Properties of ionic liquid HMIMPF6 with carbonates,ketones and alkyl acetates

The densities and refractive indices of the pure ionic liquid (IL) HMIMPF₆ were determined at temperature range from T =(278.15 to 318.15) K for density and from T = (288.15 to 318.15) K for refractive index. The coefficient of thermal expansion of HMIMPF₆ was calculated from the experimental values of density. The densities and refractive indices of binary mixtures involving dimethyl carbonate (DMC), diethyl carbonate (DEC), acetone, 2-butanone, 2-pentanone, methylacetate, ethylacetate, and butylacetate + HMIMPF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate) have been measured at T = 298.15 K and atmospheric pressure. Excess molar volumes and changes of refractive index on mixing for the binary systems were calculated. The miscibility of IL with different organic solvents and (liquid + liquid) equilibrium (LLE) data of binary mixture HMIMPF₆ + DEC have been determined experimentally.     

Densities,viscosities, refractive indices,and surface tensions for binary and ternary mixtures of 2-propanol,tetrahydropyran, and 2,2,4-trimethylpentane

Densities, viscosities, refractive indices, and surface tensions of the ternary system (2-propanol + tetrahydropyran + 2,2,4-trimethylpentane) at T = 303.15 K and its constituent binary systems (2-propanol + tetrahydropyran, 2-propanol + 2,2,4-trimethylpentane, and tetrahydropyran + 2,2,4-trimethylpentane) at T = (293.15, 303.15, 313.15, and 323.15) K were measured at atmospheric pressure. Densities were determined using a vibrating-tube densimeter. Viscosities were measured with an automatic microviscometer based on the rolling-ball principle. Refractive indexes were measured using a digital Abbe-type refractometer. Surface tensions were determined by the Wilhelmy-plate method. From these data, excess molar volumes, deviations in viscosity, deviations in refractive index, and deviations in surface tension were calculated. The results for the binary and ternary systems were fitted to the Redlich–Kister equation and the variable-degree polynomials in terms of compositions, respectively. The experimental and calculated quantities are used to study the nature of mixing behaviour between mixture components.     

Density,viscosity, refractive index,excess molar enthalpy,viscosity, and refractive index deviations for the (1-butanol + 2-butanone) binary system at T = 303 K. A new adiabatic calorimeter for heat of mixing

Density, viscosity, refractive index, and heat of mixing measurements for {x₁ 1-butanol + (1 ? x₁) 2-butanone} at T = 303 K were made over the whole concentration range. Data of the binary mixture were further used to calculate the viscosity and refractive index deviations, and excess molar enthalpy. The excess or deviation properties were fitted with the Redlich–Kister polynomial relation to obtain their coefficients and standard deviations. The construction of an adiabatic calorimeter useful in the neighbourhood of room temperature is described. Its performance was checked by measuring the heat of mixing for {x₁ benzene + (1 ? x₁) cyclohexane} over the whole concentration range at T = 298 K. Experimental results are within a standard deviation of 9 J · mol^?1 of the accepted literature values.     

Viscosities and refractive indices of binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate with water at 298 K

Viscosities and refractive indices have been determined for (water + 1-butyl-3-methylimidazolium tetrafluoroborate) and (water + 1-butyl-2,3-dimethylimidazolium tetrafluoroborate) mixtures at 298.15 K, over the whole composition range. The refractive indices were compared with the predictions of the Lorentz–Lorenz, Wiener, and Gladstone–Dale equations. Viscosity deviations (Δη) and refractive index deviations (Δn_D) have been calculated and fitted to the Redlich–Kister polynomial equations. Δn_D are positive whereas Δη are negative over the entire mixture composition for the two salts. The influence of the structure of imidazolium cation on the above physicochemical properties was discussed.     

Density,refractive index on mixing,and speed of sound of the ternary mixtures (dimethyl carbonate or diethyl carbonate + methanol + toluene) and the corresponding binaries atT = 298.15 K

The density, refractive index on mixing, and speed of sound at T =  298.15 K and atmospheric pressure have been measured over the whole composition range for {dimethyl carbonate (DMC), or diethyl carbonate (DEC)  +  methanol  +  toluene}, (diethyl carbonate  +  methanol), (dimethyl carbonate, or diethyl carbonate  +  toluene), and (methanol  +  toluene). Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems have been calculated. Redlich–Kister and Cibulka equations have been used to estimate the binary and ternary fitting parameters and standard deviations from the regression lines are shown. Values of derived and excess properties were estimated and compared by different methods.     

