Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Synthesis of functionalized arylpyridines and -pyrimidines by domino [4+2]/retro [4+2] cycloadditions of electron-rich dienes with alkynylpyridines and -pyrimidines

Aryl-substituted pyridines and pyrimidines were prepared by [4+2] cycloadditions of alkynyl-substituted pyridines and -pyrimidines with electron-rich dienes. The reactions proceed by formation of a bridged cycloadduct and subsequent thermal extrusion of ethylene. The pyridine moiety plays a crucial role for the success of the reaction.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Synthesis of isoindolinones: Intramolecular [4+2] cycloaddition/retro [4+2] of pyridone propiolamides

A new synthesis of isoindolinones was discovered during a screening campaign aimed at the development of novel methods for the synthesis of pyridone-EZH2 inhibitor analogues. The reaction proceeds via an intramolecular [4+2] cycloaddition of a pyridone with a tethered propiolamide moiety followed by extrusion of isocyanic acid. The discovery, optimization, and scope of the methodology are described.     

Rhodium-catalyzed intramolecular [4 + 2] cycloadditions of alkynyl halides

[reaction: see text] Cationic rhodium(I)-catalyzed intramolecular [4 + 2] cycloadditions of diene-tethered alkynyl halides were found to occur in good yields (70-87%). The halide moiety is compatible with the cycloaddition reactions, and no oxidative insertion to the alkynyl halide was observed. The halogen-containing cycloadducts could be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition.     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

Tandem double intramolecular [4 + 2]/[3 + 2] cycloadditions of nitroalkenes

[reaction: see text]. A new class of tandem [4 + 2]/[3 + 2] cycloadditions of nitroalkenes is described in which both pericyclic processes are intramolecular. Two subclasses of intra [4 + 2]/intra [3 + 2] cycloadditions have been explored in which the dipolarophile is tethered at either C(5) or C(6) of the nitronate. For both families of precursors, the cycloadditions occur in good yield and are found to be highly regio- and stereoselective. This method converts linear polyenes to functionalized polycyclic systems bearing up to six stereogenic centers.     

Rhodium catalysed [2+2+2] cycloadditions of acetylenes

Wilkinson's catalyst RhCl(PPh₃)₃ is an effective catalyst (0.5 – 2 mole %) for the rapid intermolecular trimerisation of 1,6-heptadiynes with monoacetylenes under mild conditions.     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Photoinduced [4 + 4] cycloadditions of o-quinones with oxazoles

[reaction: see text] Photocycloadditions of 9,10-phenanthraquinone (PQ) with oxazoles (1a and 1b) gave [4 + 4] products 2 with the O=C-C=O functionality in PQ and the 2-azadiene moiety in oxazole as 4pi addends. Photoreactions of 1-acetylisatin (IS) with 1a, 1c, and 1d gave [4 + 4] product A, which underwent further [2 + 2] reactions with another (3)IS to furnish 5. These regioselective and diastereoselective [4 + 4] photocycloadditions are rationalized by the intervening of the key conformers for ISC and bond formation of the most stable 1,6-diradical intermediates.     

Frontier-orbital analyses of ketene [2+2] cycloadditions

Twelve kinds of ketene [2+2] cycloadditions have been investigated by ab initio calculations. They are composed of four ketenes (Y–HC=C=O, Y=H, NH₂, Cl, and CN) and three isoelectronic ketenophiles (ethylene, methylenimine, and formaldehyde). All the transition state geometries obtained here are not different significantly, but the extent of formation of two covalent bonds differs appreciably. The difference is attributable to the degree of the charge transfer interactions. One is the interaction from the π orbital and/or the lone pair orbital of a ketenophile to the LUMO of a ketene (dominant charge transfer, CT1). The other is that from the HOMO of the ketene to the π* orbital of the ketenophile (second dominant charge transfer, ct1). CT1 contributes to the formation of only one covalent bond, and ct1 does to the formation of the other. This independent function is characteristic of ketene [2+2] cycloadditions. They are not concerned with the orbital phase. We also have examined Fukui's postulate that the deformation of particular frontier orbitals causes the reaction progress. The role has been verified both by configuration analyses along the intrinsic reaction coordinate of the ketene-ethylene reaction and by the examination of distortions of frontier-orbital shapes along the low-frequency vibrational modes. Received: 25 June 1998 / Accepted: 28 August 1998 / Published online: 11 November 1998     

Synthetic studies and mechanistic insight in nickel-catalyzed [4+2+1] cycloadditions

A new nickel-catalyzed procedure for the [4+2+1] cycloaddition of (trimethylsilyl)diazomethane with alkynes tethered to dienes has been developed. A broad range of unsaturated substrates participate in the sequence, and stereoselectivities are generally excellent. Stereochemical studies provided evidence for a mechanism that involves the [3,3] sigmatropic rearrangement of divinylcyclopropanes.     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Silver-catalyzed [2 + 2] cycloadditions of siloxy alkynes

We have described the first [2 + 2] cycloadditions of siloxy alkynes with a range of unsaturated carbonyl compounds. The reactions are efficiently promoted by substoichiometric amount of silver trifluoromethanesulfonimide and display excellent regio- and diastereoselectivity combined with a broad substrate scope. Our studies have established unambiguously the stepwise mechanism of this process and provided evidence for a novel role of silver in the catalytic cycle of the reaction, which involves silver-based complexation and activation of siloxy alkyne toward the subsequent 1,4-addition.     

Endoperoxide synthesis by photocatalytic aerobic [2 + 2 + 2] cycloadditions

Structurally novel endoperoxides can be sythesized by the photocatalytic cyclotrimerization of bis(styrene) substrates with molecular oxygen. The optimal catalyst for this process is Ru(bpz)(3)(2+), which is a markedly more efficient catalyst for these photooxygention reactions than conventional organic photosensitizers. The 1,2-dioxolane products are amenable to synthetic manipulation and can be easily processed to 1,4-diols and γ-hydroxyketones. An initial screen of the biological activity of these compounds reveals promising inhibition of cancer cell growth.