Enhanced electrochemiluminescence sensor from tris(2,2'-bipyridyl)ruthenium(II) incorporated into MCM-41 and an ionic liquid-based carbon paste electrode

The electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] ion-exchanged in the sulfonic-functionalized MCM-41 silicas was developed with tripropylamine (TPrA) as a co-reactant in a carbon paste electrode (CPE) using a room temperature ionic liquid (IL) as a binder. The sulfonic-functionalized silicas MCM-41 were used for preparing an ECL sensor by the electrostatic interactions between Ru(bpy)(3)(2+) cations and sulfonic acid groups. We used the IL as a binder to construct the CPE (IL-CPE) to replace the traditional binder of the CPE (T-CPE)--silicone oil. The results indicated that the MCM-41-modified IL-CPE had more open structures to allow faster diffusion of Ru(bpy)(3)(2+) and that the ionic liquid also acted as a conducting bridge to connect TPrA with Ru(bpy)(3)(2+) sites immobilized in the electrode, resulting in a higher ECL intensity compared with the MCM-41-modified T-CPE. Herein, the detection limit for TPrA of the MCM-41-modified IL-CPE was 7.2 nM, which was two orders of magnitude lower than that observed at the T-CPE. When this new sensor was used in flow injection analysis (FIA), the MCM-41-modified IL-CPE ECL sensor also showed good reproducibility. Furthermore, the sensor could also be renewed easily by mechanical polishing whenever needed.     

金属有机化学气相沉积法制备SnO2/MCM-41半导体传感器及其性能研究

采用金属有机化学气相沉积(MOCVD)法制备了SnO2/MCM-41半导体传感器, 考察了沉积时间和沉积温度对SnO2/MCM-41半导体传感器的SnO2沉积量、比表面积和孔径的影响; 研究发现, 随着SnO2沉积量的增加, 孔径有规律地下降, 说明SnO2较均匀地沉积在介孔分子筛MCM-41的孔道之中. SnO2/MCM-41半导体传感器对CO和H2具有较高的传感性能, 其传感性能的大小与CO和H2的浓度成正比.     

Mesoporous silica-based electrochemical sensor for sensitive determination of environmental hormone bisphenol A

Bisphenol A (BPA) is an emerging contaminant with severe toxic effects such as disrupting endocrine system or causing cancer, therefore, developing sensitive and selective sensor for BPA is very important and interesting. Herein, MCM-41, a kind of mesoporous silica, was synthesized and then used to prepare an electrochemical sensor for BPA. For better comparison, carbon nanotubes, activated carbon, silica gel and graphite were also employed to prepare electrochemical sensor for BPA. The electrochemical behaviors of BPA at different electrochemical sensors were investigated. Compared with other sensors, the MCM-41 sensor greatly enhances the response signal of BPA due to the large active surface area and high accumulation efficiency. The effects of pH value, accumulation time and sensor composition were examined. The linear range is from 2.2 × 10⁻⁷ to 8.8 × 10⁻⁶ mol L⁻¹, and the limit of detection is evaluated to be 3.8 × 10⁻⁸ mol L⁻¹. Finally, the MCM-41 sensor was successfully employed to determine BPA in water samples.     

Amino-functionalized mesoporous silica modified glassy carbon electrode for ultra-trace copper(II) determination

This paper described a facile and direct electrochemical method for the determination of ultra-trace Cu²⁺ by employing amino-functionalized mesoporous silica (NH₂-MCM-41) as enhanced sensing platform. NH₂-MCM-41 was prepared by using a post-grafting process and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and fourier transform infrared (FTIR) spectroscopy. NH₂-MCM-41 modified glassy carbon (GC) electrode showed higher sensitivity for anodic stripping voltammetric (ASV) detection of Cu²⁺ than that of MCM-41 modified one. The high sensitivity was attributed to synergistic effect between MCM-41 and amino-group, in which the high surface area and special mesoporous morphology of MCM-41 can cause strong physical absorption, and amino-groups are able to chelate copper ions. Some important parameters influencing the sensor response were optimized. Under optimum experimental conditions the sensor linearly responded to Cu²⁺ concentration in the range from 5 to 1000 ng L⁻¹ with a detection limit of 0.9 ng L⁻¹ (S/N = 3). Moreover, the sensor possessed good stability and electrode renewability. In the end, the proposed sensor was applied for determining Cu²⁺ in real samples and the accuracy of the results were comparable to those obtained by inductively coupled plasma optical emission spectrometry (ICP-OES) method.     