Thermophysical study of 1,4-dioxane with cycloalkane mixtures

Densities, refractive indices, and surface tension for the binary mixtures 1,4-dioxane with cyclopentane or cylohexane have been determined at ambient pressure and at T = (283.15, 298.15, and 313.15) K. Excess volumes and refractive index and surface tension deviations have been calculated from the experimental data. Several relations between the thermophysical properties studied here have been tested using our experimental results.     

Volumetric properties,viscosities and refractive indices of binary liquid mixtures of tetrafluoroborate-based ionic liquids with methanol at several temperatures

Densities, speeds of sound, viscosities and refractive indices of two binary systems 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] + methanol and 1-ethyl-3-methylimidazolium tetrafluoroborate [emim][BF₄] + methanol, as well as of all pure components, have been measured covering the whole range of compositions at T = (278.15 to 318.15) K and p = 101 kPa. From this data, excess molar volumes, excess isentropic compressibilities, viscosity deviations and refractive index deviations were calculated and fitted to extended versions of the Redlich–Kister equation. Estimated coefficients of these equations taking into account the dependence on composition and temperature simultaneously were also presented.     

Density,speed of sound and refractive index of (n-hexane + cyclohexane + 1-hexanol) atT = 298.15 K

Densities, speeds of sound and refractive indices have been measured for (n -hexane  +  cyclohexane  +  1-hexanol) and its corresponding binaries atT =  298.15 K. In addition, ideal isentropic compressibilities were calculated from the speeds of sound, densities, and literature heat capacities and cubic expansion coefficients. The excess molar volumes and excess isentropic compressibilities, and deviations of the speed of sound and refractive index are correlated by polynomials and discussed.The Nitta–Chao model was used to estimate binary and ternary excess molar volumes, and several empirical equations were also used to calculate the excess and deviation properties.     

Excess enthalpies and excess heat capacities of binary mixtures of (cyclohexanone,or 2-butanone,or 1,4-dioxane + 1,2-dimethoxyethane) and (1,4-dioxane + 1,2-dimethoxyethane) atT = 298.15 K

Excess enthalpies and excess heat capacities of { x 2-butanone  +  (1  − x)1,4-dioxane}, and { x cyclohexanone, or 2-butanone, or 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were measured atT =  298.15 K. Excess enthalpies were negative for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane}, and negative with a small positive part in the region ofx >  0.8 for { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, whereas excess enthalpies of { x 2-butanone  +  (1  − x)1,4-dioxane} were positive as for { x cyclohexanone  +  (1  − x)1,4-dioxane} previously reported. Excess enthalpies of {x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were positive. The results were compared with the systems reported earlier. Excess heat capacities are positive for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane} and { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, and negative for { x 2-butanone  +  (1  − x)1,4-dioxane} and { x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane}. The last mixture shows a W-shaped curve of excess heat capacity.     

Densities,speeds of sound,and refractive indices of the ternary mixtures (toluene + methyl acetate + butyl acetate) and (toluene + methyl acetate + methyl heptanoate) at 298.15 K

Density, ρ, speed of sound, u, and refractive index, n_D, at 298.15 K and atmospheric pressure have been measured over the entire composition range for (toluene + methyl acetate + butyl acetate) and (toluene + methyl acetate + methyl heptanoate) systems. Excess molar volumes, V^E, isentropic compressibility, κ_s, isentropic compressibility deviations, Δκ_s, and changes of refractive index on mixing, Δn_D, for the above systems, have been calculated from experimental data and fitted to Cibulka, Singh et al., and Nagata and Sakura equations, standard deviations from the regression lines are shown. Geometrical solution models, Tsao and Smith, Kholer, Jacob and Fitzner, Rastogi et al. were also applied to predict ternary properties from binary contributions.     

