Inhibited phenol ionization in reverse micelles: confinement effect at the nanometer scale

We found that the absorption spectra of 2-acetylphenol (2-HAP), 4-acetylphenol (4-HAP), and p-nitrophenol (p-NPh) in water/sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT)/n-heptane reverse micelles (RMs) at various W(0) (W(0) = [H(2)O]/[surfactant]) values studied changed with time if (-)OH ions were present in the RM water pool. There is an evolution of ionized phenol (phenolate) bands to nonionized phenol absorption bands with time and this process is faster at low W(0) values and with phenols with higher bulk water pK(a) values. That is, in bulk water and at the hydroxide anion concentration used, only phenolate species are observed, whereas in AOT RMs at this fixed hydroxide anion concentration, ionized phenols convert into nonionized phenol species over time. Furthermore, we demonstrate that, independent of the (-)OH concentration used to prepare the AOT RMs, the nonionized phenols are the more stable species in the RM media. We explain our results by considering that strong hydrogen-bonding interactions between phenols and the AOT polar head groups result in the existence of only nonionized phenols at the AOT RM interface. The situation is quite different when the phenols are dissolved in cationic benzyl-n-hexadecyldimethylammonium chloride RMs. Therein, only phenolates species are present at the (-)OH concentrations used. The results clearly demonstrate that the classical definition of pH does not apply in a confined environment, such as in the interior of RMs and challenge the general idea that pH can be determined inside RMs.     

Photophysics and locations of IR125 and C152 in AOT reverse micelles

Many fluorescent chromophores have been employed to investigate the nature and dynamics of the water confined in reverse micelles (RMs). However, some questions remain as to the location of a probe in a RM and the diameter of the RM at which the physical characteristic of the water inside RMs becomes similar to that of bulk water. In this work, we systematically studied the photophysics of IR125 and C152 in AOT RMs at different w(0) by means of static absorption and fluorescence spectroscopy as well as time-resolved fluorescence spectroscopy. We obtained the absorption maxima, fluorescence emission maxima, fluorescence lifetime, and reorientation time of IR125 and C152 in AOT RMs at corresponding w(0). We found that all obtained photophysical parameters of IR125 and C152 in AOT RMs as a function of w(0) have a distinct changeover point around w(0) = 8, indicating that there is a dramatic change in the nature of the water confined in AOT RMs around w(0) = 8. The observed changeover point around w(0) = 8 is well in agreement with the Satpati's report (ChemPhysChem, 2009, 10, 2966). In addition, we observed that the measured reorientation time of IR125 in AOT RMs increases with the increase of w(0), which is opposite to the trend of change in the measured reorientation time of C152 in AOT RMs with the increase of w(0). We found that IR125 prefers to reside in the water pool of AOT RMs and that C152 prefers to reside in the outer side of the interfacial region or the nonpolar n-heptane phase of AOT RMs. Furthermore, we found that the time-resolved fluorescence anisotropy of IR125 in smaller w(0) AOT RMs primarily measures the reorientation of RMs and the time-resolved fluorescence anisotropy of IR125 in larger w(0) AOT RMs measures the reorientation of IR125 in the water pool confined in RMs. This work demonstrated that IR125 is an excellent probe to study the nature and dynamics of the water confined in AOT RMs.     

What can you learn from a molecular probe? New insights on the behavior of C343 in homogeneous solutions and AOT reverse micelles

