Analysis and improvement of stability of pepsin-solubilized collagen from skin of carp (Cyprinus carpio)

Pepsin is widely used for the extraction of pepsin-solubilized collagens (PSC) from many resources. PSC-A and PSC-P were prepared from carp skin using 0.1 mol L^?1 acetic acid and 0.02 mol L^?1 Na₂HPO₄ (pH 7.2) as the dialysis solution, respectively. SDS-PAGE patterns showed PSC-A and PSC-P as type I collagens, as well as acid soluble collagen (ASC). When incubated at 40°C, no degradation was observed for ASC, but PSC-A and PSC-P were degraded into short peptides, showing lower stability than ASC. The results indicate that pepsin remaining in the PSCs resulted in their degradation, which was confirmed by the inhibition using pepstatin. This research revealed the behavior of the remaining pepsin in pepsin-solubilized collagens and an approach to the PSC stability improvement was proposed. Chromatography profiles showed that new PSC prepared by the improved method had almost the same stability as ASC.     

Purification and Characterization of Pepsin-Solubilized Collagen from Skin of Sea Cucumber Holothuria parva

Pepsin-solubilized collagen (PSC) was extracted from the skin of sea cucumber Holothuria parva and was fractionally characterized. The PSC from H. parva skin consisted of three α₁ chains (α₁)₃, in contrast to calf skin collagen type I with two α₁ and one α₂ chains (α₁)₂α₂ with approximately 130 kDa each. The maximum transition (T_m) and denaturation temperature (T_d) of PSC were determined to be 46.94 and 32.5 °C, respectively. The amino acid composition analysis revealed that glycine, proline, alanine, and hydroxyproline were the abundant amino acids available in extracted PSC. The results showed that the isolated collagen from H. parva has some similar characteristics to previously reported collagens used in food and pharmaceutical industries.     

Detection and measurement of noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor using multifrequency powder EPR spectroscopy: application to cis-[(NH(3))(2)Pt(1-MeU)(2)Cu(H(2)O)(2)](SO(4)) x 4.5H(2)O (1-MeU = monoanion of 1-methyluracil)

Multifrequency continuous wave EPR spectra (4-34 GHz) on a powder of the title compound are consistent with a spin-triplet state. This arises from interaction between centrosymmetrically related pairs of copper(II) ions in the solid. The spectra at all frequencies have been simulated with a single set of spin-Hamiltonian parameters. The results show that there is noncoincidence between the principal axes of the g-matrices on each copper center and those of the zero-field splitting (D) tensor. This noncoincidence is a single rotation of 33 degrees +/- 2 degrees. The parameters from the powder spectra have been verified by a subsequent single-crystal EPR study which yielded the spin-Hamiltonian parameters g(XX) = 2.074, g(YY) = 2.093, g(ZZ) = 2.385, D(XX) = +/-0.0228 cm(-1), D(YY) = +/-0.0211 cm(-1), D(ZZ) = -/+0.0439 cm(-1) with Euler angles of alpha = 179 degrees, chi = 33.4 degrees, and gamma = 328 degrees. Analysis of the zero-field splitting tensor in terms of exchange indicates that the interaction between the pairs of copper(II) ions is almost entirely dipolar in origin. This study shows that multifrequency EPR spectroscopy on powders, coupled with spectrum simulation, can detect and measure noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor, and does not necessarily require the presence of metal hyperfine interactions.     

Preparation and physicochemical characterization of carbamazepine (CBMZ): para-sulfonated calix[n]arene inclusion complexes

The formation of inclusion complexes with para-sulfonated calix[n]arene (PSC[n]A) was studied for carbamazepine (CBMZ), a poorly water soluble anticonvulsant drug. The effect of PSC[4]A and PSC[6]A on aqueous solubility of carbamazepine was studied extensively. The complete complexation of the drug was achieved after 48 h of shaking with PSC[n]A in water and evaporation of water to get solid complex. The interaction between PSC[n]A and CBMZ in solid state inclusion complexes was accomplished by aqueous phase solubility studies, HPLC, DSC, PXRD, FTIR, UV–Vis, and FT-Raman spectroscopy. The solubility of CBMZ increases as a function of PSC[n]A concentration. The results of the two phase solubility experiments are in good conformity to signify the formation of 1:1 (PSC[6]A:CBMZ) and 2:1 PSC[4]A:CBMZ complexes. The order of dissolution rate of CBMZ is inclusion complex > physical mixture > drug alone. The purpose of this study was to enhance solubility resulting in high dissolution rate and bioavailability of this essentially water insoluble drug.     