Isothermal (vapour + liquid) equilibrium and thermophysical properties for (1-butyl-3-methylimidazolium iodide + 1-butanol) binary system

Experimental isothermal (vapour + liquid) equilibrium (VLE) data are reported for the binary mixture containing 1-butyl-3-methylimidazolium iodide ([bmim]I) + 1-butanol at three temperatures: (353.15, 363.15, and 373.15) K, in the range of 0 to 0.22 liquid mole fraction of [bmim]I. Additionally, refractive index measurements have been performed at three temperatures: (293.15, 298.15 and 308.15) K in the whole composition range. Densities, excess molar volumes, surface tensions and surface tension deviations of the binary mixture were predicted by Lorenz–Lorentz (n_D-ρ) mixing rule. Dielectric permittivities and their deviations were evaluated by known equations. (Vapour + liquid) equilibrium data were correlated with Wilson thermodynamic model while refractive index data with the 3-parameters Redlich–Kister equation by means of maximum likelihood method. For the VLE data, the real vapour phase behaviour by virial equation of state was considered. The studied mixture presents S-shaped abatement from the ideality. Refractive index deviations, surface tension deviations and dielectric permittivity deviations are positive, while excess molar volumes are negative at all temperatures and on whole composition range. The VLE data may be used in separation processes design, and the thermophysical properties as key parameters in specific applications.     

Physico-chemical and excess properties of the binary mixtures of methylcyclohexane + ethanol, + propan-1-ol, + propan-2-ol, + butan-1-ol, + 2-methyl-1-propanol,or 3-methyl-1-butanol at T = (298.15, 303.15, and 308.15) K

Physico-chemical properties viz., density, viscosity, and refractive index at temperatures = (298.15, 303.15, and 308.15) K and the speed of sound at T = 298.15 K are measured for the binary mixtures of methylcyclohexane with ethanol, propan1-ol, propan-2-ol, butan-1-ol, 2-methyl-1-propanol, and 3-methyl-1-butanol over the entire range of mixture composition. From these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility have been calculated. These results are fitted to the polynomial equation to derive the coefficients and standard errors. The experimental and calculated quantities are used to study the nature of mixing behaviours between the mixture components.     

Study on the phase behaviour and thermodynamic properties of ionic liquids containing imidazolium cation with ethanol at several temperatures

Experimental densities, speeds of sound and refractive indices of the binary mixtures of ethanol with MMIM MeSO₄ (1,3-dimethylimidazolium methyl sulfate), BMIM MeSO₄ (1-butyl-3-methylimidazolium methyl sulfate), BMIM PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate), HMIM PF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate) and OMIM PF₆ (1-methyl-3-octylimidazolium hexafluorophosphate) were determined from T = (293.15 to 303.15) K. Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems were calculated. The (liquid + liquid) equilibrium (LLE) data of (IL + ethanol) were carried out experimentally and the NRTL and UNIQUAC correlative equation was applied to these mixtures.     

Densities,excess molar volumes,and refractive indices of 1,1,2,2-tetrabromoethane and 1-alkanols binary mixtures

Densities, excess molar volumes, refractive indices, and changes in refractive index on mixing for (1,1,2,2-tetrabromoethane + 1-pentanol, or 1-hexanol, or 1-heptanol, or 1-octanol, or 1-decanol) have been determined at T = 293.15 K and at T = 303.15 K. The excess molar volumes and changes in refractive index have been fitted to Redlich–Kister polynomials. The effect of the chain length of the 1-alkanol on the excess molar volume and the change in the refractive index of its mixtures with 1,1,2,2-tetrabromoethane are discussed. In addition, the refractive indices are compared with calculated values using mixing rules proposed by several authors, and a good agreement is obtained.     

Relative permittivity data of binary mixtures containing 2-butanol, 2-butanone,and cyclohexane

Relative permittivity measurements were made on binary mixtures of (2-butanol + 2-butanone) and (2-butanol or 2-butanone + cyclohexane) for various concentrations at T = (298.2, 308.2, and 318.2) K. Some experimental results are compared with those obtained from theoretical calculations and interpreted in terms of homo- and heterogeneous interactions and structural effects. The molecular dipole moments were determined using Guggenheim–Debye method within the temperature range of (298.2 to 318.2) K. The variations of effective dipole moment and correlation factor, g, with the mole fraction in these materials were investigated using Kirkwood–Frohlich equation. The pure compounds showed a negative and small temperature coefficient of effective dipole moment. In order to obtain valuable information about heterogeneous interaction (interactions between the unlike molecules), the Kirkwood correlation factor, the Bruggeman dielectric factor and the excess permittivity were calculated. In order to predict the permittivity data of polar–apolar binary mixtures, five mixing rules were applied.     

