气相色谱/质谱法鉴定黑芝麻中黑色素的结构类型

 为获得天然高分子化合物黑芝麻中黑色素的分子结构信息 ,对其进行碱熔降解 ,然后对降解产物进行硅烷化衍生 ,再利用气相色谱 /质谱联用分析 ,结果发现产物中含有儿茶酚、对苯二酚和儿茶酸 ,从而证明黑芝麻中的黑色素具有儿茶酚型黑色素的结构特征。     

Simple, Rapid, and Sensitive Determination of Odorous Compounds in Water by GC–MS

A gas chromatographic–mass spectrometric method has been developed for rapid and sensitive determination of odorous compounds in water. The water sample (200 mL), at pH 6.5, was extracted with 1 mL pentane in a 250-mL separatory funnel. Fluorobenzene was added to the water sample as internal standard and the solution was mechanically shaken for 5 min and analyzed by GC–MS, with selected ion monitoring, without further concentration or purification steps. The peaks had good chromatographic properties and extraction of the compounds from water resulted in relatively high recoveries with small variations. The detection limits of the assay were 0.1 ng L^–1 for 2-isopropyl-3-methoxypyrazine, 2-isobutyl-3-methoxypyrazine, 2-methylisoborneol, and geosmin, 0.5 ng L^–1 for anisole, and 1.0 ng L^–1 for 2,4,6-trichloroanisole and trans, trans-2,4-heptadienal. Turn-around time was one day for up to approximately 40 samples. The method is simple, convenient, and can be learned easily by relatively inexperienced personnel. It was used to analyze seven odorous compounds in water from Decheung-Lake in Korea, and raw and treated water originating from the same lake. In the summer of 2001 significant levels of anisole (up to 225 ng L^–1) were observed, and geosmin and 2-methylisoborneol were detected at concentrations of up to 23.8 and 26.7 ng L^–1, respectively. 2-Isopropyl-3-methoxypyrazine, 2-isobutyl-3-methoxypyrazine, and trans, trans-2,4-heptadienal levels during that period were not significant. The method can used for simultaneous detection of several odorous compounds in water.     

Determination of tubuloside B by LC‐MS/MS and its application to a pharmacokinetic study in rats

Tubuloside B, a novel neuroprotective phenylethanoid, is a major active constituent of Cistanche tubulosa and Cistanche deserticola. A specific and sensitive liquid chromatography tandem mass spectrometry (LC‐MS/MS) method has been developed and validated for the quantification of tubuloside B in rat plasma. Sample preparation was conducted through a protein‐precipitation extraction with methanol using tubuloside A as internal standard (IS). Chromatographic separation was achieved using a Capcell Pak C₁₈ column (2.0 × 50 mm, 5 μm) with a mobile phase of methanol–10 mm ammonium acetate buffer (70:30, v/v) in an isocratic elution. Mass spectrometry analysis was performed in negative ionization mode with selected reaction monitoring transitions at m/z 665.1 → 160.9 for tubuloside B, and m/z 827.1 → 160.9 for IS. Calibration curves were linear over the range of 1.64–1640 ng/mL for plasma samples samples (R² > 0.990). The lower limit of quantification (LLOQ) was 1.64 ng/mL. The intra‐ and inter‐day accuracy was between 92.3 and 113.0% with the RSD <9.23% at all LLOQ and quality control levels. Finally, this method was successfully applied in the pharmacokinetics study of tubuloside B after intravenous administration.     

An efficient cleanup method coupled with gas chromatography and mass spectrometry for multi‐pesticides residue analysis in complex plant matrices

We aimed to develop an efficient cleanup method for multi‐pesticides residue analysis in complex plant matrices, shallot, ginger, garlic, onion, leek, and celery. Column chromatography was used as the cleanup method and fabricated with florisil and graphitized carbon black as the adsorbents. The amount of the graphitized carbon black adsorbent and the choice of the elution solvent were systematically investigated for exploring the best combination. The target pesticides covered organochlorine, pyrethroid, and organophosphorus pesticides, and were 38 in total. The method validation and comparison were performed to verify its feasibility and advantages in operation convenience and purification efficiency. The method limit of quantitation varied from 0.01 to 0.03 mg/kg, which depends on the pesticides and the sample matrices. The recoveries of the pesticides ranged from 60.5 to 128% (RSD ≤ 19.0%) at the spiked concentration level of 0.01 (or 0.03) mg/kg and 62.9 to 130% (RSD ≤ 13.0%) at 0.1 mg/kg. Compared with the commercial cleanup solid‐phase extraction cartridges, the present adsorbent combination displayed better purification effect and shorter sample pretreatment time, demonstrating potential application prospect in the complex matrix sample analysis.     

