Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Micro- and nanopatterned copper structures using directed self-assembly on templates fabricated from phase-separated mixed Langmuir-Blodgett films

We report a versatile method to confine metal thin films in micro- and nanopatterns using directed self-assembly on the templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The pattern of the mixed LB films can be tuned by adjusting intermolecular interaction between the film-forming molecules in the LB films and by varying the fabrication conditions of the films such as the mixing ratio, subphase temperature, and surface pressure. We use the patterned LB films for templates to confine metal in patterned regions, taking advantage of the difference between the surface free energy of the patterned regions and that of the self-assembled monolayer of the silane coupling agent. Au nanoparticles are confined onto the patterned films as a catalyst for the succeeding Cu electroless deposition. The atomic force microscopic images, Auger electron spectra, and scanning Auger electron maps of a Cu-deposited film show that Cu is selectively deposited on the patterns of phase separation of the original mixed LB films.     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

Characterization of biosensors based on membranes containing a conducting polymer

A new type of biosensor based on the coupling of an enzyme to an ion-selective membrane containing a conducting polymer is evaluated. The results obtained with the enzyme field- effect transistor (ENFET) and the ion-selective electrode (ISE) for the determination of creatinine and urea are compared. The presence of the conducting polymer significantly lowers the detection limit for creatinine by one decade to 10^?7 and 10^?4 M for the ENFET and ISE, respectively. The determination of urea in urine and serum with the ENFET was carried out, and the results correlated well with those obtained by spectrophotometry.     

Biomolecular photodiode consisting of cytochrome c-adsorbed hetero-Langmuir–Blodgett films

Photoinduced electron transfer in biomolecular photodiode consisting of protein-adsorbed hetero-Langmuir–Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a second electron acceptor, a first electron acceptor, an electron sensitizer, and an electron donor, respectively. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the phosphate buffer solution containing cytochrome c. To verify the optimal adsorption conditions of cytochrome c molecules onto the viologen LB layers, the UV-absorption spectrum and atomic force microscopy observations of LB films were performed. Finally, the metal/insulator/metal structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. For photoelectric response properties, the current–voltage characteristic and photoswitching effect of the proposed molecular photodiode were investigated. To verify the charge shift, transient photocurrent of the molecular photodiode was measured.     

The use of polyethyleneimine for fabrication of potentiometric cholinesterase biosensors

Potentiometric biosensors based on butyrylcholinesterase are developed by co-reticulation of the enzyme with glutaraldehyde on an electropolymerized polyethyleneimine film at the electrode surface. The BuChE-electrode was tested as biochemical sensor for detection of an organophosphorus pesticide, trichlorfon in liquid, the detection being based on the enzyme inhibition. The enzyme electrode showed a detection limit for trichlorfon below 10⁻⁷ M.     

Organic vapor sensing properties and characterization of α-naphthylmethacrylate LB thin films

Determination of organic vapor sensing properties of α-Naphthylmethacrylate (α-NMA) monomer based Langmuir-Blodgett (LB) thin films was aimed in this study. LB thin film fabrication was performed on quartz glass and quartz crystal substrates in order to investigate the characterization and organic vapor properties of α-NMA materials by using UV-Visible, Atomic Force Microscopy (AFM) and Quartz Crystal Microbalance (QCM) techniques. π-A isotherm graph was taken and a suitable surface pressure value were primarily determined as 13?mN m^?1 for successful α-NMA LB thin film fabrication. Transfer ratio value was found to be ≥ 0.93 for quartz glass and quartz crystal substrates. The typical frequency shift per layer was obtained as 16.93?Hz/layer and the deposited mass onto a quartz crystal was calculated as 271.30?ng/layer (1.02?ng mm^?2). The sensing responses of α-NMA LB films against dichloromethane, chloroform, toluene and m-xylene were measured by QCM system. Dichloromethane created the maximum shift in the resonance frequency than other organic vapors used in this study. Results exhibited that α-NMA LB thin films were potential candidates for organic vapor sensing applications, especially high sensitive detection of dichloromethane at room temperature.     

