Synthesis and X-ray structural characterization of the triphenylphosphine derivative of the closo-dodecaborate anion, closo-[B12H11P(C6H5)3][N(n-C4H9)4]

The reaction of a molar excess of closo-[B₁₂H₁₁I][N(n-C₄H₉)₄]₂ (1) with tetrakis(triphenylphosphine)palladium (0), Pd(0)L₄, yields to the formation of the title monoanionic compound, closo-[1-B₁₂H₁₁P(C₆H₅)₃][N(n-C₄H₉)₄] (2). The structure of 2 was determined by X-ray diffraction analysis performed on a single crystal. The mechanism of formation of 2 is also discussed. We suggested a two-step mechanism for the formation of 2 consisting in a oxidative addition of the palladium complex followed by a reductive elimination involving P(C₆H₅)₃ and assisted by Na₂CO₃. To our knowledge, this is the first example of monosubstitution of B₁₂ with formation of boron-phosphorus bond.     

Synthesis and X-ray structural characterisation of the tetramethylene oxonium derivative of the hydrodecaborate anion. A versatile route for derivative chemistry of [B10H10]

The oxonium derivative P(C₆H₅)₄[2-B₁₀H₉O(CH₂)₄] (1) has been prepared from [B₁₀H₁₀]²⁻ by a solvent-addition reaction route, promoted by Et₂O · BF₃. Its structure has been confirmed by single crystal X-ray analysis. 1 is assumed to be a useful synthon for the derivative chemistry of [B₁₀H₁₀]²⁻. As an illustration, ring-opening reaction occurred in presence of the strong nucleophilic agent OH⁻, giving the monoanionic derivative [P(C₆H₅)₄]₂[2-B₁₀H₉O(CH₂)₄OH] (2).     

The synthesis of functional derivatives of the [1-CB9H10] anion by Brellochs reaction

Reactions of decaborane with various aldehydes in alkaline media were studied. The reactions with HCOH and 2-MeOC₆H₄CHO give the corresponding arachno-carboranes [6-R-arachno-CB₉H₁₃]⁻ (R = H, C₆H₄-2-OMe), whereas the reactions with C₆H₅CHO, 4-BrC₆H₄CHO, 4-MeCONHC₆H₄CHO, and 2-SC₄H₃CHO result in the nido-carboranes [6-R-nido-CB₉H₁₁]⁻ (R = C₆H₅, C₆H₄-4-Br, C₆H₄-4-NHCOMe, 2-SC₄H₃). Both the arachno- and nido-carboranes can be easily oxidized with elemental iodine in an alkaline aqueous solution giving the corresponding closo-derivatives [2-R-closo-2-CB₉H₉]⁻. These closo-2-isomers, under heating in solution, undergo rearrangement to more thermodynamically favorable closo-1-isomers [1-R-closo-1-CB₉H₉]⁻. The structure of (Bu₄N)[1-(4-BrC₆H₄)-1-CB₉H₉] was determined using single crystal X-ray diffraction.     

Ethynylmonocarba-closo-dodecaborates: M[12-HCC-closo-1-CB11H11] and M[7,12-(HCC)2-closo-1-CB11H10] (M = Cs, [Et4N])

Cesium and tetraethylammonium salts of the ethynyl functionalized monocarba-closo-dodecaborate anions [12-HCC-closo-1-CB₁₁H₁₁]⁻ and [7,12-(HCC)₂-closo-1-CB₁₁H₁₀]⁻ were obtained by desilylation of [Et₄N][12-Me₃SiCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(Me₃SiCC)₂-closo-1-CB₁₁H₁₀], respectively. Their thermal properties were examined by differential scanning calorimetry. The compounds were characterized by multi-NMR, IR, and Raman spectroscopy, (−)-MALDI mass spectrometry, and elemental analysis. Single-crystals of Cs[12-HCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(HCC)₂-closo-1-CB₁₁H₁₀] were studied by X-ray diffraction. The discussion of the spectroscopic and structural properties is supported by data derived from theoretical calculations using density functional theory as well as perturbation theory.     

