Ultrafast nonlinear optical properties of Bi2O3-B2O3-SiO2 oxide glass

The ultrafast nonlinear optical properties of Bi₂O₃-B₂O₃-SiO₂ oxide glass were investigated using a femtosecond optical Kerr shutter (OKS) at wavelength of 800 nm. The nonlinear response time of this Bi₂O₃-doped glass was measured to be <90 fs. The nonlinear refractive-index n₂ was estimated to be 1.6 × 10⁻¹⁴ cm²/W. Measurements for the dependence of Kerr signals on the polarization angle between the pump and probe beams showed that the Kerr signals induced by 30-fs pulse laser arose mainly from the photoinduced birefringence effect.     

Enhanced nonlinear optical responses in metal-glass nanocomposites

The “engineered” nonlinear nanocomposite materials with extremely large values of optical Kerr susceptibility and fast temporal responses that can be precisely tuned to satisfy the requirements of switching applications is of current interest in photonics. Metal quantum-dot composite glasses can exhibit enhanced optical susceptibility, χ⁽³⁾, whose real and imaginary parts are related to the intensity-dependent refractive index and two-photon absorption coefficient, respectively. Classical (dielectric) and quantum confinement effects come into play in the nonlinear optical responses of these nanocomposites. Metal nanocluster-glass composites have been synthesized by 200 keV Cu⁺ and 1.5 MeV Au⁺ ion implantations in fused silica glasses at a dose of 3 × 10¹⁶ ions/cm², followed by thermal annealing in reducing atmosphere to promote cluster growth. UV-Visible spectroscopy has revealed prominent linear absorption bands at characteristic surface plasmon resonance (SPR) frequencies signifying appreciable formation of copper and gold colloids in glass matrices. Third-order optical properties of the composite materials have been studied by Z-Scan and Anti-Resonant Interferometric Nonlinear Spectroscopy (ARINS) measurements. The sign of nonlinear refraction is readily obtained from the Z-Scan signatures. The ARINS technique utilizes the dressing of two unequal-intensity counter-propagating pulsed light beams with differential nonlinear phases, which occur upon traversing the sample if it exhibits nonlinear optical response. This difference in phase manifests itself in the intensity-dependent transmission. The nonlinear refractive index, nonlinear absorption coefficient, the real and imaginary parts of the third-order optical susceptibility have been extracted.     

Au-Cu nanoparticles in silica glass as composite material for photonic applications

In the framework of metal nanocluster composite glasses for photonic application, (gold + copper)-containing silica films were synthesized by radiofrequency co-sputtering deposition technique by varying the Au/Cu ratio. To obtain the formation of metallic (alloy) nanoclusters, the deposited samples were annealed in reducing atmosphere at 900 °C. The linear and nonlinear optical properties of the composite glasses were investigated. In particular, the nonlinear ultrafast optical response was measured by means of the Z-scan technique at a wavelength of 527 nm with single 6 ps pulse configuration. Significant refractive and absorptive effects were observed in all the annealed samples. The two main figures of merit related to the performance of materials for optical switching device application were evaluated for all samples, showing interesting values for the Cu-rich composites.     

Polarization dependence of optical Kerr effect in metallophthalocyanine-doped inorganic-organic hybrid materials

Ultrafast optical Kerr effect of metallophthalocyanine-doped inorganic-organic materials was investigated using a femtosecond optical Kerr shutter at wavelength of 800 nm. Experimental results showed that the dependence of the Kerr signals on the polarization angle between the pump beam and the probe beam could be controlled by changing the pump-probe intensity ratio. The pump-intensity dependence of the polarization characters of the Kerr signals probably arose from the contribution of light induced transient grating (LITG) to the Kerr signals.     

Third-order nonlinear optical properties of GeSe2-Ga2Se3-PbI2 glasses

The third-order nonlinear optical (NLO) properties of new selenium-based GeSe₂-Ga₂Se₃-PbI₂ glasses have been measured using the optical Kerr effect (OKE) technique, with picosecond and femtosecond laser pulses. The 0.70GeSe₂-0.15Ga₂Se₃-0.15PbI₂ glass has the largest third-order optical nonlinear susceptibility in GeSe₂-Ga₂Se₃-PbI₂ glass system with χ⁽³⁾ of 5.28×10¹² esu. In addition, the response time of glasses is sub-picosecond, which is predominantly associated with electron cloud. Local structure of the glasses has been identified by using Raman studies, while the origins of the observed nonlinear optical response are discussed. The [Ge(Ga)Se₄] tetrahedral and lone-pair electrons from highly polarizable Pb atom in glasses play an important role in enhanced NLO response. These results as well as their good chemical stability indicate that GeSe₂-Ga₂Se₃-PbI₂ glasses are promising materials for photonic applications of third-order nonlinear optical signal processing.     

