离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.     

表面活性剂阴离子双水相新体系及其对卟啉、染料的萃取

由阴阳离子型表面活性剂水溶液混合形成的双水相［１,２］是水相分离技术中的一个新分支．ＺＨＡＯ等［２］将阴阳离子表面活性剂过量的体系分别称为阴阳离子双水相．由溴化十二烷基三乙铵（Ｃ１２ＮＥ）和十二烷基硫酸钠（ＳＤＳ）组成的阳离子双水相对蛋白质［１］、酶［３］、氨基酸［４］和卟啉［５,６］等的萃取分离已有报道．与阳离子双水相比较,阴离子双水相分相时间慢,其萃取应用研究尚未见报道．本文在详细研究了ＳＤＳ－Ｃ１２ＮＥ阴离子双水相的基础上,将全氟型阴离子表面活性剂全氟辛酸钠（ＳＰＦＯ）引入这类水相分离体系…     

表面活性剂双水相的性质及其应用 Ⅱ: 表面活性剂双水相在生物活性物质中的应用

测定了胰蛋白酶在表面活性剂双水相中的分配比,检测了分配在双水相中酶的活力及构象变化,并与阴离子表面活性剂十二烷基硫酸钠(SDS)、阳离子表面活性剂溴化十二烷基三乙铵(C_(12)NE)对酶活性及构象的影响进行了对照,结果表明,SDS对蛋白质的变性明显强于C_(12)NE.阳离子表面活性剂过量的双水相体系,简称阳离子双水相,其中的SDS与C_(12)NE由于库仑引力和疏水相互作用力,使得SDS较难被胰蛋白酶吸附,胰蛋白酶在阳离子双水相中的活性没有丧失.其构象亦未发生显著变化.     

表面活性剂双水相的性质及其应用 Ⅱ: 表面活性剂双水相在生物活性物质中的应用

测定了胰蛋白酶在表面活性剂双水相中的分配比, 检测了分配在双水相中酶的活力及构象变化, 并与阴离子表面活性剂十二烷基硫酸钠(SDS)、阳离子表面活性剂溴化十二烷基三乙铵(C12NE)对酶活性及构象的影响进行了对照。结果表明, SDS对蛋白质的变性明显强于C12NE。阳离子表面活性剂过量的双水相体系, 简称阳离子双水相, 其中的SDS与C12NE由于库仑引力和疏水相互作用力,便得SDS较难被胰蛋白酶吸附, 胰蛋白酶在阳离子双水相中的活性没有丧失。其构象亦未发生显著变化。     

表面胶团修饰电极电化学测定双酚A的增敏机理及抗污性能研究

分别以2种阴离子表面活性剂(SDS、SDBS)、3种季铵盐阳离子表面活性剂(CTAB、TTAB、DTAB)和2种季铵盐型双子表面活性剂(12-3-12、12-4-12)修饰碳糊电极。通过原子力显微镜、接触角以及分析物在电极表面的电化学行为探讨了不同表面活性剂在电极表面的吸附情况,推测在浓度大于临界胶束浓度(CMC)时,季铵盐型阳离子表面活性剂CTAB、TTAB、12-3-12和12-4-12在碳糊电极表面形成了圆柱形的表面胶团,而DTAB和SDS可能是饱和单分子层吸附。以BPA为分析物,研究了表面活性剂修饰电极对BPA的电化学增敏机理,结果表明修饰电极对双酚A(BPA)的电化学增敏作用主要是因为表面胶团对BPA的增溶作用,表面活性剂和BPA间的阳离子-π作用是表面胶团增溶BPA的主要原因。     

离子液体型表面活性剂C12mimBr与普通表面活性剂混合性质的研究

研究了离子液体型表面活性剂C12mimBr与阳离子表面活性剂Gemini 12-3-12, DTAB及阴离子表面活性剂SDS复配体系的性质, 并分别采用Rubingh-Margules模型和Rubingh-正规溶液模型计算了临界胶束浓度和混合胶团组成. 研究发现, 两表面活性剂分子结构的匹配性及带电头基之间的相互作用是影响混合溶液性质的主要因素. 对于分子结构差别较大的C12mimBr与Gemini 12-3-12的混合, 其行为远远偏离理想混合性质; 对疏水链长相同仅亲水头基不同的C12mimBr与DTAB则接近于理想混合; 而对C12mimBr＋SDS的复配体系, 正、负电荷间强烈的相互吸引使得混合体系大大偏离理想行为. 计算发现, 两种理论模型得到的混合胶团组成基本一致, 但Rubingh-Margules模型预测的临界胶束浓度比Rubingh-正规溶液模型要好     