Reactions of oxonium derivatives of [B12H12] with amines: Synthesis and structure of novel B12-based ammonium salts and amino acids

The reactions of oxonium derivatives of [B₁₂H₁₂]²⁻ with various amines were studied. A series of novel B₁₂-species with ammonium group on the side chain was synthesized in high yield. A structure of tetrabutylammonium-[2-(2-morpholinium-ethoxy)-ethoxy]-undecahydro-closo-dodecaborate was determined and the existence of intramolecular N-H?O-B bond was shown. Using these reactions, novel boronated piperazines and amino acids were prepared.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Synthesis of a Tyr-octreotate conjugated closo-carborane [HC2B10H10]: a potential compound for boron neutron capture therapy

A novel Tyr³-octreotate conjugated closo-carborane as a potential compound for boron neutron capture therapy was obtained via Fmoc solid phase peptide synthesis. The boron cluster [C₂B₁₀H₁₁] was introduced through the reaction of 6,9-bis(acetonitrile)decaborane and 5-hexynoic acid yielding a new closo-carborane conjugated carboxylic acid which was coupled subsequently with solid phase conjugated Tyr³-octreotate. The final boron-containing peptide was purified by preparative reverse phase HPLC and structural identity was proved applying MALDI-TOF mass spectrometry.     

Crystal structure of [Mn(1,10-C12H8N2)3](B6H7)2

A new compound [MN^II(Phen)₃]²⁺(B₆H₇)₂⁻ is synthesized; its crystal structure is studied by XRD at 100 K. Crystallographic data: C₃₆H₃₈B₁₂N₆Mn, M = 739.39, triclinic symmetry, space group P , unit cell parameters: a = 10.3131(3) ?, b = 13.4839(4) ?, c = 15.1132(4) ?; α = 97.696(1)°, β = 108.324(1)°, γ = 102.211(1)°; V = 1903.9(1) ?³, Z = 2, d _calc = 1.290 g/cm³. The structure is solved by direct and Fourier methods and refined by full-matrix LSM in the anisotropic (isotropic for hydrogen atoms) approximation to the final factor R ₁ = 0.036 for 10169 I _hkl ≥ 2σ _I (Bruker-Nonius X8 APEX CCD diffractometer, λMoK _α). The structure contains two crystallographically different anions. Original Russian Text Copyright ? 2009 by T. M. Polyanskaya, M. K. Drozdova, V. V. Volkov, and K. G. Myakishev __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 2, pp. 381–385, March–April, 2009.     

Reactions of oxonium derivatives of [B12H12] with sulphur nucleophiles. Synthesis of novel B12-based mercaptanes, sulfides and nucleosides

Cleavage of oxonium derivatives of [B₁₂H₁₂]²⁻ by various S-nucleophiles was studied. Reactions of tetrabutylammonium 1-tetramethylene-(3-oxa)-oxonium-closo-undecahydrododecaborate with thiourea and a series of thiols resulted in novel B₁₂-based mercaptane, aliphatic, aromatic and heteroaromatic sulfides with high yields under mild conditions. This approach was also used for the preparation of novel guanosine derivative of [B₁₂H₁₂]²⁻.     

Ionic organoboranes. Part 8: the nature of the face hydrogens of [7.11]-nido-(12)-7,8-dicarbahemiousene (C7H6-B9C2H11) and B11H12

An ab initio molecular orbital study shows that the face hydrogen of the zwitterionic hemiousene [7.11¹]-nido-(12)-7,8-dicarbahemiousene (C₇H₆⁺-B₉C₂H₁₁⁻) is in a fluxional double minimum. It is primarily associated with B10 and forms unsymmetrical three-center bridges between B10-B9 or B10-B11. The transition barrier is about 2.5 kcal mol⁻¹. This structure is similar to that of the unsubstituted C₂B₉H₁₂⁻ ion and demonstrates that the cationic tropyliumyl substituent has little effect on the face. The hypothetical completely symmetrical ion B₁₁H₁₂³⁻ does not have a centered face hydrogen. The hydrogen is involved in a short, symmetrical bridge between face borons, and would be presumably fully fluxional in solution.     

Synthesis and structure of a 1,6-hexyldiamine heptaborate, [H3N(CH2)6NH3][B7O10(OH)3]

A new 1,6-hexyldiamine heptaborate, [H₃N(CH₂)₆NH₃][B₇O₁₀(OH)₃] (1), has been solvothermally synthesized and characterized by single-crystal X-ray diffraction, FTIR, elemental analysis, and thermogravimetric analysis. Compound 1 crystallizes in monoclinic system, space group P2₁/n with a=8.042(2) Å, b=20.004(4) Å, c=10.103(2) Å, and β=90.42(3)°. The anionic [B₇O₁₀(OH)₃]_n²ⁿ⁻ layers are interlinked via hydrogen bonding to form a 3D supramolecular network containing large channels, in which the templated [H₃N(CH₂)₆NH₃]²⁺ cations are located.     

