The application of salicylaldoxime in solvent extraction

The extraction of divalent magnesium, manganese, cobalt, nickel, copper, zinc, cadmium, mercury, and lead with solutions of salicylaldoxime in benzene was investigated. The effect of the reagent concentration and particularly the pH of the aqueous phase on the extractability was studied. The application of salicylaldoxime extractions in the separation and determination of various elements is discussed.     

The application of substoichiometric radioisotopic dilution principles to controlled-potential coulometry and solvent extraction

Radioisotope dilution principles are applied to controlled-potential electrolysis and solvent extraction with dithizone for the determination of trace amounts of cadmium. A method was developed to verify whether or not the substoichiometric principle was obeyed. If the substoichiometric principle was not obeyed, analysis was still possible by means of calibration curves. In order to obtain independent verification of the series controlled-potential method and to establish a means of comparison with the radioisotope dilution technique a current integration procedure was also employed. A microtechnique was used to extend the sensitivity of the solvent extraction system for cadmium. Standard zinc spelter and high-purity zinc were analyzed for cadmium after separation by a method of standard addition.     

Comparison of extraction techniques and modeling of accelerated solvent extraction for the authentication of natural vanilla flavors

Accelerated solvent extraction (ASE) of vanilla beans has been optimized using ethanol as a solvent. A theoretical model is proposed to account for this multistep extraction. This allows the determination, for the first time, of the total amount of analytes initially present in the beans and thus the calculation of recoveries using ASE or any other extraction technique. As a result, ASE and Soxhlet extractions have been determined to be efficient methods, whereas recoveries are modest for maceration techniques and depend on the solvent used. Because industrial extracts are obtained by many different procedures, including maceration in various solvents, authenticating vanilla extracts using quantitative ratios between the amounts of vanilla flavor constituents appears to be unreliable. When authentication techniques based on isotopic ratios are used, ASE is a valid sample preparation technique because it does not induce isotopic fractionation.     

The development of sputtering techniques and their application to atomic absorption spectrometry

The concept of using cathodic sputtering to generate atoms for chemical analysis by atomic absorption spectroscopy originated with Alan Walsh in the late 1950s. This article reviews the major developments in sputtering techniques and their application to analytical atomic absorption and fluorescence spectroscopy     

The solvent extraction of flurazepam and its major metaboutes and their determination by polarography

The solvent extraction of flurazepam and its major metabolites from aqueous solutions of varying pH has been studied at concentrations encountered in body fluids following therapeutic dosage. Distribution ratios have been calculated over the pH range 0–14 and for the solvents, ethyl acetate, diethyl ether, cyclohexane and petroleum ether (40–60°C). Based on this study, a solvent extraction scheme is evaluated for the recovery of such concentrations of these compounds in mixtures, with final polarographic determinations. Recoveries exceeding 95% were found; the method is specific for the determination of flurazepam and its acetic acid metabolite in mixtures. The total concentration of the remaining metabolites, i.e. the hydroxyethyl-, N-1-desalkyl-, and N-1-desalkyl-3-hydroxy metabolites can be estimated after solvent extraction and differential pulse polarography in alkaline solutions.     

Halogen-free water-immiscible ionic liquids based on tetraoctylammonium cation and dodecylsulfate and dodecylbenzenesulfonate anions, and their application as chelate extraction solvent.

The tetraoctylammonium cation forms water-immiscible room temperature ionic liquids with dodecylsulfate and dodecylbenzenesulfonate anions. The ionic liquids are halogen-free and can be considered environmentally friendly solvents. At 25 degrees C, the solubilities of water in tetraoctylammonium dodecylsulfate and tetraoctylammonium dodecylbenzenesulfonate were 2.8 and 4.0%, respectively, and the densities were 0.92 and 0.93 g cm(-3). The ionic liquids formed stable interfaces with water at 25 degrees C. The possible use of tetraoctylammonium dodecylsulfate as chelate extraction solvent was evaluated by using 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione as extractant. Tetraoctylammonium dodecylsulfate showed high extraction performance for divalent transition metal cations.     

