New high negative dispersion photonic crystal fiber

A new high negative dispersion photonic crystal fiber is proposed. It has double-core structure. The inner core has a circle germanium-doped region. The outer core is formed by removing the 3rd ring air-holes around the core. There are two ring air-holes between the two cores, Diameter of the 1st ring air holes is bigger than that of the 2nd ring air-holes, this can make mode coupling between inner mode and outer mode and showed that the high negative PCF is the result of this structure characteristics. There are honeycomb photonic lattice in the PCF's cladding. The influence of the structure parameters deviated from the design those on the chromatic dispersion are evaluated. When the structure parameters Λ=1.50 μm, d_core=2.10 μm, d₁=0.90 μm, d₂=0.44 μm and d₃=1.04 μm, the dispersion coefficient D is −1320 ps/(nm·km) at 1550 nm. This is a new kind of chromatic dispersion compensation PCF.     

A broadband ultra flattened chromatic dispersion microstructured fiber for optical communications

A double-cladding microstructured fiber (MF) is proposed in this paper. The inner cladding of this optical fiber is composed of elliptical air holes and silica. The dependence of dispersion on the diameter of the air holes, the pitch, and the axes of the elliptical holes is investigated numerically. The proposed fiber possesses an ultra flattened dispersion curve over a wide wavelength range, and its dispersion value is small. The effective mode area is approaching to 60 μm², and the confinement loss is as low as <0.025 dB/km at 1550 nm. While choosing suitable structure parameters, an ultra dispersion-flattened MF within a broadband from1000 nm to 1900 nm can be achieved. The dispersion fluctuation is 0.6-1.0 ps/(nm·km) in all S, C and L band.     

Design of high duty ratio nonlinear photonic crystal fiber with near-zero flattened dispersion after 1.205 μm

The paper presents a high nonlinear photonic crystal fiber (HN-PCF) with highly duty ratio for time-stretch analog-to-digital conversion (TSADC). The simulation results show that a nonlinear of 42.26 W⁻¹ km⁻¹ and the flattened dispersion of less than 1.0 ps/(nm km) are obtained in more than 495 nm waveband (1205–1700 nm). Owing to its high nonlinear coefficient and flattened dispersion, the high nonlinear PCF is expected to be suitable for supercontinuum (SC) generation. The numerical simulation results demonstrate that the proposed high duty ratio HN-PCF can generate wideband SC.     

Dispersion-ultra-flattened square-lattice photonic crystal fiber with small effective mode area and low confinement loss

Proposed in this paper is a simple square-lattice photonic crystal fiber (PCF) with nearly zero flattened dispersion (NZFD) over a wide wavelength span. We make a trade-off between the coupling efficiency and the effective mode area in order to obtain relatively low confinement loss and high nonlinearity. Via full-vector finite element method with hybrid edge/node elements, over 1137–1710 nm, the dispersion coefficient is 0.3 ± 0.3 ps/(km nm), the confinement loss is relatively low, in level of 10⁻⁷–10⁻⁴ dB/km and the effective mode area remains 5.88–6.59 μm².     

Maintaining single polarization and dispersion compensation with modified rectangular microstructure optical fiber

In this paper, we propose and numerically demonstrate a highly birefringent microstructure optical fiber which shows negative dispersion coefficient of about −288 to −550 ps/(nm km) covering S to L wavelength bands and −425 ps/(nm km) at the excitation wavelength 1550 nm. This proposed design successfully compensate the dispersion covering S to L communication bands ranging from 1460 to 1625 nm along with relative dispersion slope (RDS) perfectly matched to that of single mode fiber of about 0.0036 nm⁻¹. Apart from dispersion compensation, the designed MOF offers high birefringence of 2.94 × 10⁻² at 1550 nm and better compensation ratio with design simplicity due to circular air-holes in the fiber cladding.     