Third-order nonlinear optical response in transparent solids using ultrashort laser pulses

The third-order optical nonlinearity, χ ⁽³⁾, is measured in transparent glasses (BK7 and fused silica) and crystals (BaF₂ and quartz) using 36-fs, 800-nm laser pulses and the optical Kerr gate (OKE) technique; values are found to lie in the range 1.3–1.7×10^-14 esu, in accordance with theoretical estimates. We probe the purely electronic response to the incident ultrashort laser pulse in fused silica and BK7 glass. In BaF₂ and quartz, apart from the electronic response we also observe contribution from the nuclear response to the incident ultrashort pulses. We observe oscillatory modulations that persist for ～400 fs. The response of the media (glasses and crystals) to ultrashort pulses is also measured using two-beam self-diffraction; the diffraction efficiency in the first-order grating is measured to be in the range of 0.06–0.13 %. Third harmonic generation due to self-phase matching in the transient grating geometry is measured as a function of temporal delay between the two incident ultrashort pulses, yielding the autocorrelation signal.     

Identification of optical nonlinearities of dye-doped nematic and polymer-dispersed liquid crystals using Z-scan technique

This study investigates the nonlinear optical properties of azo-dye-doped nematic and polymer-dispersed liquid crystal (ADDPDLC) films with nano-sized LC droplets using the Z-scan technique, which is a simple but powerful technique for measuring the optical Kerr constants of materials. The results indicate that the optical Kerr constant (n₂) of the azo-dye-doped nematic LC (ADDLC) film is large because of the photoisomerization effect and the thermal effect. Therefore, the optical Kerr constant of this material can be modulated by varying the temperature of the sample and the direction of polarization of incident laser. The range of n₂ modulated is from −5.26 × 10⁻³ to 1.62 × 10⁻³ cm²/W. The optical Kerr constants of ADDPDLC films at various temperatures are also measured. The experimental results reveal that liquid crystals in the ADDPDLC film strengthen the nonlinearity. The n₂ of the ADDPDLC film is maximal at ∼35 °C, because of the decrease in the clearing temperature of the ADDPDLC films. The clearing temperatures of the liquid crystals (E7), and the ADDPDLC film used in this work were found to be 61 °C and 43 °C, respectively.     

Theoretical study of implementing an all-optical analogue-to-digital conversion based on the Mach-Zehnder interferometric configurations

A new technique of ultrafast analogue-to-digital (A-D) conversion for an all-optical data processing is proposed. This technique is based on the Kerr nonlinearity-induced cross-phase modulation in single-mode Mach-Zehnder interferometer configurations arranged in a specific way. Two schemes, capable of realizing both sequential and parallel A-D conversions of optical signals are considered. The potential for an extremely high-bit-rate processing, up to 1 THz in each converter, is due to a femtosecond time response of Kerr effect in fused silica glass. Optical schemes of proposed devices are presented and algorithmically estimated; their functional capabilities are discussed.     

Longitude magneto optical Kerr effect of Fe/GaAs (0 0 1) with Al overlayers

The longitude magneto optical Kerr effect (LMOKE) is investigated on ultrathin Fe film grown on GaAs (0 0 1) substrate with Al overlayer. The formula of the longitude magneto optical Kerr effect is derived to find out the influence of the Al overlayer on the magneto optical properties of Fe/GaAs (0 0 1) sample. Results obtained from this formula fit very well with the experimental data. The change of the Kerr rotation as a function of the incident angle is also given, which can be used to find a proper angle in sample measurement. A numerical simulation was carried out to find out the relation between Kerr rotation and optical properties of the overlayer. Results from this simulation can be used to select the best overlayer material to protect the Fe/GaAs (0 0 1) sample.     

Synthesis and characterization of Ce doped silica (SiO2) nanoparticles

A series of silica doped with different mol percentages of Ce³⁺ concentration was synthesized using a sol-gel method to determine the dependence of photoluminescence wavelengths and intensity on the concentrations of the dopants. Sol-gel glasses are porous networks that have been densified through chemical processing and heat treatment. Rare-earths (REs) are insoluble in silica; due to this insolubility RE ions in silicate glasses enter as network modifiers and compete for non-bridging oxygen in order to complete their coordination. The morphological, structural, thermal and optical properties of the phosphors were characterized by X-ray diffraction, scanning electron microscopy, UV-vis absorption, photoluminescence, thermogravimetric analyses and differential scanning calorimeter. Silica (SiO₂) gel containing Ce³⁺ ions was sputter coated with Au (gold) in order to monitor surface morphology of the samples. The highest emission intensity was found for the sample with a composition of 0.5 mol% Ce³⁺. Cerium doped silica glasses had broad blue emission corresponding to the ²D_3/2-²F_J transition at 448 nm but exhibited apparent concentration quenching above concentrations of 0.5 mol% Ce³⁺.     

