The Use of Iron-Enriched Yeast for the Production of Flatbread

The most common cause of iron deficiency is an improperly balanced diet, in which the body’s need for iron cannot be met by absorption of this element from food. Targeted iron supplementation and food fortification may be the main treatments for iron deficiency in the population. However, many iron-rich supplements and foods have low bioavailability of this element. In our study, we used yeast enriched with iron ions to produce flatbread. The yeast cells accumulated iron ions from the medium supplemented with Fe(NO₃)₃·9H₂O, additionally one of the cultures was treated with pulsed electric field in order to increase the accumulation. The potential bioavailability of iron from flatbread containing 385.8 ± 4.12 mg of iron in 100 g dry mass was 10.83 ± 0.94%. All the flatbreads had a moderate glycemic index. There were no significant differences in antioxidant activity against DPPH^• between flatbread with iron-enriched and non-iron-enriched yeast. Sensory evaluation showed that this product is acceptable to consumers since no metallic aftertaste was detected. Iron enriched flatbread can potentially be an alternative to dietary supplements in iron deficiency states.     

Synthesis, crystal structure and magnetic properties of oxo-bridged binuclear iron(III) complex [Fe(phen)2PhCOO]2OCl2·7H2O

An oxo-bridged binuclear iron(III) complex, [Fe(phen)₂PhCOO]₂OCl₂·7H₂O, was synthesized and the crystal structure indicated that two octahedrally coordinated iron(III) ions bridged with oxygen atoms formed a non-linear complex. The bond angle of Fe---O---Fe is 155.6°. The studies of magnetic properties showed that there was strong antiferromagnetic superexchange coupling (J = −80.8 cm⁻) between two S = 5/2 iron(III) ions.     

Highly Porous Carbons Synthesized from Tannic Acid via a Combined Mechanochemical Salt-Templating and Mild Activation Strategy

Highly porous activated carbons were synthesized via the mechanochemical salt-templating method using both sustainable precursors and sustainable chemical activators. Tannic acid is a polyphenolic compound derived from biomass, which, together with urea, can serve as a low-cost, environmentally friendly precursor for the preparation of efficient N-doped carbons. The use of various organic and inorganic salts as activating agents afforded carbons with diverse structural and physicochemical characteristics, e.g., their specific surface areas ranged from 1190 m²·g⁻¹ to 3060 m²·g⁻¹. Coupling the salt-templating method and chemical activation with potassium oxalate appeared to be an efficient strategy for the synthesis of a highly porous carbon with a specific surface area of 3060 m²·g⁻¹, a large total pore volume of 3.07 cm³·g⁻¹ and high H₂ and CO₂ adsorption capacities of 13.2 mmol·g⁻¹ at −196 °C and 4.7 mmol·g⁻¹ at 0 °C, respectively. The most microporous carbon from the series exhibited a CO₂ uptake capacity as high as 6.4 mmol·g⁻¹ at 1 bar and 0 °C. Moreover, these samples showed exceptionally high thermal stability. Such activated carbons obtained from readily available sustainable precursors and activators are attractive for several applications in adsorption and catalysis.     

Investigating Hydrogen Isotope Variation during Heating of n-Alkanes under Limited Oxygen Conditions: Implications for Palaeoclimate Reconstruction in Archaeological Settings

This paper reports on a series of heating experiments that focus on n-alkanes extracted from leaf, bark, and xylem tissues of the Celtis australis plant. These lipid biomarkers were analysed for their compound-specific hydrogen isotopic composition (δ²H_wax) under limited oxygen conditions at 150, 250, 350, and 450 °C. Our results reveal isotopic variations in wax lipids of different plant organs during short-term low-temperature combustion. We conclude that, in the absence of a detailed characterisation of the depositional environment in advance of sampling, δ²H_wax values in archaeological or otherwise highly anthropogenic environments should be interpreted cautiously. In addition, we observed that variation in δ²H_wax of leaves is minimal at temperatures ≤ 350 °C, highlighting the potential for δ²H_wax in thermally altered combustion substrates to yield palaeoclimate information, which could allow researchers to investigate links between archaeological and climatic records at a high spatial and temporal resolution.     