Solvent Extraction of Vanadium(V) as a Ternary Complex with N-Hydroxy-N-p-Chlorophenyl-N′-(2-Methyl-5-Chloro)-Phenyl-p-Toluamidine Hydrochloride and p-Chlorophenol

N-Hydroxy-N-p-chlorophenyl-N′-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HCPMCPTH) reacts with vanadium(V) to form a 1:2 (metal:reagent) blue-violet complex which can be quantitatively extracted into chloroform from acetic acid solutions. The deep blue adduct having 1:2:1 (V:HCPMCPTH:PCP) stoichiometry gets quantitatively extracted into chloroform from 0–2.5 M acetic acid media. The formation of the ternary complex has been made the basis for the development of a simple, rapid, sensitive and selective extractive-photometric method for the determination of microamounts of vanadium(V). The method has been applied to the determination of vanadium in steels.     

Simple conditions for the use of ferroin indicator in cerimetric titrations of antimony(III) alone and in mixtures with arsenic(III)

The titration of antimony(III) with cerium(V) sulphate in the presence of ferroin indicator at room temperature is entirely satisfactory in media consisting of 50% ($\text{v}\text{v}$) acetic acid and 1–3 M hydrochloric acid. In the absence of acetic acid, ferroin reacts with the antimony(V) formed in the very early stages, to give a sparingly soluble red complex, which remains in suspension and resists oxidation by cerium(IV). This titration provides a rational method for sequential visual titrations of antimony(III) and arsenic(III). The composition of the ferroin-antimony(V) complex is discussed. Titrations of antimony(III) in 0.5–1 M sulphuric acid medium do not require acetic acid but need iodine monochloride catalyst.     

Stability indicating reversed-phase high-performance liquid chromatographic and thin layer densitometric methods for the determination of ziprasidone in bulk powder and in pharmaceutical formulations

Two sensitive and reproducible methods were developed and validated for the determination of ziprasidone (ZIP) in the presence of its degradation products in pure form and in pharmaceutical formulations. The fi rst method was based on reversed-phase high-performance liquid chromatography (HPLC), on a Lichrosorb RP C(18) column using water:acetonitrile:phosphoric acid (76:24:0.5 v/v/v) as the mobile phase at a fl ow rate of 1.5 mL min(-1) at ambient temperature. Quantification was achieved with UV detection at 229 nm over a concentration range of 10-500 micro g mL(-1) with mean percentage recovery of 99.71 +/- 0.55. The method retained its accuracy in presence of up to 90% of ZIP degradation products. The second method was based on TLC separation of ZIP from its degradation products followed by densitometric measurement of the intact drug spot at 247 nm. The separation was carried out on aluminium sheet of silica gel 60 F(254) using choloroform:methanol:glacial acetic acid (75:5:4.5 v/v/v) as the mobile phase, over a concentration range of 1-10 micro g per spot and mean percentage recovery of 99.26 +/- 0.39. Both methods were applied successfully to laboratory prepared mixtures and pharmaceutical capsules.     

Direct determination of the number of electrons needed to reduce coenzyme F430 pentamethyl ester to the Ni(I) species exhibiting the electron paramagnetic resonance and ultraviolet-visible spectra characteristic for the MCR(red1) state of methyl-coenzyme M reductase

The UV-visible and electron paramagnetic resonance (EPR) spectra of MCR(red1), the catalytically active state of methyl-coenzyme M reductase, are almost identical to those observed when free coenzyme F430 or its pentamethyl ester (F430M) are reduced to the Ni(I) valence state. Investigations and proposals concerning the catalytic mechanism of MCR were therefore based on MCR(red1) containing Ni(I)F430 until, in a recent report, Tang et al. (J. Am. Chem. Soc. 2002, 124, 13242) interpreted their resonance Raman data and titration experiments as indicating that, in MCR(red1), coenzyme F430 is not only reduced at the nickel center but at one of the C=N double bonds of the hydrocorphinoid macrocycle as well. To resolve this contradiction, we have investigated the stoichiometry of the reduction of coenzyme F430 pentamethyl ester (F430M) by three independent methods. Spectroelectrochemistry showed clean reduction to a single product that exhibits the UV-vis spectrum typical for MCR(red1). In three bulk electrolysis experiments, 0.96 +/- 0.1 F/mol was required to generate the reduced species. Reduction with decamethylcobaltocene in tetrahydrofuran (THF) consumed 1 mol of (Cp)(2)Co/mol of F430M, and the stoichiometry of the reoxidation of the reduced form with the two-electron oxidant methylene blue was 0.46 +/- 0.05 mol of methylene blue/mol of reduced F430M. These experiments demonstrate that the reduction of coenzyme F430M to the species having almost identical UV-vis and EPR spectra as MCR(red1) is a one-electron process and therefore inconsistent with a reduction of the macrocycle chromophore.     

