Preparation of TiO2–Na2O glass by sol–gel method and structural characterization

The applicability of sol–gel process in glass formation of binary system, (100 − x)TiO₂–xNa₂O (x = 10, 20, 30), was investigated and the glasses were prepared successfully by the sol–gel process for the first time. The process of glass formation was checked by using X-ray diffraction measurement and DTA–TG analysis. In the baking step, a DTA peak related to the crystallization of gel was found. The short-range structure of glassified samples was studied by neutron scattering measurement. It is found from the results of neutron scattering measurement that the coordination number of O atom around Ti atom is about 4, and the O atoms around Ti atom form a planer square rather than a regular tetrahedron.     

The densities of mixed glass former 0.35 Na2O + 0.65 [xB2O3 + (1 − x)P2O5] glasses related to the atomic fractions and volumes of short range structures

The mixed glass former effect (MGFE) is defined as a non-linear and non-additive change in the ionic conductivity with changing glass former fraction at constant modifier composition between two binary glass forming compositions. In this study, mixed glass former (MGF) sodium borophosphate glasses, 0.35 Na₂O + 0.65 [xB₂O₃ + (1 ? x)P₂O₅], 0 ≤ x ≤ 1, which have been shown to have a strong positive MGFE, have been prepared and their physical properties, density and molar volume, have been examined as predictors of structural change. The density exhibits a strong positive non-linear and non-additive change in the density with x and a corresponding negative non-linear and non-additive change in the molar volume. In order to understand the structural origins of these changes, a model of the molar volume was created and best-fit to the experimentally determined molar volumes in order to determine the volumes of the short range order (SRO) structural units in these glasses, how these volume change from the molar volumes of the binary glasses, and how these volumes change across the range of x in the ternary glasses. The best-fit model was defined as the model that required the smallest changes in the volumes of the ternary phosphate and borate SRO structural groups from their values determined by the densities of the binary sodium phosphate and sodium borate glasses. In this best-fit molar volume model, it was found that the volumes of the various phosphate and borate SRO structural groups decreased by values ranging from a minimum value of ~ 1% for x = 0.1 and 0.9 to a maximum value of ~ 6% for the phosphate and ~ 9% for the borate SRO groups at the minimum in molar volume at x = 0.4. The free volume was found to have a negative deviation from linear which is unexpected given the positive deviation in ionic conductivity.     

Catalysis and proton-conduction of novel phosphate glasses

The performance of phosphate glasses as a catalyst for water decomposition and a proton conductor was investigated. Glasses with a composition of 30Na₂O–10BaO–30P₂O₅–(30?x)WO₃–xNb₂O₅ (5 < x < 25) decompose water vapor and generate hydrogen at 500 °C. The best decomposition performance was observed on a specimen with the Nb₂O₅ composition of x = 15. A part of hydrogen produced on the glass surface changes to protons by reducing W⁶⁺ ions and penetrates into the glass. The electron is the dominant charge carrier in the electric conduction of W-rich glasses, whereas proton conduction is predominant in Nb-rich glasses in hydrogen atmosphere. A Raman scattering experiment revealed that Nb contributes to depolymerize the –P–O–P– chains in the phosphate glass producing non-bridging oxygen. A possible model was proposed for the water decomposition and proton conduction processes.     

Structure and properties of potassium niobato-borophosphate glasses

Bulk glasses of the series (1 ? x)[0.5K₂O–0.1B₂O₃–0.4P₂O₅]–xNb₂O₅ with x = 0–45.7 mol% Nb₂O₅ were prepared by slow cooling in air and investigated by Raman, ³¹P, and ¹¹B MAS NMR spectroscopy. The incorporation of Nb₂O₅ into the parent borophosphate glass results in a substantial increase in the glass transition temperature and chemical durability of glasses. Raman spectra showed that Nb atoms form distorted NbO₆ octahedra, which are isolated at low Nb₂O₅ content, whereas at higher Nb₂O₅ content they form clusters. ¹¹B NMR spectra of the glasses revealed the interaction between Nb₂O₅ and BO₄ tetrahedral units, which results in a partial transformation of tetrahedral BO₄ units to trigonal BO₃ units and the formation of mixed B(OP)_4?n(ONb)_n units.     

