Determining PAHs and PCBs in aqueous samples: finding and evaluating sources of error

This work describes the problems that occur during routine multi-step determinations of polyaromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), which can be present at trace levels in water, and identifies sources of analyte losses at particular steps during the analytical procedure. PAH and PCB adsorption onto the walls of the container ranged from 0 to 70%. PAH and PCB recoveries of >70% were achieved during the LLE and SPE extraction steps. During the process of enriching the dichloromethane extract with PAHs and PCBs, based on the gentle evaporation of solvent, losses were <24% and <19%, respectively. Model experiments show that neither isolation of PAHs and PCBs (performed using either LLE or SPE) nor extract enrichment reduce the reliability of PAH and PCB determination. The steps that lead to the greatest loss of analyte are the ones that involve sampling, transport and storage of the water samples.     

Determination of seven nitrobenzene compounds in mainstream cigarette smoke with heart-cutting two-dimensional gas chromatography

A heart-cutting two-dimensional gas chromatography (GC) method was developed for the determination of nitrobenzene compounds (NBCs) in mainstream cigarette smoke. For the method, the particulate matter of cigarette smoke was extracted with cyclohexane, purified with a silica solid-phase extraction (SPE) cartridge and analyzed by heart-cutting two-dimensional GC equipped with two electron capture detectors. The heart-cutting two-dimensional GC was achieved by a single-column GC oven equipped with a microfluidic pressure balanced device (Deans switch). Two-dimensional GC was compared to single-dimensional GC and found to be clearly better for the separation of seven NBCs from a complex smoke matrix. The limits of detection ranged from 1.28 to 9.83 ng/mL, spiked recoveries were between 88.3 and 106.8% and relative standard deviation ranged from 2.79 to 12.78%. The NBCs yields of six kinds of Chinese and international cigarettes brands, which were all smoked according to two smoking protocols (International Organization for Standardization and Health Canada Intense smoking regimens), were determined and compared.     

Solid-phase extraction with C30 bonded silica for analysis of polycyclic aromatic hydrocarbons in airborne particulate matters by gas chromatography-mass spectrometry

A solid-phase extraction (SPE) method using triacontyl bonded silica (C30) as sorbent was developed for the determination of 16 US Environmental Protection Agency polycyclic aromatic hydrocarbons (PAHs) in airborne particulate matters quantitatively by gas chromatography-mass spectrometry (GC-MS). Optimization experiments were conducted using spiked standard aqueous solution of PAHs and real airborne particulates samples aiming to obtain highest SPE recoveries and extraction efficiency. Factors were studied in SPE procedures including the concentration of organic modifier, flow rate of sample loading and elution solvents. The ultrasonication time and solvents were also investigated. Recoveries were in the range of 68-107% for standard PAHs aqueous solution and 61-116% for real spiked sample. Limits of detection (LODs) and limits of quantification (LOQs) with standard solution were in the range of 0.0070-0.21 microgL(-1) and 0.022-0.67 microgL(-1), respectively. The optimized method was successfully applied to the determination of 16 PAHs in real airborne particulate matters.     

Determination of sixteen polycyclic aromatic hydrocarbons in aqueous and solid samples from an Italian wastewater treatment plant

A robust procedure for the determination of 16 US EPA PAHs in both aqueous (e.g. wastewaters, industrial discharges, treated effluents) and solid samples (e.g. suspended solids and sludge) from a wastewater treatment plant (WWTP) is presented. Recovery experiments using different percentages of organic modifier, sorbents and eluting solvent mixtures were carried out in Milli-Q water (1000 mL) spiked with a mixture of the PAH analytes (100 ng/L of each analyte). The solid phase extraction (SPE) procedures applied to spiked waste water samples (1000 mL; 100 ng/L spiking level) permitted simultaneous recovery of all the 16PAHs with yields >70% (6-13% RSD). SPE clean up procedures applied to sewage and stabilized sludge extracts, showed percent recoveries in the range 73-92% (7-13% RSD) and 71-89% (7-12% RSD), respectively. The methods were used for the determination of PAHs in aqueous and solid samples from the WWTP of Fusina (Venice, Italy). Mean concentrations, as the sum of the 16PAHs in aqueous and suspended solid samples, were found to be approx. in the 1.12-4.62 microg/L range. Sewage and stabilized sludge samples contained mean PAH concentrations, as sum of 16 compounds, in the concentration range of 1.44-1.26 mg/kg, respectively. Extraction and clean up procedures for sludge samples were validated using EPA certified reference material IRM-104 (CRM No. 912). Instrumental analyses were performed by coupling HPLC with UV-diode array detection (UV-DAD) and fluorescence detection (FLD).     

