Preparation and properties of a new chelating resin containing 2-nitroso-1-naphthol

A new chelating ion-exchange resin based on a macroreticular polystyrene—divinyl benzene copolymer and containing 2-nitroso-1-naphthol as the functional species has been synthesized. It is highly stable in acidic and alkaline solutions. Its sorption characteristics for V(V), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Hg(II), Pd(II) and U(VI) have been investigated over the pH range 1.0–7.0 and the exchange-capacities have been found to be generally higher than those of a similar resin containing 1-nitroso-2-naphthol.     

Flame Atomic Absorption Spectrometric Determination of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) in Ammonium Salts and Industrial Fertilizers after PrEconcentration/Separation on Diaion HP-20

A sensitive and simple separation-enrichment technique for the determination of trace amounts of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) was described. Metal ions were complexed with 1-nitroso-2-naphthol at pH 9. Following solid-phase extraction on Diaion HP-20 resin, metals were determined by flame atomic absorption spectrometry. The effect of the matrix ions were investigated. The recoveries of metal ions were greater than 95%. The detection limits of the analyte ions ( k = 3, N = 21) were varying 0.18 µg/l for Cd(II) to 0.44 µg/l for Fe(III). The method was applied to a stream sediment standard reference material (GBW7309), some ammonium salts and industrial fertilizer samples for the determination of copper, cobalt, cadmium, iron and manganese. The relative standard deviations (RSD) of the determinations for analyte ions at µg/g levels varied from 1 to 10%.     

Liquid Extraction of Noble Metal Ions with an α-Amino Phosphonate

The extraction of Au(III), Pt(IV), and Pd(II) ions from aqueous hydrochloric acid solutions with solutions of bis(2-ethylhexyl) N-butyl-N-octylaminomethylphosphonate in chloroform and xylene was studied. The recovery of the noble metal ions is the most efficient at low acidities of the aqueous solution, with a high selectivity of separation from the concomitant Fe(III), Cu(II), Ni(II), and Co(II) ions.     

Optical and chromaticity parameters of transition metal complexes with 1-nitroso-2-naphthol-3,6-disulfonic acid in the presence of surfactants

Optimal conditions for the complexation of transition metal ions [Cu(II), Ni(II), Co(II, III), and Fe(II, III)] with 1-nitroso-2-naphthol-2,6-disulfonic acid have been determined by spectrophotometry in the presence of cationic (cetylpyridinium and cetyltrimethylammonium bromides) and nonionic (OP-10, neonol) surfactants. The introduction of nonionic surfactants does not influence the optical parameters of the system, while the introduction of cationic ones leads to hyperchromic and hypsochromic (for the system Fe(III)-NRS-surfactant) effects. The stoichiometric ratios determined by the method of isomolar series and treatment of the saturation curves of cationic surfactants at pH 4.0 are Me(II): R: surfactant = 1: 2: 4, Me(III): R: surfactant = 1: 3: 6. The molar absorption coefficients and chromaticity parameters of ternary complexes have been determined. A 2–5-fold increase in the molar absorption coefficients and chromaticity functions as compared to binary systems has been revealed.     

Solid phase extraction and determination of metal ions in aqueous samples using Quercetin modified Amberlite XAD-16 chelating polymer as metal extractant

A new chelating polymer has been developed using Amberlite XAD-16 anchored with Quercetin. The modified polymer was characterised by Fourier Transform Infra Red (FTIR) spectroscopy, thermogravimetric analysis, surface area analysis and elemental analysis. The Quercetin anchored polymer showed superior binding affinity for Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) with greater than 95% adsorption under optimum conditions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 387, 313, 195, 473, 210 and 320 µmol g^?1 for Cu(II), Co(II), Cr(III), Fe(III), Mn(II) and Ni(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels, showed t _1/2 for Co(II), Cu(II), Cr(III), Fe(III), Mn(II) and Ni(II) is 20, 15, 25, 10, 30 and 15 min, respectively. Desorption of metal ions was effective with 10 mL of 2 M HCl prior to analysis using flame atomic absorption spectrophotometer. The chelating polymer was highly ion selective in nature even in the presence of interferent ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating polymer was tested on its utility with synthetic and real samples like river, tap water samples and also with multivitamin tablets. It showed relative standard deviation (R.S.D.) values of/less than 3.0% reflecting on the accuracy and reproducibility of data using the newly developed chelating polymer.     