Insertion of Phosphenium Ions into a Bicyclo[1.1.0]Tetraphosphabutane Iron Complex

By reacting [{Cp‴Fe(CO)₂}₂(µ,η^1:1-P₄)] (1) with in situ generated phosphenium ions [Ph₂P][A] ([A]⁻ = [OTf]⁻ = [O₃SCF₃]⁻, [PF₆]⁻), a mixture of two main products of the composition [{Cp‴Fe(CO)₂}₂(µ,η^1:1-P₅(C₆H₅)₂)][PF₆] (2a and 3a) could be identified by extensive ³¹P NMR spectroscopic studies at 193 K. Compound 3a was also characterized by X-ray diffraction analysis, showing the rarely observed bicyclo[2.1.0]pentaphosphapentane unit. At room temperature, the novel compound [{Cp‴Fe}(µ,η^4:1-P₅Ph₂){Cp‴(CO)₂Fe}][PF₆] (4) is formed by decarbonylation. Reacting 1 with in situ generated diphenyl arsenium ions gives short-lived intermediates at 193 K which disproportionate at room temperature into tetraphenyldiarsine and [{Cp‴Fe(CO)₂}₄(µ₄,η^1:1:1:1-P₈)][OTf]₂ (5) containing a tetracyclo[3.3.0.0^2,7.0^3,6]octaphosphaoctane ligand.     

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO₂ sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO₂ adsorption capacity (2.69 mmol CO₂/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.     

Microstructural Evolution and High-Performance Giant Dielectric Properties of Lu3+/Nb5+ Co-Doped TiO2 Ceramics

Giant dielectric (GD) oxides exhibiting extremely large dielectric permittivities (ε’ > 10⁴) have been extensively studied because of their potential for use in passive electronic devices. However, the unacceptable loss tangents (tanδ) and temperature instability with respect to ε’ continue to be a significant hindrance to their development. In this study, a novel GD oxide, exhibiting an extremely large ε’ value of approximately 7.55 × 10⁴ and an extremely low tanδ value of approximately 0.007 at 10³ Hz, has been reported. These remarkable properties were attributed to the synthesis of a Lu³⁺/Nb⁵⁺ co-doped TiO₂ (LuNTO) ceramic containing an appropriate co-dopant concentration. Furthermore, the variation in the ε’ values between the temperatures of −60 °C and 210 °C did not exceed ±15% of the reference value obtained at 25 °C. The effects of the grains, grain boundaries, and second phase particles on the dielectric properties were evaluated to determine the dielectric properties exhibited by LuNTO ceramics. A highly dense microstructure was obtained in the as-sintered ceramics. The existence of a LuNbTiO₆ microwave-dielectric phase was confirmed when the co-dopant concentration was increased to 1%, thereby affecting the dielectric behavior of the LuNTO ceramics. The excellent dielectric properties exhibited by the LuNTO ceramics were attributed to their inhomogeneous microstructure. The microstructure was composed of semiconducting grains, consisting of Ti³⁺ ions formed by Nb⁵⁺ dopant ions, alongside ultra-high-resistance grain boundaries. The effects of the semiconducting grains, insulating grain boundaries (GBs), and secondary microwave phase particles on the dielectric relaxations are explained based on their interfacial polarizations. The results suggest that a significant enhancement of the GB properties is the key toward improvement of the GD properties, while the presence of second phase particles may not always be effective.     

The Influence of Nd and Sm on the Structure and Properties of Sol-Gel-Derived TiO2 Powders

TiO₂ nanopowders modified by Nd and Sm were prepared using the sol-gel technique. It was found by XRD analysis that the samples containing Sm are amorphous up to 300 °C, while those with Nd preserve a mixed organic-inorganic amorphous structure at higher temperatures (400 °C). The TiO₂ (rutile) was not detected up to 700 °C in the presence of both modified oxides. TiO₂ (anatase) crystals found at about 400 °C in the Sm-modified sample exhibited an average crystallite size of about 25–30 nm, while doping with Nd resulted in particles of a lower size—5–10 nm. It was established by DTA that organic decomposition is accompanied by significant weight loss occurring in the temperature range 240–350 °C. Photocatalytic tests showed that the samples heated at 500 °C possess photocatalytic activity under UV irradiation toward Malachite green organic dye. Selected compositions exhibited good antimicrobial activity against E. coli K12 and B. subtilis.     

