Facile synthesis and X-ray structures of (η-C5Me5)Ti(OAr)3 (OAr = OC6F5, OCH2C6F5, and OCH2C6F2H3)

New half-sandwich titanocene complexes (η⁵-C₅Me₅)Ti(OC₆F₅)₃ (1), (η⁵-C₅Me₅)Ti(OCH₂C₆F₅)₃ (2), and (η⁵-C₅Me₅)Ti(OCH₂C₆F₂H₃)₃ (3) were synthesized via the displacement of methoxide ligands in (η⁵-C₅Me₅)Ti(OMe)₃ by the corresponding aryloxy or benzyloxy ligands. These compounds have been fully characterized by various spectroscopic methods including X-ray crystallography. Compound 1 has a distorted three-legged piano stool structure. However, complexes 2 and 3 have the chariot-like structure, where chariot means a two-wheeled horse-drawn vehicle. The π electron donation of oxygen atom to Ti center in complexes 1-3 is considerable.     

Protonation of the lithio derivatives of the 1,2,4-tri-phosphaferrocenes, [LiFe(η-P2C2Bu2PBu)(η-C5R5)] (R = H, Me): Crystal and molecular structure of [Fe(η-P3C2Bu2BuH)(η-C5Me5)]

A new synthetic route is described to generate the 4-centre-5 electron donor ring system (P₃C₂^tBu₂BuH), via protonation of the lithium salts [LiFe(η⁴-P₂C₂^tBu₂PBu)(η⁵-C₅R₅)] (R = H, Me). The molecular structure of [Fe(η⁴-P₃C₂^tBu₂BuH)(η⁵-C₅R₅)] (R = Me) has been determined by a single crystal X-ray study.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Germylene and stannylene (Me2NCH2CH2O)2E as strong σ-donor ligands for transition metal complexes [ML(CO)n] (E = Ge, Sn; M = Cr, Mo, W, n = 4 or 5; M = Fe, n = 4). Synthesis, spectroscopic and theoretical study

A series of germylene and stannylene (Me₂NCH₂CH₂O)₂E (E = Ge, 1; E = Sn, 2) complexes of group 6 metals and iron carbonyls L·M(CO)_n (M = Cr, Mo, W, n = 5 (3-8), n = 4 (9, 10); M = Fe, n = 4 (11, 12)) were prepared. These complexes were characterized by ¹H, ¹³C NMR, FTIR and elemental analysis. Ligand properties of 1 and 2 were compared to PPh₃ and dmiy (N,N′-dimethylimidazolin-2-ylidene) using theoretical calculations (PBE/TZ2P) and FTIR. Ligand dissociation energies increase in the order Ph₃P < 2∼1 < dmiy, while donor strength rise in the order PPh₃ < dmiy < 2 < 1.     

Insertion reaction of elemental sulfur into the Ln–C bond: Synthesis and characterization of [(C5H4SiMe2Bu)2Ln(μ-SR)]2 (R = Me,Ln = Yb,Er, Dy,Y; R = Bu,Ln = Yb,Dy)

Treatment of (C₅H₄SiMe₂^tBu)₂LnR with 1 equiv of elemental sulfur in toluene at ambient temperature gives dimeric complexes [(C₅H₄SiMe₂^tBu)₂Ln(μ-SR)]₂ [R = Me, Ln = Yb (1), Er (2), Dy (3), Y (4); R = ⁿBu, Ln = Yb (5), Dy (6)]. All these complexes have been characterized by elemental analysis, IR and mass spectroscopies. The structures of complexes 1, 3, 5 and 6 are also determined through X-ray single crystal diffraction analysis, indicating that only one sulfur atom from elemental sulfur inserts into Ln–C σ-bond.     

A laser flash photolysis, matrix isolation, and DFT investigation of (η-C6H5Y)Cr(CO)3 (Y = NH2, OCH3, H, CHO, or CO2CH3)

The quantum yield for arene displacement from (η⁶-C₆H₅Y)Cr(CO)₃ was measured in 1,1,2-trifluorotrichloroethane (Y = NH₂, OCH₃, H, CHO, or CO₂CH₃). Values of 0.24, 0.27, 0.15, 0.17, and 0.32 were obtained respectively (λ_exc. = 355 nm). These values are significantly higher than those measured for photoinduced arene loss in hydrocarbon solvents using the same excitation wavelength. Laser flash photolysis of (η⁶-C₆H₅Y)Cr(CO)₃ in 1,1,2-trifluorotrichloroethane (λ_exc. = 355 nm) resulted in the rapid formation (<10 ns) of Cr(CO)₆. Matrix isolation experiments on (η⁶-C₆H₅Y)Cr(CO)₃ (Y = H or CHO) at 12 K in CH₄ or CO-doped CH₄ matrixes using monochromatic irradiation confirmed the presence of two discrete excited states, one leading to CO-loss and the other to arene-loss. The results correlate with the calculated electron drift in the excited state derived from density functional theory and time dependent density functional theory calculations.     