The behavior of C343, a common molecular probe utilized in solvation dynamics experiments, was studied in homogeneous media and in aqueous and nonaqueous reverse micelles (RMs). In homogeneous media, the Kamlet and Taft solvatochromic comparison method quantified solute-solvent interactions from the absorption and emission bands showing that the solvatochromic behavior of the dye depends not only on the polarity of the medium but also on the hydrogen-bonding properties of the solvent. Specifically, in the ground state the molecule displays a bathochromic shift with the polarity polarizability (pi) and the H-bond acceptor (beta) ability of the solvents and a hypsochromic shift with the hydrogen donor ability (alpha) of the media. The carboxylic acid group causes C343 to display greater sensitivity to the beta than to the pi polarity parameter; this sensitivity increases in the excited state, while the dependence on alpha vanishes. This demonstrates that C343 forms a stable H-bond complex with solvents with high H-bond acceptor ability (high beta) and low H-bond donor character (low alpha). Spectroscopy in nonpolar solvents reveals J-aggregate formation. With information from the Kamlet-Taft analysis, C343 was used to explore RMs composed of water or polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/isooctane using absorption, emission, and time-resolved spectroscopies. Sequestered polar solvents included ethylene glycol (EG), formamide (FA), N,N-dimethylformamide (DMF), and N,N-dimethylacetamide (DMA). Dissolved in the AOT RM systems at low concentration, C343 exists as a monomer, and when introduced to the RM samples in its protonated form, C343 remains protonated driving it to reside in the interface rather than the water pool. The solvathochromic behavior of the dye depends the specific polar solvent encapsulated in the RMs, revealing different types of interactions between the solvents and the surfactant. EG and water H-bond with the AOT sulfonate group destroying their bulk H-bonded structures. While water remains well segregated from the nonpolar regions, EG appears to penetrate into the oil side of the interface. In aqueous AOT RMs, C343 interacts with neither the sulfonate group nor the water, perhaps because of intramolecular H-bonding in the dye. DMF and DMA interact primarily through dipole-dipole forces, and the strong interactions with AOT sodium counterions destroy their bulk structure. FA also interacts with the Na+ counterions but retains its H-bond network present in bulk solvent. Surprisingly, FA appears to be the only polar solvent other than water forming a "polar-solvent pool" with macroscopic properties similar to the bulk.     

Self-assembly vesicles made from a cyclodextrin supramolecular complex

Self-assembly vesicles have been made from a cyclodextrin (CD) supramolecular complex, which is cooperatively formed with natural beta-CD, 1-naphthylammonium chloride (NA), and sodium bis(2-ethyl-1-hexyl)sulfosuccinate (AOT) by weak noncovalent interactions. In the complex structure, a NA molecule is included inside a beta-CD molecule while it is coupled with an AOT molecule on one side. The supramolecular structure and morphology of the vesicles were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mechanism of vesicle formation and transition is discussed along with the data obtained from induced circular dichroism (ICD) and UV/visible spectroscopy, polarized optical microscopy (POM), and (1)H NMR spectroscopy. Both the fabrication and the transition of vesicles are controlled by the inclusion equilibria and the cooperative binding of noncovalent interactions, which include the "key-lock" principle, electrostatic interactions, pi-pi stacking, and amphiphilic hydrophobic association.     

The effect of different interfaces and confinement on the structure of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide entrapped in cationic and anionic reverse micelles

The behavior of the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) entrapped in two reverse micelles (RMs) formed in an aromatic solvent as dispersant pseudophase: [bmim][Tf(2)N]/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/chlorobenzene and [bmim][Tf(2)N]/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/chlorobenzene, was investigated using dynamic light scattering (DLS), FT-IR and (1)H NMR spectroscopies. DLS results reveal the formation of RMs containing [bmim][Tf(2)N] as a polar component since the droplet size values increase as the W(s) (W(s) = [[bmim][Tf(2)N]]/[surfactant]) increases. Furthermore, it shows that the RMs consist of discrete spherical and non-interacting droplets of [bmim][Tf(2)N] stabilized by the surfactants. Important differences in the structure of [bmim][Tf(2)N] entrapped inside BHDC RMs, in comparison with the neat IL, are observed from the FT-IR and (1)H NMR measurements. The electrostatic interactions between anions and cations from [bmim][Tf(2)N] and BHDC determine the solvent structure encapsulated inside the nano-droplets. It seems that the IL structure is disrupted due to the electrostatic interaction between the [Tf(2)N](-) and the cationic BHDC polar head (BHD(+)) giving a high ion pair degree between BHD(+) and [Tf(2)N](-) at a low IL content. On the other hand, for the AOT RMs there is no evidence of strong IL-surfactant interaction. The electrostatic interaction between the SO(3)(-) group and the Na(+) counterion in AOT seems to be stronger than the possible [bmim](+)-SO(3)(-) interaction at the interface. Thus, the structure of [bmim][Tf(2)N] encapsulated is not particularly disrupted by the anionic surfactant at all W(s) studied, in contrast to the BHDC RM results. Nevertheless, there is evidence of confinement in the AOT RMs because the [bmim](+)-[Tf(2)N](-) interaction is stronger than in bulk solution. Thus, the IL is more associated upon confinement. Our results reveal that the [bmim][Tf(2)N] structure can be modified in a different manner inside RMs by varying the kind of surfactant used to create the RMs and the IL content (W(s)). These facts can be very important if these media are used as nanoreactors because unique microenvironments can be easily created by simply changing the RM components and W(s).     