基于MCM-41负载联吡啶钌的电致化学发光传感器

利用静电吸附作用将联吡啶钌[Ru(bpy)₃²⁺]负载到巯基化MCM-41介孔二氧化硅纳米颗粒上, 通过金-巯键修饰法将负载后的MCM-41固定在金电极表面, 发展了一种基于MCM-41负载联吡啶钌的电致化学发光传感器, 并研究了其电化学及电致化学发光行为. 基于三聚氰胺与增敏剂三正丙胺氨基结构的相似性, 将负载Ru(bpy)₃²⁺的MCM-41电致化学发光传感器用于三聚氰胺的检测, 获得了良好的检测效果, 为检测三聚氰胺提供了一种快速、简便的方法. 同时, 该研究为Ru(bpy)₃²⁺在电极表面的固定化提供了新思路.     

Fe/MCM-41 as a promising heterogeneous catalyst for ozonation of p-chlorobenzoic acid in aqueous solution

Mesoporous MCM-41 and Fe loaded MCM-41（Fe/MCM-41）,which were successfully prepared by a hydrothermal method and a dipping method respectively,were applied as heterogeneous catalysts for ozonation of p-chlorobenzoic acid（p-CBA） in aqueous solution.MCM-41 and Fe/MCM-41 were characterized by XRD,FT-IR and diffuse reflectance UV-vis（DR-UV-vis） techniques. The presence of either MCM-41 or Fe/MCM-41 improves p-CBA and total organic carbon（TOC） removal efficiency compared to ozonation alone.Under the experimental condition,TOC removal rate of Fe/MCM-41/O₃ process is over 63.5%at 60 min oxidation time,44.5%using MCM-41 as catalyst,only 37.7%with ozonation alone.The presence of tert-butanol（TBA） in the Fe/MCM-41/ O₃ process indicated that the oxidation mechanism of p-CBA occurs via OH in the liquid bulk.And Fe/MCM-41 is a promising catalyst.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

Deoxydesulfurization of dibenzothiophene sulfone over cesium/MCM-41 catalysts

Dibenzothiophene sulfone, one of the products of the oxidative desulfurization of heavy oil, can be utilized through catalytic cracking. The object of the present study is to provide Cs/MCM-41 catalysts for the removal of sulfur dioxide from dibenzothiophene sulfone. Cesium oxide was deposited via an impregnation method on MCM-41, and the catalytic performances of the samples were investigated during the deoxydesulfurization of dibenzothiophene sulfone to biphenyl and sulfur dioxide gas. The influence of cesium loading on the basic properties of MCM-41 was estimated by the temperature-programmed desorption of carbon dioxide. The dibenzothiophene sulfone conversions of the MCM-41, Cs(1 wt%)/MCM-41, Cs(3 wt%)/MCM-41 and Cs(10 wt%)/MCM-41 catalysts were 38.5, 52.1, 72.4 and 40.9%, respectively, which implies that the Cs(3 wt%)/MCM-41 catalyst has the highest activity. This result agrees with the finding of the basicity enhancement of MCM-41 with the addition of cesium, in which Cs(3 wt%)/MCM-41 exhibited a maximum number of basic sites.     

杂原子介孔Co-MCM-41分子筛的制备及其吸附脱氮性能

采用水热法合成了介孔MCM-41和Co-MCM-41分子筛,并利用XRD、FT-IR、低温N₂吸附-脱附和NH₃-TPD等方法对合成的分子筛进行了表征。考察了晶化时间、晶化温度、陈化时间对合成介孔Co-MCM-41分子筛的影响,确定较适宜的合成条件为陈化时间1 h,晶化温度110 ℃,晶化时间2 d。XRD 和FT-IR表征结果说明,Co原子已经进入MCM-41的骨架。MCM-41和Co-MCM-41的平均孔径均为2.82 nm,BET比表面积分别为986.42和 637.69 m²/g,孔容分别为0.762 1和0.537 2 m³/g。NH₃-TPD的表征结果表明,MCM-41和Co-MCM-41的酸性都较弱,但Co-MCM-41的酸性明显强于MCM-41。在此基础上,利用合成的MCM-41和Co-MCM-41吸附脱除氮含量为1 737.35 μg/g的模拟燃料中的喹啉。喹啉分子尺寸的模拟结果为0.711 6 nm × 0.500 2 nm,说明其可以很容易地进入MCM-41和Co-MCM-41的介孔孔道中。Co-MCM-41分子筛的氮脱除率明显高于MCM-41,这是由于其较强的酸性及与喹啉之间的化学吸附,而且,Co-MCM-41吸附脱氮具有较好的再生性能。     

Gas adsorption in mesoporous micelle-templated silicas: MCM-41, MCM-48, and SBA-15

