Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots

The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen‐bonded homopolymers from a family of poly[4‐(n‐acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol‐containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical properties of embedded QDs, which offer new possibilities for photonic applications of QD–LC polymer nanocomposites.     

Luminescent properties of water-soluble denatured bovine serum albumin-coated CdTe quantum dots

Chemically reduced bovine serum albumin (BSA) has been used to modify the surface of water-soluble CdTe quantum dots (QDs). It is demonstrated that the denatured BSA (dBSA) can be conjugated to the surface of CdTe QDs and thereby efficiently improve the chemical stability and the photoluminescence quantum yield (PL QY) of the QDs. It is inferred that a shell-like complex structure CdTe(x)(dBSA)(1-x) will form on the surface of the CdTe "core", resulting in the enhancement of PL intensity and the blue shift of the PL peak. This study of the effects of pH and dBSA concentration on optical properties of dBSA-coated QDs suggests that, at pH 6-9, the solution of dBSA-coated CdTe QDs can keep substantial stability and fluorescent brightness, whereas further increase of pH value leads to a dramatic decrease in PL QY and chemical stability. On the other hand, too high or too low initial dBSA concentration in the QD solution results in a decrease of PL QY for dBSA-coated CdTe QDs. This study provides a new approach of preparing stable water-soluble QDs with high PL QY and controllable luminescent colors for biological labeling applications.     

Polymer/carbon-based quantum dot nanocomposite: forthcoming materials for technical application

This endeavor presents state-of-the-art overview on polymer/carbon-based quantum dot nanocomposite. Carbon-based quantum dot (graphene quantum dot, carbon nanodot, and polymer dot) are ～10nm. Carbon-based quantum dot own exciting features such as tunable optoelectronic and photoluminescence properties, high stability, chemical inertness, low cytotoxicity, and biocompatibility owing to quantum confinement and edge effects. Main emphasis of article was to see the combined effect of polymer and carbon-based quantum dot in nanocomposite. Five major categories have been reviewed in this article including conjugated polymer/carbon-based quantum dot nanocomposite, epoxy/carbon-based quantum dot nanocomposite, polystyrene/carbon-based quantum dot nanocomposite, poly(dimethyl siloxane)/carbon-based quantum dot nanocomposite, and block copolymer/carbon-based quantum dot nanocomposite. The review also refers to cutting edge application areas of polymer/carbon-based quantum dot nanocomposite. Conducting polymer/carbon quantum dot nanocomposite has been integrated in energy storage devices, detectors, and electronic devices. These materials are also promising candidates for bulk heterojunction solar cells and light-emitting diodes. Another important use is the identification and removal of toxic metals. Functional materials have also been used for fluorescence imaging of live cells. Modification of carbon-based quantum dot and incorporation in appropriate polymer matrices can be adopted as powerful future tool enabling desired tailored applicability of nanocomposite in advance high performance technical applications.     

Facile synthesis of fluorescent quantum dot‐polymer nanocomposites via frontal polymerization

We report an available approach for quickly fabricating CdS QD‐polymer nanocomposites via frontal polymerization (FP). First, we synthesized (3‐mercaptopropyl)‐1‐trimethoxysilane (MPS)‐capped CdS quantum dots (QDs). With these MPS‐capped CdS QDs containing mercapto groups, MPS‐capped CdS QDs can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP. A variety of features for preparing QD‐polymer nanocomposites, such as initiator concentration and CdS concentration, were thoroughly investigated. The fluorescence properties of QD‐polymer nanocomposites prepared via FP are comparatively investigated on the basis of ultraviolet–visible (UV–vis) spectra and photoluminescence (PL) spectra. Results show that the PL intensity of QD‐polymer nanocomposites prepared via the FP method is superior to that obtained by the traditional batch polymerization (BP) method. In addition, by measuring the changes of PL intensity of the samples immersed in different concentrations of copper acetate solution, we found the QD‐polymer nanocomposites can be ultrasensitive to copper ions. This FP process can be exploited as a facile and rapid way for synthesis QD‐polymer nanocomposites on a large scale, avoiding the fluorescence quenching of nanocrystals during incorporation nanocrystals into polymer matrices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2170–2177, 2010     