Density,speed of sound,and refractive index measurements for the binary systems (butanoic acid + propanoic acid,or 2-methyl-propanoic acid) at T = (293.15 to 313.15) K

Density, speed of sound, and refractive index for the binary systems (butanoic acid + propanoic acid, or 2-methyl-propanoic acid) were measured over the whole composition range and at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K. The excess molar volumes, isentropic compressibilities, excess isentropic compressibilities, molar refractions, and deviation in refractive indices were also calculated by using the experimental densities, speed of sound, and refractive indices data, respectively. The Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume, excess isentropic compressibility and deviation in refractive index data. The thermodynamic properties have been discussed in terms of intermolecular interactions between the components of the mixtures.     

Effect of the temperature on the physical properties of pure 1-propyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide and characterization of its binary mixtures with alcohols

In this paper, physical properties of a high purity sample of the ionic liquid 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], and its binary mixtures with methanol, ethanol, 1-propanol, and 2-propanol were measured at atmospheric pressure. The temperature dependence of density, refractive index and speed of sound (293.15 to 343.15) K and dynamic viscosity (298.15 to 343.15) K were studied at atmospheric pressure by conventional techniques for the pure ionic liquid. For its mixtures with alcohols, density, speed of sound, and refractive index were measured at T = 298.15 K over the whole composition range. The thermal expansion coefficient of the [PMim][NTf₂] was calculated from the experimental results using an empirical equation, and values of the excess molar volume, excess refractive index, and excess molar isentropic compressibility for the binary systems at the above mentioned temperature, were calculated and fitted to the Redlich–Kister equation. The heat capacity of the pure ionic liquid at T = 298.15 K was determined using DSC.     

Thermophysical property characterization of aqueous amino acid salt solutions containing α-aminobutyric acid

In this study, density, electrical conductivity, refractive index and viscosity of aqueous potassium and sodium salt solutions of α-aminobutyric acid were presented. Measurements were done over the temperature range (303.15 to 343.15) K and atmospheric pressure for salt compositions from x₁ = 0.009 to 0.062. A modified Graber et al. equation was used to correlate the density, electrical conductivity, and refractive index with temperature and composition leading to average absolute deviations (AAD) between the predicted and calculated values of 0.04%, 0.7%, and 0.01%, respectively. The viscosity data were represented as a function of temperature and composition via Vogel–Tamman–Fulcher (VTF) type equation at an AAD of 0.6%.     

Densities,excess molar volumes,and refractive indices of 1,1,2,2-tetrachloroethane and 1-alkanols binary mixtures

Densities, excess molar volumes, refractive indices, and changes in refractive index on mixing for 1,1,2,2-tetrachloroethane + 1-pentanol, or 1-hexanol, or 1-heptanol, or 1-octanol, or 1-decanol have been determined at T = (293.15 and 303.15) K. The excess molar volumes and changes in refractive index have been fitted to Redlich–Kister polynomials. The effect of the chain length of the 1-alkanol on the excess molar volume and the change in the refractive index of its mixtures with 1,1,2,2-tetrachloroethane was discussed. In addition, the refractive indices were compared with calculated values using mixing rules proposed by several authors, and a very good agreement was obtained.     

Phase equilibrium properties of binary aqueous solutions of benzylamine, 1,2-bis(2-aminoethoxy)ethane,or 2-[2-(dimethylamino)ethoxy]ethanol

The vapour pressures of (benzylamine + water), {1,2-bis(2-aminoethoxy)ethane + water}, or {2-[2-(dimethylamino)ethoxy]ethanol + water} binary mixtures, and pure 2-[2-(dimethylamino)ethoxy]ethanol component were measured by means of two static devices at temperatures between (283.15 and 363.15 (or 323.15)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (benzylamine + water) binary mixture exhibits positive deviations in G^E for (303.15 < T/K < 323.15) and a sinusoidal shape in G^E for T > 323.15 K over the whole composition range. The aqueous 1,2-bis(2-aminoethoxy)ethane or {2-[2-(dimethylamino)ethoxy]ethanol + water} solutions exhibit negative deviations in G^E for all investigated temperatures over the whole composition range.