The effect of TiO2 on phase separation and crystallization of glass-ceramics in CaO–MgO–Al2O3–SiO2–Na2O system

The experiments were carried out on studying the effect of phase separation on nucleation and crystallization in the glass based on the system of CaO–MgO–Al₂O₃–SiO₂–Na₂O. In the experiments, TiO₂ was chosen as nucleating agent. Three batches of 5, 8 and 10 wt% TiO₂ substitution were investigated by the techniques of DSC, XRD, FTIR and FESEM equipped with EDS. XRD and FTIR analysis indicated that the super cooled glasses were all amorphous, the heat treatment leading to nucleation would cause a disruption of silica network which followed phase separation. The phase separation followed the generation of crystal seeds Mg(Ti, Al)₂O₆. FESEM observation and EDS analysis revealed that the more TiO₂ content of glass, the more droplet separated phase and crystal seeds after nucleation heat treatment. The main crystal phase is clinopyroxene, Ca(Ti, Mg, Al)(Al, Si)O₆, of crystallized glass.     

Structure and properties of MoO3-containing zinc borophosphate glasses

ZnO–B₂O₃–P₂O₅ glasses doped with MoO₃ were investigated in the series (100?x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xMoO₃, where bulk glasses were obtained by slow cooling in air within the compositional region of 0 ? x ? 60 mol% MoO₃. The incorporation of MoO₃ into the parent zinc borophosphate glass results in a weakening of bond strength in the structural network, which induces a decrease in chemical durability and glass transition temperature. Raman spectra reflect the incorporation of molybdate groups into the glass network of the studied glasses by the presence of the polarized vibrational band at ≈976 cm^?1 ascribed to the MO_x symmetric stretching vibrations and the depolarized band at ≈878 cm^?1 ascribed to the Mo–O–Mo stretching vibration. The incorporation of molybdate units into the glass network results in the depolymerization of phosphate chains and the formation of P–O–Mo bonds, as reflected in Raman and ³¹P NMR spectra. According to the ¹¹B MAS NMR spectra, tetrahedral B(OP)_4?x(OMo)_x units are formed in the glasses, whereas only a small amount of BO₄ units is converted to BO₃ units in the MoO₃-rich glasses.     

Structure and crystallization behavior of mixed potassium-lithium niobiosilicate glasses

Potassium-lithium niobiosilicate (KLiNS) glasses with a composition of (27 ? x)K₂O · xLi₂O · 27Nb₂O₅ · 46SiO₂ (x = 0, 3, 12 and 20) have been synthesized by a melt-quenching method. The glass structure and devitrification behavior have been studied by Raman spectroscopy, DTA, and XRD. By increasing the lithium content, less distorted niobium octahedra increase, indicating a niobium clustering. This change strongly affects the crystallization behavior. In the glasses x = 0 and x = 3, just above T_g, only nanocrystals of an unidentified phase are formed, while for x = 12 and x = 20 potassium lithium niobate (KLN) solid solutions with tetragonal tungsten–bronze structure crystallize by bulk nucleation. In these glasses, LiNbO₃ crystallizes at higher temperature by surface nuclei. Ultimately, it is possible to produce nanostructured glasses based on KLN nanocrystals, by partial replacement of K by Li.     

