金属硫蛋白异构体及亚型异构体的液相色谱分离与质谱鉴别

建立了金属硫蛋白(MT)异构体及亚型异构体的色谱分离与质谱鉴别方法。将金属硫蛋白混合物通过弱阴离子DEAE Sephadex A-25离子交换柱,结合离线电感耦合等离子体质谱(ICP-MS)对锌诱导金属硫蛋白的两个异构体MT-1和MT-2进行分离和检测;利用Sephadex G-25凝胶排阻色谱柱对得到的两个金属硫蛋白异构体进行脱盐;探索脱盐后的金属硫蛋白异构体在不同色谱条件下的C18反相色谱柱上的保留行为,进而实现各个亚型异构体的分离;通过在线电喷雾质谱检测实现了对金属硫蛋白各个亚型异构体的鉴别。结果表明,通过优化色谱条件,由离子交换色谱及凝胶排阻色谱得到的金属硫蛋白各亚型异构体在酸性条件下均得到了良好的分离,质谱检测结果与前人的文献报道结果一致。该方法可使金属硫蛋白各异构体均达到最佳的分离效果。     

金属硫蛋白加质子常数及与Cd(II)络合常数测定

用pH计和Cd离子选择电极测定了金属硫蛋白的加质子常数及其与Cd(Ⅱ)的络合常数, 用改进的简化络合模型处理实验结果, 得到了去金属硫蛋白(apo MT)中6类不同的加质子基团的数目及其加质子常数。对Cd(Ⅱ)滴定数据的计算表明, MT中两个结构域——α和β对Cd(Ⅱ)的络合常数相差约1000倍。从热力学定量描述了MT中两个结构域结合金属离子选择优先顺序。     

Metallothionein isoforms from horse, rabbit and rat separated by capillary zone electrophoresis at low pH

A comparative study of MT isoforms in rat liver and in commercial Sigma MT preparations from rabbit liver and horse kidney was performed using capillary zone electrophoresis (CZE). Electropherograms revealed the co-migration of MT forms from these species. A special form, the a-form (not binding Cd), occurred in various MT samples in different amounts, depending on the method used for MT purification. In the rabbit liver electropherogram a main form appeared (the b-form), which might be a modified MT form. A band of unknown composition, running ahead of the rat liver MT-I and -II forms on polyacrylamide gels, not having Cd binding affinity, probably had its counterpart in a yet unidentified CZE peak. CZE electropherograms of purified MT samples may contain main peaks that do not represent genuine and functional MT isoforms. Results are also presented which indicate that at low pH the MT-II form is more unstable than MT-I.     

金属硫蛋白的色谱/电喷雾电离质谱联用表征方法

通过反相液相色谱(RPLC)与电喷雾电离质谱(ESI-MS)的联用技术,对镉诱导金属硫蛋白标准物质MT-1和MT-2的结构进行表征分析。采用Vydac C8 反相色谱柱(250 mm×2.1 mm i.d., 5 μm, 30 nm),流动相A为pH 6.0的5 mmol/L乙酸铵水溶液,流动相B为pH 6.0的5 mmol/L乙酸铵的甲醇-水(体积比为1∶1)溶液,流动相流速为0.20 mL/min,在40 min内流动相B的体积分数从10%增加到37.5%进行梯度洗脱。分别用紫外(UV)和ESI-M     

The synthesis of new polymeric sorbent and its application in preconcentration of cadmium and lead in water samples

Metal determinations at low concentration levels (≤ng mL⁻¹) comprise one of most important targets in analytical chemistry. This interest also increases in different areas such as biology, medicine, environment and food samples. In spite of inherent high sensitivities obtained for electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma-mass spectrometry (ICP-MS), these techniques have some limitations depending on the concomitants. As a result, interest in preconcentration techniques still continues increasingly for trace metal determinations by flame atomic absorption spectrometry (FAAS) due to the high accuracy of this method.In this work, thioureasulfonamide resin was synthesized, characterized and applied as a new sorption material for determinations of cadmium and lead in water samples. The method is based on the sorption of Cd and Pb ions on the synthesized resin without using any complexing reagent. The optimization of experimental conditions was performed using factorial design including pH, amount of resin, contact time, first sample volume and final eluent volume. Using the experimental conditions defined in the optimization, the method was applied to the determination and preconcentration of Cd and Pb at ng mL⁻¹ level in natural water. Flame AAS was used for trace metal determinations. This method exhibits the superiority in compared to the other adsorption reagents because of the fact that there is no necessity of any complexing reagent and optimum pH of solution presents in acidic media. Consequently, 600- and 360-fold improvements in the sensitivity of FAAS were achieved by combining the slotted tube atom trap-atomic absorption spectrometry (STAT-FAAS) and the purposed enrichment method for Cd and Pb, respectively.     