Mixed urease/amphiphile LB films and their application for biosensor development

The optimal conditions for the formation of a stable mixed urease/octadecylamine (ODA) film at the air-water interface are determined. This film is efficiently transferred onto the hydrophobized surface of a pH-ISFET, and the features of the urea enzymatic field-effect transistor (ENFET) are determined: detection limit 0.2 mM, response time 15 s, and dynamic range 0-20 mM.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Surface density as a significant parameter for the enzymatic activity of two forms of alkaline phosphatase immobilized on phospholipid Langmuir-Blodgett films

Rat osseous plate alkaline phosphatase, a glycosylphosphatidylinositol (GPI)-anchored phosphomonohydrolase, was immobilized on Langmuir-Blodgett (LB) films. Enzyme solubilization either with polyoxyethylene-9-lauryl ether or with a glycosylphosphatidylinositol-specific phospholipase C resulted in a GPI-anchor-containing and a GPI-anchor-depleted form, respectively. Both forms were adsorbed on dimyristoylphosphatidic acid LB films and restricted to the outermost layer. The surface density and enzyme activity were determined using a quartz crystal microbalance and p-nitrophenylphosphatase activity, respectively. The detergent-solubilized form was co-spread with dimyristoylphosphatidic acid on the air/water interface and transferred to solid supports, providing an enzyme maximum surface density of 530 ng/cm2. Maximal phosphohydrolytic activity, corresponding to 43% of that observed in homogeneous medium, was obtained at a surface density of 179 ng/cm2. The phospholipase C-solubilized form was adsorbed directly from solution, reaching a maximum surface density of 1541 ng/cm2, although the phosphomonohydrolase activity was 10 times lower than that obtained for the anchor-containing form. The combined analysis of surface density and enzymatic activity suggests that the alignment of the protein molecules on the LB lipid films induced by the glycosylphosphatidylinositol anchor facilitates the access of the substrate to the active site. This access is hampered by increasing enzyme surface densities and depends on a specific orientation of the adsorbed enzyme.     

Probing chitosan and phospholipid interactions using Langmuir and Langmuir-Blodgett films as cell membrane models

The interaction between chitosan and Langmuir and Langmuir-Blodgett (LB) films of dimyristoyl phosphatidic acid (DMPA) is investigated, with the films serving as simplified cell membrane models. At the air-water interface, chitosan modulates the structural properties of DMPA monolayers, causing expansion and decreasing the monolayer elasticity. As the surface pressure increased, some chitosan molecules remained at the interface, but others were expelled. Chitosan could be transferred onto solid supports alongside DMPA using the LB technique, as confirmed by infrared spectroscopy and quartz crystal microbalance measurements. The analysis of sum-frequency vibration spectroscopy data for the LB films combined with surface potential measurements for the monolayers pointed to chitosan inducing the ordering of the DMPA alkyl chains. Furthermore, the morphology of DMPA LB films, studied with atomic force microscopy, was affected significantly by the incorporation of chitosan, with the mixed chitosan-DMPA films displaying considerably higher thickness and roughness, in addition to chitosan aggregates. Because chitosan affected DMPA films even at pressures characteristic of cell membranes, we believe this study may help elucidate the role of chitosan in biological systems.     

Spectroscopic studies of Langmuir-Blodgett films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its mixtures with a liquid crystal

Langmuir (L) and Langmuir-Blodgett (LB) films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-mean molecular area isotherms of L films, the alignment of the molecules on the air-water interface has been estimated. The L films were transferred onto quartz plates at surface pressures below the collapse point. The absorption and fluorescence spectra of LB films, obtained using unpolarized and linearly polarized light, were recorded. The results obtained have led to conclusions on the arrangement of the dye and liquid crystal molecules on the air-solid substrate interface. The fluorescence spectra revealed the formation of excited dimers in LB films.     