Design and analysis of novel highly nonlinear photonic crystal fibers with ultra-flattened chromatic dispersion

The present article describes novel highly nonlinear photonic crystal fibers (HN-PCFs) with flattened chromatic dispersion and low confinement losses. The proposed design has been simulated based on the finite-difference method with anisotropic perfectly matched layers absorbing boundary condition. It is proved that the design novel HN-PCFs is obtained a nonlinear coefficient greater than 45 W⁻¹ km⁻¹ and low dispersion slope −0.009 ps/(nm².km) at 1.55 μm wavelength. In addition, results from numerical simulation show that the ultra-flattened dispersion of 0 ± 0.65 ps/(nm.km) can be obtained in a 1.36-1.62 μm wavelength range with confinement losses lower than 10⁻⁷ dB/m in the same wavelength range. Another advantage of the proposed HN-PCFs is that it possessed modest number of design parameters.     

一种新型高非线性色散平坦光子晶体光纤结构

提出了一种新的高非线性色散平坦光子晶体光纤结构,引入了一个衡量非线性和色散平坦的品质因子δ。采用平面波展开法,研究了气孔尺寸对光子晶体光纤色散特性和非线性的影响。新结构在第一圈空气孔的中间插入六个附加小孔,使得光子晶体光纤有更小的有效模场面积,提高了光纤的非线性。通过控制第一圈和第三圈空气孔以及附加小孔的直径,使得该光子晶体光纤在大约330 nm的波长范围内,光纤的色散系数介于±0.5 ps/(km.nm)之间,在大约230nm的波长范围内,光纤的色散系数介于±0.1 ps/(km.nm)之间,在大约200 nm的波长范围内,光纤的色散系数D的值介于±0.05 ps/(km.nm)之间。光纤的有效模场面积为2.26μm2。衡量非线性和色散平坦的品质因子δ=11.8 ps.W/μm2。     

Design and analysis of novel octagonal photonic crystal fiber with F-doped elliptical hole core

A design of octagonal photonic crystal fiber (OPCF) with F-doped elliptical hole core is proposed. The proposed design is simulated through an full vector finite element method (FVFEM) and anisotropic perfectly matched layers (APML). Numerical results show that the designed OPCF has the ultra-flattened dispersion of 0 ± 0.4 ps/(nm km) from 1.34 μm to 1.72 μm (380 nm band) which covers S, C and L communication bands, a low confinement loss of less than 10⁻⁷ dB/m in the same wavelength range, and the corresponding birefringence and nonlinear coefficient are about 2.12 × 10⁻² and 50.67 W⁻¹ km⁻¹ at 1.55 μm, respectively. The proposed OPCF may have great potential applications in super-continuum (SC) generation, dispersion compensation, polarization maintaining and so on.     

Design and characterization of single mode circular photonic crystal fiber for broadband dispersion compensation

In this paper, we present a single mode circular photonic crystal fiber (C-PCF) for broadband dispersion compensation covering 1400 to 1610 nm wavelength band over the telecommunication windows. Investigations of guiding properties are carried out using finite element method (FEM) with circular perfectly matched layer boundary condition. Numerical study reveals that a negative dispersion coefficient of about −386.57 to −971.44 ps/(nm km) is possible to obtain over the wavelength ranging from 1400 to 1610 nm with a relative dispersion slope (RDS) of about 0.0036 nm⁻¹ at 1550 nm wavelength. In addition, the single mode behaviour of C-PCF is demonstrated by employing V parameter. According to simulation, it is found that the proposed C-PCF acts as a single mode fiber within 1340 to 1640 nm wavelength. Moreover, effective dispersion, relative dispersion slope, birefringence and confinement loss are also presented and discussed.     

Design of single polarization single mode dispersion compensating photonic crystal fiber

In this paper, we present a photonic crystal fiber based on hexagonal structure for improved negative dispersion as well as high birefringence in the telecom wavelength bands. It is demonstrated that it is possible to obtain negative dispersion coefficient of −712 ps/(nm km) and relative dispersion slope (RDS) perfectly match to that of single mode fiber (SMF) of about 0.0036 nm⁻¹ at the operating wavelength 1550 nm. The proposed fiber exhibits high birefringence of the order 2.11 × 10⁻² with nonlinear coefficient about 57.57 W⁻¹ km⁻¹ at 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest.     