在线固相萃取-液相色谱法直接测定水中超痕量多环芳烃

建立了在线固相萃取-液相色谱直接测定水体中16种超痕量多环芳烃（PAHs）的方法。水样经高速离心后，加入适量甲醇，配制成40%（体积分数）甲醇水溶液，直接进样2 mL至在线固相萃取流路，进行萃取富集，再通过阀切换将洗脱的PAHs转移至分析流路进行分离检测。16种PAHs在各自范围内线性关系良好，相关系数均大于0.996；方法的检出限为0.14~12.50 ng/L，其中苯并[a]芘（B（a）P）的检出限为0.38 ng/L。实际水样在10、40和200 ng/L加标水平下的加标回收率为76.1%~134.9%，RSD为0.3%~16.6%。B（a）P在1 ng/L加标水平下的回收率为71.8%~92.7%，RSD为3.9%。结果表明，该方法操作简单，灵敏度高，溶剂消耗量少，可满足水样中PAHs，尤其是B（a）P的超痕量分析要求。     

一种新型固相萃取柱结合超高效液相色谱-串联质谱法选择性富集测定猪肉中的盐酸克伦特罗

发展了一种测定猪肉中盐酸克伦特罗残留的简便、高效、准确的固相萃取-超高效液相色谱-串联质谱(SPE-UPLC-MS/MS)的方法。将搅碎的猪肉样品用5%(v/v)高氯酸超声提取,再以10000 r/min离心15 min后,上清液用SMCX固相萃取柱进行富集和净化。因SMCX是以硅胶为基质兼有反相/强阳离子交换的混合作用模式,因此可以有效地去除复杂基质干扰,达到目标样品的选择性富集和净化的目的。方法学结果表明,该方法在0.25～50 μg/kg范围内具有良好的线性关系,相关系数r为0.9982; 3个添加水平(1.25、12.5、50 μg/kg)的平均回收率为62.2%～ 72.0%,相对标准偏差(RSDs)为4.2%～ 6.1%;检出限(S/N=3)为0.05 μg/kg。所发展的样品前处理和检测方法简单、快速,可用于瘦肉精类成分的选择性富集和分离检测。     

Development of a solid-phase extraction method for the determination of polychlorinated biphenyls in water

Polychlorinated biphenyls (PCBs) in water were extracted with a rebuilt extraction unit using 47 mm C18 solid-phase extraction (SPE) disks. Three types of disks (SPEC, ENVI and Empore) were investigated for the extraction of seven PCBs from 11 reagent water spiked at two concentration levels (20 and 1000 ng/l). The Empore disks produced the best analyte recoveries (91-107% with R.S.D. of 1-8%) at the low concentration level and displayed no leaking tendency. Empore disks were therefore considered superior to ENVI and SPEC disks for the conditions outlined in this work. The obtained extracts were dried and purified in an additional clean-up step using custom-made columns containing Florisil and Na2SO4. For water containing large amounts of organic matter, a pre-filtration was included. Final analysis was carried out on a dual-column GC-electron-capture detection system with on-column injection. The optimised extraction method, including clean-up, was less time-consuming and used less hazardous organic solvents than conventional liquid-liquid extraction (LLE) methods. Recoveries were 92-102% with R.S.D. of 3-8%.     