Self-organization of a wedge-shaped surfactant in monolayers and multilayers

The self-organization behavior of a wedge-shaped surfactant, disodium-3,4,5-tris(dodecyloxy)phenylmethylphosphonate, was studied in Langmuir monolayers (at the air-water interface), Langmuir-Blodgett (LB) monolayers and multilayers, and films adsorbed spontaneously from isooctane solution onto a mica substrate (self-assembled films). This compound forms an inverted hexagonal lyotropic liquid crystal phase in the bulk and in thick adsorbed films. Surface pressure isotherm and Brewster angle microscope (BAM) studies of Langmuir monolayers revealed three phases: gas (G), liquid expanded (LE), and liquid condensed (LC). The surface pressure-temperature phase diagram was determined in detail; a triple point was found at approximately 10 degrees C. Atomic force microscope (AFM) images of LB monolayers transferred from various regions of the phase diagram were consistent with the BAM images and indicated that the LE regions are approximately 0.5 nm thinner than the LC regions. AFM images were also obtained of self-assembled films after various adsorption times. For short adsorption times, when monolayer self-assembly was incomplete, the film topography indicated the coexistence of two distinct monolayer phases. The height difference between these two phases was again 0.5 nm, suggesting a correspondence with the LE/LC coexistence observed in the Langmuir monolayers. For longer immersion times, adsorbed multilayers assembled into highly organized periodic arrays of inverse cylindrical micelles. Similar periodic structures, with the same repeat distance of 4.5 nm, were also observed in three-layer LB films. However, the regions of organized periodic structure were much smaller and more poorly correlated in the LB multilayers than in the films adsorbed from solution. Collectively, these observations indicate a high degree of similarity between the molecular organization in Langmuir layers/LB films and adsorbed self-assembled films. In both cases, monolayers progress through an LE phase, into LE/LC coexistence, and finally into LC phase as surface density increases. Following the deposition of an additional bilayer, the film reorganizes to form an array of inverted cylindrical micelles.     

Characterization of N-cyclohexylmethacrylamide LB thin films for room temperature vapor sensor application

This study reports the synthesis, characterization and gas sensing applications of N-cyclohexylmethacrylamide (NCMA) monomer material using FT-IR, ¹H and ¹³C NMR, UV-visible spectroscopy, Quartz Crystal Microbalance (QCM) and Langmuir-Blodgett (LB) thin film deposition techniques. The thin film deposition conditions of NCMA monomer material, which are prepared by LB film technique, are characterized by UV-visible spectroscopy and QCM system. The sensing behaviors of the LB film with respect to volatile organic compounds (VOCs) at room temperature are investigated. Surface pressure change as a function of surface area of NCMA molecule at the water surface shows a well-organized and stable monolayer at 18 mN m^?1 surface pressure value for LB film deposition. Transfer ratio values are found to be ≥ 0.94 for quartz glass and ≥ 0.93 for quartz crystal substrate. The typical frequency shift per layer is obtained 20.10 Hz/layer and the deposited mass onto a quartz crystal is calculated as 824.62 ng/layer. The sensing responses of the LB films against chloroform, dichloromethane, acetone, toluene, benzene and ethanol are measured by QCM system. The sensitivities of the NCMA LB film sensor are determined between 0.085 and 0.029 Hz ppm^?1. Sensitivities with detection limits are between 35.29 and 100.33 ppm against organic vapors. These results can be concluded that the monomer LB film sample is found to be significantly more sensitive to chloroform and dichloromethane vapors than others organic vapors used in this work. This material may find potential applications in the development of room temperature organic vapor sensing.     

A comparative Langmuir-Blodgett study on a set of covalently linked porphyrin-based amphiphiles: a detailed atomic force microscopic study

A set of covalently linked phenyl-amidophenyl-substituted porphyrin amphiphiles with n-C15H31 tails have been synthesized and completely characterized. These amphiphiles form good Langmuir-Blodgett (LB) films at the air/water interface. Mean molecular areas for the series were measured from the isotherms and found to increase as the number of aliphatic chains increased from one to four. No influence of the subphase pH was observed on the isotherms. LB films can be transferred successfully onto different solid surfaces. The LB films were characterized using tapping mode atomic force microscopy (AFM). Bis-, tris-, and tetra-substituted porphyrins were found to be fairly good film-forming amphiphiles, whereas irregular aggregates were seen in the case of the monosubstituted porphyrin amphiphile. Multilayers were also formed with tetra-substituted amphiphiles on mica. Detailed AFM studies of tetra-substituted amphiphiles have been carried out to investigate the effect of preparation procedure and solid substrates on film formation and transfer. The absorption and fluorescence spectra for the amphiphiles in solution and LB films deposited onto mica and glass were recorded, which demonstrated the successful transfer of LB films onto the substrates and provided more information about the arrangement of porphyrin molecules within the LB films. For comparison, self-assembled monolayers (SAMs) and the cast thin films of the amphiphiles were prepared and characterized.     