Design of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber

We propose a new structure of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber （PCF）. Through optimizing the diameters of the first two inner rings of air-holes and the GeO2 doping concentration of the core, the nonlinear coefficient is up to 47 W^-1.km^-1 at the wavelength of 1.55 um and nearly-zero flattened dispersion of ±0.5 ps/（nm·km） is achieved in the telecommunication window （1460 - 1625 nm）. Due to the use of GeO2-doped core, this innovative structure can offer not only a large nonlinear coefficient and broadband nearly-zero flattened dispersion but also low leakage losses.     

Polarization maintaining large nonlinear coefficient photonic crystal fibers using rotational hybrid cladding

In this paper, we present and explore a new hybrid cladding design for improved birefringence and highly nonlinear photonic crystal fibers (PCFs) in a broad range of wavelength bands. The birefringence of the fundamental mode in such a PCF is numerically analyzed using the finite element method (FEM). It is demonstrated that it is possible to design a simple highly nonlinear hybrid PCF (HyPCF) with a nonlinear coefficient of the about 46 W⁻¹ km⁻¹ at a 1.55 μm wavelength. According to simulation, the highest modal birefringence and lowest confinement loss of our proposed structure at the excitation wavelength of λ = 1.55 μm can be achieved at a magnitude of 1.77 × 10⁻² and of the order less than 10² dB/km with only five rings of air-holes in the fiber cladding.     

Broadband dispersion compensation of conventional single mode fibers using microstructure optical fibers

This paper presents a microstructure optical fiber for dispersion compensation in a wide range of wavelengths. The finite-element method with perfectly matched absorbing layers boundary condition is used to investigate the guiding properties. The designed novel dispersion compensating fiber shows that it is possible to obtain a larger negative dispersion coefficient of about −130 to −360 ps/(nm km), better dispersion slope compensation, better compensation ratio, and lower confinement losses less than 10⁻² dB/km in the entire telecommunication (1400–1600 nm) band by using a modest number of design parameters and very simple cladding design.     

Characteristics analysis of extruded elliptical hole photonic crystal fibers with square air-core

An extruded elliptical hole photonic crystal fibers PCF with square air-core is proposed. By using a full vector finite-element method FV-FEM and anisotropic perfectly matched layers APML, the structure and optical properties of the proposed PCF are analyzed. Simulation results show that the birefringence of the proposed photonic crystal fiber can be up to the order of 10⁻², and has a flattened dispersion from 1.20 μm to 1.80 μm. The proposed PCF may have important application in super-continuum SC generation, dispersion compensation, fiber-optic sensing systems and other aspects.     

一种新型混合双包层光子晶体光纤的色散特性研究

以多极法理论为基础,设计了一种混合双包层结构的光子晶体光纤.通过改变其五层空气孔的四个结构参数（内层空气孔直径、外层空气孔直径、六边形孔间距和八边形孔间距）,理论上实现了色散绝对值在144—20 μm的波段内变化仅为125 ps·km^-1·nm^-1的平坦色散特性.在此情况下对其损耗进行了数值模拟,使所设计的光纤在144—20 μm的宽波段范围内具有小于0005 dB/km的低限制损耗特性. 关键词： 光子晶体光纤 多极法 平坦色散 限制损耗     

Large negative dispersion in dual-concentric-core photonic crystal fiber with hybrid cladding structure based on complete leaky mode coupling

Considering the optical stability of solution, the sugar-solution is infused into the outer core ring of dual-concentric-core photonic crystal fiber (DCCPCF). The influences of structure parameters and solution concentration on the phase and loss matching are comprehensively analyzed. By choosing the appropriate outer core mode to completely couple with the inner core fundamental mode, the large negative dispersion PCF around 1.55 μm is designed, which has the dispersion value of − 39,500 ps/km/nm as well as bandwidth of 7.4 nm and effective mode area of 28.3 μm². The designed PCF with hybrid cladding structure can effectively compensate the positive dispersion of conventional single mode fiber, and suppress the system perturbation caused by a series of nonlinear effects. Considering the mode field mismatching between the DCCPCF and the tapered fiber, the calculated connection loss around 1.55 μm is below 3 dB. In addition, the equivalent propagation constants of two leaky modes are deduced from the coupled-mode theory, and the complete mode coupling case can be well predicted by comparing the real and imaginary parts of propagation constants.     