Tetra-benzothiadiazole-based [12]Cycloparaphenylene with Bright Emission and Its Supramolecular Assembly

The radial conjugated π-system of cycloparaphenylenes (CPPs) makes them intriguing fluorophores and unique supramolecular hosts. However, the bright photoluminescence (PL) of CPPs was limited to the blue light and the supramolecular assembly behavior of large CPPs was rarely investigated. Here we present the synthesis of tetra-benzothiadiazole-based [12]cycloparaphenylene (TB[12]CPP), which exhibits a lime to orange PL with an excellent quantum yield up to 82 % in solution. The PL quantum yield of TB[12]CPP can be further improved to 98 % in polymer matrix. Benefiting from its enlarged size, TB[12]CPP can accommodate a fullerene derivative or concave–convex complexes of fullerene and buckybowl through the combined π–π and C−H⋅⋅⋅π interactions. The latter demonstrates the first case of a ternary supramolecule of CPPs.     

Characterization and Polymerization of Thienylphenyl and Selenylphenyl Amines and Their Interaction with CdSe Quantum Dots

Hybrid quantum‐dot‐sensitized solar cells show promising novel optoelectronic properties. An adequate design of such cells requires a deep understanding of the characteristics of each component, including their interactions. In this context, the electrochemical properties of two different hole‐transporting materials (HTMs) and their chemical interactions with trioctylphosphine‐capped CdSe quantum dots are investigated to evaluate their potential use in hybrid quantum‐dot‐sensitized solar cells. Tris[4‐(thien‐2‐yl)phenyl]amine (TTPA) and tris[4‐(selen‐2‐yl)phenyl]amine (TSePA) are studied in the solid state as thin films deposited on a conducting substrate. Spectroelectrochemical studies evidence both solid‐state electropolymerization and doping. Upon addition of TSePA or partially polymerized TTPA to a colloidal solution of trioctylphosphine‐capped CdSe quantum dots, the steady‐state photoluminescence is quenched. This suggests that the quantum dots and the HTM strongly interact, probably through an excited‐state charge‐transfer mechanism. The combination of all these pieces of information indicates that polymerized TTPA and TSePA are potential candidates as HTMs for hybrid quantum‐dot‐sensitized solar cells.     

Molecularly imprinted polymeric film on semiconductor nanoparticles analyte detection by quantum dot photoluminescence

Incorporation of semiconductor nanoparticles into molecularly imprinted polymer provides a sensor material which can be easily shaped and with better selectivity because the bound template would quench the photoluminescence (PL) emission of quantum dots significantly. In this work, artificial receptors of various templates were synthesized with functional monomers such as methacrylic acid (MAA), semiconductor like CdSe/ZnS core-shell derivatized with 4-vinylpyridine and ethylene glycol dimethacrylic acid as the cross-linker. The quenching of photoluminescence emissions is presumably due to the fluorescence resonance energy transfer between quantum dots and template molecules. The photoluminescence emission is unaffected upon incubation of analyte with the blank control polymer.     

Controllable synthesis of novel sandwiched polyaniline/ZnO/polyaniline free‐standing nanocomposite films

Controllable synthesis of novel sandwiched polyaniline (PANI)/ZnO/PANI free‐standing nanocomposite films is reported via spin coating of ZnO quantum‐dot interlayer on PANI base layer and then PANI surface layer on the ZnO interlayer. The thickness of the ZnO interlayer and the PANI surface layer can be easily controlled by adjusting spin time and spin speed, respectively. The effects of the ZnO interlayer thickness and the PANI surface layer thickness are examined in detail on the photoluminescence (PL) property. It is worth noting that coverage of the PANI surface layer on the ZnO interlayer can not only lead to great enhancement in the PL property but also to a maximum PL intensity at a medium PANI surface layer thickness. This maximum PL property is caused by the combined ZnO/PANI carrier transportation and PANI shielding effects. In addition, the nanocomposite films show reasonably good conductivity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oligomeric ligands for luminescent and stable nanocrystal quantum dots

