Reaction of trans-[Pt(H)2(PCy3)2] with C60 reductive elimination of H2 and formation of [Pt(PCy3)2(η-C60)]

Reaction of trans-[Pt(H)₂(PCy₃)₂], 1, with [60]fullerene at room temperature affords [Pt(PCy₃)₂(η²-C₆₀)], 2, in nearly quantitative yield. The most probable reaction pattern is the insertion of a fullerene 6,6 junction onto a Pt-H bond yielding an η¹ alkyl derivative which, after hydrogen extrusion, gives 2. On the other hand, addition of 1 to different electron-deficient olefins, such as dimethyl maleate and fumarate, furnishes mixtures of both η¹ metal—alkyl and η² metal—olefin derivatives. If tetrachloroethylene is used as 2π component, trans-[PtCl(H)(PCy₃)₂] forms exclusively.     

Density functional studies of influences of Ni triad metals and solvents on oxidative addition of MeI to [M(CH3)2(NH3)2] complexes and C-C reductive elimination from [M(CH3)3(NH3)2I] complexes

Three metal square planar complexes of the type [M(CH₃)₂(NH₃)₂] (M = Ni, Pd, Pt), with a systematic variation in the metals, are chosen to investigating their S_N2-type oxidative addition reactions with methyl iodide by using the B3LYP levels of theory. The oxidative addition was found to take place via a transition state with a nearly linear arrangement of the I-CH₃-M moiety. Solvation effects in these oxidative addition reactions were also investigated. Considering the nature of the metal centre and solvation effects, the following conclusions emerge: (i) addition of MeI is exothermic for all three metals, and Pt is predicted to react with a much lower barrier than either Pd or Ni. The results describe that the MeI addition would be expected to be more favourable with the complex bearing the third-row metal (platinum) as compared to the other triad metals, nickel or palladium, in which case a more strongly bound MeI adduct is formed with a lower activation barriers and the reaction being more exothermic; (ii) the reaction is very difficult to occur in low polar solvents, such as benzene, due to the high barrier which is induced by dissociation of iodide anion from methyl group, but the reaction easily occurs in polar solvents, such as acetonitrile; this is attributed to the ability of polar solvents to solvate and therefore stabilize the related polar intermediate ion pair. Ethane reductive elimination from the M(VI) complexes fac-[M(CH₃)₃(NH₃)₂I] were also studied, indicating that the Ni(IV) and Pd(IV) complexes are very prone to undergo the reductive elimination while the Pt(IV) analogous is less reactive towards the reductive elimination. The results indicate that in contrast to the Me-Me reductive elimination, the S_N2 oxidative addition reaction of MeI to M(II) is much less sensitive to the nature of the metal centre, suggesting that the nucleophilicity of M(II) in [M(CH₃)₂(NH₃)₂] does not change significantly as one moves from M = Ni to Pt.     

Theoretical studies of the oxidative addition of PhBr to Pd(PX3)2 and Pd(X2PCH2CH2PX2) (X = Me, H, Cl)

The density functional theory calculations were used to study the influence of the substituent at P on the oxidative addition of PhBr to Pd(PX₃)₂ and Pd(X₂PCH₂CH₂PX₂) where X = Me, H, Cl. It was shown that the C_ipso-Br activation energy by Pd(PX₃)₂ correlates well with the rigidity of the X₃P-Pd-PX₃ angle and increases via the trend X = Cl < H < Me. The more rigid the X₃P-Pd-PX₃ angle is, the higher the oxidative addition barrier is. The exothermicity of this reaction also increases via the same sequence X = Cl < H < Me. The trend in the exothermicity is a result of the Pd(II)-PX₃ bond strength increasing faster than the Pd(0)-PX₃ bond strength upon going from X = Cl to Me. Contrary to the trend in the barrier to the oxidative addition of PhBr to Pd(PX₃)₂, the C_ipso-Br activation energy by Pd(X₂PCH₂CH₂PX₂) decreases in the following order X = Cl > H > Me. This trend correlates well with the filled d_π orbital energy of the metal center. For a given X, the oxidative addition reaction energy was found to be more exothermic for the case of X₂PCH₂CH₂PX₂ than for the case of PX₃. This effect is especially more important for the strong electron donating phosphine ligands (X = Me) than for the weak electron donating phosphine ligands (X = Cl).     