Determination of organic priority pollutants in the low nanogram-per-litre range in water by solid-phase extraction disk combined with large-volume injection/gas chromatography–mass spectrometry

Polybrominated diphenyl ethers, polychlorinated biphenyls, polycyclic aromatic hydrocarbons and organochlorine pesticides in the low nanogram-per-litre range in water were enriched by solid-phase extraction (SPE) disks and their concentration determined by large-volume injection/gas chromatography–mass spectrometry (LVI/GC-MS). One advantage of using SPE disks in comparison with SPE cartridges is that suspended particulate matter (SPM) does not have to be separated prior to the enrichment step, which saves time and effort. To increase the sensitivity of the method, the SPE disk procedure was combined with LVI/GC-MS, which has not been reported so far for water analysis. The method was calibrated in ranges from 0.25 to 2.5 ng/L and from 2.5 to 25 ng/L. The average recovery was 76 % at an analyte concentration of 2.5 ng/L. The limits of quantification, defined at a signal-to-noise ratio of 6:1, reach from 0.1 to 24.0 ng/L and are up to 400 times lower than previously reported in water analysis. By the developed SPE/LVI/GC-MS method, it is possible to investigate the whole water sample without prior separation of the SPM within 2 h including GC-MS analysis.     

Efficient isolation of polyaromatic fraction from aliphatic compounds in complex extracts using dimethylformamide-pentane partitionings

A liquid-liquid partitioning method was optimized for the rapid and quantitative separation of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) from aliphatic hydrocarbons in complex primary extracts. This technique was based on the selective extraction of PAHs and PCBs from an aliphatic solvent into dimethylformamide (DMF). Partition experiments demonstrated that the optimal performance was achieved with a DMF (5% H2O)-n-pentane binary system. The optimized application of two consecutive DMF (5% H2O)-n-pentane treatments to extracts from two different polluted sediments facilitated the elimination of alkanes and unresolved complex mixture by more than 94% while the average recoveries of spiked deuterated-PAHs and 13C labeled PCBs ranged from 84 to 94 and 75 to 96%, respectively.     

Polycyclic aromatic hydrocarbon analysis in different matrices of the marine environment

Polycyclic aromatic hydrocarbons (PAHs) were determined in marine samples of various types, i.e. seawater, sediment and mussel homogenate samples. The samples were spiked with standard PAH mixtures in both polar (acetonitrile) and non-polar (i-octane) solvents, then extracted. Extraction from seawater was performed by liquid/liquid extraction to hexane (LLE) and with solid phase extraction (SPE) discs. The water samples were filtered and unfiltered seawater, and redistilled water for comparison. The discs with PAHs adsorbed from water samples, and also the sediment and mussel homogenate samples, were extracted with acetonitrile by sonication. PAHs in the disc extracts and from the LLE were cleaned-up using TLC and next determined by GC/MS/IT (with ion-trap) and HPLC-DAD/UV. The analytical procedures were verified with deuterated PAH standard mixtures. The large differences in PAH recoveries (from 12 to 86% for sum, and from 3 to 135% for particular PAHs) do not depend solely on the type of matrix and analytical procedure applied (e.g. standard solvent, volume of evaporated sample), but also on the concentration and molecular structure of the analyte. Usually, only a fraction of each PAH content in the matrix is determined, depending on the particulate matter in seawater and the sorption properties of the solid matrix. The recoveries of deuterated PAHs are higher than those of non-deuterated compounds.     

Comprehensive analysis of polycyclic aromatic hydrocarbons in wastewater using stir bar sorptive extraction and gas chromatography coupled to tandem mass spectrometry

The objective of this study was the optimization and comparison of two extraction methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in wastewater (WW). A distribution study of the target compounds between the aqueous phase and the suspended particulate matter (SPM) has been performed in order to establish whether the analysis of both phases is necessary. In this sense, the feasibility of stir bar sorptive extraction (SBSE) and solid-phase extraction (SPE) for the determination of 24 PAHs in WW samples has been evaluated. The results demonstrated the suitability of SBSE to perform a comprehensive analysis of liquid samples containing high amounts of SPM, such as in the determination of PAHs in WWs. A gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method has been also optimized for the separation and detection of the target compounds, avoiding the co-elution of some groups of isomers, such as benzo[b], [j] and [k] fluoranthenes and indene[1,2,3-cd]pyrene/dibenz[a,h]anthracene. For that purpose, a specific capillary column developed for PAH determination was used. The SBSE procedure was validated and adequate parameters (such as recovery, linearity, precision, limits of detection and quantification) were obtained. Finally, the validated method was applied to the analysis of real samples collected from an experimental WW treatment plant, detecting some PAHs at concentrations in the range 0.007-0.022 μg L(-1).     