This paper reports a molecular simulation and experimental study on the adsorption and condensation of simple fluids in mesoporous micelle-templated silicas MCM-41, MCM-48, and SBA-15. MCM-41 is described as a regular cylindrical silica nanopore, while SBA-15 is assumed to be made up of cylindrical nanopores that are connected through lateral channels. The 3D-connected topology of MCM-48 is described using a gyroid periodic minimal surface. Argon adsorption at 77 K is calculated for the three materials using Grand Canonical Monte Carlo simulations. Qualitative comparison with experiments for nitrogen adsorption in mesoporous micelle-templated silicas is made. The adsorption isotherm for SBA-15 resembles that for MCM-41. In particular, capillary condensation and evaporation are not affected by the presence of the connecting lateral channels. In contrast, the argon adsorption isotherm for MCM-48 departs from that for MCM-41 having the same pore size. While condensation in MCM-41 is a one-step process, filling of MCM-48 involves two successive jumps in the adsorbed amounts which correspond to condensation in different domains of the porosity. The condensation pressure for MCM-48 is larger than that for MCM-41. We attribute this result to the morphology of the MCM-48 surface (made up of both concave and convex regions) that differs from that for MCM-41 (concave only). Our results suggest that the pore connectivity affects pore filling when the size of the connections is comparable to that of the nanopores.     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了 Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比.与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6....     

New Routes to the Synthesis of Mesoporous Materials and Their Properties

The factors that influence the hydrothermal synthesis of MCM-41 were investigated, and it was found that compared with those from high H₂O/SiO₂ systems(designated MCM-41-A), the products from low H₂O/SiO₂ systems(designated MCM-41-B) exhibited a less-defined X-ray powder diffraction (XRD) pattern with a broader main reflection peak at a lower 2θ diffraction angle. MCM-41-B possesses a smaller surface area but a larger pore size than MCM-41-A. New routes including direct thermal treatment, room-temperature crystallization and microwave heating were developed for the formation of MCM-41, and the properties of the products prepared from these new routes were compared with those of the MCM-41 hydrothermally synthesized. The pore sizes of MCM-41 materials are uniformly distributed with an effective pore diameter that falls into the range of 2-4 nm, where as the products from wet-gel thermal treatment possess two kinds of mesopores:the well-defined smaller pores distributed at 3 nm and the larger one within 8-20 nm. The MAS NMR spectroscopy revealed that after calcination to remove the organic template in Al-containing MCM-41, a small part of the tetrahedrally-coordinated framework aluminum atoms became octahedrally-coordinated and a considerable amount of Si-OH species were generated.     

Synthesis and catalytic performance of bimetallic NiMo- and NiW-ZSM-5/MCM-41 composites for production of liquid biofuels

This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized through a self-assembly of cetyltrimethylammonium bromide( CTAB) surfactant with silica-alumina from ZSM-5 zeolite,prepared from natural kaolin by the hydrothermal technique. Subsequently,the synthesized composites were deposited with bimetallic NiMo and NiW by impregnation method. The obtained catalysts presented a micro-mesoporous structure,confirmed by XRD,SEM,TEM,EDX,NH_3-TPD,XRF and N_2 adsorption-desorption measurements. The results of CPO conversion demonstrate that the catalytic activity of the synthesized catalysts decreases in the series of NiMo-ZSM-5/MCM-41 NiW-ZSM-5/MCM-41 Ni-ZSM-5/MCM-41 Mo-ZSM-5/MCM-41 W-ZSM-5/MCM-41 NiMo-ZSM-5 NiW-ZSM-5 ZSM-5/MCM-41 ZSM-5 MCM-41. It was found that the bimetallic NiMo-and NiW-ZSM-5/MCM-41 catalysts give higher yields of liquid hydrocarbons than other catalysts at a given conversion. Types of hydrocarbon in liquid products,identified by simulated distillation gas chromatography-flame ionization detector( SimDis GC-FID),are gasoline( 150-200 ℃; C5-12),kerosene( 250-300 ℃; C5-20) and diesel( 350 ℃; C7-20).Moreover,the conversion of CPO to biofuel products using the NiMo-and NiW-ZSM-5/MCM-41 catalysts offers no statistically significant difference( P 0.05) at 95% confidence level,evaluated by SPSS analysis.     