We report a new family of oligomeric alkyl phosphine ligands for nanocrystal quantum dots. These oligomeric phosphines show effective binding affinity to quantum dot surfaces. They form thin and secure organic shells that stabilize quantum dots in diverse environments including serum and polymer matrices. They maintain the initial as-grown photoluminescence quantum yield of the quantum dots and enable homogeneous incorporation into various matrices. They present a chemically flexible structure that can be used for further chemistry, such as cross-linking, copolymerization, and conjugation to biomolecules.     

Quenching of photoluminescence in conjugates of quantum dots and single-walled carbon nanotube

Development of quantum dot (QD) based device components requires controlled integration of QDs into different photonic and electronic materials. In this regard, introduction of methods for regular arrangement of QDs and investigation of properties of QD-based assemblies are important. In the current work we report (1) controlled conjugation of CdSe-ZnS QDs to sidewall-functionalized single-walled carbon nanotube (SWCNT) templates (2) and the effect of conjugation of QDs to SWCNT on the photoluminescence (PL) properties of QDs. We identified that PL intensity and lifetime of QDs are considerably reduced after conjugation to SWCNT. The origin of the quenching of the PL intensity and lifetime was discussed in terms of F?rster resonance energy transfer (FRET). FRET involves nonradiative transfer of energy from a photoexcited QD (energy donor) to a nearby SWCNT (energy acceptor) in the ground state. This was examined by varying the density of QDs on SWCNT and conjugating smaller and bigger QDs to the same SWCNT. We estimated the FRET efficiency in QD-SWCNT conjugates from the quenching of the PL intensity and lifetime and identified that FRET is independent of the density and type of QDs on SWCNT but inherent to QD-SWCNT conjugates.     

Switchable photoluminescence of CdTe nanocrystals by temperature-responsive microgels

In the present study, we report a method for preparing a fluorescent thermosensitive hybrid material based on monodisperse, thermosensitive poly( N-isopropyl acrylamide) (PNIPAM) microgels covered with CdTe nanocrystals of 3.2 nm diameter. The CdTe nanocrystals were covalently immobilized on the surface of PNIPAM microgels. The chemical environment around the CdTe nanocrystals was modified by changing the temperature and inducing the microgel volume-phase transition. This change provoked a steep variation in the nanocrystal photoluminescence (PL) intensity in such a way that when the temperature was under the low critical solution temperature (LCST) of the polymer (36 degrees C) the PL of the nanocrystals was strongly quenched, whereas above the LCST the PL intensity was restored.     

具有聚集诱导发光效应的咔唑基三苯乙烯衍生物单体及聚合物

合成了一类新的咔唑基三苯乙烯衍生物单体及其聚合物.利用示差扫描量热法(DSC)、热重分析法(TGA)、紫外可见分光光度法和荧光分光光度法等对单体和聚合物的性能进行了初步的表征.实验结果表明,该单体和聚合物具有较高的玻璃化转变温度(Tg),分别为210℃和229℃;单体和聚合物均具有很高的热稳定性,热失重5%的温度分别为466℃和467℃;单体具有明显的聚集诱导发光性能(AIE),而聚合物则具有聚集诱导增强发光性能(AIEE);所合成的单体和聚合物有望在OLED器件以及化学传感器上得到应用.     