Glass formation of Ti–Ni–Sn ternary alloys correlated with TiNi–Ti3Sn pseudo binary eutectics

Glass-forming ability (GFA) of Ti–Ni–Sn ternary alloys was investigated. Applying recent models based on atomic size ratio and efficient packing, the composition favoring the glass formation is predicted. Our experiments indicate that the optimized glass-forming composition is located at Ti₅₆Ni₃₈Sn₆, with the critical thickness of complete glass formation approaching 100 μm for the melt-spun ribbons. The Ti₅₆Ni₃₈Sn₆ metallic glass exhibits a sizable supercooled liquid region (ΔT_x) of about 35 K and a reduced glass transition temperature (T_rg) of 0.52. We demonstrate that the glass formation of the Ti₅₆Ni₃₈Sn₆ alloy correlates with the (L → TiNi + Ti₃Sn) pseudo binary eutectic reaction in Ti–Ni–Sn ternary system, which has an invariant temperature and composition at ～1370 K and ～Ti₅₈Ni₃₄Sn₈, respectively. With respect to Sn-free Ti–Ni binary alloys, the GFA is enhanced for the Ti–Ni–Sn ternary alloys, but the improvement is limited possibly due to changes in the crystalline phases competing with glass formation.     

The effect of copper ions addition on structural and optical properties of zinc borate glasses

Glasses in the ternary system xCuO?(100 ? x)[55B₂O₃·45ZnO] (0 ≤ x ≤ 20 mol%) have been prepared by melting at 1200 °C and rapidly cooling at room temperature. The effect of copper ions addition in 55B₂O₃·45ZnO glass matrix together with the matrix effect on paramagentic behavior has been investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential thermal analysis (DTA), electron paramagnetic resonance (EPR), ultraviolet–visible (UV–VIS) spectroscopy and density measurements. The increase of the number of non-bridging oxygen (NBO) atoms as a function of CuO content in these glasses leads to the decrease of glass polymerization which reduces the stability of the glasses and favors the association of copper ions in clusters. This leads to the major changes of structural and optical properties of the studied glasses as can be seen from the data obtained by FTIR and EPR spectroscopies.     

Structure of potassium germanophosphate glasses by X-ray and neutron diffraction: 3. Reverse Monte Carlo simulations

Reverse Monte Carlo (RMC) is used to investigate the origin of the first sharp diffraction peaks (FSDP) found for K₂O–GeO₂–P₂O₅ glasses at very small scattering vector Q = ～7.5 nm^?1. Structures of the ternary glass with the greatest intensity of FSDP (KGeP5 – 25/50/25 mol% K₂O/GeO₂/P₂O₅), of the binary combinations of the three oxides and of vitreous GeO₂ are modeled. Results are deduced from comparisons of the partial structure factors and inspections of model sections. The P sites are uniformly distributed in the structure of KGeP5. The K⁺ ions interact more with the PO₄ units (via O_T-corners) than with Ge-centered units. Main component of the FSDP comes from the S_GeGe(Q) factor. The FSDP is due to separations of ～1 nm between the longish Ge-rich clusters which are visible in the corresponding models. Different to our tentative structural models reported before, the PO₄ tetrahedra possess a broad distribution of numbers of O_T corners. The FSDP’s of the binary K₂O–GeO₂ and K₂O–P₂O₅ glasses (～10 nm^?1) are due to a chemical order between network former and network modifier regions. The MRO of a mixed GeO₂–P₂O₅ glass of small P₂O₅ content (FSDP at ～16 nm^?1) shows great similarity to the MRO of vitreous GeO₂.     