Sensitive determination of polycyclic aromatic hydrocarbons in water samples by HPLC coupled with SPE based on graphene functionalized with triethoxysilane

The graphene functionalized with (3‐aminopropyl) triethoxysilane was synthesized by a simple hydrothermal reaction and applied as SPE sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. These sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large specific surface area of nanoparticles, and only 10 mg of sorbents are required to extract PAHs from 100 mL water samples. Several condition parameters, such as eluent and its volume, adsorbent amount, sample volume, sample pH, and sample flow rate, were optimized to achieve good sensitivity and precision. Under the optimized extraction conditions, the method showed good linearity in the range of 1–100 μg/L, repeatability of the extraction (the RSDs were between 1.8 and 2.9%, n = 6), and satisfactory detection limits of 0.029–0.1 μg/L. The recoveries of PAHs spiked in environmental water samples ranged from 84.6 to 109.5%. All these results demonstrated that this new SPE technique was a viable alternative to conventional enrichment techniques for the extraction and analysis of PAHs in complex samples.     

Determination and assessment of estradiol-mimicking compounds in the dissolved and particulate phases of wastewater treatment plant samples

During the last two decades, a large number of publications have clearly shown that anthropogenic compounds that disrupt the endocrine system of wildlife species are a major cause for concern, and this concern has led to a demand for new screening methods. In this work, we have optimized and applied a new method to identify endocrine-disrupting chemicals (EDCs), such as nonylphenol, octylphenol, and their corresponding ethoxylates, 17alpha-ethynylestradiol, bisphenol-A, 17beta-estradiol, and estriol, in sewage samples. For the extraction and preconcentration of all analytes from the dissolved and particulate phases, we used SPE and ultrasonic assisted extraction, respectively. Identification and quantification were achieved by HPLC with fluorescence detection. Satisfactory LODs (between 0.5 and 7.6 ng/L in the dissolved phase and 12.3 and 21.4 ng/g in the particulate phase) and analyte recoveries (between 67 and 102%) were achieved for the target compounds. The optimized method was applied to the determination of EDCs in liquid sewage samples collected from July 2009 to July 2010 from a wastewater treatment plant in Las Palmas de G.C. (Spain). Concentrations of EDCs ranged from <10 to nearly 1300 ng/L in the dissolved phase, and from 0.1 to 7.7 microg/g in the suspended particulate matter.     

ASE-SPE/GC-MS测定土壤中16种PAHs质量控制研究

优化了土壤中16种优控多环芳烃( PAHs)的分析方法,建立了一套完备的质量控制体系,解决了PAHs分析中常见的技术难点,如苯并(a)芘(BaP)回收率低,基质复杂的样品净化效果不理想,萘(Nap)和菲(Phe)挥发损失和环境本底影响等.样品经加速溶剂提取(ASE),固相萃取(SPE)净化,逐级减压浓缩,气相色谱质谱( GC - MS)测定,并以氘代苯并a芘(BaP - d12)作回收率指示物.实验比较了3种正相SPE吸附剂的效果,发现弗罗里硅土对BaP存在明显的降解现象,BaP的定量应使用同位素稀释法,以降低其分析不确定度;氧化铝对PAHs的吸附性过强,不利于样品净化;硅胶最为理想.PAHs的仪器检出限为0.26～5.7 pg,方法检出限为0.067 ～0.97 ng/g(干重),土壤基质加标回收率为71％～ 122％,相对标准偏差为1.6％～8.3％.将该法用于7个电子废物焚烧区域农田土壤样品的测定,PAHs含量在28～ 283 ng/g(干重)之间,样品中BaP-d12的回收率为90％～124％,各项质控指标符合检测要求.     