Facile formation of exo-nido→closo-rearrangement products upon the replacement of PPh3 ligands with bis(diphenylphosphino)alkanes in “three-bridge” ruthenacarborane 5,6,10-[RuCl(PPh3)2]-5,6,10-(μ-H)3-10-H-exo-nido-7,8-C2B9H8

The replacement of the PPh₃ ligands in “three-bridge” exo-nido-ruthenacarborane 5,6,10-[RuCl(PPh₃)₂]-5,6,10-(μ-H)₃-10-H-exo-nido-7,8-C₂B₉H₈ with diphosphines, viz., 1,3-bis(diphenylphosphino)propane (dppp) or 1,4-bis(diphenylphosphino)butane (dppb) dramatically decreases the barrier to the thermal exo-nido→closo rearrangement affording the chelate closo-complexes 3,3-[Ph₂P(CH₂)_nPPh₂]-3-H-3-Cl-closo-3,1,2-RuC₂B₉H₁₁ (n = 3 or 4) under mild conditions. In the reaction with dppp, the rearrangement is accompanied by the formation of 17-electron paramagnetic closo-ruthenacarborane 3,3-[Ph₂P(CH₂)₃PPh₂]-3-Cl-closo-3,1,2-RuC₂B₉H₁₁, which could be isolated as the main product when the reaction was carried out at 80 °C. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2455–2459, November, 2005.     

The lanthanoid(III) chloride cyclo-tetrasilicates M6Cl10[Si4O12] (M=Sm, Gd-Dy): Synthesis, structure and IR investigations

The chloride derivatized lanthanoid(III) cyclo-tetrasilicates of the composition M₆Cl₁₀[Si₄O₁₂] (M=Sm, Gd-Dy) crystallize monoclinically in space group C2/m (a=1062-1065, b=1036-1052, c=1163-1187 pm, β≈103°, Z=2). They are obtained by the reaction of the sesquioxides M₂O₃ (or the combination of Tb₄O₇ and Tb in 3:2-molar ratio for the terbium case), the corresponding trichlorides MCl₃, and SiO₂ (silica gel) in stoichiometric ratios with double the amount of MCl₃ as flux in evacuated silica tubes (7d at 850 °C) as transparent, pseudo-octagonal, pillar-shaped single crystals with the colour of the respective lanthanoid trication M³⁺. Their crystal structure can be considered as a layered arrangement in which cationic {[(M2)₅Cl₉]⁶⁺} layers are alternatingly piled with anionic ones of the kind {[(M1)Cl[Si₄O₁₂]]⁶⁻}. In the latter, the (M1)³⁺ cations show a slightly distorted hexagonal bipyramidal environment built up by two Cl⁻ and six O²⁻ anions (CN=8), whereas the (M2)³⁺ cations exhibit a coordination number of only seven (five Cl⁻ and two O²⁻ anions in the shape of a distorted pentagonal bipyramid). The cyclo-tetrasilicate units consist of four corner-linked [SiO₄]⁴⁻ tetrahedra in all-ecliptical conformation each, fused to eight-membered rings, which contain two almost linear (178°) and two bent (142°) Si-O-Si bridges. This particular cyclo-[Si₄O₁₂]⁸⁻ situation could be confirmed by theoretical and experimental infrared-spectroscopic investigations.     

Novel bicyclic hexanuclear copper(I) aggregate: Structure and solid state P CPMAS NMR spectra of [(Cu3L3)2] and [Cu(PPh3)2L] complexes of N-(diisopropoxythiophosphinyl)-N′-phenylthiourea (HL)

A new complex of N-thiophosphorylthiourea PhNHC(S)NHP(S)(OiPr)₂ (HL) of formula [(Cu₃L₃)₂] has been synthesized and characterized by single crystal X-ray diffraction, FT-IR, ¹H, ³¹P NMR in solution and by ³¹P CPMAS NMR spectroscopy in the solid state. A comparison of the structure and the spectral parameters of [(Cu₃L₃)₂] with those of the mononuclear analogue [Cu(PPh₃)₂L] was performed. In the solid state the aggregate [(Cu₃L₃)₂] represents the first example of a spontaneous “side-by-side” association of two neutral cyclic [Cu₃L₃] moieties using two Cu-S-Cu bridges formed by the sulfur atoms of the PS-groups. The values of the ¹J(³¹P-^63,65Cu) and ²J(³¹P-³¹P) coupling constants of the [Cu(PPh₃)₂]⁺ moiety in the solid state spectra are reported.     

