Fabrication of polymer‐modified magnetic nanoparticle based adsorbents for the capture and release of quinolones by manipulating the metal–coordination interaction

Functional polymers with a metal–coordination interaction have been fabricated for sample pretreatment. Poly(N‐4‐vinyl‐benzyl iminodiacetic acid‐co‐methacrylic acid‐co‐styrene)‐modified magnetic nanoparticles were prepared and used as solid‐phase extraction adsorbents for the analysis of quinolones by tuning the metal–coordination interaction. In the construction of the polymer‐based adsorbents, functional monomer (N‐(4‐vinyl)‐benzyl iminodiacetic acid) and comonomers (methacrylic acid and styrene) were fabricated onto the magnetic nanoparticles by free radical polymerization. Factors affecting the performance of the adsorbents were investigated, and the results revealed that Fe³⁺ played a vital role in the formation of metal–coordination adsorbents. Compared with other compounds, the resultant adsorbents displayed good selectivity to quinolones due to the metal–coordination complex (N‐4‐vinyl‐benzyl iminodiacetic acid‐Fe³⁺‐quinolones). Interestingly, the captured quinolones could be rapidly released by manipulating the metal–coordination interaction with Cu²⁺. The linearity range for analysis of the test quinolones was 0.025–2.0 μg/mL (R² > 0.999), and the recovery varied from 80.0 to 100.7%. Further, the proposed adsorbents were combined with high‐performance liquid chromatography for the analysis of quinolones in real urine samples. The results demonstrated that the prepared adsorbents have good selectivity and sensitivity for quinolones, showing great potential for drug analysis in real samples.     

Effect of annealing temperatures and of high content of the iron ion (Fe<Superscript>3+</Superscript>)-doping on transition anatase–rutile phase of nanocrystalline TiO<Subscript>2</Subscript> thin films prepared by sol–gel spin coating

Titanium dioxide doped with iron (III) was prepared by sol–gel Spin Coating method. The phase structures, morphologies, particle size of the doped TiO₂ have been characterized by X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and ultraviolet–visible (UV–Vis) spectrophotometer. The XRD and Raman results show that the 10% Fe³⁺-doped TiO₂ thin films crystallize in anatase phase between 600 and 800 °C, and into the anatase–rutile phase at 1,000 °C, and further into the rutile phase when the content of Fe³⁺ increases (20%). The grain size calculated from XRD patterns shows that the crystallinity of the obtained anatase particles increased from 39.4 to 43.4 nm as the temperature of annealing increase, whereas the size of rutile crystallites increases, with increasing Fe³⁺ concentrations from 36.9 to 38.1 nm. The AFM surface morphology results confirmed that the particle size increases by increasing the annealing temperature and also with an increasing of Fe³⁺ content. The optical band gap (E _g) of the films was determined by the UV–Vis spectrophotometer. We have found that the optical band gap decreased with an increasing of annealing temperatures and also with an increasing of Fe³⁺ content.     

Solid phase immunoradiometric assay for CA125 antigen levels in blood using monoclonal antibodies

We have developed a simple one step ‘sandwich’ immunoradiometric assay for CA125 using monoclonal antibodies directed against two different epitopes of the antigen. The detection antibody was radiolabeled with I-125 and the selected capture antibody was chemically coupled to magnetizable cellulose to form immobilized solid support. In the developed inclusive assay procedure, 200 μL of standard or sample was incubated with 100 μL of radiolabeled and capture antibody suspension for 18 h at room temperature with shaking. At the end of the incubation, the sandwich complex attached to solid phase is separated and counted for associated radioactivity. The analytical sensitivity for the developed assay procedure was observed to be 3.0 U/mL with an assay range up to 500 U/mL of CA125. The developed assay displayed acceptable precision; expressed in terms of percentage Coefficient of Variation (CV) estimated by repeated analyses of the quality control samples. Intra-assay CV was observed to be less than 5% whereas inter-assay CV was also less than 6%. The analytical recovery of the developed assay observed to be in the range of 88–107%. The clinical samples analyzed by the developed procedure showed a good correlation with that of a commercial kit (r = 0.99; y = 1.0052x − 38.942).     