Identification of cadmium containing metabolites in HepG2 cells after treatment with cadmium-selenium quantum dots

The transformation of quantum dots (QDs) by organisms has attracted broad attention but remains unclear. Understanding of the metabolites helps to reveal the transformation pathway of QDs. Cd containing-metallothionein (MT) are the main species formed by Cd released from CdSe QDs in HepG2 cells, while speciation analysis of Cd containing MTs remains a challenge because MTs has several subisoforms and can bind with several metals. Herein, we built a hyphenated platform for speciation analysis of QDs in HepG2 cells after treatment with CdSe/ZnS QDs. The Cd-containing MTs were separated in reversed phase high performance liquid chromatography (RP-HPLC) and subsequently online detected by inductively coupled plasma mass spectrometry (ICP-MS) and electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-Q-TOF-MS) parallelly. Four groups of Cd-containing metabolites were found by detecting Cd in ICP-MS. Their structures were identified in ESI-Q-TOF-MS and further confirmed with standards of four subisoforms of MT, including N-terminal acetylation MT2a, N-terminal acetylation MT1e, N-terminal acetylation MT1g and MT1m. Each group of them contains various stoichiometry of Cd/Zn. The metabolites of QDs remain same while the concentrations of each metabolite and its stoichiometry of Cd/Zn vary for different incubation concentration/time. This work provides a new parallel hyphenation technique of HPLC-ICP-MS/ESI-MS with high separation resolution and powerful detection ability, and the obtained results provide detailed metabolism information of QDs in HepG2 cells after treatment of CdSe/ZnS QDs, contributing to deep exploration of the functional mechanisms of QDs in organisms.     

Radiochemical solvent extraction method for the determination of Cd and Hg using thionalide as a single reagent

A radiochemical solvent extraction method has been developed for the simultaneous determination of submicrogram amounts of Cd and Hg using^115mCd and²⁰³Hg tracers respectively and thionalide as a single complexing reagent. Hg was determined by 0.05% thionalide in ethyl methyl ketone (EMK) at pH 8.5, masking Cd with 0.1M KCN. From the aqueous phase Cd was demasked using formal-dehyde-acetic acid, pH adjusted to 9.5 and extracted into 0.05% thionalide in chloroform. The method is simple, fast and yields accurate results.     

Structure-reactivity relationships among metallothionein three-metal domains: role of non-cysteine amino acid residues in lobster metallothionein and human metallothionein-3

Metallothionein (MT) domains of different origins, exhibiting distinct, highly conserved cysteine positions, show differences in metal-cysteine coordination and reactivity. Lobster MT, which includes two Cd3S9 beta domains, was chosen as a basic model to study the structure-function relationship among the clusters. The possible influence of (1) the position of the cysteine residues and (2) the steric and electrostatic effects of neighboring amino acids on the folding and stability of MT clusters have been examined with the native lobster beta C and beta N domains, each having nine cysteines and binding three M2+ ions, and a modified domain beta C-->N, in which the cysteines of the C-terminal domain are relocated so they are spaced as in the N-terminal domain. Each has been synthesized and characterized by UV, CD, 113Cd NMR, and 1H NMR spectroscopies. The synthetic native domains (Cd3 beta C and Cd3 beta N) displayed spectroscopic properties, metal-binding affinities, and kinetic reactivity similar to those of the holo protein. In contrast, the modified Cd3 beta C-->N domain was unusually reactive and, in the presence of Chelex, a metal-ion chelating resin, was converted to a Cd5(beta C-->N)2 dimer. These differences in structure and reactivity demonstrate that the requirements for formation of a stable type-B, Cd3S9, beta cluster are more stringent than simply the sequential positions of the cysteines along the peptide chain and include specific interactions with neighboring amino acids. Molecular mechanics calculations suggest that changes of even a single amino acid in lobster Cd3 beta N toward lobster Cd3 beta C-->N or in mammalian MT1 or MT2 toward Cd3 beta-MT3 (GIF) can destabilize their structures.     