Mechanochemical Synthesis and Nitrogenation of the Nd1.1Fe10CoTi Alloy for Permanent Magnet

In this work, the mechanochemical synthesis method was used for the first time to produce powders of the nanocrystalline Nd_1.1Fe₁₀CoTi compound from Nd₂O₃, Fe₂O₃, Co and TiO₂. High-energy-milled powders were heat treated at 1000 °C for 10 min to obtain the ThMn₁₂-type structure. Volume fraction of the 1:12 phase was found to be as high as 95.7% with 4.3% of a bcc phase also present. The nitrogenation process of the sample was carried out at 350 °C during 3, 6, 9 and 12 h using a static pressure of 80 kPa of N₂. The magnetic properties M_r, µ₀H_c, and (BH)_max were enhanced after nitrogenation, despite finding some residual nitrogen-free 1:12 phase. The magnetic values of a nitrogenated sample after 3 h were M_r = 75 Am² kg^–1, µ₀H_c = 0.500 T and (BH)_max = 58 kJ·m^–3. Samples were aligned under an applied field of 2 T after washing and were measured in a direction parallel to the applied field. The best value of (BH)_max ~ 114 kJ·m^–3 was obtained for 3 h and the highest µ₀H_c = 0.518 T for 6 h nitrogenation. SEM characterization revealed that the particles have a mean particle size around 360 nm and a rounded shape.     

Structure and Population of Complex Ionic Species in FeCl2 Aqueous Solution by X-ray Absorption Spectroscopy

Technologies for mass production require cheap and abundant materials such as ferrous chloride (FeCl₂). The literature survey shows the lack of experimental studies to validate theoretical conclusions related to the population of ionic Fe-species in the aqueous FeCl₂ solution. Here, we present an in situ X-ray absorption study of the structure of the ionic species in the FeCl₂ aqueous solution at different concentrations (1–4 molL⁻¹) and temperatures (25–80 °C). We found that at low temperature and low FeCl₂ concentration, the octahedral first coordination sphere around Fe is occupied by one Cl ion at a distance of 2.33 (±0.02) Å and five water molecules at a distance of 2.095 (±0.005) Å. The structure of the ionic complex gradually changes with an increase in temperature and/or concentration. The apical water molecule is substituted by a chlorine ion to yield a neutral Fe[Cl₂(H₂O)₄]⁰. The observed substitutional mechanism is facilitated by the presence of the intramolecular hydrogen bonds as well as entropic reasons. The transition from the single charged Fe[Cl(H₂O)₅]⁺ to the neutral Fe[Cl₂(H₂O)₄]⁰ causes a significant drop in the solution conductivity, which well correlates with the existing conductivity models.     

Effect of Physiological Concentrations of Vitamin C on the Inhibitation of Hydroxyl Radical Induced Light Emission from Fe2+-EGTA-H2O2 and Fe3+-EGTA-H2O2 Systems In Vitro

Ascorbic acid (AA) has antioxidant properties. However, in the presence of Fe²⁺/Fe³⁺ ions and H₂O₂, it may behave as a pro-oxidant by accelerating and enhancing the formation of hydroxyl radicals (^•OH). Therefore, in this study we evaluated the effect of AA at concentrations of 1 to 200 µmol/L on ^•OH-induced light emission (at a pH of 7.4 and temperature of 37 °C) from 92.6 µmol/L Fe²⁺—185.2 µmol/L EGTA (ethylene glycol-bis (β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid)—2.6 mmol/L H₂O₂, and 92.6 µmol/L Fe³⁺—185.2 µmol/L EGTA—2.6 mmol/L H₂O₂ systems. Dehydroascorbic acid (DHAA) at the same range of concentrations served as the reference compound. Light emission was measured with multitube luminometer (AutoLumat Plus LB 953) for 120 s after automatic injection of H₂O₂. AA at concentrations of 1 to 50 µmol/L and of 1 to 75 µmol/L completely inhibited light emission from Fe²⁺-EGTA-H₂O₂ and Fe³⁺-EGTA-H₂O₂, respectively. Concentrations of 100 and 200 µmol/L did not affect chemiluminescence of Fe³⁺-EGTA-H₂O₂ but tended to increase light emission from Fe²⁺-EGTA-H₂O₂. DHAA at concentrations of 1 to 100 µmol/L had no effect on chemiluminescence of both systems. These results indicate that AA at physiological concentrations exhibits strong antioxidant activity in the presence of chelated iron and H₂O₂.     

