环境水样中总磷分析方法及仪器的研究进展

磷是生物不可或缺的营养元素之一,但由于人类活动影响,在地表水和近岸海水中总磷一直是主要污染指标.总磷测定通常分两步进行:一是将水样中各种不同形态的磷消解转化为可被检测的磷酸盐;二是测定消解后样品中的磷酸盐浓度.消解方法有硫酸-硝酸消解法、干法灰化法、微波辅助消解法、过硫酸钾-高温高压消解法、UV光氧化法等.测定方法包括...     

Sequential injection system for on-line analysis of total nitrogen with UV-mineralization

An automatic method for the determination of total nitrogen in wastewater by sequential injection analysis and mineralization with UV radiation has been developed. The method is based on the mineralization of the samples with sodium persulphate in basic medium under UV radiation. Small volumes of sample and reagents are firstly aspirated into a single channel and then propelled by flow reversal to the UV reactor and then to the detector. The organic and inorganic nitrogen compounds are oxidized to nitrate that is then measured at 226 nm. The sequential injection procedure has been optimized and the factors affecting the efficiency of the oxidation have been studied with a number of test substances with different chemical structures and properties. Solutions in the concentration range 1-56 g l⁻¹ of nitrogen can be analyzed with the described procedure. The sample rate is of 30-40 samples h⁻¹. The LOD is 0.6 mg l⁻¹ N and the reproducibility is 1.8% (28 mg l⁻¹ N). Organic carbon in the form of glucose was added to a number of test solutions to study the potential interference of organic matter.The method was compared with the Kjeldahl digestion method by analyzing 15 wastewater samples with both methods. The nitrate and nitrite content of the non-oxidized samples were subtracted from the corresponding nitrogen content determined after photo-oxidation and the value compared with the Kjeldahl nitrogen content.     

Rapid estimation of global sugars by UV photodegradation and UV spectrophotometry

The UV/UV method developed for the measurement of specific wastewater pollution parameters (ammonium, Kjeldahl nitrogen, total phosphorus) is adapted to the determination of sugars in fruit juices and soft drinks. The procedure is based on the UV spectrophotometric detection of by-products of UV photodegradation of carbohydrates. Time of analysis is greatly reduced by using specific pH conditions and diluted samples.     

Multi-pumping flow system for the determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples

A multi-pumping flow system (MPFS) for the spectrophotometric determination of dissolved orthophosphate and dissolved organic phosphorus in wastewater samples is proposed. The determination of orthophosphate is based on the vanadomolybdate method. In-line ultraviolet photo-oxidation is employed to mineralise organic phosphorus to orthophosphate prior to detection. A solenoid valve allows the deviation of the flow towards the UV-lamp to carry out the determination of organic phosphorus.Calibration was found to be linear up to 20 mg P L⁻¹, with a detection limit (3s_b/S) of 0.08 mg P L⁻¹, an injection throughput of 75 injections h⁻¹ and a repeatability (R.S.D.) of 0.6% for the direct determination of orthophosphate. On the other hand, calibration graphs were linear up to 40 mg P L⁻¹, with a detection limit (3s_b/S) of 0.5 mg P L⁻¹, an injection throughput of 11 injections h⁻¹ and a repeatability (R.S.D.) inferior to 2.3% for the procedures involving UV photo-oxidation.     

TOC versus UV spectrophotometry for wastewater quality monitoring

Total organic carbon (TOC) is one of the most important parameter for the knowledge of water and wastewater quality, because it concerns theoretically all organic compounds. Unfortunately, some restrictions with respect to TOC measurement must be considered, explaining that alternative procedures have been envisaged, among which UV spectrophotometry. Starting from a comparison of results between high temperature digestion and UV photo-oxidation techniques for some specific compounds and real wastewater samples, the work shows the complementary interest of using UV spectrophotometry either directly (with multiwavelength procedures) or after UV photo-oxidation.     