The new silver(I)thioantimonate(III) [C4N2H14][Ag3Sb3S7] and a new structural variant of the silver(I)thioantimonate(III) [C2N2H9]2[Ag5Sb3S8] both synthesized under solvothermal conditions

The novel silver(I)thioantimonates(III) [C₄N₂H₁₄][Ag₃Sb₃S₇] (I) (C₄N₂H₁₂=1,4-diaminobutane) and [C₂N₂H₉]₂[Ag₅Sb₃S₈] (II) (C₂N₂H₈=ethylenediamine) were synthesized under solvothermal conditions using AgNO₃, Sb, S and the amines as structure directing molecules. Both compounds crystallize as orange needles with lattice parameters a=6.669(1) Å, b=30.440(3) Å, c=9.154(1) Å for I (space group Pnma), and a=6.2712(4) Å, b=15.901(1) Å, c=23.012(2) Å, β=95.37(1)° for II (space group P2₁/n). In both compounds the primary building units are trigonal SbS₃ pyramids, AgS₃ triangles and AgS₄ tetrahedra. In I the layered [Ag₃Sb₃S₇]²⁻ anion is constructed by two different chains. An [Sb₂S₄] chain running along [100] is formed by vertex sharing of SbS₃ pyramids. The second chain contains a Ag₃SbS₅ group composed of the AgS₄ tetrahedron, two AgS₃ units and one SbS₃ pyramid. The Ag₃SbS₅ units are joined via S atoms to form the second chain which is also directed along [100]. The layered anion is then obtained by condensation of the two individual chains. The organic structure director is sandwiched by the inorganic layers and the shortest inter-layer distance is about 6.4 Å. In II the primary building units are linked into different six-membered rings which form a honeycomb-like layer. Two such layers are connected via Ag-S bonds of the AgS₄ tetrahedra giving the final undulated double layer anion. The structure directing ethylenediamine cations are located in pairs between the layers and a sandwich-like arrangement of alternating anionic layers and organic cations is observed. The inter-layer separation is about 5.4 Å. Both compounds decompose in a more or less complex manner when heated in an argon atmosphere. The optical band gaps of about 1.9 eV for the two compounds proof the semiconducting behavior. For II the conductivity was measured with impedance spectroscopy and amounts to σ_295K=7.6×10⁻⁷ Ω⁻¹ cm⁻¹. At 80 °C the conductivity is significantly larger by one order of magnitude.     

Polyhedral monocarbaborane chemistry : Reactions of the [6-Ph-nido-6-CB9H11] anion with two-electron donors to yield a series of neutral arachno and closo ten-vertex monocarbaborane derivatives

Reaction of the ten-vertex [6-Ph-nido-6-CB₉H₁₁]⁻ anion (1) with two-electron donor ligands L, where L is SMe₂, NH₂Ph, NC₅H₅, NC₅H₄-para-CH₂Ph, NC₅H₄-para-Ph or NC₉H₇ (where NC₉H₇ is quinoline) in the presence of {FeCl₃(OH₂)₆} gives the six neutral arachno ten-vertex monocarbaboranes [6-Ph-9-L-arachno-6-CB₉H₁₂], compounds 2, 3, 4, 7, 9 and 11, respectively, isolatable in yields of up to 63%. On prolonged treatment with {FeCl₃(OH₂)₆} oxidative cluster closure of the four compounds 4, 7, 9 and 11 that have pyridine-type ligands gives the neutral closo ten-vertex monocarbaboranes [1-Ph-6-L-closo-1-CB₉H₈], compounds 6, 8, 10 and 12, respectively, in yields of 49-92%. All new species 2, 3, 4, 6, 7, 8, 9, 10, 11 and 12 are characterised by single-crystal X-ray diffraction analysis and NMR spectroscopy. [This paper is an annotated exposition of parts of an oral presentation at the Third Pan-European Meeting of Boron Chemists, EUROBORON-3, Pruhonice, The Czech Republic, September 2004, of which the proceedings constitute this volume of Journal of Organometallic Chemistry.]     