Strain correlated effect on structural,magnetic, and dielectric properties in Ti4+ substituted Bi0.8Ba0.2Fe1−xTixO3

Ti⁴⁺ substituted Bi_0.8Ba_0.2Fe_1−xTi_xO₃ for x = 0.0, 0.1 and 0.2 are prepared by modified solid state reaction method. The prepared samples sintered at 850 °C for 1 h show a single phase nature. A structural change was observed on Ti⁴⁺ substitutions are confirmed through X-ray Diffraction, Fourier Transform Infrared spectroscopy and Raman spectra. An anomalous phase transition is observed in Bi_0.8Ba_0.2FeO₃ at 1173 K. The absence of ferroelectric transition and enhancement of decomposition temperature is observed in the substituted samples from the thermal analysis. A dielectric spectroscopic measurement shows that on Ti⁴⁺ substitutions, the magnitude of dielectric constant and loss tangent (tan δ) value is decreased. Vibrating Sample Magnetometer (VSM) study shows both antiferromagnetic and ferromagnetic phases coexist in the M−H curve. On Ti⁴⁺ substitutions in Bi_0.8Ba_0.2FeO₃, the antiferromagnetism dominates over the ferromagnetic phase. In corroboration to magnetisation process, ZFC–FC measurement confirms it that on Ti⁴⁺ substitution, the antiferromagnetic behaviour gets dominated. The report suggests that the interplay of strain upon Ti⁴⁺ substitution causes the structural and magnetic phase transition.     

Fe3O4 nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin for magnetic solid‐phase extraction of carbaryl and carbofuran

In this study, porous sandwich structure Fe₃O₄ nanoparticles coated by polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were prepared by surface polymerization and were used as the magnetic solid phase extraction adsorbent for the extraction and determination of carbaryl and carbofuran. The Fe₃O₄ nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, and scanning electron microscopy. After optimizing the extraction conditions, a method that combined magnetic solid phase extraction with high‐performance liquid chromatography was developed for the determination of carbaryl and carbofuran in apple. The method exhibited a good linearity in the range of 2–400 μg/kg for carbaryl and carbofuran (R² = 0.9995), respectively. The limits of detection were 0.5 μg/kg of carbaryl and 0.7 μg/kg for carbofuran in apple, respectively. Extraction recoveries ranged from 94.2 to 103.1% with the preconcentration factor of 300 and the relative standard deviations were less than 5.9%. These results indicated that the method combined magnetic solid phase extraction with high‐performance liquid chromatography and was promising for the determination of carbaryl and carbofuran at trace amounts.     

Electrical properties and initial permeability of Cu–Mg ferrites

A series of polycrystalline spinel ferrites with composition Cu_1−xMg_xFe₂O₄ where 0.0 ≤ x ≤ 1 are prepared by the standard ceramic method. The single-phase cubic spinel structure of all the samples has been confirmed from X-ray diffraction analysis. The lattice constant increases linearly with increasing magnesium content obeying Vegard's law. The electrical properties (ɛ′, and σ) of the prepared samples are measured at different temperatures as a function of applied frequency ranging from 100 kHz up to 5 MHz. The general trend of ɛ′, and σ is decreased with increasing Mg²⁺ and increases with increasing temperature. The observed variation of dielectric properties is explained on the basis of Cu²⁺/Cu¹⁺ ionic concentration as well as the electronic hopping frequency between Fe²⁺ and Fe³⁺ ions in the present samples. The data of initial permeability is also discussed.     

Separation and indirect ultraviolet detection of ferrous and trivalent iron ions by using ionic liquids in ion chromatography

A method of simultaneous separation and indirect ultraviolet detection of different valence iron ions Fe²⁺ and Fe³⁺ by using ionic liquids as mobile phase additives and ultraviolet absorption reagents on a cation exchange column functionalized with carboxylic acid group was developed. The effects of ionic liquids, organic acids, detection wavelength, etc. on separation and detection of Fe²⁺ and Fe³⁺ were investigated and the mechanism was discussed. The pyridinium and imidazolium ionic liquids were not only ultraviolet absorption reagents of indirect ultraviolet detection but also effective components for separating Fe²⁺ and Fe³⁺. The separation and detection of Fe²⁺ and Fe³⁺ can be achieved using 0.5 mmol/L pyridinium ionic liquid?1.2 mmol/L methanesulfonic acid as the mobile phase. The determination of Fe²⁺ and Fe³⁺ had a good linear relationship in the concentration range of 1?100 mg/L. The limits of detection of Fe²⁺ and Fe³⁺ were 0.12 and 0.09 mg/L, respectively. This method was applied to the actual sample detection in the field of medical analysis. The spiked recoveries were between 97.3 and 99.5%, and the relative standard deviations were less than 0.6%. The method is simple, accurate, and reliable, and is an analytical method with universal and practical value.     