Determination of Metal Ions in Natural Waters by Flame-AAS after Preconcentration on a 5-Amino-1,3,4-Thiadiazole-2-Thiol Modified Silica Gel.

ABSTRACT

5-amino-1,3,4-thiadiazole-2-thiol groups attached on a silica gel surface have been used for adsorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II), Pb(II) and Zn(II) from aqueous solutions. The adsorption capacities for each metal ion were (in mmol.g^?1): Cd(II)= 0.35, Co(II)= 0.10, Cu(II)= 0.15, Fe(III)= 0.20, Hg(II)= 0.46, Ni(II)= 0.16, Pb(II)= 0.13 and Zn(II)= 0.15. The modified silica gel was applied in the preconcentration and quantification of trace level metal ions present in water samples (river, and bog water).     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of Metal Ions by High Performance Liquid Chromatography

The mixture of metal ions [Bi(III), Fe(III), Fe(II), Cu(II), Zn(II), Ni(II), Co(II), Pb(II), Cd(II), Mn(II)] were separated in the bonded-phase strong cation exchange column (Vydac-401 SA) and monitored at 540 nm after a postcolumn reaction with 4-(2-pyridylazo)-resorcinol (PAR). Citrate, tartrate, lactate and α-hydroxyisobutyrate buffer were used as eluent and it has been found that the elution order of some metal ions were changed with different eluents. The detection limits and the calibration curves of metal ions were also studied.     

用1-亚硝基-2-萘酚修饰的微晶蒽分离富集与测定环境水中钴

建立了微晶蒽分离富集环境水样中痕量Co(II)的方法。在pH3.0条件下,1-亚硝基-2-萘酚与Co(II)形成红棕色螯合物被微晶蒽定量吸附,能使Co(II)与Pb(II)、Ni(II)、Mn(II)、Cu(II)、Cd(II)、Zn(II)、Fe(III)、Cr(III)、Al(III)等常见离子分离。本法富集倍数达100倍,检出限为0.14μg/L,回收率97.5%～105%,已应用于不同水样中Co(II)的测定。     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.     

Synthesis and characterization of some pyrimidine, purine, amino acid and mixed ligand complexes

Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes of barbital, thiouracil, adenine, amino acids (methionine, lysine and alanine) and some mixed ligands were prepared and characterized by elemental analyses, IR, electronic spectra, magnetic susceptibility and ESR spectra. Coordination of the metallic centre to the oxygen and nitrogen atoms of barbital, thiouracil, amino acids and coordinate to amino group and nitrogen atom of adenine occurred. Electronic spectra and magnetic susceptibility measurements were utilized to infer the structure of the complexes which are octahedral for Mn(II), Fe(III), Co(II), Ni(II) and Cd(II) and tetrahedral for Mn(II), Cu(II), Zn(II) complexes. ESR spectra were observed for copper complexes with a d(x2)-(y2) ground state with small g(||) values indicating strong interaction between the ligands and their metal ions.     

Liquid extraction of noble metal ions with bis(α-aminophosphonates)

Extraction of Au(III), Pt(IV), and Pd(II) ions from hydrochloric acid media with solutions of two bis(aminophosphonates), such as N,N-bis(dipentoxyphosphorylmethyl)octylamine and N,N′-bis[[(dioctyloxyphosphoryl)methyl]butylamine], in chloroform and xylene was investigated. Both these extractants proved to be highly effective for Au(III) ions in a wide acidity range, which allows these ions to be separated from other noble metal ions with a high degree of selectivity. At the same time, Pt(IV) and Pd(II) ions cannot be separated from one another with the extractants studied. The selectivity of their separation from Fe(III), Cu(II), Co(II), and Ni(II) metal ions is, too, not high. The reasons for these results lie in the specific structural features of the extractants, which predetermine the extraction mechanism.     