喹吖啶酮衍生物/介孔分子筛MCM-41组装体的金属离子传感性能研究

将5,12-二［6-(2-氨基乙基氨基)己基］ 喹吖啶酮(BAEAHQA)组装到介孔分子筛MCM-41的孔道中,制备了金属离子传感材料BEDAHQA /MCM-41. 荧光光谱显示组装体的发光避免了喹吖啶酮固体发光的浓度猝灭现象. 引入不同的金属离子将使BAEAHQA/MCM-41的荧光光谱强度发生不同程度的降低和峰位移动. 尤其是金属钴离子可以使BAEAHQA/MCM-41的发光产生明显的猝灭,猝灭程度可达到92.63％. 通过引入乙二氨基团BAEAHQA达到了发光基团与螯合基团之间的分离,有效地避免了pH值对发光的影响. 实验结果表明,BAEAHQA/MCM-41对于金属离子具有良好的传感特性.     

TiO2修饰MCM-41的结构表征及光催化苯酚降解活性

 以钛酸丁酯为前驱体,合成了呈单层和双层分散状态的TiO2修饰的介孔分子筛MCM－41．用XRD,液氮温度下N2吸附－脱附曲线,FT－IR和固体UV－Vis漫反射等手段对其结构特征和氧化钛分散状态进行了表征．以苯酚降解为模型反应,考察了具有光催化活性的TiO2修饰的MCM－41的光催化活性．     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

Enhanced electrorheology of conducting polyaniline confined in MCM-41 channels

A composite material of a silica-based mesoporous molecular sieve, MCM-41, with conducting polyaniline (PANI) inside the uniformly aligned one-dimensional channels (PANI/MCM-41) was prepared and its nanocomposite formation was confirmed through an electrical conductivity measurement. This nanocomposite particle was adopted for a dispersed phase in electrorheological (ER) fluids, and the ER property was measured using a Couette-type rotational rheometer equipped with a high voltage generator. Suspension of PANI/MCM-41 showed ER properties more enhanced than those of MCM-41 or PANI alone as a result of the anisotropic polarization of the PANI/MCM-41 nanocomposite.     

Hβ/MCM-41复合分子筛催化剂上苯甲醚与乙酸酐酰化反应研究

以β沸石为硅源,制备了不同硅铝比的Hβ/MCM-41复合分子筛,考察了该复合分子筛对苯甲醚与乙酸酐酰化反应的催化效果,并与介孔MCM-41、微孔Hβ分子筛的催化效果进行了比较,研究了分子筛硅铝比、酸性及孔道结构对酰化反应催化性能的影响。结果表明,对于苯甲醚和乙酸酐酰化反应,Hβ/MCM-41复合分子筛具有较好的催化稳定性,反应过程中的积炭量较少,积炭的碳氢比较低。该复合分子筛不仅具有微孔沸石的强酸性,而且具有较大孔径的介孔,产物分子能及时从孔道中扩散出来,催化活性位不易中毒失活。     

过渡金属改性MCM-41的结构及对苯催化氧化的研究

制备了Ti,Fe,Cr,Ni改性的MCM-41,采用XRD、低温N₂吸附及TPD手段研究了改性MCM-41的结构特征和表面性质.过渡金属可同品取代骨架Si,同品取代的能力与过渡金属离子半径有关.过渡金属改性MCM-41均具有较好的长程有序结构、均一的孔径分布和较高的比表面积.引入不同的过渡金属可以改变MCM-41表面酸性和亲水/憎水性.考察了改性MCM-41对苯氧化的催化性能.     

Cerium modified MCM-41 nanocomposite materials via a nonhydrothermal direct method at room temperature

Ce-containing MCM-41 materials were prepared via a direct, nonhydrothermal method at room temperature from tetra-ethoxysilane, n-hexadecyl trimethyl ammonium bromide, ammonia solution, and cerium(IV) ammonium nitrate precursors. Composite materials containing the nominated ratios of 5 and 10% (w/w) CeO2/MCM-41 were targeted. The obtained materials were investigated by TGA, DSC, FTIR, diffuse reflectance UV-vis, XRD, N2 adsorption/desorption isotherms, and SEM. Results indicated the insertion of cerium ions in tetrahedral environment in the framework of MCM-41. BET surface area amounting to 824 and 726 m2/g; total pore volume amounting to 0.427 and 0.515 cm3/g; and narrow pore size distribution maximizing at 22.5 and 23.7 A, respectively were obtained for the 5 and 10% CeO2/MCM-41 calcined composites. SEM showed a spherical type morphology for the composites which is rather similar to their blank MCM-41, and no clear ceria aggregates were observed on the external surfaces of composites spherical particles. Thus, the adopted method allows the persistence of MCM-41 texture with cerium inserts in the framework of MCM-41 and/or forms finely divided ceria nanoparticles on the wall of MCM-41 materials. Moreover, stabilization of any formed ceria nanoparticles was attributed to the short nonintersecting porous nature of MCM-41 matrix, which hinders their aggregation upon calcinations.