ChemInform Abstract: X2Y2 Isomers: Tuning Structure and Relative Stability Through Electronegativity Differences (X: H,Li, Na,F, Cl,Br, I; Y: O,S, Se,Te).

Density functional calculations on XYYX and X₂YY isomers of the X₂Y₂ species (X: H, Li, Na, F, Cl, Br, I; Y: O, S, Se, Te) show that the XYYX isomers are more stable than the X₂YY forms except for X = F and Y = S and Te, for which the F₂SS and F₂TeTe isomers are slightly more stable.     

神经红蛋白突变体(F28Y,F106Y)的构建、 表达与表征

构建了神经红蛋白F28Y, F106Y的两种突变体, 并进行了表达、 纯化和谱学表征. 电喷雾质谱表明突变体蛋白的分子量与理论值一致. 氧化型和还原型F28Y及F106Y的紫外 可见吸收光谱与野生型相似, 仅氧化型F28Y的Soret 带有2 nm的蓝移, 说明这两种突变体蛋白仍保持六配位形式. F28Y的荧光最大发射峰明显红移(340 nm→347 nm), 表明其荧光基团更加暴露于极性环境中. 圆二色光谱表明, 突变体蛋白的α 螺旋含量降低且F28Y产生了β 折叠, 这是由于F28相对于F106则位于疏水腔外部且更加接近于溶剂表面所致. 热稳定性顺序为NGB>F28Y>F106Y, F106Y最不稳定, 是因为其与血红素间存在着较强的疏水作用, 突变使F106与血红素间的作用力减弱, 从而导致血红素在热变性条件下更容易从蛋白中解离出来.     

Evaluation and solubility improvement of Carvedilol: PSC[n]arene inclusion complexes with acute oral toxicity studies

The aqua phobic molecules that are practically insoluble in aqueous media demonstrate a staggeringly slow intrinsic dissolution rate. In this work, we exemplify the utility of calixarenes as a tool to form inclusion complexes with Carvedilol (CDL). It is poorly water soluble drug. CDL is a Biopharmaceutical Classification System (BCS) Class II drug and it is a nonselective β-adrenegenic blocking agent with α1-blocking activity. It is mainly used in the management of hypertension. The maximum complexation of the drug was accomplished after 48?h of stirring with para sulphonato calix[4]arene (PSC[4]arene) and para sulphonato calix[6]arene (PSC[6]arene) in water and evaporation of water to acquire solid complexes. The study includes characterisation of both the complexes—physical mixtures of drug and PSC[4]arene and PSC[6]arenes by different methods like Fourier-transform infra red spectroscopy, differential scanning calorimetry and powder X-ray diffraction, proton nuclear magnetic resonance. This studies shows that there is electrostatic interaction between drug and PSC[n]arenes. The complexation was determined by phase solubility study. The prepared complexes exhibited improved in vitro dissolution profile and decreased in vivo acute oral toxicity compared to the pure drug.     

Ultrasonic Study of Collagen Solutions

Ultrasonic propagation characteristics of collagen solutions are reported. The concentration dependences of the various ultrasonic parameters of the solvent (acetic acid) and the solute (collagen) are compared. The ultrasonic velocities for acetic acid and collagen are comparable, while the attenuation is very high in collagen solutions. The adiabatic compressibility and the free length in collagen solutions decrease with increasing concentration. The relaxation time increases rapidly with concentration of collagen, unlike that for acetic acid.     