Tuning the selectivity of two chemosensors to Fe(III) and Cr(III)

Two rhodamine-based chemosensors (1 and 2) were designed, and their sensing behavior toward metal ions was investigated by fluorescence spectroscopies. 1 and 2 achieved tuning the selectivity to Fe(III) and Cr(III) in 100% aqueous solution, whereas other ions including Cd(II), Co(II), Cu(II), Ni(II), Zn(II), Mg(II), Ba(II), Pb(II), Na(I), and K(I) induced basically no spectral change, which constituted a Fe(III)-selective and a Cr(III)-selective fluorescent chemosensor, respectively.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Synthesis, investigation and spectroscopic characterization of piroxicam ternary complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with glycine and DL-phenylalanine

The ternary piroxicam (Pir; 4-hydroxy-2-methyl-N-(2-pyridyl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide) complexes of Fe(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with various amino acids (AA) such as glycine (Gly) or DL-phenylalanine (PhA) were prepared and characterized by elemental analyses, molar conductance, IR, UV-Vis, magnetic moment, diffuse reflectance and X-ray powder diffraction. The UV-Vis spectra of Pir and the effect of metal chelation on the different interligand transitions are discussed in detailed manner. IR and UV-Vis spectra confirm that Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl group of the amide moiety. Gly molecule acted as a uninegatively monodentate ligand and coordinate to the metal ions through its carboxylic group, in addition PhA acted as a uninegatively bidentate ligand and coordinate to the metal ions through its carboxylic and amino groups. All the chelates have octahedral geometrical structures while Cu(II)- and Zn(II)-ternary chelates with PhA have square planar geometrical structures. The molar conductance data reveal that most of these chelates are non electrolytes, while Fe(III)-Pir-Gly, Co(II)-, Ni(II)-, Cu(II)- and Zn(II)-Pir-PhA chelates were 1:1 electrolytes. X-ray powder diffraction is used as a new tool to estimate the crystallinity of chelates as well as to elucidate their geometrical structures.     

On the mechanism of electroreduction of sulphur-containing ligands induced by the electroreduction of transition metal cations

The large scale electrolysis of Zn(II), Cd(II), Hg(II), Cu(II), Ni(II), Co(II), Co(III), Fe(II), Mn(II), Cr(II), Cr(III), Bi(III), In(III) and Sb(III) at mercury electrodes in presence of mercaptoacetic acid, 3-mercaptopropionic acid, cysteine and thiourea was carried out and the products were investigated. In case of transition metal ions the catalytic reduction of organic compounds resulting in the formation of sulphide ions was found. There are two possible ways of the production of these ions: (i) consisting in the formation of a complex between transition metal ion and organic ligand which is subsequently, reduced, and (ii) direct electroreduction of organic compound on the electrode modifiied by the deposition of metal and metal sulphide. For both cases the mechanism of electroreduction was discussed.     

Synthesis, magnetic, spectral, and antimicrobial studies of Cu(II), Ni(II) Co(II), Fe(III), and UO2(II) complexes of a new Schiff base hydrazone derived from 7-chloro-4-hydrazinoquinoline

A new hydrazone ligand, HL, was prepared by the reaction of 7-chloro-4-hydrazinoquinoline with o-hydroxybenzaldehyde. The ligand behaves as monoprotic bidentate. This was accounted for as the ligand contains a phenolic group and its hydrogen atom is reluctant to be replaced by a metal ion. The ligand reacted with Cu(II), Ni(II), Co(II), Fe(III), and UO2(II) ions to yield mononuclear complexes. In the case of Fe(III) ion two complexes, mono- and binuclear complexes, were obtained in the absence and presence of LiOH, respectively. Also, mixed ligand complexes were obtained from the reaction of the metal cations Cu(II), Ni(II) and Fe(III) with the ligand (HL) and 8-hydroxyquinoline (8-OHqu) in the presence of LiOH, in the molar ratio 1:1:1:1. It is clear that 8-OHqu behaves as monoprotic bidentate ligand in such mixed ligand complexes. The ligand, HL, and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass, and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square-planar geometry, while Ni(II) mixed complex has also formed a tetrahedral configuration and UO2(II) complex which formed a favorable pentagonal biprymidial geometry. Magnetic moment of the binuclear Fe(III) complex is quite low compared to calculated value for two iron ions complex and thus shows antiferromagnetic interactions between the two adjacent ferric ions. The HL and metal complexes were tested against one stain Gram positive bacteria (Staphylococcus aureus), Gram negative bacteria (Escherichia coli), and fungi (Candida albicans). The tested compounds exhibited higher antibacterial acivities.     

