Luminescence and energy transfer in Dy3+/Tb3+ co-doped CaO–Al2O3–B2O3–RE2O3 glass

The new calcium aluminoborate glasses with the composition of CaO–Al₂O₃–B₂O₃–RE₂O₃ (RE = Dy and Tb) were synthesized and the luminescence of Dy³⁺ and Tb³⁺ was investigated. The results show that the emission intensity of Tb³⁺ ion was enhanced when introducing Dy³⁺ ion into CaO–Al₂O₃–B₂O₃–Tb₂O₃ glass due to the energy transfer processes between Dy³⁺ and Tb³⁺. The energy transfer efficiencies, transfer probabilities as well as donor–acceptor critical distances were also calculated. The energy transfer mechanism between Dy³⁺ and Tb³⁺ ions is electric dipole–dipole interaction, which can be concluded by both fluorescence decay and emission intensity ratio varieties.     

Spectral investigations on VO2+ ion doped in CaO–SrO–Na2O–B2O3 glass systems

Glasses of the (20 ? x)CaO–xSrO–(20 ? y)Na₂O–60B₂O₃ ? y (CSNB) system with (5 ≤ x ≤ 15) mol% and y = 0.1 mol% of V₂O₅ were characterized by X-ray diffraction (XRD), EPR (Electron Paramagnetic Resonance), Optical absorption Spectra and FT-IR (Fourier transform Infrared Spectroscopy) studies. EPR spectra of all the glass samples exhibit resonance signals characterstic of VO²⁺ ions. The values of spin-Hamiltonian parameters indicate that the VO²⁺ ions in CSNB glasses were present in octahedral sites with tetragonal compression and belong to C_4v symmetry. Spin-Hamiltonian parameters ‘g’ and ‘A’ were evaluated. The Optical band energy (E_opt) and Urbach energy (ΔE) were calculated from their ultra violet edges. By correlating EPR and Optical data the molecular orbital coefficients have been evaluated. IR spectra of these glasses were analyzed in order to identify the contribution of each component to the local structure that determines the physical properties of these glasses.     

Characteristics and biocompatibility of Na2O–K2O–CaO–MgO–SrO–B2O3–P2O5 borophosphate glass fibers

A novel Na₂O–K₂O–CaO–MgO–SrO–B₂O₃–P₂O₅ borophosphate glass fiber is prepared. The thermal properties including differential thermal analysis (DTA) and viscosity measurement of the glass were presented. The tensile strength of the glass fiber is measured. The reaction of the glass fibers in the SBF solution is characterized by XRD, FTIR and SEM. XRD and FTIR indicate that the carbonate hydroxyapatite has formed rapidly on the glass. Cell attachment, spreading and proliferation on the glass are determined by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay method using Human osteosarcoma MG-63 cells. The bioactivity and biocompatibility of the glass fiber make it a good potential prospect in the field of tissue engineering.     

Excited state absorption and up-conversion luminescence of Ho3+ centres in 3CaO–Ga2O3–3GeO2 glass

3CaO–Ga₂O₃–3GeO₂ glass excited state absorption spectra-activated with Ho³⁺ (Ho₂O₃ – 0.7 wt% content) have been measured and analysed. Up-converted emission channels have been identified and the predicted up-converted emission bands have been registered under Ar ion laser (λ = 488 nm) excitation according to the excited state absorption data. A mechanism of up-converted transitions for Ho³⁺ centres in this prototype glass network is proposed on the basis of the obtained results.     

Effect of TiO2 addition on the chemical durability of Bi2O3–SiO2–ZnO–B2O3 glass system

The effect of the substitution of ZnO for TiO₂ on the chemical durability of Bi₂O₃–SiO₂–ZnO–B₂O₃ glass coatings in hot acidic medium (0.1 N H₂SO₄ at 80 °C) for different times was studied. The thick films produced by a screen-printing method and heat treated at 700 °C/5 min were analyzed by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The glass from the Bi₂O₃–SiO₂–ZnO–B₂O₃ system developed Zn₂SiO₄ and a glassy phase that were readily attacked by hot 0.1 N sulfuric acid, whereas the heat treated coating from the Bi₂O₃–SiO₂–TiO₂–ZnO–B₂O₃ system presented a finer microstructure with thin interconnected Bi₄Ti₃O₁₂ crystals and a glassy phase more resistant to hot 0.1 N sulfuric acid attack etching.     

