Thermal behaviour of the thermotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) under hydrostatic pressure

The phase behaviour of 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was investigated under hydrostatic pressures up to 200 MPa using high pressure differential thermal analysis. The phase transition sequence crystal 4 (Cr4)-crystal 3 (Cr3)-crystal 2 (Cr₂)-crystal 1 (Cr₁)-smectic C (SmC)-Cubic (Cub)-smectic A (SmA)-'structured liquid' (I₁)-isotropic liquid (I₂) was observed for a virgin sample on heating at atmospheric pressure. The stable temperature region of the optically isotropic cubic phase becomes narrower on increasing pressure and disappears at pressures above 65 MPa. The T vs. P phase diagram exhibits the existence of a triple point (65 MPa, 207.6°C) for the cubic phase, a new mesophase (X), and the SmA phase, indicating the upper limit for the cubic phase. The new mesophase, denoted here as X, appears in place of the cubic phase at pressures above 65 MPa. The phase diagram also indicates that the Cr₄-Cr₃, Cr₃-Cr₂, and Cr₂-Cr₁ transition lines merge at about 40-50 MPa and then only the Cr₄-Cr₁ transition is observed in the solid state at higher pressures. Thus the phase transition process on heating changes from the sequence Cr₄-Cr₃-Cr₂-Cr₁-SmC-Cub-SmA-I₁-I₂ at atmospheric pressure to Cr₄-Cr₁-SmC-X-SmA-I₁-I₂ in the high pressure region above 65 MPa, via Cr₄-Cr₃-Cr₂-Cr₁-SmC-(X)-Cub-SmA-I₁-I₂ in the low pressure region.     

Thermal behaviour of the thermotropic cubic mesogen 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) under hydrostatic pressure

The phase behaviour of 4'-n-hexadecyloxy-3'-nitrobiphenyl-4-carboxylic acid (ANBC-16) was investigated under hydrostatic pressures up to 200 MPa using high pressure differential thermal analysis. The phase transition sequence crystal 4 (Cr4)-crystal 3 (Cr3)-crystal 2 (Cr₂)-crystal 1 (Cr₁)-smectic C (SmC)-Cubic (Cub)-smectic A (SmA)-'structured liquid' (I₁)-isotropic liquid (I₂) was observed for a virgin sample on heating at atmospheric pressure. The stable temperature region of the optically isotropic cubic phase becomes narrower on increasing pressure and disappears at pressures above 65 MPa. The T vs. P phase diagram exhibits the existence of a triple point (65 MPa, 207.6°C) for the cubic phase, a new mesophase (X), and the SmA phase, indicating the upper limit for the cubic phase. The new mesophase, denoted here as X, appears in place of the cubic phase at pressures above 65 MPa. The phase diagram also indicates that the Cr₄-Cr₃, Cr₃-Cr₂, and Cr₂-Cr₁ transition lines merge at about 40-50 MPa and then only the Cr₄-Cr₁ transition is observed in the solid state at higher pressures. Thus the phase transition process on heating changes from the sequence Cr₄-Cr₃-Cr₂-Cr₁-SmC-Cub-SmA-I₁-I₂ at atmospheric pressure to Cr₄-Cr₁-SmC-X-SmA-I₁-I₂ in the high pressure region above 65 MPa, via Cr₄-Cr₃-Cr₂-Cr₁-SmC-(X)-Cub-SmA-I₁-I₂ in the low pressure region.     

Inversion of the phase sequence between the cubic and smectic C phases under pressure

The phase behaviour of a thermotropic cubic mesogen of 1,2-bis(4′-n-tetradecyloxybenzoyl)hydrazine BABH-14 was studied under hydrostatic pressure using a polarising optical microscope equipped with a high-pressure optical cell, and the P–T phase diagram was constructed. BABH-14 shows the Cr–Cub–I transition sequence under atmospheric and lower pressures, but the Cub phase is replaced completely by the high-pressure SmC, SmC(hp), phase under higher pressures. There is a narrow intermediate-pressure region between the low- and high-pressure regions, in which the Cr–SmC(hp)–Cub–I phase sequence is recognised. The SmC(hp)–Cub transition line has a positive slope with pressure and there are two triple points: one is for the Cr, Cub and SmC(hp) phases and the other is for the I, Cub and SmC(hp) phases. Comparing the phase sequence of BABH-14 with those for BABH-8 and -10, the pressure-induced inversion of the phase sequence between the cubic and SmC phases occurs in the BABH-n homologous compounds. Another new phenomenon is the formation of the monotropic cubic phase on cooling in the intermediate- and high-pressure regions, and an intriguing phenomenon of the cubic phase appearing twice, i.e. I–Cub–SmC(hp)– Cub–Cr phase transition, occurs in the intermediate-pressure region.