Theoretical Studies on Dehydrogenation Reactions in Mg2(BH4)2(NH2)2 Compounds

Borohydrides have been recently hightlighted as prospective new materials due to their high gravimetric capacities for hydrogen storage. It is, therefore, important to under-stand the underlying dehydrogenation mechanisms for further development of these ma-terials. We present a systematic theoretical investigation on the dehydrogenation mecha-nisms of theMg₂(BH₄)₂(NH₂)₂ compounds. We found that dehydrogenation takes place most likely via the intermolecular process, which is favorable both kinetically and thermo-dynamically in comparison with that of the intramolecular process. The dehydrogenation of Mg₂(BH₄)₂(NH₂)₂ initially takes place via the direct combination of the hydridic H in BH₄^- and the protic H in NH₂^-, followed by the formation of Mg-H and subsequent ionic recombination of Mg-H^δ- …H^δ+N.     

Carbon-carbon and carbon-chlorine bond formation on reaction of iodine(III) reagents with the bis(alkynyl)palladium(II) motif, and structural chemistry of trans-Pd(CC-o-Tol)2(PMe2Ph)2] and trans-[PdCl(CC-o-Tol)(PMe2Ph)2]

Trans-di(ortho-tolylethynyl)bis(dimethylphenylphosphine)palladium(II) reacts above −20 °C with the iodonium reagent IPhCl₂ to give predominantly o-Tol-CC-Cl, above 15 °C with IPh₂(OTf) (OTf = triflate) to give o-Tol-CC-Ph and (o-Tol-CC)₂ in ca. 3:1 ratio, and above 10 °C with IPh(CCR)(OTf) (R = Bu^t, SiMe₃) to give predominantly o-Tol-CC-CC-R and (o-Tol-CC)₂. ³¹P NMR spectra provide evidence for detection of intermediates. The complexes trans-[Pd(CC-o-Tol)₂(PMe₂Ph)₂] and trans-[PdCl(CC-o-Tol)(PMe₂Ph)₂] are obtained on reaction of trans-[PdCl₂(PMe₂Ph)₂] with Li(CC-o-Tol) and o-Tol-CCH/Et₃N, respectively, and have been characterised by X-ray crystallography.     

Reductive elimination reaction of rhenium complexes trans-(η-C5Me5)Re(CO)2(chloroaryl)Cl

Thermal reaction of the chloroaryl-chloride complexes trans-(η⁵-C₅Me₅)Re(CO)₂(Ar^Cl)Cl (Ar^Cl = 3-ClC₆H₄, 3-ClC₆H₃(4-Me) and 3,5-Cl₂C₆H₃) in acetonitrile did not interconvert to the cis isomer, instead the complex ReCl(CO)₂(NCMe)₃ and the corresponding 5-Ar^Cl-1,2,3,4,5-pentamethylcyclopentadiene were formed. Similar reductive elimination products were obtained when the starting rhenium complexes were reacted with trimethylphosphite in toluene.     

Reductive elimination of halogens assisted by phosphine ligands in Fe(CO)4X2 (X = I, Br) complexes

Fe(CO)₄X₂ complexes [X = I (1), Br(1′)] react with phosphine ligands L (L = PMe₃, PEt₃, PMe₂Ph, PMePh₂, PPh₃) via a two-step mechanism: in the first step fac-Fe(CO)₃LX₂ complexes are formed; in the second step two parallel pathways, a and b, are observed; in pathway a, reductive elimination with formation of equimolar amounts of Fe(CO)₃L₂ (5) and phosphonium salts [LX]⁺X⁻ is observed; in pathway b, disubstituted dihalide complexes cis,trans,cis-Fe(CO)₂L₂X₂ are formed. The relative weights of pathways a and b depend on the basicity, steric hindrance and concentration of ligand L, on the nature of the halogen and on temperature. A radical mechanism which accounts for most of the experimental results is proposed.     

Pd(111), Pd(100)及Pd(110)表面H2和O2直接合成H2O2的密度泛函理论研究

采用周期性密度泛函理论研究了H₂和O₂在Pd(111),Pd(100)及Pd(110)表面上直接合成H₂O₂的反应机理,对反应的主要基元步骤进行了计算和分析.结果表明,Pd(111)表面对H₂O₂直接合成的催化选择性最好,表面原子密度较低的Pd(100)表面和Pd(110)表面上含有O-O键的表面物种解离严重,不利于H₂O₂的生成.H₂O₂的选择性与含有O-O键表面物种的O-O键能和表面物种的结合能有关.含有O-O键的表面物种在表面的结合能越大,越容易发生解离,不利于形成H₂O₂.     