Multiwalled carbon nanotubes as adsorbents of solid-phase extraction for determination of polycyclic aromatic hydrocarbons in environmental waters coupled with high-performance liquid chromatography

Multiwalled carbon nanotubes (MWCNTs) were used as a novel kind of solid-phase extraction adsorbents in this work as well as an analytical method based on MWCNTs solid-phase extraction (SPE) combined with high-performance liquid chromatography (HPLC) was established for the determination of polycyclic aromatic hydrocarbons (PAHs), some of which belong to typical persistent organic pollutants (POPs) owing to their carcinogenicity and endocrine disrupting activity. Several conditions that probably affected the extraction efficiency including the eluent volume, sample flow rate, sample pH and the sample volume were optimized in detail. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method, and the method was applied to the determination of PAHs in environmental water samples such as river water sample, tap water sample and wastewater sample from the constructed wetland effluent. The experimental results indicated that there were excellent linear relationship between peak area and the concentration of PAHs over the range of 0.04-100 microg L(-1), and the precisions (RSD) were 1.7-4.8% under the optimal conditions. The detection limits of proposed method for the studied PAHs were 0.005-0.058 microg L(-1) (S/N=3). The recoveries of PAHs spiked in environmental water samples ranged from 78.7 to 118.1%. It was concluded that MWCNTs packed cartridge coupled with HPLC was an excellent alternative for the routine analysis of PAHs at trace level.     

Simultaneous extraction of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in agricultural soils by pressurized liquid extraction and determination by gas chromatography coupled to tandem mass spectrometry

A simple and rapid method based on pressurized liquid extraction has been validated for the simultaneous extraction of polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) from agricultural soil samples. Effective extraction was carried out in less than 17 min for all the studied compounds, and good recoveries were obtained for PAHs and PCBs, ranging from 70% to 112%, when blank samples were spiked at 2.5 μg kg⁻¹, except for naphthalene with recoveries close to 40%. The separation and determination were performed by gas chromatography coupled to tandem mass spectrometry using a triple quadrupole mass analyzer. The target compounds were detected by electron impact with selected reaction monitoring, and mass spectrometric conditions were optimized in order to increase selectivity and sensitivity. The developed method was validated, and matrix-matched calibration was used for quantification purposes. Repeatability and interday precision ranged from 0.9% to 16.8% and from 1.6% to 22.3%, respectively. Limits of quantification ranged from 0.07 to 2.50 μg kg⁻¹. The proposed method was applied to the analysis of agricultural soil samples collected from Almeria (Spain), and PAHs and PCBs were detected in some samples at concentrations ranging from 0.1 to 210 μg kg⁻¹.     

The Extraction of Polycyclic Aromatic Hydrocarbons from Atmospheric Particulate Matter Samples by Accelerated Solvent Extraction (ASE)

Abstract

The Accelerated solvent extraction (ASE) of PAHs (23 2- to 6-ring species) spiked onto glass fibre filters (GFFs) was studied as a function of variable extraction solvents, pressure, temperature and extraction times. Acceptable recoveries (85% ± 15%) were obtained for certain combinations of conditions and a tentative method (1500 psi, 150°C, 70:30 hexane:acetone mixture, 7 min heat-up time, 5 min static extraction time, 60% flush volume, 2 static cycles was selected for further testing. However, this method did not prove as effective as the traditional Soxhlet method of extraction when these parameters were used to extract native PAHs from ambient atmospheric particulate matter collected on a GFF by Integrated Atmospheric Deposition Network (IADN) sampling protocols. The extraction recovery study for spiked GFFs was repeated using slightly different extraction conditions: 2000 psi, 100°C, 70:30 hexane:acetone, 5 min heat-up time, 5 min static extraction time, 150% flush volume, 3 static cycles. When this method was applied to the extraction of native PAHs from ambient atmospheric particulate matter collected on GFFs, the results showed equivalent or better recoveries to that of the Soxhlet method. The total time of extraction was 25 min requiring only 30 mL of solvent. This ASE method is presently used to quantitatively determine PAHs in IADN particle-phase samples.     