Quantum dots tailored with poly(para-phenylene vinylene)

In polymernanoparticle composites, uniform dispersion of the nanoparticles carries advantages over cases where nanoparticle aggregation dominates. Such dispersion has been particularly difficult to obtain in the case of composites prepared from nanoparticles and conjugated polymers. Here, we show that cadmium selenide nanocrystals, or quantum dots, can be integrated into thin films of poly(para-phenylene vinylene) (PPV) without aggregation. The two key departures from previous studies of quantum-dot/electronic polymer composites are (1) the synthesis of high-quality quantum dots directly in novel, functional ligands, thus eliminating the need for ligand exchange, and (2) polymerization chemistry that grafts PPV to the quantum dot surface. Solid-state photoluminescence spectra of composite materials prepared by these novel techniques reveal the critical importance of the quantum dot-polymer interface that will enable new investigations in nanoparticle-based light-emitting devices.     

Blue Light Emitting Defective Nanocrystals Composed of Earth‐Abundant Elements

Copper‐based ternary (I–III–VI) chalcogenide nanocrystals (NCs) are compositionally‐flexible semiconductors that do not contain lead (Pb) or cadmium (Cd). Cu‐In‐S NCs are the dominantly studied member of this important materials class and have been reported to contain optically‐active defect states. However, there are minimal reports of In‐free compositions that exhibit efficient photoluminescence (PL). Here, we report a novel solution‐phase synthesis of ≈4 nm defective nanocrystals (DNCs) composed of copper, aluminum, zinc, and sulfur with ≈20 % quantum yield and an attractive PL maximum of 450 nm. Extensive spectroscopic characterization suggests the presence of highly localized electronic states resulting in reasonably fast PL decays (≈1 ns), large vibrational energy spacing, small Stokes shift, and temperature‐independent PL linewidth and PL lifetime (between room temperature and ≈5 K). Furthermore, density functional theory (DFT) calculations suggest PL transitions arise from defects within a CuAl₅S₈ crystal lattice, which supports the experimental observation of highly‐localized states. The results reported here provide a new material with unique optoelectronic characteristics that is an important analog to well‐explored Cu‐In‐S NCs.     

Integrating Photoluminescence and Ferromagnetism in Carbon Quantum Dot/ZnO by Interfacial Orbital Hybridization for Multifunctional Bioprobes

Integrating ferromagnetism (FM) and photoluminescence (PL) into one particular nanostructure as biological probe plays an irreplaceable role in accurate clinical diagnosis combining magnetic resonance and photoluminescence imaging technology. However, magnetic emergence generally needs a spin polarization at Fermi level to display a half-metallic electronic feature, which is not beneficial for preserving radiation recombination ability of photo-excited electron-hole carriers. To overcome this intrinsic difficulty, we propose a feasible atomic-hybridization strategy to anchor carbon quantum dots (CQDs) onto ZnO microsphere surface via breakage of C=O bonds at CQDs and subsequent Zn-3d and C-2p orbital hybridization, which not only ensures the carrier recombination but also leads to a room-temperature magnetism. Herein, the photoluminescence and magnetism coexist in this multifunctional heterojunction with outstanding biocompatibility. This work suggests that integration of magnetism and photoluminescence could be accomplished by particular interfacial orbital hybridization.     

Synthesis and Properties of Highly Photoluminescent and Electrochemically Active Polymers Containing 2‐Pyrazoline Units in the Main Chain

Summary: Two new polymers containing 2‐pyrazoline units in the main chain were synthesized for the first time by a Suzuki polycondensation between a 2‐pyrazoline monomer and aryl diboronic esters. The polymers showed high photoluminescence (PL) in both the solution and the solid state; quantum yields of PL in toluene were higher than 76%. Thermogravimetric analysis and cyclic voltammetry showed that the polymers had high thermal stability and good reversibility under electrochemical oxidation.

New polymers ( 2 and 3 ) with strong photoluminescence and good reversibility under electrochemical oxidation were synthesized here.     