Effect of Confinement on the Properties of Sequestered Mixed Polar Solvents: Enzymatic Catalysis in Nonaqueous 1,4‐Bis‐2‐ethylhexylsulfosuccinate Reverse Micelles

The influence of different glycerol, N,N‐dimethylformamide (DMF) and water mixtures encapsulated in 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT)/n‐heptane reverse micelles (RMs) on the enzymatic hydrolysis of 2‐naphthyl acetate by α‐chymotrypsin is demonstrated. In the case of the mixtures with DMF and protic solvents it has been previously shown, using absorption, emission and dynamic light‐scattering techniques, that solvents are segregated inside the polar core of the RMs. Protic solvents anchor to the AOT, whereas DMF locates to the polar core of the aggregate. Thus, DMF not only helps to solubilize the hydrophobic substrate, increasing its effective concentrations but surprisingly, it does not affect the enzyme activity. The importance of ensuring the presence of RMs, encapsulation of the polar solvents and the corrections by substrate partitioning in order to obtain reliable conclusions is highlighted. Moreover, the effect of a constrained environment on solvent–solvent interactions in homogenous media and its impact on the use of RMs as nanoreactors is stressed.     

Changing mechanisms in the beta-cyclodextrin-mediated hydrolysis of phenyl esters of perfluoroalkanoic acids

The rate of hydrolysis of esters CF(3)(CF(2))(n)COOPh (1 (n = 1), 2 (n = 2), and 3 (n = 6)) was measured at pH 6.00 and at pH higher than 9.00 in the presence of beta-cyclodextrin (beta-CD). For compounds 1 and 2 the reaction rate decreases as the beta-CD concentration increases, and they show saturation effects at all pH. It is suggested that the substrate forms an inclusion complex with cyclodextrin. Analysis of the rate data allows calculation of the association equilibrium constant, K(CD), the rate constant for the reaction of the included compound, k(c), and K(TS) which is the hypothetical association equilibrium constant for the transition state of the cyclodextrin-mediated reaction. The dependence of log K(CD) and log K(TS) with the number of atoms in the chain is different. We suggest that the reactions of 1 and 2 take place with the perfluorinated alkyl chain included in the cavity, whereas the transition state for the reaction of phenyl trifluoroacetate involves a complex with the aryl ring inside the cavity. At low pH the inhibition comes from the protection of the carbonyl group toward nucleophilic attack by water. In basic pH the reaction of HO(-) as an external nucleophile is also inhibited. The cyclodextrin-mediated reaction involves the ionized OH group at the rim of the cyclodextrin cavity with poor efficiency due to an unfavorable orientation of the substrate in the complex. On the other hand, the reaction of compound 3 is strongly accelerated by cyclodextrin because the association of the substrate with cyclodextrin competes with the monomer-aggregate equilibrium and at high enough cyclodextrin concentration the main species present in solution is the complex between 3 and cyclodextrin.     