十四烷基三甲基氯化铵/十二烷基苯磺酸钠混合表面活性剂双水相体系的萃取性能

研究了十四烷基三甲基氯化铵(TTAC)与十二烷基苯磺酸钠(SDBS)混合表面活性剂水溶液双水相体系的分相情况、萃取性能及两相的微观结构.结果表明,TTAC/SDBS混合表面活性剂水溶液在30℃下能够形成稳定的双水相体系;该双水相体系对亚甲基蓝、靛红都具有一定的萃取分离作用.其上、下两相的微观结构明显不同,这是其能够形成稳定双水相体系且具有萃取作用的重要原因.     

表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系，在一定浓度及混合比范围内，可以形成两个互不相溶、平衡共存的水相，称为表面活性剂双水相．其中阳离子表面活性剂过量的双水相体系，称为阳离子双水相．本文分别以芘和罗丹明B作为探针，用荧光探针法研究了摩尔比为1：6：1的C_12NE和SDS混合体系所形成的阳离子双水相，测定其上层和下层的胶束微环境的极性和微粘度，取得了有意义的结果．     

表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系, 在一定浓度及混合比范围内, 可以形成两个互不相溶、平衡共存的水相, 称为表面活性剂双水相。其中阳离子表面活性剂过量的双水相体系, 称为阳离子双水相。本文分别以芘和罗丹明B作为探针, 用荧光探针法研究了摩尔比为1.6:1的C12NE和SDS混合体系成形成的阳离子双水相,测定其上层和下层的胶束微环境的极性和微粘度, 取得了有意义的结果。     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

Effect of the aliphatic chain length on electrical double layer formation at the liquid/vacuum interface in the [C(n)mim][BF4] ionic liquid series

Neutral impact collision ion scattering spectroscopy (NICISS) was used to determine the surface structure of three ionic liquids, 1-hexyl-3-methylimidazolium [C(6)mim], 1-octyl-3-methylimidazolium [C(8)mim], 1-decyl-3-methylimidazolium [C(10)mim] tetrafluoroborates [BF(4)]. Concentration depth profiles of the elements in an ionic liquid (IL) homologous series with a common anion were obtained. We show that separation between the oppositely charged ions is seen for all three ionic liquids, resulting in an electrical double layer formation. The surface charge shifts from more positive to more negative with increasing aliphatic chain length.     

Phase separation in mixtures of ionic liquids and water

The phase separation of ionic liquids (ILs) in water is studied by laser light scattering (LLS). For the ILs with longer alkyl chains, such as [C(8)mim]BF(4) and [C(6)mim]BF(4) (mim = methylimidazolium), macroscopic phase separation occurs in the mixture with water. LLS also reveals the coexistence of the mesoscopic phase, the size of which is in the order of 100-800 nm. In aqueous mixtures of ILs with shorter alkyl chains, such as [C(4)mim]BF(4), only the mesoscopic phase exists. The mesoscopic phase can be effectively removed by filtration through a 0.22 μm filter. However, it reforms with time and can be enhanced by lowering the temperature, thus indicating that it is controlled by thermodynamics. The degree of mesoscopic phase separation can be used to evaluate the miscibility of ILs with water. This study helps to optimize the applications of ILs in related fields, as well as the recycling of ILs in the presence of water.     