NaCl与Hg0对V2O5-WO3/TiO2SCR脱硝催化剂的协同作用研究

制备了纳米级V₂O₅-WO₃/TiO₂脱硝催化剂,采用浸渍法模拟催化剂NaCl中毒,吸附法模拟单质汞Hg⁰作用于催化剂,运用X射线衍射分析(XRD)、扫描电镜(SEM)、比表面积分析(BET)、NH₃程序升温脱附(NH₃-TPD)、傅里叶变换红外光谱分析(FT-IR)等技术表征分析了NaCl和Hg⁰对催化剂性能的影响。同时,结合已有的研究分析,提出两者对催化剂的作用机理。实验结果表明,NaCl的添加会造成催化剂表面团聚黏结,催化剂比表面积减小,且NaCl负载量越大,对催化剂毒害作用越大。Na会中和催化剂的Brønsted酸性位(V-OH),最终形成-V-O-Na及Cl-V-O-Na,造成催化剂失活。Hg⁰对催化剂的表面形貌及物相组成没有影响,并主要通过吸附在催化剂的V活性位上使其脱硝性能有所减弱。当NaCl和Hg⁰同时存在时,吸附的Hg会与NaCl中引入的Cl结合,形成HgCl、HgCl₂,并部分取代-Na,最终形成-V-O…Hg及-V-O-Hg-Cl。     

Syntheses, structures, and dynamic properties of M(CO)2(η-C3H5)(en)(X) (M = Mo, W; X = Br, N3, CN) and [(en)(η-C3H5)(CO)2M(μ-CN)M(CO)2(η-C3H5)(en)]Br (M = Mo, W)

Mononuclear compounds M(CO)₂(η³-C₃H₅)(en)(X) (X = Br, M = Mo(1), W(2); X = N₃, M = Mo(3), W(4); X = CN, M = Mo(5), W(6)) and cyanide-bridged bimetallic compounds [(en)(η³-C₃H₅)(CO)₂M(μ-CN)M(CO)₂(η³-C₃H₅)(en)]Br (M = Mo (7), W(8)) were prepared and characterized. These compounds are fluxional and display broad unresolved proton NMR signals at room temperature. Compounds 1-6 were characterized by NMR spectroscopy at −60 °C, which revealed isomers in solution. The major isomers of 1-4 adopt an asymmetric endo-conformation, while those of 5 and 6 were both found to possess a symmetric endo-conformation. The single crystal X-ray structures of 1-6 are consistent with the structures of the major isomer in solution at low temperature. In contrast to mononuclear terminal cyanide compounds 5 and 6, cyanide-bridged compounds 7 and 8 were found to adopt the asymmetric endo-conformation in the solid state.     

Solid–liquid metastable equilibria in the quaternary system Li2SO4 + MgSO4 + Na2SO4 + H2O at T = 263.15 K

Solubility in the liquid–solid metastable system Li₂SO₄ + MgSO₄ + Na₂SO₄ + H₂O at T = 263.15 K was studied using the isothermal evaporation method. Based on experimental data, dry-salt phase and water-phase diagrams of the system were plotted. The dry-salt phase diagram of the system includes one three-salt co-saturation point, three metastable solubility isotherm curves, and three crystallization regions corresponding to lithium sulphate monohydrate (Li₂SO₄·H₂O), epsomite (MgSO₄·7H₂O), and mirabilite (Na₂SO₄·10H₂O). Neither a solid solution nor double salts were found. Based on the extended Harvie–Weare (HW) model and its temperature-dependent equation, the values of the Pitzer parameters β⁽⁰⁾, β⁽¹⁾, β⁽²⁾, and C^Φ for Li₂SO₄, MgSO₄, and Na₂SO₄, the mixed ion-interaction parameters θ_Li,Na, θ_Li,Mg, θ_Na,Mg, ΨLi,Na,SO₄${\Psi }_{\text{Li,Na,S}{\text{O}}_4}$, ΨLi,Mg,SO₄${\Psi }_{\text{Li,Mg,S}{\text{O}}_4}$, and ΨNa,Mg,SO₄${\Psi }_{\text{Na,Mg,S}{\text{O}}_4}$, and the Debye–Hückel parameter A^Φ in the quaternary system at 263.15 K were obtained. The solubility of the quaternary system Li₂SO₄ + MgSO₄ + Na₂SO₄ + H₂O at T = 263.15 K was also calculated. A comparison between the calculated and experimental results shows that the predicted solubility agrees well with experimental data.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Zur r?ntgenfluorescenzanalytischen Bestimmung von Ta2O5, Nb2O5 und MnO in Tantalit