Extraction of polycyclic aromatic hydrocarbons and organochlorine pesticides from soils: a comparison between Soxhlet extraction, microwave-assisted extraction and accelerated solvent extraction techniques

The methods of simultaneous extraction of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) from soils using Soxhlet extraction, microwave-assisted extraction (MAE) and accelerated solvent extraction (ASE) were established, and the extraction efficiencies using the three methods were systemically compared from procedural blank, limits of detection and quantification, method recovery and reproducibility, method chromatogram and other factors. In addition, soils with different total organic carbon contents were used to test the extraction efficiencies of the three methods. The results showed that the values obtained in this study were comparable with the values reported by other studies. In some respects such as method recovery and reproducibility, there were no significant differences among the three methods for the extraction of PAHs and OCPs. In some respects such as procedural blank and limits of detection and quantification, there were significant differences among the three methods. Overall, ASE had the best extraction efficiency compared to MAE and Soxhlet extraction, and the extraction efficiencies of MAE and Soxhlet extraction were comparable to each other depending on the property such as TOC content of the studied soil. Considering other factors such as solvent consumption and extraction time, ASE and MAE are preferable to Soxhlet extraction.     

Polarographic and voltammetric techniques and their application to the determination of vitamins and coenzymes

The application of modern polarographic and voltammetric techniques to the analysis of vitamins and coenzymes overcomes many of the problems of analysing these compounds in complex matrices such as foods, pharmaceuticals and biological fluids.     

Separation of high purity gadolinium for reactor application by solvent extraction process

A solvent extraction process for the production of nuclear grade Gd₂O₃ for its applications in pressurized heavy water reactor (PHWR) from a crude concentrate of rare earths containing ~70 % Gd₂O₃ has been developed and tested on bench-scale and continuous counter-current operations. The separation of gadolinium from other rare earths with similar chemical properties has been successfully accomplished by adopting a dual cycle solvent extraction employing 2-ethylhexylphosphonic acid, mono-2 ethylhexyl ester (EHEHPA) as an extractant. Taking advantage of the extraction order of rare earths with EHEHPA, in the first cycle, heavy rare earths including Tb, Dy and Y were separated in the product strip solution, while gadolinium was separated in the raffinate solution along with samarium and neodymium. In the second cycle, gadolinium was purified to the extent of >99.5 % with respect to other rare earths. Effects of process variables such as aqueous acidity, phase ratio, metal concentration in the aqueous feed, scrubbing and stripping acidity etc. on separation of terbium and other heavy rare earths in the first cycle and upgrading the purity of Gd₂O₃ in the second cycle have been investigated. The experimental conditions were optimized using computer simulation and validated by bench scale counter-current operations. Under optimized conditions of process parameters, continuous operations of mixer settler yielded kilogram quantity of nuclear pure Gd₂O₃ which was subsequently converted to gadolinium nitrate for PHWR application. The overall recovery was found to be >98 %.     

Extraction by solvent using microwave and ultrasound-assisted techniques followed by HPLC analysis of Harpagoside from Harpagophytum procumbens and comparison with conventional solvent extraction methods

This research paper presents a quick and ecofriendly technique for the extraction of harpagoside (HS), the active marker of Harpagophytum procumbens (HP), along with a comparison with conventional methods so as to propose an efficient HPLC method. HP is widely used as an anti-inflammatory in phytotherapy. The quality control of the herbal drug and extract calls for a time consuming method of conventional extraction, which involves a high consumption of solvents. In this study, HP has been extracted using conventional ultrasound (UAE) and microwave (MAE)-assisted methods. The effects have been examined based on several parameters of HS extraction efficiencies. An HPLC method with a core-shell column was developed in order to calculate the HS in HP. The flow rate was reduced by 4. The method of validation used is specific, linear, precise and accurate. MAE and UAE saved solvent consumption, time and energy. It has, therefore, been found that the combined UAE-HPLC process is convenient and appropriate for the quality control of HP.     

Assisted solvent extraction and ion-trap tandem mass spectrometry for the determination of polychlorinated biphenyls in mussels. Comparison with other extraction techniques

A selective and sensitive analytical method for determination of ten congeners of polychlorinated biphenyls (PCBs 31, 28, 52, 101, 118, 153, 105, 138, 156, and 180) in mussel samples (Mytilus galloprovincialis) based on accelerated solvent extraction (ASE) and gas chromatography–tandem mass spectrometry (GC–MS–MS) is presented in this work. Extraction conditions were optimised using a Plackett–Burman factorial design. The final extracts were analysed after cleanup on alumina columns. The optimised extraction parameters were solvent percentage, sample amount, extraction temperature, pressure, static extraction time, flush percentage, and purge time. The results suggest that PCBs 118, 105, and 180 extractions appeared affected by only one statistically significant factor, pressure, solvent percentage and static extraction time, respectively. Extraction of PCBs 138 and 156 was affected by amount of sample. PCB 138 extraction was also statistically affected by static extraction time and purge time. Quantitative recoveries (64.8–120.3%) were achieved for all PCBs and method precision (RSD < 19%) was satisfactory.     