离子液体表面活性剂1-丁基-3-甲基咪唑烷基硫酸酯的合成及其在水溶液中的聚集行为

采用离子交换法,由1-丁基-3甲基咪唑氯盐（C4mimCl）和烷基硫酸钠合成了一系列无卤素的阴离子表面活性离子液体—1-丁基-3-甲基咪唑烷基硫酸酯[C4mim][CnH2n 1SO4](n=8,12,16),利用表面张力仪、稳态荧光光谱等手段考察了表面活性离子液体在水溶液表面及体相中的聚集行为,结果表明,与传统无机反离子相比,有机咪唑阳离子[C4mim] 作为反离子的离子液体型表面活性剂具有较高的表面活性,[C4mim] 产生的氢键引起的抑制分子规则排列的作用小于其促进分子有序排列的疏水作用。长烷基链的阴离子是界面膜及胶束的主要组成成分,阴离子疏水烷基碳链的增长虽然可促进胶束的形成,但却在一定程度上抑制[C4mim] 离子参与界面或胶束的形成;阴离子所带烷基链越长,越不利于阳离子[C4mim]＋参与界面膜或胶束的形成,界面膜或胶束中表面活性剂排布越松散,即界面张力越大,体系中胶束聚集数较小。     

Aggregation behavior of aqueous solutions of ionic liquids

The aggregation behavior in aqueous solutions of three ionic liquids based on the 1-alkyl-3-methylimidazolium cation has been investigated by means of surface tension, conductivity, and small-angle neutron scattering (SANS) measurements. From analysis of the SANS data, models for the shapes and sizes of aggregates have been proposed: the short-chain 1-butyl-3-methylimidazolium tetrafluoroborate [C4mim] [BF4] system can be best modeled by treating it as a dispersion of polydisperse spherical aggregates that form above a critical aggregation concentration, whereas the 1-octyl-3-methylimidazolium iodide, [C8mim] [I], solutions can be modeled as a system of regularly sized near-spherical charged micelles that form above a critical micelle concentration. Solutions of 1-octyl-3-methylimidazolium chloride, [C8mim]-[Cl], display weak long-range ordering of possibly disklike particles culminating in the formation of structures with distinct long-range order at higher concentrations.     

Conductivities, volumes, fluorescence, and aggregation behavior of ionic liquids [C4mim][BF4] and [C(n)mim]Br (n = 4, 6, 8, 10, 12) in aqueous solutions

Densities, conductivities, and polarity indexes of pyrene for aqueous solutions of a series of ionic liquids [C(n)mim]Br (n = 4, 6, 8, 10, 12) and [C4mim][BF4] have been determined at 298.15 K as a function of ionic liquid concentrations. It was shown that possible aggregation appeared for the ionic liquids in aqueous solutions except for [C4mim]Br. The critical aggregation concentration (CAC) of the ionic liquids, the ionization degree of aggregates (beta), the standard Gibbs energy of aggregation (Delta G(m)(o)), the limiting molar conductivity (Lambda(m)(o)), and the standard partial molar volume (V(m)(o)) for the ionic liquids were derived from the experimental data. The dependence of the CAC, Delta G(m)(o), Lambda(m)(o), and V(m)(o) on the length of the alkyl chain of the cations was examined. It was further suggested from volumetric data that a micelle was formed for [C8mim]Br, [C10mim]Br, and [C12mim]Br in aqueous solutions. Their apparent molar volumes at the critical micelle concentration (V Phi,CMC), apparent molar volumes in the micelle phase (V(Phi)(mic)), and the change of their apparent molar volume upon micellization (Delta V Phi,m) were calculated by application of the pseudophase model of micellization. In addition, the average aggregation number of [C(n)mim]Br (n = 8, 10, 12) has been determined by the steady-state fluorescence quenching technique, and predicted from a simple geometrical mode. It is found that the experimental values are in good agreement with the predicted ones.     

