Optical sorting using an array of optical vortices with fractional topological charge

An array of optical vortices with fractional topological charge is generated using a phase-only Talbot array illuminator and used to sort microparticles. Our theoretical analysis and experimental results reveal that when a particle passes through a fractional vortex array, it will be driven by two forces, intensity-gradient force and phase-gradient force, and the cooperation of these two forces can improve its ability in optical sorting because of the special intensity and phase distribution of the fractional optical vortex array. Larger angle separation could be obtained with moderate laser power.     

Effects of the induced birefringence in photorefractive crystals on speckle optical vortices

In this work, we show that it is possible to change the properties of an optical vortex formed in a speckle pattern by the control of an external electric field applied to a sillenite-type photorefractive material in a non-holographic configuration. To show it, a scheme that allows the recovering of both, the polarization state and the phase distribution of an optical field was implemented. Changes in the polarization state of the light in the neighborhood of the vortex were observed with the application of an external electric field. Likewise, changes in the phase structure around the vortex and displacements of the vortices themselves were measured. These displacements have a fairly linear dependence on the applied field to the photorefractive crystal. Experimental results are qualitatively explained with the theoretical treatment of non-holographic recording in photorefractive crystals.     

Accelerating,guiding, and sub‐wavelength trapping of neutral atoms with tailored optical vortices

Single neutral atom mechanics is controllable by focused, high‐intensity optical vortices. The intensity‐dependent, laser‐driven motion of the atom's active electrons subsumes to a net transfer of the orbital angular momentum of the light to the neutral atom. The ponderomotive force on these electrons translates so into an unbounded or a bounded radial drift of the atom depending on its initial kinetic energy, as set by the temperature. Appropriate combination of laser beams results in sub‐wavelength, dynamical radial traps for tweezing atoms controllably, an effect that can be exploited for atom guiding, structuring, and lithographic applications.

     

Propagation dynamics of optical vortices in Laguerre–Gaussian beams

We have calculated the propagation dynamics of an initial off-axis vortex with topological charge 1 in Laguerre–Gaussian background beams , which are examples of background beams with non-generic dislocation surfaces, on which the real and imaginary parts of the light field are zero. When initially a vortex with broad core (e.g., r-vortex) is embedded in the background beam, the dislocation surfaces are destroyed during propagation and two vortices with opposite charge are created per dislocation surface in planes perpendicular to the propagation direction. For a vortex with narrow core (e.g., point vortex) diffraction is important and leads to the birth of more than two vortices per dislocation surface. These results are also valid for other background beams with dislocation surfaces, e.g., Hermite–Gaussian and Ince–Gaussian beams. We investigated experimentally the spatial evolution of the intensity distribution of an initial off-axis vortex with narrow core and topological charge 1 in background beams. The experimental results are in good agreement with the calculated intensity distributions.     

Splitting and rotating of optical vortices due to non-circular symmetry in amplitude and phase distributions of host beams

Discussed is the dynamics of optical vortices carrying multi-topological charges, which are nested in optical envelopes with non-circular symmetric amplitudes and phases. As a result of the non-circular symmetry either in amplitudes or in phases, the vortices can split in pairs from the centers of the host beams. During the splitting process of every constituent vortex, its carried integer charges evolve into fractional ones. Furthermore, the overall rotations of the host optical envelopes are found to happen in the splitting process. The theoretical results may find potential applications in beam shaping and engineering.     

利用衍射光栅探测涡旋光束轨道角动量态的研究进展

涡旋光束是一种携带有轨道角动量的光束,在光学扳手、光通信、旋转探测等领域具有重要的应用价值.由于轨道角动量态是涡旋光束的特征值,因此如何探测光束的轨道角动量态分布至关重要.国内外学者已经提出了多种探测涡旋光束的技术,如干涉法、衍射光栅法、多普勒分析法、超材料表面法等.这些技术中,衍射光栅测量法较为简单易行,应用较广.本综述主要介绍了几种当前利用衍射光栅测量涡旋光束轨道角动量态的主流方法,同时也介绍了如何利用衍射光栅来测量光束的轨道角动量谱.     