金属硫蛋白与Cd2+、Pb2+络合反应的微量量热滴定

Metallothionein, a class of low molecular weight, metal- and cysteine-rich Proteins, are postulated to play a central role in metal-related biological processes such as the detoxification of Cd2+and Pb2+. The thermal Properties of the interactions of rabbit liver Zn_7MT2 and apo-MT2 with Cd2+ and Pb2+ were studied using isothermal titration calorimeter. The same product Cd_7MT formed in the reactions of Cd2+ with Zn_7MT2 and apo-MT2, while the reactions of Ph2+ with Zn_7MT2 and apo-MT2 Produced two MT species Ph_7MT and Ph_7MT'. The thermodynamic parameters (△H、 △G、 △S, etc. ) for the reactions of MT with 1 mol metal ions were measured at 293.15 K, pH 4.70. All of these reactions are spontaneous, exothermic processes. The values of △G and K show that Cd2+ is more affinitive to MT than Ph2+. The equilibrium constants K of the replacement reactions of Zn_7MT2 by 1 mol Cd2+ and Pb2+ are 2. 7×105 and 1. 3×105 respectively, that means the concentrations of free Cd2+ and Pb2+ are depressed to about 1. 0×10-5 after the reactions with Zn_7MT2. These data can be used to evaluate quantitatively the ability of MT in Cd2+ and Pb2+ detoxificatio.     

Analysis of metallothioneins by means of capillary electrophoresis coupled to electrospray mass spectrometry with sheathless interfacing

Capillary electrophoresis (CE) coupled to electrospray mass spectrometry via sheathless interfacing has been applied to the analysis of mammalian metallothionein (MT) extracts. In a rabbit-liver extract, four (MT-2C, MT-2A, MT-2D and MT-2E) out of six known MT sub-isoforms were unambiguously identified under three CE-resolved peaks. A fourth peak was found to contain MT-1A and/or MT-2B, whose molecular masses differ by only 1 Da. Traces of non-N-acetylated MT-2D and MT-2E were observed in a fifth, minor peak. In a rat-liver extract, both MT-1 and MT-2 were resolved and identified. Non-N-acetylated MT-2 was also identified in a resolved, minor peak. Minimum detectable amounts of MTs have been estimated to be approximately 0.6 fmol per sub-isoform.     

The influence of complexing agents on the effectiveness of electrochemical masking with anionic surfactants in anodic stripping voltammetry

The influence of sodium dodecyl sulphate, sodium dodecyl sulphonate and sodium stearinate on the anodic stripping peaks of Tl(I), Pb(II), Cd(II), Cu(II) and In(III) was investigated. The supporting electrolytes were 0.5M sodium sulphate solution, 0.2M citrate solution (pH 3.7, 4.6 and 7.3), 0.5M tartrate solution (pH 4.4) and 0.1M solution of EDTA (pH 4.4). The composition of complex compounds forming in a solution under experimental conditions was defined. The conditions of ion reduction of metals on hanging mercury electrode during the electrolytical deposition were investigated. The investigation included an analysis of voltammetric curves of the metal ions. The obtained results suggest that "electrochemical masking" is much stronger in electrolytes containing a complexing agent than in the sodium sulphate solution. The influence of the complexing agent may not be explained in terms of the interaction between the form of the complex and the charge of the adsorbed surfactant particles; rather the complexing process is connected with indirect inhibition, i.e., by decreasing the rate of charge transfer reaction.     

羧甲基纤维素钠/蒙脱土悬浮体系的流变性能及其影响因素

考察了蒙脱土(MT)质量分数(w)、羧甲基纤维素钠(CMC)/MT质量比(R)、电解质(NaCl、MgCl2和AlCl3)、pH值和温度对MT或CMC/MT悬浮体系流变性能和触变性的影响。 结果表明,随w增加,纯MT悬浮体系的流体类型由近牛顿流体向塑型流体变化,触变类型则由无触变、正触变向复合触变性转变;而CMC/MT悬浮体系仍保持MT体系的正触变塑型流体特征,但屈服值τ0和稠度指数K增加,滞后环面积S和电动电势|ζ|先增加后减小,表现出同步变化。 电解质和实验温度均不改变CMC/MT悬浮体系的正触变性塑型流体特征,但电解质使τ0和K增加,而温度增加使τ0和K减小。 随介质pH值的增加,CMC/MT体系由负触变性变为正触变性,|ζ|增大,S先增加后减小,且在pH=8.46时达到最大。     