由组分可控的LB膜前驱物法制备Y2O3稳定立方相ZrO2的超薄陶瓷膜

由有机LB膜技术发展了一种制备组分、厚度可控的无机超薄陶瓷膜的方法.以Zr、 Y的β-二酮络合物的作为"表面离子"代替传统的亚相离子,沉积它们与花生酸的混合LB膜.并将它作为前驱物,经臭氧处理和热处理,成功制得了Y2O3稳定的立方相ZrO2超薄膜(YSZ).用X射线衍射(XRD)、 X射线光电子能谱(XPS)等手段研究了YSZ薄膜的相结构和其组成.结果表明,超薄陶瓷膜中Zr与Y的含量比率控制得很好,且形成Y2O3稳定的立方相ZrO2.说明这种方法可以成功地用来制备组分和膜厚均可控的纳米陶瓷膜.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Micellization of PEO/PS block copolymers at the air/water interface: a simple model for predicting the size and aggregation number of circular surface micelles

Isotherms of monolayers of poly(ethylene oxide) (PEO) and polystyrene (PS) triblock copolymers spread at the air/water interface were obtained by film balance technique. In a low concentration regime, the PEO segments surrounding the PS cores behave the same way as in monolayers of PEO homopolymers. Langmuir-Blodgett (LB) films prepared by transferring the monolayers onto mica at various surface pressures were analyzed by atomic force microscopy (AFM). The results reveal that these block copolymers form micelles at the air/water interface. Within the micelles, the PS blocks act as anchoring structures at the interface. In several cases, aggregation patterns were modified by the dewetting processes that occur in Langmuir-Blodgett films transferred to solid substrates. High transfer surface pressures and metastable states favored these changes in morphology. A flowerlike surface micelle model is proposed to explain the organization of the surface circular micelles. The model can be generalized and applied to diblock copolymers as well. The model permits prediction of the aggregation number and the size of circular surface micelles formed by PEO/PS block copolymers at the air/water interface.     

Directionally oriented LB films of an OPE derivative: assembly, characterization, and electrical properties

Langmuir films have been fabricated from 4-[4'-(4'-thioacetyl-phenyleneethynylene)-phenyleneethynylene]-aniline (NOPES) after cleavage of the thioacetyl protecting group. Characterization by surface pressure vs area per molecule isotherms and Brewster angle microscopy reveal the formation of a high quality monolayer at the air-water interface. One layer Langmuir-Blodgett (LB) films were readily fabricated by the transfer of the NOPES Langmuir film onto solid substrates. X-ray photoelectron spectroscopy (XPS), surface polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS), and quartz crystal microbalance (QCM) experiments conclusively demonstrate the formation of one layer LB films in which the functional group associated with binding to the substrate can be tailored by the film transfer conditions. Using LB methods this molecule could be transferred to gold samples with either the amine or thiol group attached to the gold surface. The amine group is directly attached to the gold substrate (Au-NH(2)-OPE-SH) when the substrate is initially immersed in the subphase and withdrawn during the transfer process; in contrast, monomolecular films in which the thiolate group is attached to the gold substrate (Au-S-OPE-NH(2)) are obtained when the substrate is initially out of the subphase and immersed during the transfer process. The morphology of these films was analyzed by atomic force microscopy (AFM), showing the formation of homogeneous layers. Film homogeneity was confirmed by cyclic voltammetry, which revealed a large passivation of gold electrodes covered by NOPES monolayers. Electrical properties for both polar orientated junctions have been investigated by scanning tunnelling microscopy (STM), with both orientations featuring a nonrectifying behavior.     

Surface enhanced fluorescence and Raman imaging of Langmuir-Blodgett azopolymer films

The spectroscopic properties and surface-enhanced spectra of Langmuir-Blodgett (LB) films of methacrylic homopolymer (HPDR13) are presented. It is shown that LB film displays strong fluorescence attributed to the spatial restrictions imposed by its structure. The emission is observed in conjunction with photoisomerization, a process clearly demonstrated by the formation of surface-relief gratings in the LB film [C.R. Mendon?a et al., Macromolecules 32 (1999) 1493]. Surface-enhanced Raman scattering (SERS), Surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF) were observed for LB films of HPDR13 deposited onto silver island films. SERS measurements were also carried out on a sample fabricated with one monolayer LB film deposited onto silver islands followed by one overlayer of silver (LB sandwiched between two layers of silver islands). The polymer interacts very weakly with the metal surface (physisorption), and the enhancement effect is determined by the local electric field enhancement. The strong SERS and SERRS signals were suitable for micro-Raman imaging. Line, area mapping and global images of the LB monolayer on silver island are reported. The transfer ratio in the fabrication of the LB suggests a homogeneous coating of the silver islands, thereby the chemical images show the variation of the SERS intensity due to surface enhancement.