Ohne Zusammenfassung     

新型层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5] 的合成、表征及其共模板作用

在溶剂热体系中,以N,N-二乙基乙二胺为结构导向剂,合成了Al/P为3/4的层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5]单晶,并通过X射线单晶衍射结构分析.XRD,ICP,元素分析,差热-热重分析等手段进行了表征.该化合物属单斜晶系,P2(1)/c空间群,晶胞参数:a=0.90945(2)nm,b=1.46424(4)nm,c=1.87572(5)nm,β=102.672(2)°,Z=4.其阴离子层由AlO4四面体和PO3(=O)四面体单元交替连接构成,形成四、六、八元环拓扑结构,无机层以ABAB方式堆积,两种质子化的有机胺分子N,N-二乙基乙二胺及其重排产物N,N′-二乙基乙二胺填充在层间.用分子动力学模拟方法,考察了标题化合物中有机胺与无机层间的相互作用,讨论了这两种有机胺的共模板作用.     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

Synthesis and structure of the monometallic cationic complex [Cp(CO)2Fe{η-(CH2CHCH2CH3)}]PF6 (Cp = η-C5H5)

The bimetallic carbocation complex [{Cp(CO)₂Fe}₂(μ-C₄H₇)]PF₆ reacted with trifluoroacetic acid to give the mononuclear cationic complex [Cp(CO)₂Fe{η²-(CH₂CHCH₂CH₃)}]PF₆, which formed yellow orthorhombic crystals in the space group P2₁2₁2₁ with a = 7.652(4), b = 13.422(7), c = 14.037(7); α = β = γ = 90.00 and Z = 4. The carbocation is coordinated to the metal in a η²-fashion forming a chiral metallacyclopropane type structure. The β-CH carbon (C9) is disordered over two positions (C9A and C9B), each having about 50% occupancy. This is attributed to there being both the R and S enantioface isomers in equal amounts in the crystal sample. NMR data indicate that the metallacyclopropane structure observed in the solid state is preserved in solution.     

[M(dipicH2)(H2O)3], M = Ni,Cu, Zn (dipicH2 = dipicolinic acid) – A combined crystallographic,spectroscopic and computational study

Cationic metal complexes of dipicolinic acid (dipicH₂) are stabilized by [Ce(dipic)₃]²⁻ ions in the three isomorphous crystals [M(dipicH₂)(OH₂)₃][Ce(dipic)₃] · 3H₂O (M = Ni, 1; Cu, 2; Zn, 3). Magnetic dilution provided by the bulky anions leads to well-resolved EPR spectra in polycrystalline samples of 2. The cations have 4+2 coordination, the carbonyl atom of the carboxylic acid groups coordinating weakly from trans positions. In the case of 2 this steric distortion is augmented by Jahn–Teller distortion. All the three structures are satisfactorily modelled by calculations based on density functional theory (DFT). The switch of the Jahn–Teller axis upon deprotonation of the complex, leading to the neutral species Cu(dipic)(H₂O)₃, is also reproduced by DFT. Electronic transition energies as well as the g-tensor component of the d⁹ complex obtained are in good agreement with experiment. However, the calculated hyperfine coupling constants are in error. DFT also fails to satisfactorily account for the electronic transition in the d⁸ ion in 1.     

UO22＋•nH2O和PuO22＋•nH2O (n＝2, 4, 5, 6)密度泛函理论研究

首先用密度泛函理论(DFT)方法研究了铀酰和钚酰离子的几何与电子结构, 计算结果与实验基本符合, 表明DFT方法也能用于含铀和钚重原子的化合物计算. 然后对铀酰和钚酰水合离子的几何构型、Mulliken集居数分布以及铀酰(钚酰)与配体水分子的结合能进行计算, 计算结果表明UO₂^2＋•5H₂O和PuO₂^2＋•5H₂O分别为铀酰和钚酰系列水合离子中最稳定的配合物.     

MgO-B2O3-28%MgCl2-H2O体系0℃热力学非平衡态相图

采用结晶动力学方法对MgO-B₂O₃-28%MgCl₂-H₂O体系0℃时过饱和溶液的结晶过程进行了研究，结晶析出固相通过化学分析确定了组成，并用X-射线粉末衍射和红外光谱等对其进行了表征。给出了该体系0℃时的热力学非平衡态相图。该相图有4个相区，分别与H₃BO₃、MgO·3B₂O₃·7.5H₂O、2MgO·2B₂O₃·MgCl₂·14H₂O和3Mg(OH)₂·MgCl₂·8H₂O相对应。     

Ge2Sb2Te5的化学机械抛光研究进展

相变存储器由于具有非易失性、高速度、低功耗等优点被认为最有可能成为下一代存储器的主流产品,Ge2Sb2Te5(GST)作为一种传统相变材料已经被广泛应用在相变存储器中,而GST的化学机械抛光作为相变存储器生产的关键工艺目前已被采用.本工作综述了有关GST的化学机械抛光技术研究进展,讨论了GST化学机械抛光过程的影响因素,如下压力、转速、抛光垫、磨料、氧化剂、表面活性剂等,并对目前GST的化学机械抛光机理进行了归纳,进一步展望了GST的化学机械抛光技术的发展前景.