Formation of Catalytically Active Nanoparticles under Thermolysis of Silver Chloroplatinate(II) and Chloroplatinate(IV)

The thermal behaviour of Ag₂[PtCl₄] and Ag₂[PtCl₆] complex salts in inert and reducing atmospheres has been studied. The thermolysis of compounds in a helium atmosphere is shown to occur in two stages. At the first stage, the complexes decompose in the temperature range of 350–500 °C with the formation of platinum and silver chloride and the release of chlorine gas. At the second stage, silver chloride is sublimated in the temperature range of 700–900 °C, while metallic platinum remains in the solid phase. In contrast to the thermolysis of Ag₂[PtCl₆], the thermal decomposition of Ag₂[PtCl₄] at 350 °C is accompanied by significant heat release, which is associated with disproportionation of the initial salt to Ag₂[PtCl₆], silver chloride, and platinum metal. It is confirmed by DSC measurements, DFT calculations of a suggested reaction, and XRD. The thermolysis of Ag₂[PtCl₄] and Ag₂[PtCl₆] compounds is shown to occur in a hydrogen atmosphere in two poorly separable steps. The compounds are decomposed within 170–350 °C, and silver and platinum are reduced to a metallic state, while a metastable single-phase solid solution of Ag_0.67Pt_0.33 is formed. The catalytic activity of the resulting nanoalloy Ag_0.67Pt_0.33 is studied in the reaction of CO total (TOX) and preferential (PROX) oxidation. Ag_0.67Pt_0.33 enhanced Pt nano-powder activity in CO TOX, but was not selective in CO PROX.     

Trace determination of iron on a silicon wafer surface by silicon direct bonding and neutron activation analysis

In order to determine iron on silicon wafer surface at a level of 10¹⁴ atoms·m^–2 the efficiency of a well-type Ge detector for⁵⁹Fe -ray emissions was measured and a low temperature silicon direct bonding technique was developed. With silicon direct bonding at a temperature of 350 to 650°C iron remains near the interface of the bound silicon. The iron contamination of the interface escaped from the interface can be ignored with this technique. The value of iron obtained was (2.7 to 5.9)·10¹⁴ atoms · m^–2 in the surface on silicon wafers.     

Preparation of High-Performance Activated Carbon from Coffee Grounds after Extraction of Bio-Oil

In this study, a new method for economical utilization of coffee grounds was developed and tested. The resulting materials were characterized by proximate and elemental analyses, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and N₂ adsorption–desorption at 77 K. The experimental data show bio-oil yields reaching 42.3%. The optimal activated carbon was obtained under vacuum pyrolysis self-activation at an operating temperature of 450 °C, an activation temperature of 600 °C, an activation time of 30 min, and an impregnation ratio with phosphoric acid of 150 wt.%. Under these conditions, the yield of activated carbon reached 27.4% with a BET surface area of 1420 m²·g⁻¹, an average pore size of 2.1 nm, a total pore volume of 0.747 cm³·g⁻¹, and a t-Plot micropore volume of 0.428 cm³·g⁻¹. In addition, the surface of activated carbon looked relatively rough, containing mesopores and micropores with large amounts of corrosion pits.     

Diffuse reflectance spectra of iron(III) vanadates

The electronic spectra of solid iron(III) vanadates FeVO₄ and Fe₂V₄O₁₃ were investigated by the diffuse reflectance technique in the spectral range 12 500–50 000 cm⁻¹. The spectra of investigated vanadates contain 2–3 intensive CT bands in the UV region and two lowest energy d–d bands in the 12 000–22 000 cm⁻¹ range. The presence of the weak bands for FeVO₄ and Fe₂V₄O₁₃ at 16 500 cm⁻¹ and 20 500 cm⁻¹ points to the lattice deffects (oxygen deficiency and the presence of the V⁴⁺ ions) in the structure of investigated vanadates.     