Surface-initiated synthesis of poly(3-methylthiophene) from indium tin oxide and its electrochemical properties

Poly(3-methylthiophene) (P3MT) was synthesized directly from indium tin oxide (ITO) electrodes modified with a phosphonic acid initiator, using Kumada catalyst transfer polymerization (KCTP). This work represents the first time that polymer thickness has been controlled in a surface initiated KCTP reaction, highlighting the utility of KCTP in achieving controlled polymerizations. Polymer film thicknesses were regulated by the variation of the solution monomer concentration and ranged from 30 to 265 nm. Electrochemical oxidative doping of these films was used to manipulate their near surface composition and effective work function. Doped states of the P3MT film are maintained even after the sample is removed from solution and potential control confirming the robustness of the films. Such materials with controllable thicknesses and electronic properties have the potential to be useful as interlayer materials for organic electronic applications.     

Speciation of copper, lead and cadmium in aquatic systems by circulating dialysis combined with flame AAS

The assessment of free Cu(II), Pb(II) and Cd(II) ions in the presence of complexed species was realised by a circulating dialysis with Cuprophan planar membranes and subsequent quantification by flame atomic absorption spectrometry. The effect of the flow rate, the time of equilibration, pH and the presence of various complexing agents in the donor solutions were studied. The determination of free Cu(II), Pb(II) and Cd(II) ions in the presence of soil humic substances resulted from the above studies.     

Amino acids and peptides. XXVII. Synthesis of phytochelatin-related peptides and examination of their heavy metal-binding properties

Phytochelatin (PC)-related peptides were prepared by a conventional solution method and their heavy metal-binding properties were examined. Different from the Cu2+ and Cu+ -binding properties of metallothionein (MT)-related peptides, the Cu2+ and Cu+ -binding properties of PC-related peptides were fairly dependent on structure. It is of interest that gamma-Glu-Cys-Gly (glutathione) exhibited quite different Cu2+ and Cu+ -binding properties from those of other PC-related peptides and its binding abilities were comparable to those of MT-related peptides. The Cd2+ -binding properties of glutathione were similar to those of Cys, and the Cd2+ -binding abilities of PC-related peptides increased in proportion to the increase of gamma-Glu-Cys peptide unit.     

Physico-chemical characterization of metal binding proteins using HPLC-ICP-MS, HPLC-MA-AAS and electrospray-MS

A size exclusion HPLC method was developed and interfaced with ICP-MS detection for determining the metal profiles of commercially available rabbit liver metallothioneins (MT) and metallothionein-like proteins (MLP) extracted from fresh water mussels and hemolyzed osprey blood. The redox state of the cysteine residues was indirectly evaluated via a cadmium saturation approach in the presence or absence of a reducing agent, followed by HPLC-microatomization (MA)-AAS and HPLC-ICP-MS analyses. An electrospray-MS protocol was also developed to accurately measure the molecular weight of rabbit MT isoform II. Nanogram quantities of Cd-MT/MLP were poorly chromatographed on silica based supports. A copolymeric styrene-divinylbenzene size exclusion support provided a symmetrical peak (rabbit MT standard) and linear HPLC-MA-AAS calibration curves [r=0.9988; from the LOD (27 ng, as protein) to about 300×LOD], indicating negligible losses of Cd during the chromatography of trace quantities. Co-injection of Cd²⁺ saturated samples with beta-mercaptoethanol (BMSH) was essential to repress Cd²⁺-support interactions which otherwise induced an undesirable metalaffinity retention mechanism. In the presence of added Cd²⁺, 22 mmol/L BMSH did not significantly compete for Cd²⁺ specifically bound to MT, while preventing non-specific binding to non-thiolic complexing sites. Crude mussel and osprey blood MLP extracts (in cold, deoxygenated Tris-HCl buffer) were obtained by ultracentrifugation (145,000 g) and thermocoagulation/centrifugation, respectively. Incubation with BMSH was prerequisite to obtain a maximum saturation of mussel and osprey blood MLP by Cd²⁺, even for samples conserved (–80° C) in the presence of BMSH (22 mmol/L). These observations indicated that a major proportion of the cysteine residues present in these MLP were oxidized. The assumption of a fully reduced MT/MLP pool binding metals in a definite stoichiometry has been the basis of several quantitative metal binding assays involving the saturation of the thiolic complexing sites with a metallic marker (Ag+, Cd²⁺, or Hg²⁺). Since thiolic agents may interfere, the metal saturation protocols do not include a reducing step to ensure that all cysteines in a MT/MLP extract are available for co-ordination. Given that variations in the redox state of crude MT/MLP extracts may compromise the accuracy of metal saturation assays, it is concluded that the preparation of reference samples certified for total metallothionein content would be desirable.     