Reinvestigation of the Fe-rich part of the pseudo-binary system SrO–Fe2O3

The phase relations in the Fe-rich part of the pseudo-binary system SrO–Fe₂O₃ (>33 mol% Fe₂O₃) were reinvestigated between 800 and 1500 °C in air. A combination of microscopy, electron probe micro-analysis, powder X-ray diffraction and thermal analysis was used to determine phase relations, crystal structure parameters and phase transition temperatures. M-type hexagonal ferrite SrFe₁₂O₁₉ (85.71 mol% Fe₂O₃) is stable up to 1410 °C. No indication of a significant phase width was found; Sr₄Fe₆O_13±δ appears as a second phase in compositions with <85.71±0.2 mol% Fe₂O₃. Sr₄Fe₆O_13±δ itself is stable between 800 and 1250 °C. Two other hexagonal ferrites were found to exist at high temperatures only: W-type SrFe²⁺₂Fe³⁺₁₆O₂₇ is stable between 1350 and 1440 °C and X-type ferrite Sr₂Fe²⁺₂Fe³⁺₂₈O₄₆ between 1350 and 1420 °C, respectively, which is shown here for the first time. These findings in combination with previously published data were used to derive a corrected phase diagram of the Fe-rich part of the pseudo-binary system SrO–Fe₂O₃.     

Solid phase radioimmunoassay for testosterone in human serum using antibodies coupled to magnetizable cellulose

Summary A simple user-friendly, solid phase radioimmunoassay for testosterone in human serum based on magnetic particles is described. IgG fractions precipitated from polyclonal testosterone antiserum were coupled to magnetizable cellulose particles using carbonyl diimidazole. The prepared antibody solid phase was stable for one year when stored at 4 °C. The optimized assay involves the incubation of 50 ml of testosterone standards (0.3-10 ng/ml), 100 ml of magnetizable cellulose particle coupled antibody suspension and 100 ml of ¹²⁵I-testosterone derivative for 4 hours at 37 °C. At the end of the incubation, the tubes were placed on a magnetic rack for 10 minutes after the addition of wash buffer and decanted. The sensitivity of the assay is 0.2 ng/ml. The intra-assay variation was <15% throughout the assay range. The recovery varied from 88 to 115%. On dilution of samples having high levels of testosterone, linearity ranged between 87 and 125%. Correlation coefficient of 0.978 was obtained when the developed solid phase assay was compared to the earlier established liquid phase assay.     

Magnetic molecularly imprinted composite for the selective solid‐phase extraction of p‐aminosalicylic acid followed by high‐performance liquid chromatography with ultraviolet detection

A new method for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples has been developed using magnetic molecularly imprinted polymer nanoparticles before determination by high‐performance liquid chromatography. The Fe₃O₄ nanoparticles were first prepared through the chemical coprecipitation of Fe²⁺ and Fe³⁺ and then coated with a vinyl shell. Subsequently, a layer of molecularly imprinted polymers was grafted onto the vinyl‐modified magnetic nanoparticles by precipitation polymerization. FTIR spectroscopy, scanning electron microscopy, vibrating sample magnetometry, and thermogravimetric analysis were applied to characterize the sorbent properties. Moreover, the predominant parameters affecting the magnetic solid phase extraction such as sample pH, sorption and elution times, the amount of sorbent, and composition and volume of eluent were investigated thoroughly. The maximum sorption capacity of the imprinted polymer toward p‐aminosalicylic acid was 70.9 mg/g, which is 4.5 times higher than that of the magnetic nonimprinted polymer. The magnetic molecularly imprinted polymer nanoparticles were applied for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples and satisfactory results were achieved. The results illustrate that magnetic molecularly imprinted polymer nanoparticles have a great potential in the extraction of p‐aminosalicylic acid from environmental and biological matrices.     