Kinetic fragility of hydrous soda-lime-silica glasses

The effect of hydration on the kinetic fragility of soda-lime-silica glasses was investigated by viscometry in the glass transition range. Water-bearing glasses were prepared from industrial float glass (FG) and a ternary model glass (NCS = 16Na₂O 10CaO 74SiO₂ in mol%) by bubbling steam through the melt at 1480 °C and up to 7 bar. Additionally, a sodium borosilicate glass (NBS = 16Na₂O 10B₂O₃ 74SiO₂ in mol%) was hydrated under equal conditions. As detected by infrared spectroscopy water dissolves in the glasses exclusively as OH-groups. The hydration resulted in a total water content C_W up to ≈ 0.2 wt% for FG, NCS and NBS glasses. Kinetic fragility, expressed by the steepness index m, was determined from the temperature dependence of η at the glass transition. Viscosity data from previous studies on hydrous float glasses (C_W > 1 wt%) were surveyed together with literature data on the (H₂O)–Na₂O–CaO–SiO₂, (H₂O)–Na₂O–SiO₂ and (H₂O)–SiO₂ systems to expand the range of water concentration and bulk composition. We could demonstrate that m decreases for all glasses although water is dissolved as OH and should depolymerize the network. An empirical equation of the general type m = a ? b logC_W where a, b are fitting parameters, enables m to be predicted, for each glass series as function of the water content C_W. The enlarged data base shows that the parameter B of the Arrhenius viscosity-temperature relation decreases much stronger than the isokom temperature at the glass transition.     

Mixed conductivity in tungstenite–phosphate glasses containing alkali metal ions

The conductivity of glasses in the 50WO₃–(50 ? x)P₂O₅–xA₂O (A = Na, K, Cs) system has been investigated as a function of composition. It is shown that in tungstenite–phosphate glasses containing different alkali metal ions the conductivity decreases with an increase in the alkali metal ion content. A decrease in conductivity is larger for heavier ions and reaches more than seven orders of magnitude in the case of glass containing Cs₂O. This behavior remains in contrast to the literature data on conductivity in transition metal oxide glasses containing alkali metal ions where usually strong conductivity anomalies of several orders of magnitude at certain amount of ions are observed. No necessity of ion–polaron interaction has been pointed out.     

Structure of rare-earth phosphate glasses by X-ray and neutron diffraction

Previous diffraction studies of the structures of rare-earth phosphate glasses (R₂O₃)_x(P₂O₅)_1−x are extended to glasses with smaller R³⁺ ions with R = Sm, Gd, Dy, Er, Yb, Y for x = ∼0.25 and with R = Nd, Sm, Gd for x = ∼0.15. Parameters for the P–O, R–O and O–O first-neighbor peaks were obtained by Gaussian fitting. P–P and R–P distances were estimated from the positions of peak maxima. Effects of residual silica or alumina contents present as a result of glass processing were taken into account for selected samples. The P–O coordination number, N_PO, and the P–O, O–O, P–P distances are consistent with the presence of phosphate tetrahedra and are insensitive to the R species and the R₂O₃ content. Rare-earth coordination numbers, N_RO, decrease from ∼8 to ∼6.5 when x is increased from ∼0.15 to ∼0.25. N_OO and N_PP decrease with increasing R₂O₃ content indicating the network disintegration. The numbers N_RO of the metaphosphate glasses (x = ∼0.25) decreases from ∼7 to ∼6 when R is changed from La to Yb. This change is also indicated by the behavior of the R–O distances and by constant number densities of atoms. The decrease in N_RO with increasing R₂O₃ content is due to the reduction in the number of terminal O (O_T) available for coordination of the R³⁺ ions (six at metaphosphate composition). Especially for smaller R³⁺ ions sharing O_T between two R sites is not favored. The decrease by ∼0.04 nm of the prominent R–R first-neighbor distance with a change of R from La to Yb at the metaphosphate composition is indicated by a shift to higher magnitude of scattering vector of the shoulder occurring in front of the first main diffraction peak.     

Molar volume,glass-transition temperature,and ionic conductivity of Na- and Rb-borate glasses in comparison with mixed Na–Rb borate glasses