Synthesis and photoluminescence of Eu3+-doped ZnO–Ga2O3–SiO2 nano-glass-ceramics

Transparent rare-earth Eu³⁺-doped ZnO–Ga₂O₃–SiO₂ nano-glass-ceramics were obtained by a sol–gel method. X-ray diffraction and transmission electron microscopy were used to characterize the as-synthesized materials. Results showed that ZnGa₂O₄ nanocrystals with the size of 5 nm were precipitated from ZnO–Ga₂O₃–SiO₂ system and dispersed in the SiO₂-based glass when the heat-treatment temperature was up to 800 °C. Photoluminescence characterization of Eu³⁺-doped ZnO–Ga₂O₃–SiO₂ nano-glass-ceramics was carried out and the results show that the as-synthesized material display intense emission at 615 nm belonging to ⁵D₀ → ⁷F₂ transition.     

Spectral analysis of a novel Eu2+ activated SiO2–BaO glass ceramics phosphor under UV-LED excitation

A novel Eu²⁺ activated 60SiO₂–40BaO (mol%) glass ceramics phosphor was prepared and the optical properties were investigated. X-ray diffraction (XRD) and Raman spectra confirmed the formation of Ba₂Si₃O₈ nano-crystals in the glass matrix. The Eu²⁺ activated glass ceramics exhibited broad emission band centered at 518 nm due to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. Compared with the glass, the emission intensity of Eu²⁺ activated glass ceramics was much stronger, and the peak wavelength shifted toward shorter wavelength. The photoluminescence excitation (PLE) spectra of the glass ceramics showed an overlap with the main emission region of an ultraviolet light-emitting diode (UV-LED). According to the photoluminescence (PL) spectra, the CIE chromaticity coordinates of the Eu²⁺ activated glass and glass ceramics were calculated. The results indicated that the Eu²⁺ activated glass ceramics containing Ba₂Si₃O₈ nano-crystals can be used as a potential green emitting phosphor under UV-LED excitation.     

Formation of Co2+-doped nanocrystals in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Transparent glass-ceramics were synthesized by heat-treatment of glass with a composition of 5La₂O₃–13.2MgO–28.8Al₂O₃–46SiO₂–4.5TiO₂–2.5ZrO₂–0.15CoO (LMAS) (wt.%). The activation energy of crystallization and the Avrami parameter for the LMAS glass were determined from the DTA curves at different heating rates. The most two intense bands of Raman spectrum of initial glass at ~ 810 cm^?1 and ~ 900 cm^?1 were connected with the presence of [SiO₄] and [TiO₄] tetrahedral, respectively. After heat-treated at 700 °C/10 h+820 °C/8 h, the intensity of the band for [TiO₄] tetrahedral weakened, while an intensive band at ~ 800 cm^?1 for the Ti–O bond appeared. Other bands were characteristics of high-silicate network and x(MgTi₂O₅)·y(Al₂TiO₅) polycrystals. The changes reflected phase separation after heat-treatment of the initial glass. The strong absorption band of glass-ceramics centered at 580 nm can be assigned to ⁴A₂(⁴F)→⁴T₁(⁴P) and the broad absorption band at 1100–1700 nm to ⁴A₂(⁴F)→⁴T₁(⁴F) transitions of tetrahedral coordinated Co²⁺ ion. Two broad emission bands, one was around 660 nm, the other was from 800 nm to 1050 nm, of glass-ceramics correspond to the ⁴T₁(⁴P)→⁴A₂(⁴F) and ⁴T₁(⁴P)→⁴T₂(⁴F) transitions of tetrahedral coordinated Co²⁺ ions. The absorption and emission features clearly demonstrated that Co²⁺ ions were incorporated into nanocrystals and located in tetrahedral sites.     

Spectroscopic properties of Co2+ ions in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Co²⁺-doped La₂O₃–MgO–Al₂O₃–SiO₂ (LMAS) glass-ceramics was synthesized by conventional method. The microstructure of LMAS GCs heat-treated at 760 °C/12 h + 930 °C/4 h was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The spectroscopic properties of Co²⁺-doped LMAS GCs were studied by absorption spectrum, excitation spectrum, and temperature dependent luminescence spectra. XRD results revealed the sizes of MgAl₂O₄ crystalline phases are about 9.1 ± 1.5 nm. The three peaks in the visible absorption band of LMAS GCs at 549 nm, 585 nm and 626 nm are connected with the transitions from ⁴A₂ level to ²A₁/²T₂(²G), ⁴T₁(⁴P) and ²E/²T₁(²G) levels, respectively, and excitations into them emit the radiation at around 666 nm. The luminescence intensity increased with temperature increasing from 10 K to 150 K, while it weakened with temperature increasing from 150 K to 350 K. These features were explained by the effects of two competing mechanisms.     