X-ray absorption and resonance Raman studies of methyl-coenzyme M reductase indicating that ligand exchange and macrocycle reduction accompany reductive activation

Methyl-coenzyme M reductase (MCR) catalyzes methane formation from methyl-coenzyme M (methyl-SCoM) and N-7-mercaptoheptanoylthreonine phosphate (CoBSH). MCR contains a nickel hydrocorphin cofactor at its active site, called cofactor F(430). Here we present evidence that the macrocyclic ligand participates in the redox chemistry involved in catalysis. The active form of MCR, the red1 state, is generated by reducing another spectroscopically distinct form called ox1 with titanium(III) citrate. Previous electron paramagnetic resonance (EPR) and (14)N electron nuclear double resonance (ENDOR) studies indicate that both the ox1 and red1 states are best described as formally Ni(I) species on the basis of the character of the orbital containing the spin in the two EPR-active species. Herein, X-ray absorption spectroscopic (XAS) and resonance Raman (RR) studies are reported for the inactive (EPR-silent) forms and the red1 and ox1 states of MCR. RR spectra are also reported for isolated cofactor F(430) in the reduced, resting, and oxidized states; selected RR data are reported for the (15)N and (64)Ni isotopomers of the cofactor, both in the intact enzyme and in solution. Small Ni K-edge energy shifts indicate that minimal electron density changes occur at the Ni center during redox cycling of the enzyme. Titrations with Ti(III) indicate a 3-electron reduction of free cofactor F(430) to generate a stable Ni(I) state and a 2-electron reduction of Ni(I)-ox1 to Ni(I)-red1. Analyses of the XANES and EXAFS data reveal that both the ox1 and red1 forms are best described as hexacoordinate and that the main difference between ox1 and red1 is the absence of an axial thiolate ligand in the red1 state. The RR data indicate that cofactor F(430) undergoes a significant conformational change when it binds to MCR. Furthermore, the vibrational characteristics of the ox1 state and red1 states are significantly different, especially in hydrocorphin ring modes with appreciable C=N stretching character. It is proposed that these differences arise from a 2-electron reduction of the hydrocorphin ring upon conversion to the red1 form. Presumably, the ring-reduction and ligand-exchange reactions reported herein underlie the enhanced activity of MCR(red1), the only form of MCR that can react productively with the methyl group of methyl-SCoM.     

An organotransition-metal complex with pentagonal-pyramidal structure

Star gazing: The six-coordinate organoniobium(V) compound [NBu(4) ](2) [NbO(C(6) F(5) )(5) ] has been found to exhibit a pentagonal-pyramidal (PPY-6) structure, which is unprecedented in organotransition-metal chemistry (see picture: complex as viewed down the O-Nb axis; C in gray, O in red, F in yellow, and Nb in blue).     

(Ca1-x-yLuy)MoO4∶xEu3+红色荧光粉的化学共沉淀合成与光致发光

使用NH4HCO3-NH3.H2O混合沉淀剂,采用化学共沉淀法合成(Ca1-x-yLuy)MoO4:xEu3+红色荧光粉,通过XRD、EDS、荧光光谱和CIE色度图研究该荧光粉的晶体结构、成分组成及发光性能。结果表明,实验按照理论化学计量比成功合成了(Ca1-x-yLuy)MoO4:xEu3+红色荧光粉,该荧光粉为CaMoO4白钨矿结构;(Ca1-x-yLuy)MoO4:xEu3+具有7F0→5L6(394 nm)和7F0→5D2(465 nm)的强电子吸收,且在613 nm处可发射高强度红光,其色坐标为(0.666 5,0.332 9),明显优于传统的Y2O2S:Eu3+红色荧光粉;此外,当Lu含量为30mol%时,荧光粉发光强度最佳。     

Synthesis and characterization of a new class of polyfluorinated alkanes: tetrakis(perfluoroalkyl)alkane

The synthesis and physico-chemical characterization of 1,1,2,2-tetrakis(perfluoroalkyl-methylene)ethane {[F(CF₂)_nCH₂]₂CH}₂ (n=6, TK6; n=8, TK8) are reported. The synthesis consists of four steps: (1) addition of allyl alcohol to a perfluoroalkyl iodide, F(CF₂)_nI (n=6,8) to give the corresponding iodo-adduct; (2) dehalogenation of the adduct by treatment with zinc in aqueous acetic acid, yielding 3-perfluoro-n-alkyl-1-propene; (3) addition of 3-perfluoro-n-alkyl-l-propene to perfluoroalkyl iodide, F(CF₂)_nI (n=6,8) to give 1,3-perfluoro-n-alkyl-2-iodo-propane; (4) coupling of 1,3-perfluoro-n-alkyl-2-iodo-propane by zinc in acetic anhydride giving the final products. TK6 and TK8 are characterized by very low surface tension values and exhibit very good properties as potential ski-waxes.     