Simple solid-phase extraction method for determination of polychlorinated biphenyls and selected organochlorine pesticides in human serum

A simple off-line solid-phase extraction (SPE) method for isolation of polychlorinated biphenyls (PCBs) and selected organochlorine pesticides (OCPs) from human serum has been developed. The procedure includes denaturation of serum proteins by a mixture of water-1-propanol, application of the sample by aspiration twice repeatedly through the SPE column and elution with a mixture of n-hexane-dichlormethane. After final clean-up the compounds of interest were analysed by gas chromatography with micro-electron capture detection (GC-microECD). The recoveries achieved for PCB congeners using spiked porcine serum samples were 99-120% and for OCPs 88-115%. Relative standard deviations (RSD) ranged from 3 to 7%. The method was applied to real human serum samples and the recoveries of analytes in the serum were proportionally recalculated considering the recovery of the internal standard PCB-174. PCB-103 served as a syringe standard to correct volume of samples analysed. The aim of this study was to develop an effective off-line SPE procedure by optimization of existing SPE methods to supply laborious, solvent- and time-consuming liquid-liquid extraction (LLE) in routine analytical process.     

Liquid chromatography-tandem mass spectrometry analysis of 17α-trenbolone, 17β-trenbolone and trendione in airborne particulate matter

Trenbolone acetate (TbA) is a potent synthetic anabolic steroid that was approved by the FDA as a growth promoter in beef cattle in 1987. Given the endocrine-modulating activity of TbA and its metabolites in all vertebrates, a sensitive and reliable analytical method is needed to detect TbA and related residues in environmental matrices. We have developed a method that incorporates solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the simultaneous determination of the three major TbA metabolites (trendione, 17β-trenbolone, 17α-trenbolone) in total suspended particulate matter (TSP) samples. Sample preparation involved pressurized liquid extraction followed by cleanup on solid-phase extraction cartridges. The procedure was optimized to obtain maximum recovery and minimum signal suppression/enhancement from matrix effects. Analytes were separated with a Phenomenex Gemini-NX C18 analytical column (150 mm × 2.0 mm, 3 μm particle size) using an aqueous methanol gradient at a flow rate of 0.2 mL/min. Column effluent underwent positive electrospray ionization (ESI). Two or more diagnostic product ions were acquired from analyte specific precursor ions for unambiguous confirmation and quantification. The method detection limit was 3.27-4.87 ng/g of particulate matter (PM). Method accuracy, determined with analyte recoveries, ranged between 68% and 117%, and method precision, expressed as relative standard deviation, was below 15% at spiked levels of 6.67, 33.3, and 167 ng/g PM. Analysis of TSP samples demonstrated the presence of the target species associated with PM in the vicinity of beef cattle feeding operations.     

Determination of monohydroxylated metabolites of polycyclic aromatic hydrocarbons (OH-PAHs) from wastewater-treatment plants

A high-performance liquid chromatography separation coupled with mass spectrometry via an electrospray interface is proposed for the determination of the hydroxylated derivatives of polycyclic aromatic hydrocarbons (OH-PAHs) in treated and untreated wastewaters and suspended solids from sewage treatment plants (STPs). The developed SPE procedure was applied to spiked wastewater samples, with recovery yields (1000?mL; 100?ng?L^?1 spiking level) in the 65–87% (RSD: 6–12%) range for the selected OH-PAHs. The limits of detections ranged between 0.3 and 3.2?ng?L^?1, depending on the selected compound and on the investigated matrix. The proposed method was applied to the determination of the selected analytes in real samples from a sewage-treatment plant (STP). The investigated OH-PAHs were detected mainly in the particulate fraction. The exhibited mean concentrations of positive samples (as the sum of dissolved and particulate matter) in the STP final effluent ranged from 15 to 68?ng?L^?1.