Investigations on the effect of aqueous acetone medium on separation of metal ions on Chelex 100 ion-exchanger

The use of glycine as a complexing agent in acetone-water medium for the separation of metal ions with Chelex 100 chelating resin has been investigated. The affinity of metal ions for Chelex 100 in the presence of glycine in acetone-water and aqueous medium was determined as a function of acidity and it was established that the presence of acetone is an essential factor in production of differentiation in the selectivity and for consequent separation of a number of mixtures of metal ions [Cu(II)Co(II); Cu(II)Al(III)Pb(II); Cu(II)Ni(II)Co(II); Cu(II)Ni(II)Pb(II)]. The mechanism of the effect of acetone is discussed.     

Synthesis, characterization and applications of pyrocatechol modified amberlite XAD-2 resin for preconcentration and determination of metal ions in water samples by flame atomic absorption spectrometry (FAAS)

A new chelating resin is prepared by coupling Amberlite XAD-2 with pyrocatechol through an azo spacer, characterized (by elemental analysis, IR and TGA) and studied for preconcentrating Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) using flame atomic absorption spectrometry (FAAS) for metal monitoring. The sorption is quantitative in the pH range 3.0-6.5, whereas quantitative desorption occurs instantaneously with 2 M HCl or HNO(3) The sorption capacity has been found to be in the range 0.023-0.092 mmol g(-1) of resin. The loading half time (t(1/2)) is 1.4, 4.8, 1.6, 3.2, 2.3 and 1.8 min, respectively for Cd, Co, Cu, Fe, Ni and Zn. The tolerance limits of electrolytes NaCl, NaBr, NaNO(3), Na(2)SO(4) and Na(3)PO(4) in the sorption of all the six metal ions (0.2 mug ml(-1)) are reported. The Mg(II) and Ca(II) are tolerable with each of them (0.2 mug ml(-1)) up to a concentration level of 0.01-1.0 M. The enrichment factor has been found to be 200 except for Fe and Cu for which the values are 80 and 100, respectively. The lowest concentration of metal ion for quantitative recovery is 5, 10, 20, 25, 10 and 10 mug l(-1) for Cd, Co, Cu, Fe, Ni and Zn, respectively. The simultaneous determination of all these metal ions is possible and the method has been applied to determine all the six metal ions in tap and river water samples (RSD相似文献   

Preparation, characterization and application of an cellulose ion-exchanger with acetoacetamide functional groups

Summary A method is described for functionalizing acetoacetamide chelating groups onto microcrystalline cellulose (Cell-AcAc). This material shows a significant affinity for Fe(III), Cu(II) and U(VI) and no or very less affinity for the M(I) ions (M=Na, K), M(II) ions (M= Mg, Ca; Fe, Co, Ni, Zn), La(III) and Y(III) including Th(IV). The obtained K _d values offer a column separation method for U(VI) ions from the rest of above-mentioned metal ions except Fe(III). Cell-AcAc and its Cu(II) complexes are characterized by means of FT-IR spectra.

---

Darstellung, Charakterisierung und Anwendung von Ionenaustauschmaterial aus Cellulose mit chemisch gebundener Acetoacetamid-Gruppe

Zusammenfassung Die Darstellung von immobilisiertem Acetoacetamid auf mikrokristallinem Cellulosepulver (Cell-AcAc) wird beschrieben. Der Ionenaustauscher Cell-AcAc hat eine ausgeprägte Affinität für Fe(III), Cu(II) and U(VI), aber nahezu keine für die M(I)-Ionen (M=Na, K) M(II)-Ionen (M=Mg, Ca; Fe, Co, Ni, Zn), La(III), Y(III) sowie Th(IV). Die erhaltenen K _d-Werte ermöglichen für U(VI)-Ionen eine quantitative säulen-chromatographische Trennung von den anderen genannten Kationen mit Ausnahme von Fe(III). Das Ionenaustauschmaterial Cell-AcAc und sein Cu(II)-Komplex wurden durch FT-IR-Spektren charakterisiert.