Mass densities, molar volumes, glass-transition temperatures, and ionic conductivities are measured in series of YNa₂O · (1 − Y)B₂O₃ glasses, with Y = 0.00, 0.04, 0.08, 0.12, 0.16, 0.20, 0.25, 0.30 and YRb₂O · (1 − Y)B₂O₃ glasses, with Y = 0.00, 0.12, 0.16, 0.20, 0.25, 0.30. Measurements of the molar volumes indicate that the incorporation of rubidium ions leads to a considerable expansion of the network, which is not observed for sodium ions. The glass-transition temperature increases with increasing alkali content and reaches a maximum near Y = 0.25 for both glass systems. These trends are attributed to changes in the glass network. For each glass composition an Arrhenius-activated increase of the product of dc conductivity and temperature is observed. The activation enthalpy decreases with increasing number density of ions. A comparison between the binary sodium- and rubidium-borate glasses from this work, with the ternary sodium–rubidium borate glasses studied earlier in our laboratory, provides interesting insights in the influence of the glass structure on ionic transport processes and the mixed-alkali effect.     

Studies of lead–iron phosphate glasses by Raman,Mössbauer and impedance spectroscopy

The effect of Fe₂O₃ content on electrical conductivity and glass stability against crystallization in the system PbO–Fe₂O₃–P₂O₅ has been investigated using Raman, XRD, Mössbauer and impedance spectroscopy. Glasses of the molar composition (43.3 − x)PbO–(13.7 + x)Fe₂O₃–43P₂O₅ (0 ⩽ x ⩽ 30), were prepared by quenching melts in the air. With increasing Fe₂O₃ content and molar O/P ratio there is corresponding reduction in the length of phosphate units and an increase in the Fe(II) ion concentration, which causes a higher tendency for crystallization. Raman spectra of the glasses show that the interaction between Fe sites, which is essential for electron hopping, strongly depends on the cross-linking of the glass network. The electronic conduction of these glasses depends not only on the Fe(II)/Fe_tot ratio, but also on easy pathways for electron hopping in a non-disrupted pyrophosphate network. The Raman spectra of crystallized glasses indicate a much lower degree of cross-linking since more non-bridging oxygen atoms are present in the network. Despite the significant increase in the Fe₂O₃ content and Fe(II) ion concentration, there is a considerable weakening in the interactions between Fe sites in crystalline glasses. The impedance spectra reveal a decrease in conductivity, caused by poorly defined conduction pathways, which are result of the disruption and inhomogeneity of the crystalline phases that are formed during melting.     

Structural and magnetic investigations of Fe2O3–TeO2 glasses

A series of tellurite glasses containing Fe₂O₃ with the nominal composition x(Fe₂O₃)–(1−x)(TeO₂), where x = 0.05, 0.10, 0.15, and 0.20, have been synthesized and investigated using X-ray photoelectron spectroscopy (XPS) and magnetization techniques. The Te 3d core level spectra for all glass samples show symmetrical peaks at essentially the same binding energies as measured for TeO₂ indicating that the chemical environment of the Te atoms in these glasses does not vary significantly with the addition of Fe₂O₃. Furthermore, the full-width at half-maximum (FWHM) of each peak does not vary with increasing Fe₂O₃ content which suggests that the Te ions exist in a single configuration, namely TeO₄ trigonal bipyramid (tbp). The O 1s spectra are narrow and symmetric for all compositions such that oxygen atoms in the Te–O–Te, Fe–O–Fe and Te–O–Fe configurations must have similar binding energies. The analysis of the Fe 3p spectra indicates the presence of Fe³⁺ ions only, which is consistent with the valence state of the Fe ions determined from magnetic susceptibility measurements.     

Characterization of B2O3 and/or WO3 containing tellurite glasses

Characterization of B₂O₃ and/or WO₃ containing tellurite glasses was realized in the 0.80TeO₂–(0.20 ? x)WO₃ ? xB₂O₃ system (0 ≤ x ≤ 0.20 in molar ratio) by using differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry techniques. Glasses were prepared with a conventional melt-quenching technique at 750 °C. To recognize the thermal behavior of the glasses, glass transition and crystallization temperatures, glass stability value, glass transition activation energy, fragility parameter were calculated from the thermal analyses. Density, molar volume, oxygen molar volume and oxygen packing density values were determined to investigate the physical properties of glasses. Fourier transform infrared spectra were interpreted in terms of the structural transformations on the glass network, according to the changing B₂O₃ and/or WO₃ content. Crystallization behavior of the glasses was investigated by in situ X-ray diffraction measurements and microstructural characterization was realized by scanning electron microscopy and energy dispersive X-ray spectrometry analyses.     