Ion pairs of crystal violet in sodium bis(2-ethylhexyl)sulfosuccinate reverse micelles

The interfacial localization and the ion pair formation of the positively charged dye crystal violet (CV) in sodium bis(2-ethylhexyl)sulfosuccinate reverse micelles (AOT RMs) were studied by several structural and spectroscopic techniques and by quantum chemical calculations. The size and shape of the AOT RMs in the presence of CV were investigated by small-angle X-ray scattering, showing that CV does not significantly change the RM structure. CV localization as a function of the water to surfactant molar ratio (w(0)) was characterized by H(1) and (13)C NMR, indicating the close proximity of CV to the sulfosuccinate group of AOT at small and large w(0) values. These results were confirmed by calculation of magnetic shielding constants using the gauge-independent atomic orbital method with the HF/6-31G(d) basis set. Two different types of ion pairs between AOT and CV, i.e., contact ion pair (CIPs) and solvent-separated ion pair (SSIPs), were characterized by UV-vis spectroscopy and quantum chemical calculations using the semiempirical ZINDO-CI method. In nonpolar isotropic solvents CIPs are formed with an association constant (K(ASSOC)) of 2 x 10(4) mol(-1) L in isooctane and 750 mol(-1) L in chloroform. In AOT RMs at low w(0), CV-AOT CIPs are also formed. By increasing w(0), there is a sharp decrease in the CIP association free energy, and SSIPs are formed. (CV(+))(H(2)O)(AOT(-)) SSIPs are stable in the AOT RM up to the largest w(0) tested (w(0) = 33).     

Fourier transform infrared spectroscopy of azide and cyanate ion pairs in AOT reverse micelles

Evidence for ion pair formation in aqueous bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles (RMs) was obtained from infrared spectra of azide and cyanate with Li(+), Na(+), K(+), and NH(4)(+) counterions. The anions' antisymmetric stretching bands near 2000 cm(-1) are shifted to higher frequency (blueshifted) in LiAOT and to a lesser extent in NaAOT, but they are very similar to those in bulk water with K(+) and NH(4)(+) as the counterions. The shifts are largest for low values of w(o) = [water]/[AOT] and approach the bulk value with increasing w(o). The blueshifts are attributed to ion pairing between the anions and the counterions. This interpretation is reinforced by the similar trend (Li(+)>Na(+)>K(+)) for producing contact ion pairs with the metal cations in bulk dimethyl sulfoxide (DMSO) solutions. We find no evidence of ion pairs being formed in NH(4)AOT RMs, whereas ammonium does form ion pairs with azide and cyanate in bulk DMSO. Studies are also reported for the anions in formamide-containing AOT RMs, in which blueshifts and ion pair formation are observed more than in the aqueous RMs. Ion pairs are preferentially formed in confined RM systems, consistent with the well established ideas that RMs exhibit reduced polarity and a disrupted hydrogen bonding network compared to bulk water and that ion-specific effects are involved in mediating the structure of species at interfaces.     

Self-inclusion behavior and circular dichroism of aliphatic chain-linked beta-cyclodextrin-viologen compounds and their reduced forms depending on the side of modification

[Reaction: see text]. The self-inclusion behavior and induced circular dichroism (ICD) characteristics of two beta-cyclodextrin (beta-CD) derivatives, in which a 1-methyl-4,4'-bipyridinium (viologen) group is connected by an octamethylene chain to either the primary (2(2+)) or secondary (3(2+)) side of beta-CD, and of their reduced forms, are investigated. 1H NMR studies showed that 2(2+) forms an intramolecular self-inclusion complex with K(in) = 3.1 +/- 0.4, whereas 3(2+) forms a head-to-head type of dimer with K(D) = 65 +/- 10 M(-1) at 25 degrees C. 2(2+) and 3(2+) form [2]pseudorotaxanes with alpha-CD, with the secondary side of the alpha-CD facing the viologen moiety. The ICD characteristics of mono-6-[4-(1-methyl-4-pyridinio)-1-pyridinio]-beta-CD (1(2+)), 2(2+), 3(2+), and methyloctyl viologen-beta-CD complexes were obtained for the oxidized and reduced states of the viologen units. The results indicated dimer formation for 1 degrees , and intramolecular complexation for 2*+ and 2 degrees in which the reduced viologen units are outside the beta-CD cavity. The results also indicated intramolecular complexation for 3*+ and 3 degrees, but with reduced viologen units inside the cavity. This work provides unequivocal evidence of the preference of the secondary side of cyclodextrins for viologen groups, regardless of their oxidation states, and the dependence of ICD of the viologen chromophores on their location with respect to the CD cavity.     