Comparison of physicochemical properties of new ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

More than 50 ionic liquids were prepared by using imidazolium, quaternary ammonium, and guanidinium cations and various anions. In these series, different cationic structures such as 1-benzyl-3-methylimidazolium [Bzmim]+, 1,3-dibenzylimidazolium [BzmiBz]+, 1-octyl-3-methylimidazolium [C8mim]+, 1-decyl-3-methylimidazolium [C10mim]+, tricapryl-methylammonium [Aliquat]+, benzyltriethylammonium [BzTEA]+, phenyltrimethylammonium [PhTMA]+, and dimethyldihexylguanidinium [DMG]+ were combined with anions, p-toluenesulfonate [TSA](-), dicyanoamide [DCA]-, saccharine (2-sulfobenzoic acid imide sodium salt) [SAC]-, trifluoroacetate [TFA]-, bis(trifluoromethanesulfonyl)imide [Tf2N]-, trifluoromethanesulfonate [TfO]-, and thiocyanate [SCN]-. Important physical data for these ionic liquids are collated, namely solubility in common solvents, viscosity, density, melting point and water content. Apart from the viscosity, the Newtonian and non-Newtonian behavior of these ionic liquids is also disclosed. Stability of these ionic liquids under thermal, basic, acidic, nucleophilic, and oxidative conditions was also studied. The features of the solid-liquid phase transition were analyzed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. A degradation temperature of each ionic liquid was also determined. Comparisons of the properties of various ionic liquids were made.     

Chemical potentials in aqueous solutions of some ionic liquids with the 1-ethyl-3-methylimidazolium cation

We determined the vapor pressures of aqueous solutions of 1-ethyl-3-methylimidazolium ([C 2mim])-based ionic liquids (IL) with counteranions, tetrafluoroborate (BF 4 (-)), trifluoromethanesulfonate (OTF (-)), and iodide (I (-)). Because in literature the evidence is accumulating and pointing to the fact that ionic liquid ions do not dissociate in aqueous media for the most of the concentration range, we analyzed the vapor pressure data on the basis of binary mixture, and the excess chemical potentials of each component were calculated. From these, the intermolecular interactions in terms of excess chemical potential and hence the concentration fluctuations were evaluated. Though any further discussion into the mixing schemes of the mixture awaits the excess partial molar enthalpy and hence the excess partial molar entropy data, the net interaction in terms of excess chemical potential indicates that the affinity of each IL is ranked in the descending order [C 2mim]I > [C 2mim]OTF > [C 2mim]BF 4. This is consistent with our earlier findings that [C 2mim] (+) is modestly amphiphilic with almost equal hydrophobicity and hydrophilicity, I (-) is a hydrophile, and OTF (-) is amphiphilic, and BF 4 (-) is believed to be strongly hydrophobic.     

Separation, concentration and determination of chloramphenicol in environment and food using an ionic liquid/salt aqueous two-phase flotation system coupled with high-performance liquid chromatography

Ionic liquid–salt aqueous two-phase flotation (ILATPF) is a novel, green, non-toxic and sensitive samples pretreatment technique. ILATPF coupled with high-performance liquid chromatography (HPLC) was developed for the analysis of chloramphenicol, which combines ionic liquid aqueous two-phase system (ILATPS) based on imidazolium ionic liquid (1-butyl-3-methylimidazolium chloride, [C₄mim]Cl) and inorganic salt (K₂HPO₄) with solvent sublation. In ILATPF systems, phase behaviors of the ILATPF were studied for different types of ionic liquids and salts. The sublation efficiency of chloramphenicol in [C₄mim]Cl–K₂HPO₄ ILATPF was influenced by the types of salts, concentration of K₂HPO₄ in aqueous solution, solution pH, nitrogen flow rate, sublation time and the amount of [C₄mim]Cl. Under the optimum conditions, the average sublation efficiency is up to 98.5%. The mechanism of ILATPF contains two principal processes. One is the mechanism of IL–salt ILATPS formation, the other is solvent sublation. This method was practical when applied to the analysis of chloramphenicol in lake water, feed water, milk, and honey samples with the linear range of 0.5–500 ng mL⁻¹. The method yielded limit of detection (LOD) of 0.1 ng mL⁻¹ and limit of quantification (LOQ) of 0.3 ng mL⁻¹. The recovery of CAP was 97.1–101.9% from aqueous samples of environmental and food samples by the proposed method. Compared with liquid–liquid extraction, solvent sublation and ionic liquid aqueous two-phase extraction, ILATPF can not only separate and concentrate chloramphenicol with high sublation efficiency, but also efficiently reduce the wastage of IL. This novel technique is much simpler and more environmentally friendly and is suggested to have important applications for the concentration and separation of other small biomolecules.