Remarkable ability of spiral orthogonal zone plate in generating various focused optical vortices

We propose an amplitude spiral orthogonal zone plate (ASOZP) as a Cartesian-based spiral zone plate for generating variety of optical vortices. The presented model is made by overlapping closely a vertical spiral one-dimensional zone plate and a horizontal one. We demonstrate that the element produces diversity of focused vortices, in a way that the vorticity and number of the produced vortices could be easily manipulated. In addition, the generated vortices show rotation features in the vicinity of the focal plane. Furthermore, it is demonstrated that diffraction efficiency of the model is much more higher than the previously introduced Cartesian-based elements. We finally verify numerical results by experimental studies.     

Surface detection and 3D profilometry for microstructure using optical metrology

A surface detection or 3D profilometry for microstructure (millimeter size) based on the project grating method and phase measurement techniques is presented in this paper. The advantages of this technique are simple measuring apparatus, full field and almost real-time testing. The principle and theoretical analysis of the measuring sensitivity are described and four application examples including a calibration example are also presented in this paper. Further improvement and probable applications in electronic industry are also discussed.     

Sum-frequency mixing of optical vortices in nonlinear crystals

Results of theoretical and experimental investigation of the influence of walk-off on sum-frequency mixing of optical vortices in nonlinear crystals are presented. Various phenomena of vortex interaction such as decay of higher order vortices into singly charged vortices, formation of aligned arrays of vortices perpendicular to walk-off direction, particle-like pulling and pushing of vortices, and appearance of pairs of vortices having opposite charges were observed.     

Measuring the topological charge of an optical vortex by using a tilted convex lens

We demonstrate, analytically and experimentally, a simple, but effective method to determine the topological charge of an optical vortex by using a spherical bi-convex lens, a ubiquitous optical element found in any optics laboratory. Just by tilting the lens and recording the intensity distribution of a propagating vortex at a predicted position past the lens, we have been able to measure both the sign and the magnitude of the topological charge m   up to m=±14$m=\pm 14$. Our experimental results are in excellent agreement with analytical predictions.     

Data detection for the P-SLAM optical data storage system

This paper presents an intersymbol interference (ISI) and system noise analysis of the P-SLAM (parallel-sub-lambda) optical data storage system. Data are stored in sub-wavelength features accessed by transmitting light through the structure and collecting optical power measurements in the near-field. The non-linear ISI caused by the interactions of light between these features is characterized using finite-difference time-domain (FDTD) simulations. A system noise analysis is also presented that quantifies the effects of imperfections in fabrication and material properties. Previously, the authors proposed a detection scheme that dealt with the non-linear ISI by physically reducing it with air gaps. In this paper a signal processing method, the Viterbi algorithm, is proposed to overcome ISI. A modification is proposed to the Viterbi algorithm that is designed to deal with both the non-linear ISI and system noise. System simulations are used to show the uncoded bit error rate of the system is similar to current technologies. Conservative predictions estimate a data density of 5 Gbits/cm² for the system which exceeds densities achievable by current optical technologies.     

多阶光盘系统中帧同步信号的自适应检测

多阶光存储是提高光盘存储容量和数据传输率的重要途径。帧同步信号在多阶光盘的重放系统中起着很重要的作用。分析了实际多阶存储系统中帧同步信号的特征和信号检测的特点,提出了一种自适应检测帧同步码的方法。实验结果表明,该方法的精度可以满足系统的需求。     

A multi-parameter sensor system using concentric core optical fiber

We, for the first time, report an experimental demonstration of multi-parameter fiber sensor system using the concentric core optical fiber, which can simultaneously determine the stress, the position of stress and the cracks. A high bending-sensitive concentric core optical fiber has been used in a mesh type structure to form the multi-function sensor.     