Broadband four-wave optical parametric amplification in bulk isotropic media in the ultraviolet

We report on four-wave optical parametric amplification of the ultrashort ultraviolet light pulses in bulk fused silica and CaF₂. Exact phase-matching in these isotropic media is achieved by means of non-collinear interaction with cylindrical beam focusing. Four-wave optical parametric amplifier efficiently operates in the UV spectral range with 1-ps laser pulses, delivering amplified signal energy exceeding 50 μJ using millijoule pump pulses in the visible (527 nm). Results of scanning of the parametric gain profile suggest that broad amplification bandwidth as wide as ∼20 nm (at FWHM) under these experimental settings is achieved, which might support amplification of sub-10-fs ultraviolet pulses with central wavelength around 330 nm. It is also shown experimentally and verified theoretically that the parametric gain profile exposes a distinct inhomogeneity and its bandwidth notably broadens due to effects of self- and cross-phase modulation imposed by the intense pump beam.     

Large Kerr effect in bulk Se-based chalcogenide glasses

High-speed optical communication requires ultrafast all-optical processing and switching capabilities. The Kerr nonlinearity, an ultrafast optical nonlinearity, is often used as the basic switching mechanism. A practical, small device that can be switched with ~1-pJ energies requires a large Kerr effect with minimal losses (both linear and nonlinear). We have investigated theoretically and experimentally a number of Se-based chalcogenide glasses. We have found a number of compounds with a Kerr nonlinearity hundreds of times larger than silica, making them excellent candidates for ultrafast all-optical devices.     

Ultrafast motion of liquids C2H4Cl2 and C2H4Br2 studied with a femtosecond laser

Transient optical Kerr effect of liquids C₂H₄Cl₂ and C₂H₄Br₂ is investigated, for the first time to our knowledge, with a femtosecond (fs) probe laser delayed with respect to a coherent fs pump laser. Coherent coupling and electronic Kerr signals are observed around zero delay when pump and probe overlap. Persisting after the pump-probe overlap are Kerr signals arising from the torsional and other intramolecular vibrations of the trans and gauche conformations; Kerr signals arising from the intermolecular motion are also observed. Vibrational quantum interference is only observed in liquid C₂H₄Br₂ and the related beats data are fitted with the torsional vibrations, 91 cm⁻¹ (gauche) and 132 cm⁻¹ (trans), and the CCBr angle-bending vibrations, 231 cm⁻¹ (gauche) and 190 cm⁻¹ (trans), with dephasing times, 0.45 ps, 0.45 ps, 2 ps, and 1.5 ps, respectively. These vibrational frequencies agree with those obtained in the frequency-domain. That no vibrational mode is observed for C₂H₄Cl₂ might be attributed to ineffective Raman-pumping. Kerr signals observed after the pump-probe overlap are Fourier transformed to give the spectra of the intermolecular motion and the vibrational spectrum, which agrees with the one observed in the infrared absorption and/or Raman scattering heretofore.     

Ge-Ga-Cd硫化物玻璃的超快三阶非线性光学性质与结构关系研究

本文采用飞秒时间分辨光学克尔门技术测量了GeS2-Ga2S3-CdS硫化物玻璃体系的超快三阶非线性光学响应，所用激光波长分别为820nm和640nm。?实验结果证明了GeS2-Ga2S3-CdS组分玻璃具有很大的飞秒超快三阶非线性光学响应，另外，其Kerr信号随摩尔组分的不同呈显著变化。通过拉曼光谱结构分析，探讨了此系列硫化物玻璃的三阶非线性光学性质与结构的关系，结果表明构成玻璃网络的四面体结构单元[GeS4]([GaS4])对其超快三阶光学非线性起重要作用。实验还表明了此硫化物玻璃体系的超快三阶非线性不符合半经验的Miller定律。     

Structure dependence of ultrafast third-order optical nonlinearity for GeS2-In2S3-CsI chalcohalide glasses

Ultrafast third-order nonlinear optical responses of GeS₂-In₂S₃-CsI chalcohalide glasses have been measured by using the femtosecond time-resolved optical Kerr effect (OKE) technique at a wavelength of 820 nm. The third-order nonlinear susceptibility was estimated to be as large as 5.12×10⁻¹³ esu. The full width at half maximum of the Kerr signal was 120 fs and its response was dominantly assigned to the ultrafast distortion of the electron cloud. The relationship between the structural units and the third-order nonlinear optical responses was analysed by Raman spectra. It is suggested that the covalent bonds of S-Ge or S-In constituting the tetrahedral units [GeS_4/2] or [InS_4−xI_x], respectively, play an important role in the ultrafast third-order nonlinear optical responses of these chalcohalide glasses.     