Automated system for on-line determination of dimethylarsinic and inorganic arsenic by hydride generation–atomic fluorescence spectrometry

A multisyringe flow-injection approach has been coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS) with UV photo-oxidation for dimethylarsinic (DMA), inorganic As and total As determination, depending on the pre-treatment given to the sample (extraction or digestion). The implementation of a UV lamp allows on-line photo-oxidation of DMA and the following arsenic detection, whereas a bypass leads the flow directly to the HG-AFS system, performing inorganic arsenic determination. DMA concentration is calculated by the difference of total inorganic arsenic and measurement of the photo-oxidation step. The detection limits for DMA and inorganic arsenic were 0.09 and 0.47 μg L(-1), respectively. The repeatability values accomplished were of 2.4 and 1.8%, whereas the injection frequencies were 24 and 28 injections per hour for DMA and inorganic arsenic, respectively. This method was validated by means of a solid reference material BCR-627 (muscle of tuna) with good agreement with the certified values. Satisfactory results for DMA and inorganic arsenic determination were obtained in several water matrices. The proposed method offers several advantages, such as increasing the sampling frequency, low detection limits and decreasing reagents and sample consumption, which leads to lower waste generation.     

Interferences in the determination of total nitrogen in natural waters by photo-oxidation to nitrate-nitrite mixture

The method proposed by Armstrong, Williams and Strickland for the photo-oxidation of total nitrogen in sea-water to nitrate and nitrite has been studied in some detail, to extend its use to fresh and brackish waters, applying a more accurate method for the determination of the reaction products. Variables influencing the yield of nitrate and nitrite are irradiation time, pH and type of buffer, kind of nitrogen compound and its concentration, and the concentrations of oxygen, carbon dioxide, organic matter and salts, especially bromides, even at the low concentrations found in brackish waters. All these variables interact in a rather complicated way. Interferences from halides, organic matter and carbon dioxide are considerably reduced by ensuring that the pH is kept at 8.5-9 during the irradiation. Because pure solutions of many substances give quantitative yields (> or = 98%) in the pH-range 7-9 usually recommended, whereas others require lower pH for maximal oxidation, a method has been developed involving photo-oxidation first at pH 2.1 and then at pH 8.5-9. In the absence of interfering concentrations of halides the relative increase in yield by an initial irradiation at low pH is especially large (10-36%) for proteins, organic nitrogen in fresh waters, uric acid and urea. A comparison is made between determination of total nitrogen in some natural waters by using photo-oxidation and by a Kjeldahl method modified to give total nitrogen. By making use of the optimal conditions presented in this paper, a negative error of less than 8% is expected in the determination of total nitrogen in fresh waters. For saline waters the error will probably be larger, at least at a high ratio of organic to inorganic nitrogen.     

Determination of midazolam in rabbit plasma by GC and LC following nasal and ocular administration

GC with nitrogen phosphorus detection and HPLC with UV detection were used to determine midazolam (MDZ) levels in rabbit plasma following ocular and nasal administration. For GC with nitrogen phosphorus detection, the analyte was extracted from the plasma using a three‐step liquid–liquid extraction including extraction with an isopropanol/butyl chloride mixture in an alkaline solution, followed by extractions with 1 M HCl, and finally with an alkaline solution of butyl chloride. The recovery of MDZ was dependent on the sample alkalization time prior to the final extraction. The procedure increased the recovery of MDZ up to 99.6%. Improved sample preparation led to a significant increase in the sensitivity of the determination by GC with nitrogen phosphorus detection. The achieved detection limit was 0.34 ng/mL, which is ten times lower than that obtained using HPLC with UV detection. The small plasma volume was another advantage of the GC with nitrogen phosphorus detection method (200 μL per assay). Both administration routes of the anesthetic (nasal and ocular) resulted in comparable plasma MDZ levels. Kinetic simulation of the MDZ plasma was performed for both administration routes.     

The Photooxidation of Some Anthryl Phosphorus Compounds

Abstract

The photo-oxidation of anthryl phosphorus compounds occurs via a Type II process. All products observed can be accounted for by involving a 9, 10-endoperoxide, which may subsequently fragment, resulting in cleavage of the phosphorus moiety from the anthracene nucleus.     

正性远紫外抗蚀剂 Ⅱ.聚苯乙烯砜的荧光光谱研究

利用荧光光谱研究了聚苯乙烯砜正性远紫外抗蚀剂薄膜和溶液的光氧化反应。发现聚苯乙烯砜的荧光随光照时间的延长而逐步减少。这一现象和在未辐照的聚苯乙烯砜中加入微量的芳香氢过氧化物或羰基化合物时的情况相同。这表明:聚苯乙烯砜经光照后荧光的淬灭和体系光氧化过程中产生了氢过氧化物或羰基化合物有关。这一方法适宜于对高聚物光氧化初始阶段的研究。     

Photo-oxidation of proteins and its role in cataractogenesis.