Effect of the thiol-thiolate equilibrium on the photophysical properties of aqueous CdSe/ZnS nanocrystal quantum dots

We study the effect of thiols on the emission efficiency of aqueous CdSe/ZnS core/shell nanocrystal quantum dots (NQDs). We observe that the impact of thiol addition on emission quantum yields (QYs) is time-, concentration-, and pH-dependent. Further, we use a combination of time-resolved spectroscopic methods to determine the mechanism by which thiol addition can cause either increases or decreases in QYs. Specifically, through transient absorption measurements, we show that thiol addition can improve passivation of electron traps, increasing QYs at low thiol concentrations. Further, using nanosecond photoluminescence (PL), we observe that at higher thiol concentrations, hole traps are introduced that reduce PL QYs. Last, through a combination of pH-dependence and control studies (e.g., addition of 2-methyl thioethanol to an aqueous NQD solution and addition of dodecanethiol to a hexane NQD solution), we demonstrate that it is the ability of thiols in aqueous solution to generate thiolate that is the source of both favorable and adverse QY changes. Our results contribute to the understanding of the role of surface ligands, which is critical to the design of stable, high-quantum-yield, nonblinking NQDs.     

Design and evaluation of polymer matrices for the encapsulation of CdSe/ZnS quantum dots in photonic nanocomposite thin films

A systematic approach and a new scheme for the evaluation of the as–is encapsulation of CdSe/ZnS core/shell quantum dots into polymer matrices is proposed, aiming to the implementation of thin film photonic integrated structures. Work focuses on quantum dots capped by hexadecylamine and trioctylphosphine oxide with no ligand exchange or other intermediate processing steps involved. The polymers studied include poly(methyl–methacrylate) (PMMA), polystyrene and acrylic polymers incorporating long alkyl chains, which are expected to promote the compatibility of the quantum dot ligands to that of the polymer chains. In this approach, the variation of photoluminescence properties of the nanocomposite thin films is measured versus increased concentration of the quantum dots, so as to evaluate the suitability of each polymer structure as an efficient host. Furthermore, the refractive index of the quantum dots/polymer nanocomposite thin films are also estimated using white light reflectance spectroscopy data, as appropriate for the integration of photonic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 552–560     

ZnS∶Co半导体量子点的制备及其光电化学性质

采用低温水热技术,分别以柠檬酸(CA)和巯基丙酸(MPA)为稳定剂,在70℃的水相中合成了单分散的,粒子尺寸约为4 nm的ZnS∶Co半导体量子点.研究了稳定剂、Co2+掺杂剂及其掺杂量对掺杂量子点发光性能和结构的影响.XRD结果表明,Co2+离子主要掺杂在量子点表面,对主体ZnS晶格没有影响.当采用MPA为稳定剂,掺杂量为5%(摩尔分数)时,掺杂量子点的荧光发射强度最高;而同样掺杂量下采用CA为稳定剂时,量子点的荧光发射强度有所下降.循环伏安研究显示,与空白ZnS量子点相比,Co2+离子的掺杂在ZnS的禁带中形成杂质能级,相应地,ZnS∶Co量子点的吸收边发生红移.与未掺杂ZnS量子点相比,掺杂量子点具有较少的表面非辐射复合中心,因而荧光发射强度显著提高.     

Catalytic Molecular Imaging of MicroRNA in Living Cells by DNA‐Programmed Nanoparticle Disassembly

Molecular imaging is an essential tool for disease diagnostics and treatment. Direct imaging of low‐abundance nucleic acids in living cells remains challenging because of the relatively low sensitivity and insufficient signal‐to‐background ratio of conventional molecular imaging probes. Herein, we report a class of DNA‐templated gold nanoparticle (GNP)–quantum dot (QD) assembly‐based probes for catalytic imaging of cancer‐related microRNAs (miRNA) in living cells with signal amplification capacity. We show that a single miRNA molecule could catalyze the disassembly of multiple QDs with the GNP through a DNA‐programmed thermodynamically driven entropy gain process, yielding significantly amplified QD photoluminescence (PL) for miRNA imaging. By combining the robust PL of QDs with the catalytic amplification strategy, three orders of magnitude improvement in detection sensitivity is achieved in comparison with non‐catalytic imaging probe, which enables facile and accurate differentiation between cancer cells and normal cells by miRNA imaging in living cells.