Solid phase inclusive immunoradiometric assay for human chorionic gonadotropin using monoclonal antibodies

Summary A simple, one step, inclusive immunoradiometric assay for human chorionic gonadotropin (hCG) employing monoclonal antibodies is described. Commercially available monoclonal antibodies from various commercial sources were screened. Identified “detection” antibody was radiolabeled with ¹²⁵I and the selected “capture” antibody was chemically coupled to magnetizable cellulose to form a solid phase. In the procedure developed, standard/sample, radiolabeled antibody and capture antibody were incubated together for 3 hours at room temperature with shaking. After incubation, the bound complex was quantitated for the associated radioactivity. The analytical sensitivity observed was 1.0 mIU/ml with a wide concentration range up to 1000 mIU/ml of hCG. “High dose hook” of the developed assay was observed beyond 2000 mIU/ml. Results showed that the developed assay had a good precision: intra-assay CV less than 8%, inter-assay CV less than 10% and good analytical recovery of 97-109%. The clinical samples analyzed by the developed procedure showed a good correlation with that of the commercial kit (r = 0.92; y = 0.99x+0.51).     

Aptamer‐functionalized Fe3O4 magnetic nanoparticles as a solid‐phase extraction adsorbent for the selective extraction of berberine from Cortex phellodendri

The extraction adsorbent was fabricated by immobilizing the highly specific recognition and binding of aptamer onto the surface of Fe₃O₄ magnetic nanoparticles, which not only acted as recognition elements to recognize and capture the target molecule berberine from the extract of Cortex phellodendri , but also could favor the rapid separation and purification of the bound berberine by using an external magnet. The developed solid‐phase extraction method in this work was useful for the selective extraction and determination of berberine in Cortex phellodendri extracts. Various conditions such as the amount of aptamer‐functionalized Fe₃O₄ magnetic nanoparticles, extraction time, temperature, pH value, Mg²⁺ concentration, elution time and solvent were optimized for the solid‐phase extraction of berberine. Under optimal conditions, the purity of berberine extracted from Cortex phellodendri was as high as 98.7% compared with that of 4.85% in the extract, indicating that aptamer‐functionalized Fe₃O₄ magnetic nanoparticles‐based solid‐phase extraction method was very effective for berberine enrichment and separation from a complex herb extract. The applicability and reliability of the developed solid‐phase extraction method were demonstrated by separating berberine from nine different concentrations of one Cortex phellodendri extract. The relative recoveries of the spiked solutions of all the samples were between 95.4 and 111.3%, with relative standard deviations ranging between 0.57 and 1.85%.     

Application of mercapto‐silica polymerized high internal phase emulsions for the solid‐phase extraction and preconcentration of trace lead(II)

A new class of solid‐phase extraction column prepared with grafted mercapto‐silica polymerized high internal phase emulsion particles was used for the preconcentration of trace lead. First, mercapto‐silica polymerized high internal phase emulsion particles were synthesized by using high internal phase emulsion polymerization and carefully assembled in a polyethylene syringe column. The influences of various parameters including adsorption pH value, adsorption and desorption solvents, flow rate of the adsorption and desorption procedure were optimized, respectively, and the suitable uploading sample volumes, adsorption capacity, and reusability of solid phase extraction column were also investigated. Under the optimum conditions, Pb²⁺ could be preconcentrated quantitatively over a wide pH range (2.0–5.0). In the presence of foreign ions, such as Na⁺, K⁺, Ca²⁺, Zn²⁺, Mg²⁺, Cu²⁺, Fe²⁺, Cd²⁺, Cl^? and NO₃^?, Pb²⁺ could be recovered successfully. The prepared solid‐phase extraction column performed with high stability and desirable durability, which allowed more than 100 replicate extractions without measurable changes of performance. The feasibility of the developed method was further validated by the extraction of Pb²⁺ in rice samples. At three spiked levels of 40.0, 200 and 800 μg/kg, the average recoveries for Pb²⁺ in rice samples ranged from 87.3 to 105.2%.     