Preclinical pharmacokinetic analysis of armillarisin succinate ester in mouse plasma and tissues by LC–MS/MS

A liquid chromatography–tandem mass spectrometry (LC–MS/MS) has been developed and validated to determine the concentration of armillarisin succinate ester in mouse plasma and tissues, used for preclinical evaluation. Bavachin was employed as the internal standard. Separation was performed on a 3.5 µm Zorbax SB‐C₁₈ column (30 × 2.1 mm), with a mobile phase consisting of methanol and aqueous 20 mm ammonium acetate. Both analyte and internal standard were determined using electrospray ionization and the MS data acquisition was via selected ion monitoring in negative scanning mode. Quantification was performed using the transitions m/z 333 → 233 and 323 → 221 for armillarisin succinate ester and internal standard, respectively. The method was validated with respect to linearity, accuracy, precision, recovery and stability. This assay has been successfully applied to a pharmacokinetic and tissue distribution study after intravenous injection of ASE in mouse in a dose of 10 mg/kg. Copyright © 2012 John Wiley & Sons, Ltd.     

Identification of volatile compounds of Atractylode lancea Rhizoma using supercritical fluid extraction and GC–MS

Supercritical fluid was used to extract volatile components from the rhizoma of Atractylode lancea (A. lancea). An orthogonal array design (OAD), L₉ (3)⁴, was employed as a chemometric method for the optimization of the supercritical fluid extraction (SFE) of volatile compounds from the herbal medicine. Four parameters, namely, pressure, temperature, dynamic extraction time, and flow rate of CO₂, were studied and optimized by a three‐level OAD in which the interactions between the parameters were neglected. These compounds were identified according to their retention times and mass spectra by GC–MS. A total of 30 compounds of SFE extracts were identified. Atractylon (8.63%), hinesol (1.44%), β‐eudesmol (6.64%), elemol (0.42%), and atractydin (13.92%) were the major sesquiterpenes identified in A. lancea SFE extracts.     

Method validation and determination of lisdexamfetamine and amphetamine in oral fluid,plasma and urine by LC–MS/MS

Lisdexamfetamine (LDX) is a long‐acting prodrug stimulant indicated for the treatment of attention‐deficit/hyperactivity disorder and binge‐eating disorder symptoms. In vivo hydrolysis of LDX amide bond releases the therapeutically active d ‐amphetamine (d ‐AMPH). Since toxicological tests in biological samples can detect AMPH from the use of some legal medications, efficient methods are needed in order to correctly interpret the results. The aim of this study was to develop and validate an LC–MS/MS method for the simultaneous quantification of LDX and its main biotransformation product AMPH in human oral fluid, plasma and urine. Calibration curve range for both analytes was 1–128 ng/mL in oral fluid and plasma and 4–256 ng/mL in urine, being the lowest concentration the limit of quantification. Accuracy of the determined values of the target analytes for the five control levels ranged from 94.8 to 111.7% for oral fluid, from 91.3 to 100.2% for plasma and from 94.8 to 109.8% for urine. Imprecision for the five control levels did not exceeded 12.8% for oral fluid, 16.2% for plasma and 17.1% for urine. The method developed for the three matrices was validated and was also successfully applied to assess real samples, showing for the first time the detection of LDX in oral fluid.     

Screening for inherited metabolic diseases using gas chromatography–tandem mass spectrometry (GC–MS/MS) in Sichuan,China

The aim of this study was to retrospectively diagnose and confirm inherited metabolic diseases (IMD), from a small population of IMD high‐risk patients, with the aid of gas chromatography–tandem mass spectrometry (GC–MS/MS), technologies yet to be popularized in Sichuan, China. Using GC–MS/MS coupled with clinical diagnosis, we retrospectively analyzed samples of dried blood spots and urine specimen from 183 IMD high‐risk infant patients, who visited the West China Second Hospital of Sichuan University between June 2013 and October 2015. Four out of 183 IMD high‐risk infant patients were finally diagnosed to be IMD positive, among which two patients were identified with phenylketonuria, one with maple syrup urine disease, and 1 with methylmalonic academia. Restrictive diets and other symptomatic treatments were employed to treat the confirmed infant patients whose conditions are still under tracking and there are zero cases of death so far. GC–MS/MS was found to be an efficient and reliable way to detect IMD. It is necessary to apply GC–MS/MS, in addition to other clinical approaches, for diagnosing candidate IMD patients so that the confirmed patients can get medical intervention and timely treatment.     