Ultrasensitive and Selective Detection of Cd(II) Using ZnSe‐Xanthan Gum Complex/CNT Modified Electrodes

This work describes for the first time the employment of water soluble GSH‐ZnSe QDs stabilized by XG and MWCNT for electrode modification in the detection of Cd ions in a highly sensitive and selective manner resulting from the unique structure and surface chemistry of the used QDs. The surface of a glassy carbon (GC) electrode was modified through casting a thin layer of multiwalled carbon nanotubes (MWCNT) followed by a complex layer of ZnSe quantum dots (QDs) stabilized by xanthan gum (XG). Due to the electrocatalytic properties of MWCNT and electroanalytical performance of ZnSe‐XG complex, the new modified electrode significantly improves the sensitivity and selectivity of Cd(II) detection and exhibits enhanced performance in comparison to bare GC, ZnSe/GC and ZnSe/MWCNT/GC electrodes. Strong interactions between ZnSe QDs and XG resulting from hydrogen bonding and complexing association led to stabilization of ZnSe QDs and higher affinity towards Cd(II) ions adsorption compared to a ZnSe QDs film alone. The modified electrode showed linear response in a wide concentration range from 100 nM to 5 μM (R²=0.9967) along with a high sensitivity of 156.6 nA ⋅ mol⁻¹ ⋅ L⁻¹ and a low detection limit of 20 nM. The electrode shows high selectivity to Cd with negligible interference from other metal ions and salts.     

Determination of curcuminoids in substances and dosage forms by cyclodextrin-mediated capillary electrophoresis with diode array detection

The present work illustrates the potential of the capillary zone electrophoresis (CZE) separation technique coupled with the on-capillary diode array detector (DAD) for highly reliable determination of curcuminoids (curcumin, CUR, demethoxycurcumin, DCUR, and bisdemethoxycurcumin, BCUR) in substances (commercially available plant extract) and pharmaceutical preparation (commercial pharmaceutical capsules) with minimal sample preparation; (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was chosen for an anionic separation of CUR and its structural analogues (DCUR and BCUR) as an appropriate complexing agent (i) providing complete resolution of the curcuminoids and (ii) reducing adsorption of these hydrophobic analytes onto the capillary wall. DAD detection was utilised for characterisation of the composition of the separated zones via differences in the corresponding UV-VIS spectra (scanned at interval of 200–800 nm). Reference and real spectra of the analytes demonstrated that the proposed separation method was sufficiently selective to produce well-separated (i.e. spectrally homogeneous) analyte zones with no interfering compounds present. Successful validation and application of the CZE-DAD method proposed here suggest its routine use in highly effective and reliable analysis of curcuminoids in pharmaceutical samples.     

Speciation of copper, lead and cadmium in aquatic systems by circulating dialysis combined with flame AAS

The assessment of free Cu(II), Pb(II) and Cd(II) ions in the presence of complexed species was realised by a circulating dialysis with Cuprophan planar membranes and subsequent quantification by flame atomic absorption spectrometry. The effect of the flow rate, the time of equilibration, pH and the presence of various complexing agents in the donor solutions were studied. The determination of free Cu(II), Pb(II) and Cd(II) ions in the presence of soil humic substances resulted from the above studies.     

一种新型结构的金属硫蛋白Pb-MT

金属硫蛋白（ｍｅｔａｌｏｔｈｉｏｎｅｉｎｓ,简称ＭＴｓ）是一大类富含巯基的小分子蛋白质（分子量＜９０００）,具有很强的金属结合能力,哺乳动物ＭＴ每分子可结合７个二价金属离子或１２个一价金属离子．ＭＴ的结构一直是科学家关注的热点,其中哺乳动物Ｃｄ７－Ｍ...