Dispersion and polarization properties of elliptical air-hole-containing photonic crystal fibers

In this paper, we investigate the dispersion and polarization properties of photonic crystal fiber with one ring or more rings of elliptical air-holes using plane-wave expansion (PWE) method. By introducing three rings of elliptical air-holes, PCF with ultra-low and ultra-flattened dispersion is designed and a total dispersion curve between ±0.5 ps/nm/km from 1315 to 1855 nm wavelength range is demonstrated. Furthermore, the polarization property of these elliptical air-hole-containing PCFs is analyzed and the variation of the birefringence with the area and ellipticity of the elliptical air-holes are discussed.     

Supercontinuum generation in square photonic crystal fiber with nearly zero ultra-flattened chromatic dispersion and fabrication tolerance analysis

This paper presents a simple index-guiding square photonic crystal fiber (SPCF) where the core is surrounded by air holes with two different diameters. The proposed design is simulated through an efficient full-vector modal solver based on the finite difference method with anisotropic perfectly matched layers absorbing boundary condition. The nearly zero ultra-flattened dispersion SPCF with low confinement loss, small effective area as well as broadband supercontinuum (SC) spectra is targeted. Numerical results show that the designed SPCF has been achieved at a nearly zero ultra-flattened dispersion of 0 ± 0.25 ps/(nm·km) in a wavelength range of 1.38 μm to 1.89 μm (510 nm band) which covers E, S, C, L and U communication bands, a low confinement loss of less than 10⁻⁷ dB/m in a wavelength range of 1.3 μm to 2.0 μm and a wide SC spectrum (FWHM = 450 nm) by using picosecond pulses at a center wavelength of 1.55 μm. We then analyze the sensitivity of chromatic dispersion to small variations from the optimum value of specific structural parameters. The proposed index-guiding SPCF can be applicable in supercontinuum generation (SCG) covering such diverse fields as spectroscopy applications and telecommunication dense wavelength division multiplexing (DWDM) sources.     

Design of highly nonlinear dispersion-flattened square photonic crystal fiber for medical applications

In this paper, we report the design of a highly nonlinear dispersion flattened high-index-core square photonic crystal fiber (PCF) for applications in optical coherence tomography (OCT). The finite-difference method with an anisotropic perfectly matched boundary layer is used as a numerical simulation tool. A set of optimized design parameters numerically resulted in a nonlinear coefficient of 79.9W⁻¹ km⁻¹ and a dispersion of −0:186 ps/(nm·km) at a wavelength of approximately 1.06 μm. Owing to its high nonlinear coefficient and flattened dispersion, the PCF is expected to be suitable for broadband supercontinuum generation, which is considered very important in OCT medical applications.     

Numerical investigation and optimization of a photonic crystal fiber for simultaneous dispersion compensation over S + C + L wavelength bands

In this paper, we numerically investigate and optimize the profile of a photonic crystal fiber (PCF) that can eliminate the residual dispersion from the telecom link as well as can provide identical dispersion compensation over S + C + L bands. A full-vectorial finite element method combined with genetic algorithm is used to optimize the fiber’s profile as well as to accurately determine its modal properties. The optimized PCF exhibits a dispersion of −98.3 ps/nm/km with a variance of ±0.55 ps/nm/km from 1.48 μm to 1.63 μm (i.e., over 150 nm bandwidth) and a zero dispersion slope. Macro-bending loss performance of the designed PCF is also studied and it is found that the fiber shows low bending losses for the smallest feasible bending radius of 5 mm. Further, sensitivity analysis has been carried out for the proposed fiber design and it has been found that a ±2% change in the fiber parameters may lead to a ±8% shift of the dispersion from its nominal value.