correlation coefficient of 0.9987. The electrode surface can be easily renewed by a simple mechanical polishing and has the advantages of good reproducibility, rapid response and remarkable stability.     

Redox Electrochemistry of Silicon Dioxide Gel Films Containing 1:12 Molybdosilicate Acid and Its Electrocatalytic Activity toward the Reduction of Nitrite Ions

Silicon dioxide gel films containing 1:12 molybdosilicate acid were achieved on the surface of a glassy carbon electrode by sol–gel technique. The electrochemical behavior of the modified electrode was studied in detail. The new chemically modified electrode was shown to exhibit an excellent electrocatalytic activity toward the reduction of nitrite ions in 0.5 M sulfuric acid and possesses several attractive features, such as simple preparation, fast response, good chemical, mechanical stability, and excellent reproducibility.     

Glucose Oxidase/Cellulose–Carbon Nanotube Composite Paper as a Biocompatible Bioelectrode for Biofuel Cells

Biofuel cells are devices for generating electrical energy directly from chemical energy of renewable biomass using biocatalysts such as enzymes. Efficient electrical communication between redox enzymes and electrodes is essential for enzymatic biofuel cells. Carbon nanotubes (CNTs) have been recognized as ideal electrode materials because of their high electrical conductivity, large surface area, and inertness. Electrodes consisting entirely of CNTs, which are known as CNT paper, have high surface areas but are typically weak in mechanical strength. In this study, cellulose (CL)–CNT composite paper was fabricated as electrodes for enzymatic biofuel cells. This composite electrode was prepared by vacuum filtration of CNTs followed by reconstitution of cellulose dissolved in ionic liquid, 1-ethyl-3-methylimidazolium acetate. Glucose oxidase (GOx), which is a redox enzyme capable of oxidizing glucose as a renewable fuel using oxygen, was immobilized on the CL–CNT composite paper. Cyclic voltammograms revealed that the GOx/CL–CNT paper electrode showed a pair of well-defined peaks, which agreed well with that of FAD/FADH_2, the redox center of GOx. This result clearly shows that the direct electron transfer (DET) between the GOx and the composite electrode was achieved. However, this DET was dependent on the type of CNTs. It was also found that the GOx immobilized on the composite electrode retained catalytic activity for the oxidation of glucose.     

Catalytic Detection of Iodide at Cationic Kaolinite Modified Gold Electrode in Presence of Thiosulfate

A gold electrode modified by a thin film of cationic kaolinite was used for the electrochemical detection of iodide in aqueous solution in the presence of thiosulfate. At gold electrode, iodide showed two electrochemical systems in the potential range explored (0.10 V to 0.85 V). The pH‐independent system was assigned to the redox couple I₂/I^? and the pH‐dependent one assigned to the redox couple HIO/ . For increased amount of thiosulfate the oxidation peak intensity of the first system increases sharply followed by the gradual decrease of the reduction peak, due to the chemical reaction between thiosulfate and oxidized iodide. The calibration curve in the presence of excess thiosulfate resulted in an increase of the sensitivity by a factor of 7. To improve this sensitivity, the bare gold electrode was coated by a thin film of an anionic exchanger kaolinite, obtained by grafting the ionic liquid (1‐(2‐hydroxyethyl)‐4‐(tert‐butyl) pyridinium chloride). Accumulation‐detection method yielded a spectacular increase of the oxidation peak current of iodide in the presence of thiosulfate ions. At optimized experimental conditions, a sensitivity of 2.45 μA.μM^?1 and a detection limit of 65 nM were obtained. The method was successfully applied for total iodine determination in povidone?iodine formulation.     

Hydrothermal Synthesis of Three Dimensional Graphene‐Multiwalled Carbon Nanotube Nanocomposite for Enhanced Electro Catalytic Oxidation of Caffeic Acid

Three dimensional graphene‐multiwalled carbon nanotube nano composite (3DG/MWCNTs−Nc) was synthesized by simple hydrothermal method for the amperometric determination of caffeic acid (CA). The prepared nanocomposite was characterized by scanning electron microscopic technique (SEM), ultraviolet‐visible spectroscopy (UV), Raman spectroscopy and infrared spectroscopy (IR). Moreover, the interfacial electron transfer properties of the modified electrode were carried out by the electro chemical impedance spectroscopy (EIS). Besides, the electro chemical performance of the modified electrode was carried out by the cyclic voltammetry (CV) and amperometric (i‐t ) technique. The proposed electrode was exhibited an enhanced electrocatalytic activity towards the detection of CA. Under the optimal condition, the 3DG/MWCNTs−Nc modified electrode displayed a linear range from 0.2 to 174 μM, detection limit (LOD) 17.8 nM and sensitivity of 5.8308 μA μM⁻¹ cm⁻² and on applied potential + 0.2 V. These result showed, 3DG/MWCNTs−Nc modified electrodes showed good repeatability, reproducibility, and higher stability. In addition, the fabricated electrode was then successfully used to determine the CA in real samples with satisfactory recoveries. Which suggests that the 3DG/MWCNTs−Nc as a robust sensing materials for the electrochemical detection of CA.     

