Liquid-liquid extraction of copper (II) with dialkyl sulphoxides

The extraction behaviour of Cu(II) from hydrochloric acid and lithium chloride solutions with di-n-pentyl sulphoxide (DPSO) and di-n-octyl sulphoxide (DOSO) has been investigated over a wide range of conditions. At a given strength of the extradant, the extraction increases with increase in HCl and LiCl concentrations. The extraction of the metal also increases with increase in extractant concentration at constant [HCl] or [LiCl]. The species extracted would appear to be CuCl₂·2DPSO/2DOSO and CuCl ₄ ²⁻ ·2DPSO. The extraction of the metal decreases with increase in initial aqueous metal concentration and also with increase in temperature. The extraction also depends on the nature of the diluent employed.     

Liquid-liquid extraction of lead(II) with tributyl phosphate

Tributyl phosphate [30% solution in isobutyl methyl ketone (IBMK)] is used for the quantitative extraction of microgram amounts of lead from 3M hydrochloric acid containing lithium chloride (2M) as salting-out agent. It is then stripped from the organic phase with water and determined colorimetrically as its orange-red complex with 4-(2-pyridylazo)resorcinol at 520 nm. TBP alone cannot quantitatively extract lead in the absence of salting-out agents. The IBMK used as diluent does not extract lead under the conditions used. The period of equilibration needed is 5 min. Lead can be extracted in the presence of up to 100 times as much of certain other ions. The method is found to be applicable to analysis of gun-metal.     

Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).     

Liquid-liquid extraction behaviour of mercury(II) as chloride

The solvent extraction behaviour of mercury(II) chloride with different organic solvents has been studied. The effect of acidity, temperature, concentration of Hg(II), and other anions has been studied. Radicchemical separations from ions such as Fe(III), Ga(III), As(III) and Sb(V) can be accomplished. Au(III) and Tl(III) interfere.     

Liquid-liquid extraction of palladium(II) with N-n-octylaniline from hydrochloric acid media

N-n-Octylaniline in xylene is used for the extractive separation of palladium(II) from hydrochloric acid medium. Palladium(II) was extracted quantitatively with 10 ml of 2% reagent in xylene from 0.5-2 M hydrochloric acid medium. It was stripped from the organic phase with 1:1 ammonia and estimated spectrophotometrically with pyrimidine-2-thiol at 420 nm. The effects of metal ion, acids, reagent concentration and of various foreign ions have been investigated. The method affords binary separation of palladium(II) from iron(III), cobalt(II), nickel(II) and copper(II) and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.     

Liquid-liquid extraction of zinc(II) as its ethyl xanthate

A method for quantitative extraction of zinc with potassium ethyl xanthate into carbon tetrachloride is described. The optimum conditions are: pH 5-6 and Zn(II) to reagent ~1:8 mole ratio. The effects of other ions on the extraction of Zn(2+) have been investigated, and its separation from As(3+), Pb(2+), Cu(2+) and Fe(3+)is described. The possibility of repeated use of the solvent (still loaded with xanthate after the zinc has been stripped) for further extractions (after addition of a little extra xanthate) has been explored. Various stripping agents have been examined, and the optimum conditions found.     

Liquid-liquid extraction of cadmium(II) from aqueous thiocyanate solutions with liquid anion-exchangers

An investigation has been made on the system liquid anion-exchanger-Cd(II)-NCS⁻. The influence of the acidity and thiocyanate concentration of the aqueous phase on the extraction has been studied. Using various methods of analysis, it has been shown that the complex anion present in the organic extracts is Cd(NCS) ₄ ²⁻ . Details are given concerning the removal of traces of Zn(II) from Cd(II)-containing solutions, and the quantitative separation of Cd(II) from Cr(III).     

Liquid-liquid extraction and spectrophotometric determination of palladium(II) and ruthenium (III) with isonitrosoethylbenzoylacetate

Summary A method is described for the extractive spectrophotometric determination of palladium or ruthenium (III) using isonitrosoethylbenzoylacetate as the reagent. The yellow Pd-INEBA complex extracted into chloroform absorbs at 410 nm and conforms to Beer's law in the range of 10–110g of Pd per 10 ml of organic phase. The purple Ru-INEBA complex extracted into MIBK absorbs at 500 nm and conforms to Beer's law in the range of 25–125g of Ru per 10 ml of organic phase. The method affords the determination of both Pd and Ru in the presence of large number of cations and anions.

---

Flüssig-flüssig-Extraktion und spektrophotometriscbe Bestimmung von Palladium(II) und Ruthenium(III) mit Isonitrosoäthylbenzoylacetat (IÄBA)

Zusammenfassung Eine Methode für die Extraktion und spektrophotometrische Bestimmung von Pd oder Ru mit IÄBA wurde beschrieben. Der gelbe Pd-Komplex absorbiert in chloroformischer Lösung bei 410 nm und entspricht dem Beerschen Gesetz für 10–110g Pd/10 ml organische Phase. Der rote Ru-Komplex absorbiert in MIBK bei 500 nm und entspricht dem Beerschen Gesetz für 25–125g Ru/10 ml. Das Verfahren eignet sich für die Bestimmung der beiden Metalle in Gegenwart zahlreicher Kationen und Anionen.

