Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crystal structure and standard molar enthalpy of formation of ethylenediamine dilauroleate (C12H24O2)2C2N2H8(s)

The crystal structure of ethylenediamine dilauroleate was determined by X-ray crystallography. A thermochemical cycle was designed in accordance with Hess law. The enthalpy change of the synthesis reaction of ethylenediamine dilauroleate was determined to be $ \Updelta_{{\text{r}}} H_{{\text{m}}}^{\Uptheta } $ Δ r H m Θ  = ?(49.07 ± 0.11) kJ mol^?1 by an isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the title compound was calculated to be $ \Updelta_{\text{f}} H_{\text{m}}^{\Uptheta } $ Δ f H m Θ  = ?(38.78 ± 0.43) kJ mol^?1 by the designed thermochemical cycle, the enthalpies of dissolution and other auxiliary thermodynamic quantities.     

Low-temperature heat capacities and standard molar enthalpy of formation of the complex

Low-temperature heat capacities of a solid complex Zn(Val)SO₄·H₂O(s) were measured by a precision automated adiabatic calorimeter over the temperature range between 78 and 373 K. The initial dehydration temperature of the coordination compound was determined to be, T _D=327.05 K, by analysis of the heat-capacity curve. The experimental values of molar heat capacities were fitted to a polynomial equation of heat capacities (C _p,m) with the reduced temperatures (x), [x=f (T)], by least square method. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the complex relative to the standard reference temperature 298.15 K were given with the interval of 5 K. Enthalpies of dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] (Δ_sol H _m,l ⁰) and the Zn(Val)SO₄·H₂O(s) (Δ_sol H _m,2 ⁰) in 100.00 mL of 2 mol dm^–3 HCl(aq) at T=298.15 K were determined to be, Δ_sol H _m,l ⁰=(94.588±0.025) kJ mol^–1 and Δ_sol H _m,2 ⁰=–(46.118±0.055) kJ mol^–1, by means of a homemade isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as: Δ_f H _m ⁰ (Zn(Val)SO₄·H₂O(s), 298.15 K)=–(1850.97±1.92) kJ mol^–1, from the enthalpies of dissolution and other auxiliary thermodynamic data through a Hess thermochemical cycle. Furthermore, the reliability of the Hess thermochemical cycle was verified by comparing UV/Vis spectra and the refractive indexes of solution A (from dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] mixture in 2 mol dm^–3 hydrochloric acid) and solution A’ (from dissolution of the complex Zn(Val)SO₄·H₂O(s) in 2 mol dm^–3 hydrochloric acid).     

Low-temperature heat capacity and standard molar enthalpy of formation of the complex Zn(Thr)SO4·H2O (s)

Low-temperature heat capacities of the complex Zn(Thr)SO₄·H₂O (s) have been precisely measured with a small sample adiabatic calorimeter over the temperature range from 78 to 373 K. The initial dehydration temperature of the complex (T_d=325.50 K) has been obtained by analysis of the heat-capacity curve. The experimental values of molar heat capacities have been fitted to a polynomial equation by least square method. The standard molar enthalpy of formation of the complex has been determined from the enthalpies of dissolution (Δ_dH_m^Θ) of [ZnSO₄·7H₂O (s) +Thr (s)] and Zn(Thr)SO₄·H₂O (s) in 100 ml of 2 mol dm⁻³ HCl solvent as: Δ_fH_{m,Zn(Thr)SO4·H2O}^Θ=−2111.7±3.4 kJ mol⁻¹. These experiments were made by using an isoperibol solution calorimeter at 298.15 K.     

Heat capacity and enthalpy of fusion of pyrimethanil laurate (C24H37N3O2)

Low-temperature heat capacities of pyrimethanil laurate (C₂₄H₃₇N₃O₂) were precisely measured with an automated adiabatic calorimeter over the temperature range between T = 78 K and T = 340 K. The sample was observed to melt at (321.52 ± 0.04) K. The molar enthalpy and entropy of fusion as well as the chemical purity of the compound were determined to be (67244 ± 11) J · mol⁻¹, (209.28 ± 0.02) J · mol⁻¹ · K⁻¹, (0.9943 ± 0.0004) mass fraction, respectively. The extrapolated melting temperature for the absolutely pure compound obtained from fractional melting experiments was (322.264 ± 0.006) K.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Standard molar enthalpy of formation of [(C12H8N2)2Bi(O2NO)3] and its biological activity on Schizosaccharomyces pombe