Structure of binary neodymium borate glasses by infrared spectroscopy

Using fast roller quenching techniques, a new series of binary rare earth oxide borate glasses were synthesized, with general formula xNd₂O₃ + (1 − x)B₂O₃, where x varies up to 35 mol%. The glasses were investigated by using mid infrared reflectance spectroscopy. The results show that the neodymium acts as a modifier, similar to an alkali metal. As x is increased, the borate glass network is shown to change from a three-coordinated to four-coordinated boron system. The results are further investigated by analyzing the spectra in terms of the location of the bands to show how the borate groups change upon neodymium addition.     

Electrical properties of SrBi2(Nb0.7V0.3)2O9−δ in the SrO–Bi2O3–0.7Nb2O5–0.3V2O5–Li2B4O7 glass system

Glasses in the system (100 − x)Li₂B₄O₇–x(SrO–Bi₂O₃–0.7Nb₂O₅–0.3V₂O₅) (where x = 10, 30 and 50, in molar ratio) were fabricated via melt quenching technique. The compositional dependence of the glass transition (T_g) and crystallization (T_cr) temperatures was determined by differential thermal analysis. The as-quenched glasses on heat-treatment at 783 K for 6 h yielded monophasic crystalline strontium bismuth niobate doped with vanadium (SrBi₂(Nb_0.7V_0.3)₂O_9−δ (SBVN)) in lithium borate (Li₂B₄O₇ (LBO)) glass matrix. The formation of nanocrystalline layered perovskite SBVN phase was preceded by the fluorite phase as established by both the X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The dielectric constants for both the as-quenched glass and glass–nanocrystal composite increased with increasing temperature in the 300–873 K range, exhibiting a maximum in the vicinity of the crystallization temperature of the host glass matrix. The electrical behavior of the glasses and glass–nanocrystal composites was characterized using impedance spectroscopy.     

Fast ion conducting phosphate glasses and glass ceramic composites: Promising materials for solid state batteries

Fast ion conducting (FIC) phosphate glasses and glass ceramic composites have gained considerable importance due to their potential applications in the fabrication of solid-state batteries and other electrochemical devices. We, therefore, present an overview on various types of FIC glasses and glass ceramic composites. Silver phosphate glasses doped with different weight percent of lithium chloride (1, 5, 10 and 15 wt.%) were synthesized by melt quenching technique. The Ag₂O–P₂O₅–(15 wt.%) LiCl glass exhibited the maximum electrical conductivity (σ = 8.91 × 10^? 5 S cm^? 1 at room temperature and 4.16 × 10^? 3 S cm^? 1 at 200 °C). Using this glass as an amorphous host material, glass–ceramic composites of Ag₂O–P₂O₅–(15 wt.%) LiCl:xAl₂O₃ (x = 5–50 wt.%) were prepared. The ionic transference number, electrical conductivity, ionic mobility and carrier ion concentration of the synthesized samples were measured. Ag₂O–P₂O₅–(15 wt.%) LiCl:(25 wt.%) Al₂O₃ composite system exhibited the maximum σ value (σ = 3.32 × 10^? 4 S cm^? 1 at room temperature and 2.88 × 10^? 2 S cm^? 1 at 200 °C ). Solid‐state batteries using undoped Ag₂O–P₂O₅ glass, Ag₂O–P₂O₅–(15 wt.%) LiCl glass and glass ceramic composite containing 25 wt.% Al₂O₃ as electrolytes were fabricated. The open circuit voltage (OCV) values and discharge time of these cells were measured and compared. It is found that the glass ceramic composites show enhanced ionic conduction, better OCV value and discharge characteristics.