CpRu(PH3)2SH与HNCS 的模型化反应机理

应用密度泛函理论(DFT), 通过CpRu(PH3)2SH(Cp=环戊二烯基)与HNCS的模型化反应, 探讨了CpRu-(PPh3)2SH与RNCS(R=Ph, 1-naphthyl)反应生成CpRu(PPh3)S2CNHR的两种可能的反应机理. 一种可能的机理是, 一个PH3配体先从反应物CpRu(PH3)2SH解离出来, 得到一个16e中间体, 然后经过一个氢转移反应, 得到产物; 另一种可能的机理是, 先经过一个氢转移反应, 然后一个PH3配体再从金属中心解离出来, 得到产物. 通过分析两种机理的势能曲线发现, 反应的决速步骤为从硫原子到氮原子的氢迁移过程. 第一种反应机理中反应的最高活化能明显比第二种反应机理的最高活化能高. 因此, 我们预测反应倾向于先发生氢迁移, 然后配体PH3再从金属中心上解离出来. 在该反应机理中, 尽管和产物相连的中间体稳定性稍高于产物, 由于熵效应致使最终产物仍然是实验中所得到的产物.     

Formation and structural characterization of novel polynuclear palladium selenolato complexes [Pd3Se(SePh)3(PPh3)3]Cl and [Pd6Cl2Se4(SePh)2(PPh3)6]

In addition to well-known dinuclear phenylselenolato palladium complexes, the reaction of [PdCl₂(PPh₃)₂] and NaSePh affords small amounts of novel trinuclear and hexanuclear complexes [Pd₃Se(SePh)₃(PPh₃)₃]Cl (1) and [Pd₆Cl₂Se₄(SePh)₂(PPh₃)₆] (2). Complex 1 is triclinic, P1?, a=13.6310(2), b=16.2596(2), c=16.9899(3) Å, α=83.1738(5), β=78.9882(5), γ=78.7635(5)°. Complex 2 is monoclinic, C2/c, a=25.7165(9), b=17.6426(8), c=27.9151(14) Å, β=110.513(2)°. There are no structural forerunners for 1, but the hexanuclear complex 2 is isostructural with [Pd₆Cl₂Te₄(TeR)₂(PPh₃)₆] (R=Ph, C₄H₃S) that have been observed as one of the products in the oxidative addition of R₂Te₂ to [Pd(PPh₃)₄]. Mononuclear palladium complexes may play a significant role as building blocks in the formation of the polynuclear complexes.     

Comment on “Theoretical studies on the ground states in [M(terpyridine)2] and [M(4-(4-(t-butyl)phenyl)terpyridine)2] (M = Fe, Ru, Os) and excited states in [Ru(terpyridine)2] using density functional theory”

The nature of the first excited state of [Fe(terpyridine)₂]²⁺ has been reinvestigated. In contrast to previous findings, it is metal-to-ligand charge transfer in nature, thus fitting in the series of the Ru and Os complexes.     

Stereoselective C-X and regioselective C-H activation to,and selective C(sp2)-C(sp3) reductive elimination from,platinum compounds with thiophene-derived ligands

Several thiophene-based N^C ligands were synthesized. Strategically, a bromide was incorporated on the 2-position of the thiophene ring. When allowed to react with the platinum tetramethyl dimer, [Pt₂Me₄(µ-SMe₂)₂], platinum(IV) platinacycles were formed by oxidative addition of the C(sp²)-X bond. These platinum(IV) compounds were characterized by NMR and HRMS. The platinum (IV) compounds were subsequently subjected to thermolysis. A series of reactions occurred, including selective C-C reduction elimination and selective C-H oxidative addition, giving mixtures of platinum(II) products with varying degrees of regioselectivity.     

An ab initio and density functional theory study of the dimethylzinc-hydrogen selenide adduct: (CH3)2Zn:SeH2

The molecular structure (equilibrium geometry) and binding energy of the dimethylzinc (DMZn)-hydrogen selenide (H₂Se) adduct, (CH₃)₂Zn:SeH₂, have been computed with ab initio molecular orbital and density functional theory (DFT) methods and, where possible, compared with experimental results. The structure of the precursors DMZn and H₂Se are perturbed to only a small extent upon adduct formation. (CH₃)₂Zn:SeH₂ was found to be 3 kcal mol⁻¹ less stable than the precursors at the B3LYP/6-311 + G(2d,p)//B3LYP/6-311 + G(2d,p) level of computation, indicating that the (CH₃)₂Zn:SeH₂ adduct is unlikely to be a stable gas-phase species under chemical vapour deposition conditions. Further calculations at the B3LYP/6-311 + G(2d,p)//B3LYP/6-311 + G(2d,p) level of computation suggest that the 1:2 adduct species, (CH₃)₂Zn:(SeH₂)₂, is much less stable than the 1:1 adduct and consequently the precursors by 19 kcal mol⁻¹.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