Proteins comprise approximately 68% of the dry weight of cells and tissues and are therefore potentially major targets for photo-oxidation. Two major types of processes can occur with proteins. The first of these involves direct photo-oxidation arising from the absorption of UV radiation by the protein, or bound chromophore groups, thereby generating excited states (singlet or triplets) or radicals via photo-ionisation. The second major process involves indirect oxidation of the protein via the formation and subsequent reactions of singlet oxygen generated by the transfer of energy to ground state (triplet) molecular oxygen by either protein-bound, or other, chromophores. The basic principles behind these mechanisms of photo-oxidation of amino acids, peptides and proteins and the potential selectivity of damage are discussed. Emphasis is placed primarily on the intermediates that are generated on amino acids and proteins, and the subsequent reactions of these species, and not the identity or chemistry of the sensitizer itself, unless the sensitizing group is itself intrinsic to the protein. A particular system is then discussed--the cataractous lens--where UV photo-oxidation may play a role in the aetiology of the disease, and tryptophan-derived metabolites act as UV filters.     

Determination of three nitroimidazole residues in poultry meat by gas chromatography with nitrogen-phosphorus detection.

A method was developed for the determination of the nitroimidazole compounds dimetridazole (DMZ), ronidazole (RNZ) and metronidazole (MNZ) by gas chromatography with nitrogen phosphorus detection. Nitroimidazole compounds were extracted with acetonitrile, followed by acidification using acetic acid and cleanup using strong cation-exchange (SCX) SPE column. Validation in chicken muscle fortified at a concentration of 5 microg/kg gave mean recoveries of 85% DMZ, 90% RNZ, 80% MNZ with RSDs of 13.0, 14.3, 11.2%, respectively (n=6). The method is suitable for statutory residue testing and is used as a quick screening method in the National Residue Surveillance Plan in China.     

Determination of dissolved organic phosphorus in soil solutions by an improved automated photo-oxidation procedure

An improved automated photo-oxidation procedure to determine dissolved organic phosphorus in soil solutions is described. Organically combined phosphorus is converted quantitatively to orthophosphate under UV radiation and an excess of dissolved oxygen. The orthophosphate is determined spectrophotometrically using the Murphy and Riley procedure, modified by increasing the concentration of ascorbic acid. Fluoride was added to the system to overcome potential interference when working with soil solution. The limit of detection was 0.64 mug/l. PO(4)(-3) -P and calibration was linear over the range studied (5-1000 mug/l. PO(4)(-3) -P).     

Degradation of carboxylated styrene butadiene rubber based water born paints. Part 1: Effect of talc filler and titania pigment on UV stability

The photo-oxidation of cast self-supporting films of a carboxylated styrene butadiene random copolymer (c-SBR) containing talc and TR92 (coated rutile) (both separately and together) has been investigated using ATR-FTIR, toluene swelling measurements and DSC (for T_g determination). An imaging chemiluminescence (ICL) method was also used to depth profile the oxidation. Both the wavelength of the UV source and the presence of filler and pigment were found to affect the major degradation products and the propensity for surface crosslinking. At relatively low levels (<50 phr) talc showed an optimum UV stabilising effect at the irradiated surface (as measured by ATR-FTIR determination of carboxylic acid carbonyl index), though, due to iron impurities in the talc, higher loadings impaired the stabilisation performance. However, due to a physical barrier effect (verified using ICL), T_g measurements indicated a progressive increase in overall stabilisation with increasing talc loading. As expected, TR92 significantly retarded surface photo-oxidation and was manifested as slow growth of the carbonyl absorption bands. Carboxylic acid was by far the major component of the latter bands throughout the entire exposure period. Even at advanced stages of oxidation, αβ-unsaturated carbonyl species were the major surface photo-oxidation products in samples containing talc. Interestingly talc also led to significant surface crosslinking whilst the TR92 did not.     