Determination of d‐limonene in mice plasma and tissues by a new GC–MS/MS method: Comparison of the pharmacokinetics and tissue distribution by oral and inhalation administration in mice

The aim of the present study was to develop a method based on gas chromatography–tandem mass spectrometry (GC–MS/MS) to determine and quantify the d ‐limonene in mouse plasma and tissue samples. This new method was validated for the quantification of d ‐limonene with the linearity ranges 1.0–1000.0 ng/mL (r² > 0.9952) for plasma samples and 5.0–5000.0 ng/g (r² > 0.9940) for tissue samples. The intra‐ and inter‐day assay of precisions in plasma and tissues were <13.4% and the accuracies were within 91.1–105.8%. In the oral/inhalation administration pharmacokinetics and tissue distribution studies, the main pharmacokinetic parameters were the peak concentration = (97.150 ± 34.450)/(4336.415 ± 1142.418) ng/mL, the area under the curve = (162.828± 27.447)/(2085.721 ± 547.787) h ng/mL and the half‐life = (3.196 ± 0.825)/(0.989 ± 0.095) h. The tissue distribution of d ‐limonene in mice after oral/inhalation administration demonstrated a decreasing tendency in different tissues (liver > kidney > heart > lung > spleen).     

Determination of chlorpheniramine in human plasma by HPLC‐ESI‐MS/MS: application to a dexchlorpheniramine comparative bioavailability study

In the present study a fast, sensitive and robust validated method to quantify chlorpheniramine in human plasma using brompheniramine as internal standard (IS) is described. The analyte and the IS were extracted from plasma by LLE (diethyl ether–dichloromethane, 80:20, v/v) and analyzed by HPLC‐ESI‐MS/MS. Chromatographic separation was performed using a gradient of methanol from 35 to 90% with 2.5 mm NH₄OH on a Gemini Phenomenex C₈ 5 μm column (50 × 4.6 mm i.d.) in 5.0 min/run. The method fitted to a linear calibration curve (0.05–10 ng/mL, R > 0.9991). The precision (%CV) and accuracy ranged, respectively: intra‐batch from 1.5 to 6.8% and 99.1 to 106.6%, and inter‐batch from 2.4 to 9.0%, and 99.9 to 103.1%. The validated bioanalytical procedure was used to assess the comparative bioavailability in healthy volunteers of two dexchlorpheniramine 2.0 mg tablet formulations (test dexchlorpheniramine, Eurofarma, and reference Celestamine^®, Schering‐Plough). The study was conducted using an open, randomized, two‐period crossover design with a 2 week washout interval. Since the 90% confidence interval for C_max and AUC ratios were all within the 80–125% interval proposed by ANVISA and FDA, it was concluded that test and reference formulations are bioequivalent concerning the rate and the extent of absorption. Copyright © 2009 John Wiley & Sons, Ltd.     

Bioanalytical technique for determination of tasimelteon in human plasma by LC–MS/MS and its application to pharmacokinetic study in humans

A highly sensitive, specific and rapid liquid chromatography–tandem mass spectrometry technique for the quantification of tasimelteon in human plasma has been developed and validated using tasimelteon‐d₅ as internal standard. Liquid–liquid extraction technique with ethyl acetate was used for extraction of tasimelteon from the plasma. The chromatographic separation was achieved on an Agilent Zorbax, Eclipse, C₁₈ (4.6 × 50 mm, 5 μm) column using a mobile phase of acetonitrile and 0.02% formic acid buffer (85:15, v/v) with a flow rate of 0.5 mL/min. A detailed method validation was performed as per the United States Food and Drug Administration guidelines. The linear calibration curve was obtained over the concentration range 0.30–299 ng/mL. The API‐4000 liquid chromatography–tandem mass spectrometry was operated under multiple reaction monitoring mode during analysis. The validated method was successfully applied to estimate plasma concentration of tasimelteon after oral administration of a single dose of a 20 mg capsule in healthy volunteers under fasting conditions. The maximum concentration of the drug achieved in the plasma was 314 ± 147 ng/mL and the time at which this concentration was attained was 0.54 ± 0.22 h.     