The title complex [(C₁₂H₈N₂)₂Bi(O₂NO)₃] was synthesized by reaction of 1,10-phenanthroline (phen) and Bi(NO₃)₃·5H₂O. The structure of the complex was characterized by single-crystal X-ray diffraction, IR spectroscopy, and elemental analysis. An advanced solution-reaction isoperibol microcalorimeter was applied to determine the standard molar enthalpies of formation at 298.15 K of the complex and Bi(NO₃)₃·5H₂O, giving –(798.92 ± 5.99) and –(1986.87 ± 0.20) kJ mol⁻¹, respectively. The biological effect of the complex was evaluated by microcalorimetry on the growth of Schizosaccharomyces pombe (S. pombe). According to thermogenic curves, the corresponding thermokinetics and thermodynamic parameters were derived. The complex had good bioactivity on the growth metabolism of S. pombe, with the value of IC₅₀ being 2.8 × 10⁻⁵ mol L⁻¹.

     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Determination of specific heat capacity and standard molar combustion enthalpy of taurine by DSC

Using XRY-1C calorimeter, the standard molar enthalpy of taurine was determined to be ?2546.2?kJ?mol^?1 . The reliability of the instrument used was tested by using naphthalene as reference material; and through comparing the molar combustion enthalpy of naphthalene measured with its standard value found in literature, the absolute error and relative error were found to be 4.53?kJ?mol^?1 and 0.09%, respectively. The melting point and melting enthalpy of taurine were determined by Differential Scanning Calorimetry (DSC), which was found to be 588.45?K and ?22.197?kJ?mol^?1, respectively. Moreover, using the DSC method, the specific heat capacities C _p of taurine was measured and the relationship between C _p and temperature was established. The thermodynamic basic data obtained are available for the exploiting new synthesis method, engineering design and industry production of taurine.     

The standard molar enthalpy of formation,molar heat capacities,and thermal stability of anhydrous caffeine

The constant-volume energy of combustion of crystalline anhydrous caffeine (C₈H₁₀N₄O₂) in α (lower temperature steady) crystal form was measured by a bomb combustion calorimeter, the standard molar enthalpy of combustion of caffeine at T = 298.15 K was determined to be −(4255.08 ± 4.30) kJ · mol⁻¹, and the standard molar enthalpy of formation was derived as −(322.15 ± 4.80) kJ · mol⁻¹. The heat capacity of caffeine in the same crystal form was measured in the temperature range from (80 to 387) K by an adiabatic calorimeter. No phase transition or thermal anomaly was observed in the above temperature range. The thermal behavior of the compound was further examined by thermogravimetry (TG), differential thermal analysis (DTA) over the range from (300 to 700) K and by differential scanning calorimetry (DSC) over the range from (300 to 540) K, respectively. From the above thermal analysis a (solid–solid) and a (solid–liquid) phase transition of the compound were found at T = (413.39 and 509.00) K, respectively; and the corresponding molar enthalpies of these transitions were determined to be (3.43 ± 0.02) kJ · mol⁻¹for the (solid–solid) transition, and (19.86 ± 0.03) kJ · mol⁻¹ for the (solid–liquid) transition, respectively.     

[Ni(C_5H_5N)_2(C_7·H_6O_2N)_2]H_2O三元配合物的合成及晶体结构

合成了标题化合物。该化合物的分子式[Ni(C5H5N)2(C7H6O2N)2]H2O(C24H24N4NiO3),分子量475.18,采用单色的MoKα (λ = 0.71073 )射线测定,共收集7408个数据,其中独立衍射点2567个(Rint = 0.0272),I > 2s(I)可观测点数1926个,结果表明该化合物属单斜晶系, 空间群C2/c其晶胞参数为: a = 14.466(2),b = 12.193(2),c = 14.072(2) ;β = 116.229(2)°,V = 2226.6(5) 3,Z = 4,Dc = 1.418 g/cm3 ,μ = 0.905 mm-1,F(000) = 992. 2个水杨醛亚胺各提供2个配位原子参与配位,2个吡啶各提供1个配位原子参与配位,该配合物是六配位的八面体构型,同时讨论了该体系中不同配位原子的配位能力的差异。     

Heat capacity and standard molar enthalpy of formation of crystalline 2,6-dicarboxypyridine (C7H5NO4)

Low-temperature heat capacity C_p,m of 2,6-dicarboxypyridine (C₇H₅NO₄; CAS 499-83-2) was precisely measured in the temperature range from (80 to 378) K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were calculated in the range from (80 to 378) K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined, and , by means of a precision oxygen-bomb combustion calorimeter at T = 298.15 K. The thermodynamic properties of the compound were further investigated through differential scanning calorimeter (DSC) and the thermogravimetric (TG) analysis.     