Purity Determination of Phosphorus Compounds by Internat- Standard31 P Nmr Spectroscopy. an Experimental Study and Validation

Abstract

Due to the proportionality between the area of the NMR signal and the number of nuclei, internal standard³¹P NMR spectroscopy is in principle a rapid and simple method for determination of the purity of phosphorus compounds.nuclei, internal standard³¹P NMR spectroscopy is in principle a rapid and simple method for determination of the purity of phosphorus compounds.nuclei, internal standard³¹P NMR spectroscopy is in principle a rapid and simple method for determination of the purity of phosphorus compounds.nuclei, internal standard³¹P NMR spectroscopy is in principle a rapid and simple method for determination of the purity of phosphorus compounds.     

光化学-荧光分析法研究(Ⅱ)——水中Cr(Ⅵ)的光化学-荧光动力学分析法测定

根据Cr(Ⅵ)对利凡诺(R)光氧化反应的催化作用。提出了Cr(Ⅵ)的光化学荧光催化动力学分析新方法。该法灵敏度高、选择性较好,Cr(Ⅵ)含量在1～200ng/mL呈良好的线性关系。直接测定池塘水和污水中Cr(Ⅵ)效果良好。对该反应机制进行了初步探讨,确立了反应动力学方程。     

用离子色谱法测定丙烯中痕量碱性氮化物

采用化学反应浓缩技术，将丙烯中痕量碱性氮化物转变为水溶性的阳离子，用离子色谱法进行测定。该法准确度高，操作简便，可测定丙烯中１０＾９ｇ／Ｌ的碱性氮化物，也可用于炼油厂及其它环境气氛中碱性氮化物的测定。     

New procedure for the examination of the degradation of volatile organonitrogen compounds during the treatment of industrial effluents

We present a new procedure for the determination of 32 volatile organonitrogen compounds in samples of industrial effluents with a complex matrix. The procedure, based on dispersive liquid–liquid microextraction followed by gas chromatography with nitrogen‐phosphorus and mass spectrometric detection, was optimized and validated. Optimization of the extraction included the type of extraction and disperser solvent, disperser solvent volume, pH, salting out effect, extraction, and centrifugation time. The procedure based on nitrogen‐phosphorus detection was found to be superior, having lower limits of detection (0.0067–2.29 μg/mL) and quantitation as well as a wider linear range. The developed procedure was applied to the determination of content of volatile organonitrogen compounds in samples of raw effluents from the production of bitumens in which 13 compounds were identified at concentrations ranging from 0.15 to 10.86 μg/mL and in samples of effluents treated by various chemical methods.     

Dicarbonyl and related compounds as sensitizers for photo-oxidative desulphurization at pentavalent phosphorus

Many 1,2-dicarbonyl compounds, some quinones and benzoin sensitize the photo-oxidation of sulphur at pentacovalent phosphorus. Singlet oxygen and diacyl peroxides are ruled out as intermediates. It is suggested that either acylperoxy or peroxy radicals and/or biradicals derived by reaction of the triplet sensitizer with oxygen are responsible for reaction.     

Determination of mineral phosphate species in sedimentary phosphate rock in Mardin, SE Anatolia, Turkey by sequential extraction

The importance of the effect of phosphate rock depends on the chemical form of phosphorus in which this element is combined. The paper presents the results of inorganic and organic forms of phosphorus in the phosphate rock from Mazidag-Derik, Semikan deposit located at Mardin city at SE Anatolia of Turkey. Total phosphorus concentration in the rock is an average 18.5%. The inorganic phosphorus mean % contents were 99.98% for studied sedimentary phosphate rock. Speciation of inorganic phosphorus was carried out using a method based on sequential extractions of the sedimentary phosphate rock each releasing four forms of inorganic phosphorus: loosely sorbed phosphorus, phosphorus bound to aluminium (P-Al), phosphorus bound to calcium (P-Ca) and phosphorus bound to iron (P-Fe). Calcium bound phosphorus is the dominant form of inorganic phosphorus in the studied sedimentary phosphate rock. Aluminium bound phosphorus is the second, iron bound phosphorus is the third most prevailing form. Loosely bound phosphorus is present in the lowest amounts. Analyses of phosphorus forms in sedimentary phosphate rock using a UV spectrophotometric method and ICP-AES are reported here. For the phosphorus the two methods give the same results and the concentrations are in good agreement with the reference values.