Isomer specific determination of polychlorinated technical mixtures such as polychloronaphthalenes by GC/MS

Summary A procedure has been developed which allows the determination of the concentration and composition of polychlorinated technical mixtures in environmental samples avoiding the use of standard compounds as much as possible. A common MS response of the congeners of each degree of chlorination is assumed and determined by comparison of the FID and MS response of the respective congeners in a technical mixture. A measure for the variability of the assumed common MS response is derived so that its validity is proved in an objective manner. The method presented here allows the isomer specific determination of those polychlorinated technical mixtures in environmental samples which could not so far be determined in this way for lack of standards. The polychlorinated naphthalenes are quoted as illustration and a few data of residues in environmental samples are given.     

A comparative study of biochar,multiwalled carbon nanotubes and graphitized carbon black as QuEChERS absorbents for the rapid determination of six triazole fungicides by UPLC-MS/MS

A rapid, effective and sensitive method to quantitatively determine six fungicide residue was developed using ultra-performance liquid chromatography coupled with tandem mass spectrometry (UPLC–MS/MS). The target compounds were extracted by using acetonitrile and the sorbent used for clean-up in this modified QuEChERS analytical method were biochar, multiwalled carbon nanotubes (MWCNT) and graphitized carbon black (GCB). Results indicated that the MWCNT (10 mg) was the most effective sorbent in removing pigment. This method was validated on spinach, tomato, cucumber, celery, lettuce, rape, pakchoi, romaine lettuce and eggplant matrices spiked at three concentration levels of 0.01, 0.1 and 1 mg kg^?1. It exhibited recoveries between 73.1% and 118.2% with RSD values below 20%. Matrix-matched calibrations were performed with the coefficients of determination >0.9901 between concentration levels of 0.01–1 mg kg^?1. The limit of quantity (LOQ) for six pesticides ranged from 0.0036 to 0.011 mg kg^?1. The developed method was satisfactorily applied to determine pesticide residues in market vegetable samples.     

Sensitive determination of amide herbicides in environmental water samples by a combination of solid‐phase extraction and dispersive liquid–liquid microextraction prior to GC–MS

In this paper, solid‐phase extraction (SPE) in combination with dispersive liquid–liquid microextraction (DLLME) has been developed as a sample pretreatment method with high enrichment factors for the sensitive determination of amide herbicides in water samples. In SPE–DLLME, amide herbicides were adsorbed quantitatively from a large volume of aqueous samples (100 mL) onto a multiwalled carbon nanotube adsorbent (100 mg). After elution of the target compounds from the adsorbent with acetone, the DLLME technique was performed on the resulting solution. Finally, the analytes in the extraction solvent were determined by gas chromatography–mass spectrometry. Some important extraction parameters, such as flow rate of sample, breakthrough volume, sample pH, type and volume of the elution solvent, as well as salt addition, were studied and optimized in detail. Under optimum conditions, high enrichment factors ranging from 6593 to 7873 were achieved in less than 10 min. There was linearity over the range of 0.01–10 μg/L with relative standard deviations of 2.6–8.7%. The limits of detection ranged from 0.002 to 0.006 μg/L. The proposed method was used for the analysis of water samples, and satisfactory results were achieved.     

Rapid Determination of Salicylic Acid in Plant Materials by Gas Chromatography–Mass Spectrometry

Summary Salicylic acid (SA) is a signaling compound in plants such as tobacco, cucumber, and tomato which can induce systemic acquired resistance. In the work discussed in this paper a simple, rapid, and sensitive method was developed for determination of salicylic acid in plant tissues by gas chromatography–mass spectrometry (GC–MS). SA from tomato leaves extracted with 9:1 (v/v) methanol–chloroform was derivatized by use of bis(trimethylsilyl)trifluoroacetamide (BSTFA) under the optimum reaction conditions (120 °C, 60 min). Quantitative analysis by GC–MS was performed in selected ion monitoring (SIM) mode using an internal standard. Procedures for sample preparation and reaction conditions were optimized. Analysis was completed within 2 h. A sensitivity of 10 ng g^–1 fresh weight and a relative standard deviation less than 5.0% for SA in tomato leaves were achieved. The method could be used for investigation of SA in plant tissues to monitor fast responses of plant defense.     