Effect of the Cationic Surfactant Moiety on the Structure of Water Entrapped in Two Catanionic Reverse Micelles Created from Ionic Liquid‐Like Surfactants

The behavior of water entrapped in reverse micelles (RMs) formed by two catanionic ionic liquid‐like surfactants, benzyl‐n‐hexadecyldimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐BHD) and cetyltrimethylammonium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT‐CTA), was investigated by using dynamic (DLS) and static (SLS) light scattering, FTIR, and ¹H NMR spectroscopy techniques. To the best of our knowledge, this is the first report in which AOT‐CTA has been used to create RMs and encapsulate water. DLS and SLS results revealed the formation of RMs in benzene and the interaction of water with the RM interface. From FTIR and ¹H NMR spectroscopy data, a difference in the magnitude of the water–catanionic surfactant interaction at the interface is observed. For the AOT‐BHD RMs, a strong water–surfactant interaction can be invoked whereas for AOT‐CTA this interaction seems to be weaker. Consequently, more water molecules interact with the interface in AOT‐BHD RMs with a completely disrupted hydrogen‐bond network, than in AOT‐CTA RMs in which the water structure is partially preserved. We suggest that the benzyl group present in the BHD⁺ moiety in AOT‐BHD is responsible for the behavior of the catanionic interface in comparison with the interface created in AOT‐CTA. These results show that a simple change in the cationic component in the catanionic surfactant promotes remarkable changes in the RMs interface with interesting consequences, in particular when using the systems as nanoreactors.     

Vibrational relaxation of azide in formamide reverse micelles

Static and ultrafast infrared spectroscopy have been used to measure absorption spectra and vibrational energy relaxation (VER) times for the antisymmetric stretching vibrational band of azide, N(3)(-), in formamide-containing reverse micelles (RMs). RMs were formed in n-heptane using the surfactant AOT, sodium bis(2-ethylhexyl) sulfosuccinate. The VER times were found to be significantly longer than in bulk formamide. The VER times became longer as the molar ratio of formamide to AOT, omega(F), was decreased. Decreasing omega(F) also resulted in substantial blue shifts of the azide static absorption band compared to the frequency in bulk formamide. The omega(F) dependent studies are consistent with expected size trends, where a larger RM results in more bulklike polar solvent and faster VER rates. These results are in contrast to aqueous AOT RMs where VER times were indistinguishable from those in the bulk and the static spectral shifts were much smaller. The differences between the static and dynamic behavior in aqueous and formamide RMs are related to differences in structural changes upon confinement in RMs.     

Sizing of Reverse Micelles in Microemulsions using NMR Measurements of Diffusion

This paper reports the size of reverse micelles (RMs) in AOT/octane/H(2)O and CTAB/hexanol/H(2)O microemulsions using magnetic resonance (MR) pulsed field gradient (PFG) measurements of diffusion. Diffusion data were measured using the pulsed gradient stimulated echo (PGSTE) experiment for surfactant molecules residing in the RM interface. Inverse Laplace transformation of these data generated diffusion coefficients for the RMs, which were converted into hydrodynamic radii using the Stokes-Einstein relation. This technique is complementary to those previously used to size RMs, such as dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), but also offers several advantages, which are discussed. RM sizes, determined using the PGSTE method, in the AOT (sodium bis(2-ethylhexyl) sulfosuccinate) and CTAB (cetyltrimethylammonium bromide) microemulsions were compared with previous DLS and SAXS data, showing good agreement. Methods for determining number distributions from the PGSTE data, through the use of scaling factors, were investigated.     