Synthesis and crystal structure of gallosilicate- and aluminogermanate tetrahydroborate sodalites Na8[GaSiO4]6(BH4)2 and Na8[AlGeO4]6(BH4)2

Tetrahydroborate enclathrated sodalites with gallosilicate and aluminogermanate host framework were synthesized under mild hydrothermal conditions and characterized by X-ray powder diffraction and IR spectroscopy. Crystal structures were refined in the space group P-43n from X-ray powder data using the Rietveld method. Na₈[GaSiO₄]₆(BH₄)₂: a=895.90(1) pm, V=0.71909(3)×10⁻⁶ nm³, R_P=0.074, R_B=0.022, Na₈[AlGeO₄]₆(BH₄)₂: a=905.89(2) pm, V=0.74340(6)×10⁻⁶ nm³, R_P=0.082, R_B=0.026. The tetrahedral framework T-atoms are completely ordered in each case and the boron atoms are located at the centre of the sodalite cages. The hydrogen atoms of the enclathrated anions were refined on x, x, x positions, restraining them to boron-hydrogen distances of 116.8 pm as found in NaBD₄.The IR-absorption spectra of the novel phases show the typical bands of the tetrahedral group as found in the spectrum of pure sodium boron hydride.The new sodalites are discussed as interesting -containing model compounds which could release pure hydrogen.     

Theoretical study of tricyclo[3,3,1,1]decane, tricyclo[3,3,1,1]decsilane molecules and their halogen derivatives, C10H12X4 and Si10H12X4 (X=F, Cl, Br, I)

The B3LYP/3-21G* ab initio molecular orbital method from the program package was applied to study tricyclo[3,3,1,1^3,7]decane and tricyclo[3,3,1,1^3,7]decsilane molecules and their halogen derivatives (1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decane and 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decsilane, C₁₀H₁₂X₄ and Si₁₀H₁₂X₄ respectively). The optimized structures of these compounds were obtained. Ionization potentials, HOMO and LUMO energies, energy gaps, heats of formation, atomization energies and vibration frequencies were calculated. The calculations indicate that these molecules are stable and have T_d symmetry. Tricyclo[3,3,1,1^3,7]decsilane and its halogen derivatives (Si₁₀H₁₂X₄) are found to have higher conductivity than tricyclo[3,3,1,1^3,7]decane and its halogen derivatives (C₁₀H₁₂X₄). 1,3,5,7-Tetrafluorotricyclo[3,3,1,1^3,7]decane (C₁₀H₁₂F₄) and 1,3,5,7-tetrafluorotricyclo[3,3,1,1^3,7]decsilane (Si₁₀H₁₂F₄) were found to be the easiest compounds to form and the most difficult to dissociate of all 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decane and 1,3,5,7-tetrahalotricyclo[3,3,1,1^3,7]decsilane compounds, respectively.     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.     

Chiral “P-N-P” ligands, (C20H12O2)PN(R)PY2 [R = CHMe2, Y = C6H5, OC6H5, OC6H4-4-Me, OC6H4-4-OMe or OC6H4-4-Bu] and their allyl palladium complexes

Chiral “P-N-P” ligands, (C₂₀H₁₂O₂)PN(R)PY₂ [R = CHMe₂, Y = C₆H₅ (1), OC₆H₅ (2), OC₆H₄-4-Me (3), OC₆H₄-4-OMe (4) or OC₆H₄-4-^tBu (5)] bearing the axially chiral 1,1′-binaphthyl-2,2′-dioxy moiety have been synthesised. Palladium allyl chemistry of two of these chiral ligands (1 and 2) has been investigated. The structures of isomeric η³-allyl palladium complexes, (R′ = Me or Ph; Y = C₆H₅ or OC₆H₅) have been elucidated by high field two-dimensional NMR spectroscopy. The solid state structure of [Pd(η³-1,3-Ph₂-C₃H₃){κ²-(racemic)-(C₂₀H₁₂O₂)PN(CHMe₂)PPh₂}](PF₆) has been determined by X-ray crystallography. Preliminary investigations show that the diphosphazanes, 1 and 2 function as efficient auxiliary ligands for catalytic allylic alkylation but give rise to only moderate levels of enantiomeric excess.