NMR approach for the identification of dinuclear and mononuclear complexes: The first detection of [Pd(SPh)2(PPh3)2] and [Pd2(SPh)4(PPh3)2] - The intermediate complexes in the catalytic carbon-sulfur bond formation reaction

In the present study we have analyzed the nature of palladium complexes in the catalytic system for selective carbon-sulfur bond formation via the addition of S-S and S-H bonds to alkynes. For the first time the mononuclear and dinuclear palladium complexes were clearly detected by DOSY NMR under the catalytic conditions. It was demonstrated that the concentration of these palladium complexes strongly depends on the amount of phosphine ligand available under reaction conditions.     

Conformation of N,N′-bis (2,6-dimethylmorpholino), N″-dichloroacetyl phosphoric triamide: CHCl2C(O)NHP(O)[2,6(CH3)2(NC4H6O)]2. NMR and ab initio studies

Using phosphorus pentachloride as a substrate, a new carbacyclamidophosphate, N,N″-bis (2,6-dimethylmorpholino), N″-dichloroacetyl phosphoric triamide (1) has been synthesized and characterized by ¹H, ³¹P and ¹³C NMR, IR spectroscopy and elemental analysis. Due to the presence of methyl disubstituted morpholine rings and the dichloroacetamide group, several conformers can be considered for this molecule. The ³¹P{¹H} NMR spectra for the isomeric mixture of synthesized compound showed four signals with the ratio 67.1; 19.0; 12.2; 1.7, which indicates four independent conformers. The ¹H NMR spectra confirmed these results. The conformational space and the molecular geometry of the molecule in the gaseous phase have been studied using the B3LYP method of approximation, with 6-31G and 6-311++G^** basis sets.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

过渡金属铁配合物Fe(CO)_(5-x)(PR_3)_x的结构与性质的理论研究

采用密度泛函理论(DFT)对一系列低价铁化合物Fe(CO)_(5-x)(PR_3)_x(x=1~3,R=H,F,Me)的几何结构、电子结构、成键特点以及热力学性质进行了理论研究。结果表明引入膦配体后不会造成Fe(CO)x(PR_3)_(5-x)的几何结构畸变,为略扭曲的三角双锥形。自然键轨道(NBO)分析显示,膦配体与羰基铁基团间存在电荷转移,有效增强Fe-CO之间的共价作用。多数稳定结构Fe(CO)x(PR_3)_(5-x)的第一膦配体解离能要比第一羰基解离能低,预示Fe(CO)_(5-x)(PR_3)_x的反应活性比Fe(CO)5有明显提高。     

过渡金属铁配合物Fe(CO)5-x(PR3)x的结构与性质的理论研究

采用密度泛函理论（DFT）对一系列低价铁化合物Fe（CO）_5-x（PR₃）_x（x=1~3,R=H,F,Me）的几何结构、电子结构、成键特点以及热力学性质进行了理论研究。结果表明引入膦配体后不会造成Fe（CO）_x（PR₃）_5-x的几何结构畸变,为略扭曲的三角双锥形。自然键轨道（NBO）分析显示,膦配体与羰基铁基团间存在电荷转移,有效增强Fe-CO之间的共价作用。多数稳定结构Fe（CO）_x（PR₃）_5-x的第一膦配体解离能要比第一羰基解离能低,预示Fe（CO）_5-x（PR₃）_x的反应活性比Fe（CO）₅有明显提高。     

Synthesis and characterization of methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER3)] (SS = S2CNR 2, S2COEt, S2P(OR)2, S2 PPh2; ER3 = PMePh2, PPh3, AsPh3)

Methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER₃] (SS = S₂ CNR₂ (R = Me or Et), S₂COEt, S₂P(OR)₂ (R = Et, ⁿPr, ⁱPr), S₂PPh₂; ER₃ = PMePh₂, PPh₃, AsPh₃) have been synthesized by the reaction of [Pd₂Me₂(μ-Cl)₂(PMePh₂)₂] with sodium/potassium/ammonium salts of the dithio acid or by treatment of [PdMeCl(cod)] with ER₃ followed by sodium/potassium/ammonium salts of the dithio ligand. All the complexes were characterized by elemental analysis, IR and nuclear magnetic resonance (¹H, ³¹P) data.