Photodetachment of ferrocyanide in reverse micelles

Solvated electrons have been generated in reverse micelles (RMs) through photodetachment of ferrocyanide (Fe(CN)(6)(4-)) in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) RMs. We have measured both bleach recovery of the parent ferrocyanide CN stretch in the infrared and the decay of the solvated electron absorption at 800 nm. The bleach recovery has been fit to a diffusion model for the geminate recombination process. The fit parameters suggest a narrowing of the spatial distribution of ejected electrons due to confinement in the RMs when compared to bulk water. The diffusion coefficient of the solvated electron does not appear to be significantly affected by RM confinement. The decay of the solvated electron absorption exhibits an additional decay component that is not observed in bulk water and is smaller for larger RMs. No corresponding additional component is seen in the parent ferrocyanide IR bleach recovery, which supports our interpretation that the confinement-induced new decay process in RMs is due to electrons reacting with AOT headgroups.     

Synthesis and characterization of an amphiphilic cyclodextrin, a micelle with two recognition sites

A cyclodextrin derivative (Mod-CD) was synthesized through the monoesterification of beta-cyclodextrin (beta-CD) with 3-((E)-dec-2-enyl)-dihydrofuran-2,5-dione. The compound is an interesting surfactant that can form large aggregates not only through the interaction of the hydrophobic tails as in common amphiphilic compounds but also through the inclusion of the alkenyl chain into the cavity of another Mod-CD molecule. The self-inclusion of the chain in the cavity of cyclodextrin as well as the intermolecular inclusion was demonstrated by 1H NMR measurements that were able to detect methyl groups in three different environments. Besides, in the aggregates of Mod-CD, the cavity is available to interact with external guests such as phenolphthalein, 1-amino adamantane, and Prodan. Phenolphthalein has the same binding constant with Mod-CD and beta-CD, but the equilibrium constant for the interaction with Prodan is about 2 times larger for Mod-CD than for beta-CD. The latter result is attributed to the fact that this probe interacts with the micelle in two binding sites: the cavity of the cyclodextrin and the apolar heart of the micelle as evidenced by the spectrofluorimetric behavior of Prodan in solutions containing different concentrations of Mod-CD.     

Preparation and enantioseparation characteristics of a novel chiral stationary phase based on mono (6(A)-azido-6(A)-deoxy)-per(p-chlorophenylcarbamoylated) beta-cyclodextrin

A novel cyclodextrin (CD) derivative-mono (6(A)-azido-6(A)-deoxy)-per(p-chlorophenylcarbamoylated) beta-CD was synthesized and chemically immobilized onto the surface of amino-functionalized silica gel to afford a structurally well-defined chiral stationary phase (CSP) for high performance liquid chromatography (HPLC). The p-chlorophenyl groups introduced on the beta-CD are pi-electron deficient (i.e., pi-acidic moieties); therefore the stronger pi-pi interaction which plays an important role in chiral recognition process is expected between aromatic analytes and this type of the CSP. The enantiomeric separations of 11 piperazine derivatives as well as six racemates have been successfully achieved on this CSP in the normal and reversed phase modes.     

Studies on the chiral recognition of peptide enantiomers by neutral and sulfated beta-cyclodextrin and heptakis-(2,3-di-O-acetyl)-beta-cyclodextrin using capillary electrophoresis and nuclear magnetic resonance