基于光放大的光纤Fizeau应变传感器频分复用系统

提出了一种可频分复用基于光放大的光纤Fizeau应变传感器的方法，从原理上解决了现有光纤Fabry-Perot传感器固有的两大弱点：信号弱和复用难.利用掺铒光纤的放大作用，既形成宽带光源，又放大了微弱的信号.描述了该应变传感器系统的结构、原理及实验结果.实验表明该复用传感器应变测量精度可达±10με，可满足实际应用的要求. 关键词： 光纤传感器 光纤应变传感器 掺铒光纤 复用     

Generalized optical filters using a nonlinear micro ring resonator system

We present the interesting results of nonlinear behaviors of a soliton pulse within a nonlinear micro ring resonator system, where the optical filter characteristics in terms of frequency, wavelength and time can be functioned by using the chaotic filter within the micro ring resonator system. There are three forms of applications using the chaotic soliton behaviors and optical filter characteristics presented. Firstly, the simultaneous up-link and down-link frequency bands can be filtered and the required frequency bands obtained. Secondly, we propose the simple system of an extremely narrow light pulse generation over the spectrum range, where the required wavelengths can be filtered and obtained. Finally, a simple system of fast light generation by using a soliton pulse circulating in the integrated micro ring devices is proposed. Using such a system, an attosecond pulse and beyond can be easily filtered and obtained.     

一种光纤通信系统中非线性克尔效应抑制新方法

本文从非线性薛定鄂方程出发,提出了一种全光学的相位预加重来抑制非线性克尔效应的新方法,通过在发射端将输入光脉冲的初始相位上叠加一个平方相位值,改变光脉冲的初始相位值,从而提高光脉冲在光纤传输中抗非线性克尔效应能力.通过理论研究,仿真分析以及实验验证了该方法的可行性,实验验证在接收端可以提高误码率2个数量级以上.在长距离大容量光纤通信系统中有很好的应用前景.     

固体浸没透镜光存储的信号探测技术

信号探测是固体浸没透镜成为实用存储技术的一个必需的组成部分。对在该项研究中获得的理论和实验成果进行了介绍。总结了针对固体浸没透镜机理的三维矢量理论 ,对影响信号探测的因素 ,例如头盘间距、盘片结构和光的偏振态等进行了讨论。介绍了基于固体浸没透镜光存储中信号探测的新技术和重要的实验结果。     

Utilization of balanced detection with optical hard-limiters in T/W OCDMA system

In this paper, we utilize optical hard-limiters to further enhance the system performance in balanced detection T/W optical CDMA system. In T/W optical CDMA systems, it had been investigated that the balanced detection scheme is not superior to the OOK scheme because of the adverse impact of beat noise. The employment of optical hard-limiter is an effective way to alleviate the deteriorating effect of beat noise. The carrier-hopping prime code is utilized as signature sequences whose out of phase autocorrelation is zero and the cross-correlation is at most one. Due to the orthogonality of signature sequence, the correlator of shifted version of carrier-hopping prime code is utilized in the receiver. The numerical results reveal that our proposed scheme can greatly reduce the error floor; also it is superior to that using OOK scheme with optical hard-limiter. Most important of all, our proposed scheme has fixed and optimum thresholds which do not vary with system parameters; and this will lead to dynamic estimation of optimal thresholds unnecessary in the receiver.     

Industrial resin inspection for display production using automated fluid-inspection based on multimodal optical detection techniques

The large-scale liquid-crystal display (LCD) industry requires an accurate inspection system for identifying defects, as the LCD quality can be drastically degraded because of defects. In particular, the refractive index of LCD panels can be changed by internal micrometer-range substances, which form as a result of defectiveness and the insufficient solidification of industrial liquid resins. Intrinsically, the defect inspection of the raw materials must be performed prior to the LCD manufacturing process. Thus, optical coherence tomography (OCT) based automated fluid-inspection (AFI) methodology was introduced to demarcate and enumerate the defects in industrial liquid resins and the final product (LCD smartphone). The accuracy of the method was enhanced by implementing an intensity-detection algorithm. Subsequently, the optimal solidification rates of liquid resins were investigated using a fluorescence sensor-based ultraviolet hardening method to prevent the formation of defects between the internal layers of the LCD panel. Therefore, AFI can be implemented as an effective and cost-saving method in the smartphone industry for improving the quality of the final product.     

Generation of optical vortices with tunable intensity modulation

We analyze vortex properties of the optical beams generated by a spiral phase plate (SPP) which cannot modulate the phase of the incident beam range from 0 to 2π nicely, and find that the vortices have intensity modulation (IM) with central bright speckle. We construct an improved SPP to produce high quality optical vortices with definite IM. Theoretical analysis and real experiments show that this improved SPP can be used to produce optical vortices with configurable intensity modulation degree and without central bright spot.