Overcoming interference of plasma phospholipids using HybridSPE for the determination of trimetazidine by UPLC–MS/MS

An improved, precise and reliable ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method has been developed for the quantification of trimetazidine, using trimetazidine‐d8 as the internal standard (IS). Interference owing to plasma phospholipids during sample preparation was overcome using a hybrid solid‐phase extraction–phospholipid ultra cartridge. The mean extraction recovery of trimetazidine (98.66%) and trimetazidine‐d8 (97.63%) from spiked plasma was consistent and reproducible. Chromatographic analysis was performed on a UPLC Ethylene Bridged Hybrid (BEH) C18 (50 × 2.1 mm, 1.7 μm) column with isocratic elution using acetonitrile–5 mm ammonium formate, pH 3.5 (40:60, v/v) as the mobile phase. The parent → product ion transitions for trimetazidine (m/z 267.1 → 181.1) and trimetazidine‐d8 (m/z 275.2 → 181.1) were monitored on a triple quadrupole mass spectrometer with electrospray ionization functioning in the positive multiple reaction monitoring mode. The linearity of the method was established in the concentration range of 0.05–100 ng/mL for trimetazidine. The intra‐batch and inter‐batch accuracy and precision (CV) were 97.3–103.1 and 1.7–5.3%, respectively. Qualitative and quantitative assessment of matrix effect showed no interference of endogenous/exogenous components. The developed method was used to measure plasma trimetazidine concentration for a bioequivalence study with 12 healthy subjects.     

Indirect hydrogen analysis by gas chromatography coupled to mass spectrometry (GC–MS)

Gas chromatography (GC) is an analytical tool very useful to investigate the composition of gaseous mixtures. The different gases are separated by specific columns but, if hydrogen (H₂) is present in the sample, its detection can be performed by a thermal conductivity detector or a helium ionization detector. Indeed, coupled to GC, no other detector can perform this detection except the expensive atomic emission detector. Based on the detection and analysis of H₂ isotopes by low‐pressure chemical ionization mass spectrometry (MS), a new method for H₂ detection by GC coupled to MS with an electron ionization ion source and a quadrupole analyser is presented. The presence of H₂ in a gaseous mixture could easily be put in evidence by the monitoring of the molecular ion of the protonated carrier gas. Copyright © 2013 John Wiley & Sons, Ltd.     

气相色谱/质谱/质谱法分析石油基引燃物

应用Ｖａｒｉａｎ ３８００ ＧＣ／Ｓａｔｕｒｎ ２０００ ＭＳ 气相色谱／质谱联用分析仪（简称ＧＣ／ＭＳ／ＭＳ）对以汽油、煤渍和紫油为引燃物，燃烧聚丙稀化纤地毯和土壤时的模拟现场物品进行了引燃物的检出。发现采用ＧＣ／ＭＳ／ＭＳ方法比用ＧＣ／ＭＳ方法可以较彻底地排队由于柱注失、地毯燃物分解产物、土壤背景产物和地毯增塑剂等引起的干扰，而且可以提高检测灵敏度。详细考察了以不同质荷比的离子作母离子时对ＧＣ     

Characterization of fluvalinate residues in honey by gas chromatography–atomic emission detection and gas chromatography–mass spectrometry

Two hyphenated techniques, gas chromatography–mass spectrometry and gas chromatography–atomic emission detection, have been used to identify the degradation products of the acaricide fluvalinate in a methanol solution of the commercially available formulation Mavrick, as well as in honey from beehives treated with this product. The major degradation products were 2-chloro-4-trifluoromethylaniline (I), methyl 2-[2-chloro-4-trifluoromethylaniline]-3-methylbutanoate (II), N-(2-chloro-4-trifluoromethyl-phenyl)valine (III), and 3-phenoxybenzaldehyde (IV). Fluvalinate in honey is gradually degraded, 3-phenoxybenzaldehyde being the most abundant residue.