Preparation and the optical nonlinearity of surface chemistry improved titania nanoparticles in poly(methyl methacrylate)-titania hybrid thin films

With 800-nm, 120-fs laser pulses, optical nonlinearity has been studied in a series of thin films containing poly(methyl methacrylate) (PMMA), filled with surfactant acetylacetone (Acac) capped TiO₂ nanoparticles, which were synthesized by a simple in situ sol-gel/polymerization process, assisted by spin coating and multi-step baking. The resulting nanohybrid thin films have highly optical transparency and demonstrate a unique nonlinear optical (NLO) response. The highest nonlinear refractive index (n₂) is observed up to 6.55 × 10⁻² cm² GW⁻¹ in the nanohybrid thin film of 60 wt% Ti(OBu)₄ in PMMA, with a negligible two-photon absorption (TPA), as confirmed by the Z-scan technique. The titanium precursor loading combined with the nature of the capping molecules are used to influence the ability of nanoparticles to nonlinear optical response. Indeed, the ligands at the nanoparticles’ surface can not only control the extent of the interaction between the organic molecules and the embedded nanoparticles but also influence the optical nonlinearities of nanoparticles.     

富勒烯有机-无机杂化材料的非共珍三阶非线性光学特性

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术（Optical Kerr Shutter,OKS）对富勒烯有机-无机杂化材料的飞秒超快非线性特性进行了实验研究.获得270 fs的开关时间,所得的富勒烯有机-无机杂化材料的三阶非线性系数χ(3)约为4.5×10－14 esu,比C60分子的三阶非线性系数χ(3)高一个数量级.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明：30 fs的超短激光脉冲激发富勒烯有机-无机杂化材料的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

Nonlinear optical properties of Cu nanoclusters by ion implantation in silicate glass

Metal nanocluster composite glass prepared by 180 keV Cu ions into silica with dose of 1 × 10¹⁷ ions/cm² has been studied. The microstructural properties of the nanoclusters were analysed by optical absorption spectra and transmission electron microscopy (TEM). Third-order nonlinear optical properties of the nanoclusters were measured at 1064 nm and 532 nm excitations using Z-scan technique. The nonlinear refraction index, nonlinear absorption coefficient, and the real and imaginary parts of the third-order nonlinear susceptibility were deduced. The mechanisms responsible for the nonlinear response were discussed. Absolute third-order nonlinear susceptibility χ⁽³⁾ of this kind of sample was determined to be 2.1 × 10⁻⁷ esu at 532 nm and 1.2 × 10⁻⁷ esu at 1064 nm, respectively.     

Gaussian soliton generation using a 1.3 μm optical pulse in a micro-ring resonator for a new DWDM enhancement

We present a novel system of a Gaussian soliton generation using a 1.30 μm optical pulse in a nonlinear micro-ring resonator system, which can be used to form the soliton pulse trains within the new wavelength band. By using the suitable parameters, the soliton pulse trains with the center wavelength at 1.30 μm can be generated after the intense Gaussian pulse is input into the nonlinear micro-ring resonator system. The initial pulse bandwidth is enlarged and the signal amplified by the nonlinear Kerr effects type within the ring resonator. The simulation values are used associating with the practical device parameters, whereas the obtained results have shown that the wavelength enhancement of the center wavelength can be achieved. Furthermore, the maximum soliton output power of 12 W is obtained, which is available to perform the long-distance communication link. The common problem of soliton dispersion is minimized by the zero dispersion condition in this case. The major advantage of the proposed system is that the dense wavelength division of the center wavelength with the spectral width of 7.0 pm (10⁻¹⁵ m) and the free spectrum range of 400 pm can be generated and achieved. This is available for the used/installed wavelength enhancement, which can provide more available channel capacity in the existed public optical network.     

Measurement of nonlinear properties and optical limiting ability of Rhodamine6G doped silica and polymeric samples

The third order nonlinear optical properties of Rhodamine6G (Rh6G) doped silica and polymeric samples have been investigated using single beam z-scan technique under excitation by the second harmonic of Nd:YAG laser beam (532 nm). The nonlinear refractive index, nonlinear absorption coefficient, real and imaginary parts of third order nonlinear susceptibility in the samples of silica and poly-methylmethacrylate (PMMA) matrices are measured. Thermal contribution to the nonlinear refractive index in case of undoped silica samples has been calculated in order to have better accuracy of the material response contribution to third order nonlinearity. The comparative study of the optical limiting performance of Rh6G doped silica and polymeric samples show that Rh6G doped silica is relatively superior for optical limiting applications.