Erratum to: “Non-isothermal crystallization kinetics of Fe2O3–CaO–SiO2 glass containing nucleation agent P2O5/TiO2”

Crystallography Reports -     

Synthesis and bioactive properties of macroporous nanoscale SiO2–CaO–P2O5 bioactive glass

A macroporous nanoscale bulk bioactive glass (SiO₂–CaO–P₂O₅ system) was prepared by sol–gel co-template method. Porosimeter analysis showed that the as-synthesized bioactive glasses (BGs) had a porosity of 85% and exhibited a multimodal pore size distribution, nanopores (10–40 nm) and macropores (100 nm–10 μm). Morphological and structural characterizations showed the pores were interconnected with pore walls of about 250 nm in width and 1 μm in length. In vitro bioactivity test indicated that the as-synthesized bulk BGs exhibited faster apatite layer formation capability than the conventional sol–gel BGs. Additionally, the deposited layer was identified as hydroxycarbonate apatite, which is similar to the inorganic part of human bone.     

Performance investigation of Li2O–Al2O3–4SiO2 based glass–ceramics with B2O3, Na3AlF6 and Na2O fluxes

Influence of single fluxes (10 wt.% B₂O₃), bi-component fluxes (4 wt.% B₂O₃ + 6 wt.% Na₃AlF₆), and complex fluxes (4 wt.% B₂O₃ + 4 wt.% Na₃AlF₆ + 2 wt.% Na₂O) on the thermal kinetic parameters, microstructure, flexural strength and coefficient of thermal expansion (CTE) of Li₂O–Al₂O₃–4SiO₂ (LAS) glass–ceramics was investigated through differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The results showed that complex fluxes could efficiently decrease transition temperature (T_g) and crystallization temperature (T_p), and accelerate the formation of needle-like β-spodumene crystals which benefit high flexural strength. The homogeneous LAS glass–ceramic (sample C₃) which has a high strength of 132.4 MPa and low CTE (100–650 °C) of 2.74 × 10^? 6/°C is obtained by doping of the initial LAS glass by complex fluxes of 4 wt.% B₂O₃, 4 wt.% Na₃AlF₆, and 2 wt.% Na₂O, nucleating at 630 °C/120 min and then crystallized at 780 °C/120 min. It is worthy of further investigation as a bonder of diamond composite material due to its outstanding prosperities.     

BaO–B2O3–SiO2–Al2O3 sealing glass for intermediate temperature solid oxide fuel cell

Glasses in the formulation close to BaSiO₃–BaB₂O₄ eutectic compound are developed for sealing of intermediate-temperature (500–650 °C) solid oxide fuel cell (IT-SOFC). Thermal and microstructural analyses of the glasses with 0–10 mol% Al₂O₃ are also conducted. Detailed crystallization kinetics and interfacial stability of the glass in contact with yttria-stabilized zirconia (YSZ) and samaria-doped ceria (SDC) are investigated and compared. The results show that the formulation, 47BaO–21B₂O₃–27SiO₂–5Al₂O₃ (G1A5), performs the best on glass forming ability (GFA) among all tested formulations, and shows matched thermal expansion and working temperature to CeO₂-based electrolytes of IT-SOFC. Two major crystalline phases that precipitate from G1A5 above 750 °C are platy hexacelsian and BaSiO₃ grains.     

Influence of Bi2O3 content on the crystallization behavior of TeO2–Bi2O3–ZnO glass system

Glass ceramic materials with composition 75TeO₂–xBi₂O₃–(25-x)ZnO (x = 13, 12, 11) possessing transparency in the near- and mid-infrared (MIR) regions were studied in this paper. It was found that as the Bi₂O₃ content increased in the glass composition, the observed crystallization tendency is enhanced, and high crystal concentrations were obtained for the glasses with high Bi₂O₃ content while maintaining transparency in the MIR region. Crystal size in the glass ceramic was reduced by adjusting the heat treatment conditions; the smallest average size obtained in this study is 700 nm. Bi_0.864Te_0.136O_1.568 was identified using X-ray Diffraction (XRD) and found to be the only crystal phase developed in the glass ceramics when the treatment temperature was fixed at 335 °C. The morphology of the crystals was studied using Scanning Electron Microscopy (SEM), and crystals were found to be polyhedral structures with uniform sizes and a narrow size distribution for a fixed heat treatment regime. Infrared absorption spectra of the resulting glass ceramics were studied. The glass ceramic retained transparency in the infrared region when the crystals inside were smaller than 1 μm, with an absorption coefficient less than 0.5/cm in the infrared region from 1.25 to 2.5 μm. The mechanical properties were also improved after crystallization; the Vickers Hardness value of the glass ceramic increased by 10% relative to the base glass.     