The electrochemical interface between copper(111) and aqueous electrolytes

The electrochemical double layer between Cu(111) electrodes and aqueous electrolytes (F⁻ and SO²⁻₄ at various pH values) was studied by means of linear scan voltammetry and ac impedance measurements. It is found that electrochemisorption of oxygen species proceeds on the Cu(111) surface in the potential regions more negative than the electrodissolution potential of copper. The adsorption-desorption kinetics are analysed; the anodic and cathodic symmetry coefficients are found to be equal (α = β = 0.3), and the standard rate constant is k° = 4 × 10⁻¹⁰cm s⁻¹.     

Origins of Giant Dielectric Properties with Low Loss Tangent in Rutile (Mg1/3Ta2/3)0.01Ti0.99O2 Ceramic

The Mg²⁺/Ta⁵⁺ codoped rutile TiO₂ ceramic with a nominal composition (Mg_1/3Ta_2/3)_0.01Ti_0.99O₂ was synthesized using a conventional solid-state reaction method and sintered at 1400 °C for 2 h. The pure phase of the rutile TiO₂ structure with a highly dense microstructure was obtained. A high dielectric permittivity (2.9 × 10⁴ at 10³ Hz) with a low loss tangent (<0.025) was achieved in the as-sintered ceramic. After removing the outer surface, the dielectric permittivity of the polished ceramic increased from 2.9 × 10⁴ to 6.0 × 10⁴, while the loss tangent also increased (~0.11). The dielectric permittivity and loss tangent could be recovered to the initial value of the as-sintered ceramic by annealing the polished ceramic in air. Notably, in the temperature range of −60–200 °C, the dielectric permittivity (10³ Hz) of the annealed ceramic was slightly dependent (<±4.4%), while the loss tangent was very low (0.015–0.036). The giant dielectric properties were likely contributed by the insulating grain boundaries and insulative surface layer effects.     

High-Temperature Oxidation Resistance of PDC Coatings in Synthetic Air and Water Vapor Atmospheres

This work is aimed at the development and investigation of the oxidation behavior of ferritic stainless-steel grade AISI 441 and polymer-derived ceramic (PDC) protective coatings. Double-layer coatings of a PDC bond coat below a PDC top coat with glass and ceramic passive fillers’ oxidative resistance were studied at temperatures up to 1000 °C in a flow-through atmosphere of synthetic air and in air saturated with water vapor. Investigation of the oxide products formed at the surface of the samples in synthetic air and water vapor atmospheres, at different temperatures (900, 950, 1000 °C) and exposure times (24, 96 h) was carried out on both uncoated steel and steel coated with selected coatings by scanning electron microscopy (SEM) and X-Ray diffraction (XRD). The Fe, Cr₂O₃, TiO₂, and spinel (Mn,Cr)₃O₄ phases were identified by XRD on oxidized steel substrates in both atmospheres. In the cases of the coated samples, m- ZrO₂, c- ZrO₂, YAG, and crystalline phases (Ba(AlSiO₄)₂–hexacelsian, celsian) were identified. Scratch tests performed on both coating compositions revealed strong adhesion after pyrolysis as well as after oxidation tests in both atmospheres. After testing in the water vapor atmosphere, Cr ions diffused through the bond coat, but no delamination of the coatings was observed.     

Thermodynamic Quantities and Defect Structure of La0.6Sr0.4Co1−yFeyO3−δ(y=0–0.6) from High-Temperature Coulometric Titration Experiments

The partial energies and entropies of O₂in perovskite-type oxides La_0.6Sr_0.4Co_1−yFe_yO_3−δ(y=0, 0.1, 0.25, 0.4, 0.6) were determined as a function of nonstoichiometryδby coulometric titration of oxygen in the temperature range 650–950°C. An absolute reference value ofδwas obtained by thermogravimetry in air. The nonstoichiometry at a given oxygen pressure and temperature decreases with iron contenty. At low nonstoichiometries the oxygen chemical potential decreases withδ. The observed behavior can be interpreted by assuming random distribution of oxygen vacancies, an electronic structure with both localized donor states on Fe, and a partially filled itinerant electron band, of which the density of states at the Fermi level scales with the Co content. The energy of the Fe states is close to the energy at the Fermi level in the conduction band. The observed trends of the thermodynamic quantities can be interpreted in terms of the itinerant electron model only when the iron content is small. At high values ofδthe chemical potential of O₂becomes constant, indicating partial decomposition of the perovskite phase. The maximum value ofδat which the compositions are single-phase increases with temperature.