Synthesis of organophosphorus ligands with a central oxygen atom and their applications in solvent extraction

Various structurally related glycolamide compounds were synthesised and evaluated by solvent extraction experiments for the separation of rare earth elements (REEs) from aqueous acid solutions using dodecane as the diluent. We describe herein the full synthesis of a family of bifunctional ligands with a central oxygen and focus our investigation on the effects of structural modification on the extraction efficiencies. The combination of an amide, a PO donor site, and a central oxygen in such a glycolamide ligand showed interesting extraction properties for heavy rare earth elements from phosphoric acid solutions.     

Development and publication of solvent extraction methods

Guidelines are set for the development of solvent extraction separation methods and for their preparation for publication. The necessity of establishing the novelty of and need for the new method is emphasized. The various items that require specification are discussed, and the criteria for successful application of the method, viz. completeness of extraction, selectivity and freedom from interference, are laid down.     

A theoretical approach to the solvent extraction of metal chelates

A simplified theory for the solvent extraction of metal chelates is presented. Factors which are taken into account include the metal ion, the chelating reagent, aqueous complexing agents, adduct-forming substances, the organic solvent, temperature, rates of extraction, and other effects. Equations are developed for estimating the stoichiometries and the association constants of the involved species.     

Determination of trace metals in sea water by chelex-100 or solvent extraction techniques and atomic absorption spectrometry

Determinations of cadmium, lead, nickel, copper and zinc in sea water are discussed. Two different methods of preconcentration are compared: the trace metals are preconcentrated either by extraction with ammonium pyrrolidinedithiocarbamate/diethylammonium diethyldithiocarbamate into freon followed by back-extraction into nitric acid, or by collection on a Chelex-100 resin followed by elution with nitric acid. Cd, Pb, Ni, and Cu are determined by graphite-furnace atomic absorption spectrometry, while zinc is determined by flame atomic absorption spectrometry. The comparison of methods shows that cadmium can be determined accurately whereas results for the other trace metals may be biased by reagent contamination in the Chelex-100 method. Recovery data are given for both methods of preconcentration. Filtering experiments with Chelex-100 method are described. Results are compared for sea-water samples preconcentrated immediately after sampling and some weeks after sampling, with only freezing for preservation. The present results are consistent with other recent work. The importance of blank values is discussed.     

Comparison of different microwave-based digestion techniques in view of their application to fat-rich foods

Summary Three different microwave-based digestion techniques are tested with a view to the determination of heavy metals in the ashing solutions of fat-rich foods of up to 98% fat content. The known dissolution techniques are amended with respect to the fatty matrix. Advantages and disadvantages are compared with the Tölg procedure and discussed in consideration of the reproducibility, carbon residue contents, losses of analyte, trace contamination, ashing time and the possibility of automation of the dissolution process. A pressurized dissolution technique in PTFE-lined vessels is shown to be the most promising procedure.     

Comparison of solid-phase microextraction, supercritical fluid extraction, steam distillation, and solvent extraction techniques for analysis of volatile consituents in Fructus Amomi

Four sampling techniques, solid-phase microextraction (SPME), supercritical fluid extraction (SFE), steam distillation (SD), and solvent extraction (SE), were compared for the analysis of volatile constituents from a traditional Chinese medicine (TCM) of the dried ripe fruit of Fructus Amomi (Sha Ren). A total of 38 compounds were identified by gas chromatography/mass spectrometry. Different SFE and SPME parameters (modifier content, extraction pressure, and temperature for SFE and fibers, extraction temperature, and time for SPME) were studied. The results by SFE and SPME were compared with those obtained by conventional SD and SE methods. The results showed that SFE and SPME are better sample preparation techniques than SD and SE. Due to SFE's requirement for expensive specialized instrumentation, the simplicity, low cost, and speed of SPME make it a more appropriate technique for extraction of volatile constituents in TCMs.