Investigation on standard molar enthalpy of combustion,specific heat capacity and thermal behavior of methionine

Journal of Thermal Analysis and Calorimetry - The standard molar enthalpy of combustion of methionine was determined to be ? 6661.03 kJ mol?1 by XRY-1C...     

Solid state and solution study of some phosphoramidate derivatives containing the P(O)NHC(O) bifunctional group: Crystal structures of CCl2HC(O)NHP(O)(NCH3(CH2C6H5))2, p-ClC6H4C(O)NHP(O)(NCH3(CH2C6H5))2, CCl2HC(O)NHP(O)(N(CH2C6H5)2)2 and p-BrC6H4C(O)NHP(O)(N(CH2C6H5)2)2

Synthetic methods for several novel phosphoramidate compounds containing the P(O)NHC(O) bifunctional group were developed. These compounds with the general formula R₁C(O)NHP(O)(N(R₂)(CH₂C₆H₅))₂, where R₁ = CCl₂H, p-ClC₆H₄, p-BrC₆H₄, o-FC₆H₄ and R₂ = hydrogen, methyl, benzyl, were characterized by several spectroscopic methods and analytical techniques. The effects of phosphorus substituents on the rotation rate around the P–N_amine bond were also investigated. ¹H NMR study of the synthesized compounds demonstrated that the presence of bulky groups attached to the phosphorus center and electron withdrawing groups in the amide moiety lead to large chemical-shift non-equivalence (Δδ_H) of diastereotopic methylene protons. The crystal structures of CCl₂HC(O)NHP(O)(NCH₃(CH₂C₆H₅))₂, p-ClC₆H₄C(O)NHP(O)(NCH₃(CH₂C₆H₅))₂, CCl₂HC(O)NHP(O)(N(CH₂C₆H₅)₂)₂ and p-BrC₆H₄C(O)NHP(O)(N(CH₂C₆H₅)₂)₂ were determined by X-ray crystallography using single crystals. The coordination around the phosphorus center in these compounds is best described as distorted tetrahedral and the P(O) and C(O) groups are anti with respect to each other. In the compound Br-C₆H₄C(O)NHP(O)(N(CH₂C₆H₅)₂)₂ (with two independent molecules in the unit cell), two conformers are connected to each other via two different N–H?O hydrogen bonds forming a non-centrosymmetric dimer. In the crystalline lattice of other compounds, the molecules form centrosymmetric dimers via pairs of same N–H?O hydrogen bonds. The structure of CCl₂HC(O)NHP(O)(N(CH₂C₆H₅)₂)₂ reveals an unusual intramolecular interaction between the oxygen of CO group and amine nitrogen.     

Study of the heat capacity of the derivatives C21H16N2O and C21H19N2O2Br of the alkaloid harmine

Temperature dependences of the heat capacity of the alkaloid harmine derivatives 9-methoxy-2-phenyl-11H-indolysine[8,7-b]indole (C₂₁H₁₆N₂O) and N-(2)-phenacylharminium bromide C₂₁H₁₉N₂O₂Br wer studied by the experimental calorimetry method.     

Synthesis and Crystal Structure of the Binuclear Complex [Pr2(C10H8N2O4)2(C10H9N2O4)2(H2O)4]·3H2O·C6H6

The binuclear praseodymium(III) complex with N‐(1‐carboxyethylidene)‐salicylhydrazide (C₁₀H₁₀N₂O₄, H₂L) was prepared in H₂O‐C₂H₅OH mixed solution, and the crystal structure of [Pr₂L₂(HL)₂(H₂O)₄]·3H₂O·C₆H₆ was determined by X‐ray single crystal diffraction. The crystal complex crystallizes in the triclinic system with space group P‐1, and in the structure each Pr atom is 9‐coordinated by carboxyl O and acyl O and azomethine N atoms of two tridentate ligands to form two stable five‐membered rings sharing one side in keto‐mode and two water molecules. The coordination polyhedron around Pr³⁺ was described as a monocapped square antiprism geometry. In an individual molecule, four tridentate ligands were coordinated by two negative univalent (HL) and two bivalent forms (L) respectively. Two negative univalent ligands were coordinated via μ₂‐bridging mode.