The separation of dipeptide and tripeptide enantiomers using a neutral single isomer cyclodextrin (CD) derivative, heptakis-(2,3-di-O-acetyl)-beta-CD (DIAC-beta-CD), was investigated with respect to the amino acid sequence applying standard separation conditions. With only one exception the DD-enantiomers migrated faster than the LL-stereoisomers. Separations obtained for the same set of peptides using beta-CD and the sulfated single isomer derivatives heptakis-(2,3-di-O-acetyl-6-sulfo)-beta-CD (HDAS-beta-CD) and heptakis-6-sulfo-beta-CD (HS-beta-CD) revealed identical enantiomer migration order in the presence of the 2,3-disubstituted derivatives DIAC-beta-CD and HDAS-beta-CD. In contrast, reversed migration sequence was found for beta-CD and HS-beta-CD compared to DIAC-beta CD and HDAS-beta-CD indicating the importance of the substitution pattern on the wider rim of the CD cavity on the chiral recognition of the peptide enantiomers by the CDs. Nuclear magnetic resonance (NMR) experiments indicated different complexation modes between the enantiomers and the CDs depending on the presence of acetyl substituents on the wider rim of the CD torus. Thus, the CD-induced chemical shifts observed in samples containing Ala-Phe or Ala-Tyr and beta-CD or HS-beta-CD were consistent with an inclusion of the aromatic moiety into the CD cavity. Although the CD-induced chemical shifts in the presence of DIAC-beta-CD and HDAS-beta-CD did not allow direct conclusions on the complexation mode they substantially differed from those observed in the presence of 2,3-unsubstituted CDs indicating different structures of the peptide-CD complexes.     

Comparison between two anionic reverse micelle interfaces: the role of water-surfactant interactions in interfacial properties

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission.     

Photoreactive surfactants: a facile and clean route to oxide and metal nanoparticles in reverse micelles

A new class of photoreactive surfactants (PRSs) is presented here, consisting of amphiphiles that can also act as reagents in photochemical reactions. An example PRS is cobalt 2-ethylhexanoate (Co(EH)(2)), which forms reverse micelles (RMs) in a hydrocarbon solvent, as well as mixed reversed micelles with the standard surfactant Aerosol-OT (AOT). Small-angle neutron scattering (SANS) data show that mixed AOT/PRS RMs have a spherical structure and size similar to that of pure AOT micelles. Excitation of the ligand-to-metal charge transfer (LMCT) band in the PRSs promotes electron transfer from PRS to associated metal counterions, leading to the generation of metal and metal-oxide nanoparticles inside the RMs. This work presents proof of concept for employing PRSs as precursors to obtain nearly monodisperse inorganic nanoparticles: here both Co(3)O(4) and Bi nanoparticles have been synthesized at high metal concentration (10(-2) M) by simply irradiating the RMs. These results point toward a new approach of photoreactive self-assembly, which represents a clean and straightforward route to the generation of nanomaterials.     

Comparative study of the photophysical behavior of fisetin in homogeneous media and in anionic and cationic reverse micelles media

The 3,3', 4',7 tetrahydroxiflavone (fisetin) is a natural therapeutically active and fluorescent polyhydroxyflavone, with important spectroscopic and biological behavior. Fisetin shows dual emission, with a normal band (N) from the S1 --> S0 transition and the one generated in the excited state (phototautomer; PT) from the intramolecular proton transfer (ESIPT) process. The influence of different interfaces on the ESIPT process of fisetin was investigated in reverse micelles media (RMs) made of the anionic sodium 1,4-bis (2-ethylhexyl) sulfosuccinate (AOT) and cationic benzyl n-hexadecyl dimethylammonium chloride (BHDC) surfactants, in benzene. The studies were carried out by absorption, emission spectroscopy, steady-state anisotropy and time-resolved fluorescence measurements. Fisetin behavior was also investigated in homogeneous media with special emphasis in water and benzene, which are the polar core and the organic pseudofase in the RMs, respectively. In addition, the effect of concentration in benzene and the variation of the pH in water were studied. Fluorescence lifetime measurements show that in water the ESIPT process is independent on the concentration, while in benzene it was possible to detect fluorescent aggregate species (Nas) formed in the ground state. The effect of the pH in water allowed us to identify the anionic fisetin (A-) emission. The studies in RMs show that fisetin interacts specifically with the head of the surfactants, which always results in diminishing the emission of the PT. Also the formation of A- is detected particularly at W0 > 0. Appreciable high anisotropy values are obtained in RMs, as compared with those in fluid homogeneous media, which are independent of the water content confirming that fisetin molecules are anchored in the anionic as well as in the cationic interfaces.