Mechanically ground softwood fines as a raw material for cellulosic applications

Utilization of mechanically manufactured lignocellulosic fines (LCNFs) was investigated in making filaments and films. The LCNFs particles were prepared by using a mechanical grinding method with a w-profile grinding stone that produces mostly fines with dimensions in the micrometer scale. The chemical and elemental composition of the w-stone ground LCNFs particles was investigated. It was found that the mechanically manufactured material exhibited the chemical structure of native wood. The LCNFs particles had an anionic surface charge making them colloidally semi-stable in water. The short length of the fines particles prevents their effective mechanical entanglement, which sets some limitations on preparation of filaments and films. Filament manufacturing required the use of a composite approach with carboxymethyl cellulose (CMC) as a binder polymer. The filament was manufactured by using dry-jet wet spinning with aluminium sulfate crosslinking. The chemical composition, crosslinking mechanism, and mechanical properties of the composite filaments were investigated. The composite approach with CMC was also used to prepare composite films with good mechanical performance. The investigated LCNFs material could be utilized in all-lignocomposite applications with cellulose derivatives, where biodegradability and biobased characteristics are desired properties.     

羟基新戊醛在PbO2-SPE组合电极上的电氧化研究

采用热压-电镀法制得PbO₂-固体高聚物电解质(SPE)组合电极. 通过伏安曲线和槽压与过电位曲线的测量, 研究羟基新戊醛在该组合电极上电氧化行为. 通过PbO₂-SPE组合电极在阳极液中有、 无液相支持电解质及不同阴极液情况下的循环伏安曲线和线性伏安曲线比较, 证明该组合电极对羟基新戊醛氧化有较好的电催化作用.     

用于超级电容器的锰钴氧化物/碳纤维材料

The development of high-performance supercapacitor electrode materials is imperative to alleviate the ongoing energy crisis. Numerous transition metals (oxides) have been studied as electrode materials for supercapacitors owing to their low cost, environmental-friendliness, and excellent electrochemical performance. Among the developed binary transition metal oxides, manganese cobalt oxides typically show high theoretical capacitance and stable electrochemical performance, and are widely used in the electrode materials of supercapacitors. However, the poor conductivity and active material utilization of manganese cobalt oxide-based electrode materials limit their potential capacitance application. Cotton is mainly composed of organic carbon-containing materials, which can be transformed to carbon fibers after calcination. The resultant carbonaceous material exhibits a large specific surface area and good conductivity. Such advantages could potentially suppress the negative effects caused by the poor conductivity and small specific surface area of manganese cobalt oxides, thereby improving the electrochemical performance. Herein, we firstly deposited manganese cobalt oxides on cotton by a simple hydrothermal method, yielding a composite of manganese cobalt oxides and carbon fibers via subsequent calcination, to improve the electrochemical performance of the electrode material. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and electrochemical characterizations were used to investigate the physical, chemical, and electrochemical properties of the prepared samples. The fabricated manganese cobalt oxides in the composite were uniformly dispersed on the carbon fiber surface, which increased the contact between the interface of the electrode material and electrolyte, and enhanced electrode material utilization. The electrode material was confirmed to have well contacted with the electrolyte during a contact angle test. Hence, a pseudo-capacitance reaction completely occurred on the manganese cobalt oxide material. Moreover, the addition of carbon fibers reduced the resistance of the material, resulting in excellent capacitive performance. The capacitance of the prepared composite was 854 F∙g^-1 at a current density of 2 A∙g^-1. The capacitance was maintained at 72.3% after 2000 cycles at a current density of 2 A∙g^-1. These results indicate that the manganese cobalt oxide and carbon fiber composite is a promising electrode material for high-performance supercapacitors. The findings presented herein provide a strategy for coupling with carbon materials to enhance the performance of supercapacitor electrode materials based on manganese cobalt oxides. Thus, novel insights into the design of high-performance supercapacitors for energy management are provided.     

Renewable Surface Sol‐gel Derived Carbon Ceramic Electrode Modified with Copper Complex and Its Application as an Amperometric Sensor for Bromate Detection

A sol‐gel technique was used for the preparation of a three dimensional carbon composite electrode modified with [Cu(bpy)₂]Br₂ complex. A reversible redox couple of Cu(II)/Cu(I) is observed at the electrode surface. The electrochemical behavior and stability of the modified electrode was characterized by cyclic voltammetry. The charge transfer coefficient (α) and charge transfer rate constant (K_s) for the modified electrode were determined by cyclic voltammetry, which were found to be 0.46 and 14.2 s^?1, respectively. The modified electrode showed excellent catalytic activity toward bromate reduction at significantly reduced overpotentials and can be used successfully for amperometric detection of bromate. Under the optimized conditions, the calibration plots are linear in the concentration range 0.5 μM ?200μM. Detection limit (signal to noise is 3) and sensitivity were found to be 0.1 μM and 20 nA / μM, respectively. These analytical parameters compare favorably with those obtained with modern analytical techniques. The modified carbon ceramic electrode doped with Cu‐Complex shows a good reproducibility, a short response time (t<2 s), remarkable long term stability (>4 months) and especially good surface renewability by simple mechanical polishing (RSD for 6 successive polishing is 1.5%).     

Sensitivity Enhancement in Nickel Hydroxide/3D‐Graphene as Enzymeless Glucose Detection

A nickel hydroxide (Ni(OH)₂)/3D‐graphene composite is used as monolithic free‐standing electrode for enzymeless electrochemical detection of glucose. Ni(OH)₂ nanoflakes are synthesized by using a simple solution growth procedure on 3D‐graphene foam which was grown by chemical vapor deposition (CVD). The pore structure of 3D‐graphene allows easy access to glucose with high surface area, which leads to glucose detection with an ultrahigh sensitivity of 3.49 mA mM^?1 cm^?2 and a significant lower detection limit up to 24 nM. Cyclic voltammetry (CV) and potentionstatic mode is used for non‐enzymatic glucose sensing. The impedance and effective surface area have been studied well. The high sensitivity, low detection limit and simple configuration of Ni(OH)₂/three dimensional (3D)‐graphene composite electrodes can evoke its industrial application in glucose sensing devices.