Microstructural characteristics and crystallization of CaO–P2O5–Na2O–ZnO glass ceramics prepared by sol–gel method

Porous phosphate-based glass ceramics prepared by the sol–gel method were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and differential thermal analysis (DSC). The 48CaO–45P₂O₅–2ZnO–5Na₂O glassy system can remain fully amorphous up to 550 °C. After heat treated at 650 °C, the obtained porous bodies consisted of dense struts and macropores where β-Ca₂P₂O₇ and Na₂CaP₂O₇ phases crystallized from the glass matrix. When treated at 750 °C, Ca₄P₆O₁₉ and NaZn(PO₃)₃ precipitated homogeneously as new phases among the residual glass matrix. The material was assessed by soaking samples in phosphate-based buffer solution (PBS) solution to determine the solubility and observe apatite formation.     

Nitridation of SiO2–B2O3 aerogels

SiO₂–B₂O₃ aerogels have been prepared by drying wet gels at a supercritical condition for ethanol in an autoclave. Aerogels have been nitrided for 6 h in flowing ammonia at the temperature of 1200 °C. It has been found that the amount of nitrogen incorporated in these aerogels always exceeds 20 wt%. This is a much higher value compared with the amount of nitrogen incorporated in a pure silica aerogel nitrided at the same conditions. The specific surface area of SiO₂–B₂O₃ aerogels has been between 312 and 359 m²/g. After nitridation some shrinkage of aerogels has been observed and the surface area decreases about 20%. In FTIR spectra of SiO₂–B₂O₃ aerogels a typical bands for SiO₂ are observed. After nitridation a shift and broadening of 1100 cm^?1 band to lower wavenumbers indicates that Si–N and B–N bonds are formed in nitrided aerogels.     

白光发光二极管用CaAl2B2O7:Eu3+微晶的发光性质

利用高温固相法合成了CaAl2B2O7:Eu3+微晶.X射线衍射分析表明我们得到了纯相的CaAl2B2O7基质.样品在近紫外光和蓝光激发下能发出红光.发射光谱的主峰位于614nm,对应于Eu3+的5D0→7F2跃迁.激发光谱中两个主峰位于401nm和471nm,分别与紫外和蓝光LED相匹配.并研究了电荷补偿剂和Eu3+的浓度对样品发光强度的影响.所有掺入电荷补偿剂(Li+,Na+和K+)样品的发光强度都比没有掺入电荷补偿剂的样品高.其中掺入Li+的样品的发光强度最高.Eu3+的最佳浓度为6;.CaAl2B2O7:Eu3+是一种有应用前景的白光LED用红色荧光粉.     

Spinodal decomposition during continuous cooling of a PbOB2O3Al2O3 glass

Spinodal decomposition during continuous cooling of the PbOB₂O₃Al₂O₃ quasi-binary glass system was analysed by numerical integration of Cook's differential equation (which includes the contribution of random density fluctuations) for small angle X-ray scattering (SAXS) intensity. The SAXS curves derived from the calculations have a wide range of k-Fourier components (0 < k < k_c) for which a positive amplification factor occurs and they show a “crossover” point at $\text{k}{}_{\mathrm{c}}\text{= 0.155}\text{A}\text{?}{}^{\mathrm{?1}}$. The wavenumber which receives maximal amplification, k_m, increases with the cooling rate, Q, as $\text{Q}{}^{\mathrm{<mtext>1</mtext><mtext>n</mtext>}}$, with n = 10.9. This Q dependence of k_m is similar to that predicted by Huston et al., however our results show a higher value of n. The dependence on Q and k_m of the SAXS intensity I(k_m) was also deduced. The measurements of SAXS curves were performed on glass samples prepared by the splat-cooling technique. Because of the difficulties which arise in the determination of the cooling rate of the samples, the only experimental results that could be compared with the theory are the k_m dependence of I and the value of k_c. These results are satisfactorily understood in terms of the present analysis.     

Magnetite nanoparticles prepared by the crystallization of Na2O–Fe2O3–B2O3–SiO2 glasses

A glass with the composition of 35Na₂O–24Fe₂O₃–20B₂O₃–20SiO₂–1ZnO (mol%) was melted, quenched, using a twin roller technique, and subsequently heat treated in the range 485–750 °C for 1–2 h. This led to the crystallization of magnetite as the sole or the major crystalline phase.Heat treatment at lower temperatures resulted in the crystallization of magnetite crystals 7–20 nm in diameter, whereas heat treatment at higher temperatures produced higher quantities of magnetite and much larger crystals. The room temperature magnetization and coercive force values were in the range of 6–57 emu g^? 1 and 0–120 Oe, respectively for the heat treated glasses.