UV-absorption and radiation effects in different glasses doped with iron and tin in the ppm range

Intrinsic and extrinsic ultraviolet absorption and radiation-induced effects were investigated in different glass types, fluorides, phosphates and borosilicates. High-purity glass samples were prepared and their intrinsic absorption was measured in the vacuum ultraviolet region. The influence of doped iron and tin species in the ppm range on the ultraviolet absorption and radiation-induced effects were studied. The maximum of the dominating Fe³⁺ charge transfer band has the lowest energy (4.8 eV) and intensity in the fluoride glass and the highest energy (5.6 eV) and intensity in the borosilicate glass samples. The charge-transfer band for Fe²⁺ has much lower intensity and higher energy (∼5.7 eV) than those for Fe³⁺ in all glasses investigated. Photo-oxidation of Fe²⁺ to (Fe²⁺)⁺ hole centres and glass-matrix-related electron centres by UV irradiation increases the UV absorption drastically in all glasses. The kinetics was measured and simulated depending on the glass matrix. In fluoride and phosphate glasses, Fe³⁺ complexes are very stable against UV irradiation and do not participate in UV-radiation-induced processes. Only in silicate glasses, Fe³⁺ is able to form a (Fe³⁺)^– electron centre defect which decreases the charge transfer absorption of Fe³⁺ near 220 nm, but increase the absorption of hole centre defects, with a maximum at 280 nm. So, the defect generation in the ultraviolet region increases drastically with increasing Fe content in the range 10–200 ppm. Three or four electronic s → p transitions for Sn²⁺ were detected by optical absorption and luminescence spectroscopy shifted to longer wavelength in the range fluoride → phosphate → silicate glass samples. Sn⁴⁺ absorption bands were found at shorter wavelength in the vacuum ultraviolet region in all cases investigated. Sn²⁺ ions are photo-oxidised under UV radiation very fast, which leads to an decrease of absorption near 200 nm and to an increase near 250 nm. Both Sn²⁺ and Sn⁴⁺ are involved in the radiation-induced processes. In contrast to phosphate and silicate glasses, tin-doped fluoride glasses are very resistant against UV lamp but not against UV laser irradiation. The mechanisms are very complicated, with maximums and minimums in the defect formation curves.     

Rapid determination of antiviral medication ribavirin in different feedstuffs using a novel magnetic molecularly imprinted polymer coupled with high‐performance liquid chromatography

A novel magnetic molecularly imprinted polymer adsorbing material was successfully synthesized to detect ribavirin in animal feedstuff. Molecularly imprinted polymer was prepared through surface polymerization by using ribavirin as template molecule, methyl methacrylate, and γ‐methacryloxypropyl trimethoxy silane functionalized magnetic mesoporous silica as bifunctional monomers, and ethylene diglycidyl ether as crosslinking agent. The prepared magnetic molecularly imprinted polymer was characterized by scanning electron microscopy and infrared spectroscopy. Static and dynamic adsorption experiments and selective adsorption analysis were performed to evaluate the adsorption and selectivity of magnetic molecularly imprinted polymer. Different experiments were conducted to optimize the magnetic solid‐phase extraction conditions. Under optimal experimental conditions, a magnetic molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography method was successfully developed for ribavirin detection. The established method achieved a satisfactory linear range of 0.20–50 mg/L (R² > 0.99) and a low detection limit (0.081 mg/kg). An average recovery of 92–105% with relative standard deviation of <6.5% was obtained upon the application of the developed method to detect ribavirin in real feedstuff samples. Thus, established method can be used for the rapid and simple separation and detection of added ribavirin in feedstuff.     

Application of zein‐modified magnetite nanoparticles in dispersive magnetic micro‐solid‐phase extraction of synthetic food dyes in foodstuffs

A simple method for the simultaneous and trace analysis of four synthetic food azo dyes including carmoisine, ponceau 4R, sunset yellow, and allura red from some foodstuff samples was developed by combining dispersive μ‐solid‐phase extraction and high‐performance liquid chromatography with diode array detection. Zein‐modified magnetic Fe₃O₄ nanoparticles were prepared and used for μ‐solid‐phase extraction of trace amounts of mentioned food dyes. The prepared modified magnetic nanoparticles were characterized by scanning electron microscopy and FTIR spectroscopy. The factors affecting the extraction of the target analytes such as pH, amount of sorbent, extraction time, type and volume of the desorption eluent, and desorption time were investigated. Under the optimized conditions, the method provided good repeatability with relative standard deviations lower than 5.8% (n = 9). Limit of detection values ranged between 0.3 and 0.9 ng/mL with relatively high enrichment factors (224–441). Comparing the obtained results indicated that Fe₃O₄ nanoparticles modified by zein biopolymer show better analytical application than bare magnetic nanoparticles. The proposed method was also applied for the determination of target synthetic food dyes in foodstuff samples such as carbonated beverage, snack, and candy samples.     