     

Liquid-liquid extraction of copper(II) with cryptand 222 with erythrosine B as the counter-ion

Copper is extracted at pH 5.5 with 3 × 10^–4 M cryptand 222 in dichloromethane with 3 × 10^–4 M erythrosine B as the counter-ion. It can be stripped with 0.5M perchloric acid and determined by atomic absorption spectrometry at 324.7 nm. Copper has been separated from multicomponent mixtures containing zinc, mercury, iron, cobalt, nickel and manganese, which are generally encountered in environmental samples.     

Liquid-liquid extraction of Th(IV) with Cyanex302

Summary Th(IV) was quantitatively extracted from 1 ^. 10^-3M HNO₃ using 1 ^. 10^-3M Cyanex302 in xylene and was stripped from the organic phase with 5M HCl. The effect of different parameters affecting the extraction was systematically studied to achieve optimum conditions for the extraction of thorium. Based on the data some separations of thorium from binary and complex mixtures and its recovery from monazite sand were achieved. The method is reproducible with a relative standard deviation of 0.4%.     

Liquid-liquid extraction of uranium(VI) with 2-ethylhexyltolylsulfoxide (EHTSO)

The liquid-liquid extraction behavior of 2-ethylhexyltolylsulfoxide (EHTSO) towards uranium(VI) contained in nitric acid aqueous solution has been investigated. It was found that the extraction increases with increasing nitric acid concentration up to 5.0 mol/l and then decreases. Extraction also increases with increasing extractant concentration. The extracted species appears to be UO₂(NO₃)₂ ^.2EHTSO. The influences of temperature, NH₄NO₃ and Na₂C₂O₄ concentrations on the extraction equilibrium were also investigated and the thermodynamic functions of the extraction reaction were obtained.     

Liquid-liquid extraction behaviour of mercury(II) as bromide,iodide and thiocyanate

The liquid-liquid extraction behaviour of mercury(II) as bromide, iodide and thiocyanate has been investigated in different oxygenated and non-oxygenated solvents. The effects of the molarity of acids, their sodium or potassium salts, the concentration of Hg(II) ions, the temperature and masking anions have been studied. The possibilities of separation of Hg(II) from Zn(II), Cd(II) Tl(I), Tl(II) and Au(III) in these extractions are discussed.     

Liquid-liquid extraction of arsenic(III) with diluted tributyl phosphate

A 40% tributyl phosphate solution in xylene was used for the quantitative extraction of arsenic(III) from 4M hydrochloric acid/2M lithium chloride. It was stripped from the organic phase with water and determined volumetrically with potassium bromate. The period of equilibration was 3 min. Arsenic was extracted in presence of copper, cobalt, nickel, tin, bismuth, iron, cadmium and other elements which are usually associated with it in sulphide minerals and alloys.     

Liquid-liquid extraction of mercury(II) with triphenylphosphine sulphide: Application to medicinal and environmental samples

A method is proposed for the separation and determination of mercury(II) in environmental samples after its extraction from salicylate solution using triphenylphosphine sulphide (TPPS) as an extractant. The extraction conditions are optimized and reported. The nature of the extracted species is ascertained by a plot of log of distribution ratio versus log of concentration of salicylate and TPPS. Received: 22 January 1997 / Revised: 7 May 1997 / Accepted: 10 May 1997     

Liquid-liquid extraction of mercury(II) with triphenylphosphine sulphide: Application to medicinal and environmental samples

A method is proposed for the separation and determination of mercury(II) in environmental samples after its extraction from salicylate solution using triphenylphosphine sulphide (TPPS) as an extractant. The extraction conditions are optimized and reported. The nature of the extracted species is ascertained by a plot of log of distribution ratio versus log of concentration of salicylate and TPPS.     

Liquid-liquid extraction of thorium (IV) with hexaacetato calix(6)arene

Thorium(IV) was quantitatively extracted at pH 7.5 with 0.0001M of hexaacetato calix(6)arene in toluene and after stripping with 0.05M nitric acid, it was determined spectrophotometrically at 545 nm with thoron. Thorium(IV) was separated from commonly associated elements in fission products like uranium(VI), cesium(I), lead(II), strontium(II) and cerium(IV) in varying proportions. The method is simple, rapid, selective and applicable for the microgram concentrations of thorium(IV).     

Liquid-liquid extraction of protactinium(V) using tri-iso-octylamine

Solvent extraction of protactinium with tri-iso-octyl-amine (TIOA) in xylene, benzene, carbon tetrachloride and chloroform from HCl, HF, HNO₃, HClO₄ and H₂SO₄ media was studied using ²³³Pa as a radiotracer. The extraction efficiencies of protactinium were determined as a function of shaking time, concentrations of mineral acids in aqueous phase, extractant concentrations and diluents in organic phase. The extraction mechanism was discussed. The results show that the extracted species in the organic phase is [(R₃N⁻H)_nPa(OH)_xCl _y ^5−x−y ].