Coating of optical fiber with a smart thermosensitive polymer for the separation of phthalate esters by solid‐phase microextraction

A solid‐phase microextraction fiber was prepared by coating an optical fiber with a temperature‐sensitive polymer to determine phthalate esters. N‐Isopropylacrylamide and N,N′‐methylenebisacrylamide were used as the monomer and the cross linker, respectively. The fabricated fiber was characterized by FTIR spectroscopy, thermogravimetric analysis, and scanning electron microscopy. During extraction, important factors such as extraction time, pH, temperature, and ionic strength were optimized. The fabricated fiber, which is firm, inexpensive, stable, and efficient, is a vital material used in solid‐phase microextraction. Under optimum conditions, the calibration curve was linear and in the range of 1–20 μg/L (r² = 0.9747). The high extraction efficiency was obtained for phthalates with a detection limit of 0.12 μg/L. The fabricated fiber was successfully applied to the solid‐phase micro extraction of phthalates from water samples after its extraction, followed by gas chromatography with flame ionization detection.     

Magnetic solid‐phase extraction of benzoylurea insecticides in tea samples with Fe3O4‐hyperbranched polyester magnetic composite as sorbent

In this work, a method for the analysis of benzoylurea insecticides, including hexaflumuron, flufenoxuron, lufenuron and chlorfluazuron, in tea samples by high‐performance liquid chromatography with Fe₃O₄‐hyperbranched polyester nanocomposite as the adsorbent for magnetic solid‐phase extraction was developed. The magnetic nanocomposite was prepared and characterized by infrared spectroscopy, vibrating sample magnetometry, and scanning electron microscopy. The as‐prepared nanocomposite was used as a sorbent for the extraction and preconcentration of pesticide residues in tea samples. The extraction and desorption conditions, including mass ratios of raw materials, amount of sorbent, pH value, extraction time, and desorption time, were investigated. Under the final conditions chosen for the analysis, good linearity was obtained for all the tested compounds, with R² values of at least 0.9979. The limits of detection were determined in the range of 0.15–0.3 μg/L. The recovery obtained from the analysis of tea samples with various spiked concentrations was between 90.7 and 98.4%, with relative standard deviations (n = 4) lower than 4.1%. Furthermore, the present approach was successfully applied to the quantitative determination of residues of benzoylurea insecticides in real samples.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

Kinetics of oxidation of iron(II) ions with lipid hydroperoxides

One of the pathways for excessive production of free radicals is the decomposition of lipid hydroperoxides catalyzed by iron. A number of hydroperoxides of unsaturated fatty acids (LOOH), some prepared in our laboratory and others extracted from biological materials, were used to determine the rate constants of Fe²⁺ oxidation by measuring the formation rate of Fe³⁺ ions in the presence of simple unidentate ligands, chloride, and thiocyanate as the [FeCl]²⁺ and [FeNCS]²⁺ complexes, in a deoxygenated dichloromethane:methanol (2:1, v/v) mixture. The rates of Fe²⁺ oxidation with prepared LOOHs via the [FeNCS]²⁺ complex were approximately the same-the average second-order reaction rate constant was 1390 ± 340 dm³ mol⁻¹ s⁻¹; the rate constants of LOOHs from different biological materials were in the same range. The rates measured as the [FeNCS]²⁺ complex were somewhat higher than the rates measured as the [FeCl]²⁺ complex, indicating that ligands could interact in the transition state, thus affecting the disruption of the intermediate complex. Since there were no significant differences in the activation thermodynamic parameters for reactions within the reaction series of studied hydroperoxides, it was assumed that the oxidation proceeded by an inner sphere mechanism, considering that the breakdown of the successor inner sphere complex with the homolytic cleavage of peroxide bonds of hydroperoxides forming reactive alkoxyl radicals was the rate-limiting step. Based on this research, an indirect spectrophotometric method for quantitative determination of LOOH was reestimated. The microprocedure proposed for the lipid hydroperoxide assay could be applied to follow the early stages of lipid peroxidation processes in real biological samples.