SYNTHESIS AND REACTIONS OF SOME NEW THIENO[2,3-b]-PYRIDINES AND THE ANTIMICROBIAL EFFECTS

Abstract

3,5-Dicyano-6-mercapto-4-phenylpyridin-2(1H)-one (1) was reacted with ethyl chloroacetate to give compound (II) which on reaction with hydrazine hydrate gave the corresponding hydrazide derivative (III). Acylation of (III) with acetic acid, phenylisocyanate, or phenylisothiocyanate gave different monoacyl derivatives (IV-VI). Condensation of III with aromatic aldehydes and acetylacetone gave compounds VII_a-c, VIII respectively. Compound I was reacted with chloroanilides, bromoacetone and phenacyl bromide to yield the IX-XI; these and compound II gave thieno[2,3-b]-pyridines (XU-XV) on treatment with sodium ethoxide solution. Reaction of XII with acetic anhydride gave the diacetyl derivative XVI. Hydrolysis of compound XII with sodium hydroxide gave the corresponding acid (XVII) which on treatment with acetic anhydride gave the oxazine derivative (XVIII). Reaction of oxazine compound XVIII with ammonium acetate and hydrazine hydrate gave pyrido[3′,2′:4,5] thieno[3,2-d]pyrimidin-4.7-dione derivative (XIX) and (XX) respectively. The N-amino derivative (XX) was reacted with 4-nitrobenzaldehyde to give the corresponding azomethine (XXI).

Significant in vitro gram-positive and gram negative antibacterial activities as well as anti-fungal effect were observed for some members of the series.     

Improvement of some pharmaceutical properties of mycophenolate mofetil (MMF) by para sulphonatocalix[4]resorcinarene inclusion complex

As a part of our investigations to unfold the chemistry of calixresorcinarene, we have focused on the formation of inclusion complex of a poorly soluble (43 μg ml^?1 at pH 7) drug mycophenolate mofetil (MMF) an immunosuppressive agent and an inosine monophosphate dehydrogenase (IMPDH) inhibitor with para sulphonatocalix[4]resorcinarene (PSC4R). The complete complexation of the drug was achieved after 48 h of stirring with para sulphonatocalix[4]resorcinarene(PSC[4]R) in water and evaporation of water yield the solid complex. The interaction between para sulphonatocalix[4]resorcinarene(PSC[4]R) and MMF in solid state inclusion complexes was accomplished by aqueous phase solubility studies, Thermal Analysis, HPLC, PXRD, FT-IR, and UV–Vis spectroscopy. The results of the phase solubility experiments are in good conformity to signify the formation of 2:1 PSC4R: MMF complexes. The purpose of this study was to enhance solubility and resulting in high dissolution rate and bioavailability of this essentially water insoluble drug. The results of the in vivo study shows that there is a remarkable change in the toxicity of the pure drug MMF and complex did not produce any mortality up to 2200 mg kg^?1.     

Protic ionic liquids based on the dimeric and oligomeric anions: [(AcO)xH(x-1)]-

We describe a fluidity and conductivity study as a function of composition in N-methylpyrrolidine-acetic acid mixtures. The simple 1 : 1 acid-base mixture appears to form an ionic liquid, but its degree of ionicity is quite low and such liquids are better thought of as poorly dissociated mixtures of acid and base. The composition consisting of 3 moles acetic acid and 1 mole N-methylpyrrolidine is shown to form the highest ionicity mixture in this binary due to the presence of oligomeric anionic species [(AcO)(x)H(x-1)](-) stabilised by hydrogen bonds. These oligomeric species, being weaker bases than the acetate anion, shift the proton transfer equilibrium towards formation of ionic species, thus generating a higher degree of ionicity than is present at the 1 : 1 composition. A Walden plot analysis, thermogravimetric behaviour and proton NMR data, as well as ab initio calculations of the oligomeric species, all support this conclusion.     

Toluene-sandwiched trinuclear copper(I) and silver(I) triazolates and phosphine adducts of dinuclear copper(I) and silver(I) triazolates

Cu (I) and Ag (I) complexes of the fluorinated triazolate ligand [3,5-(C3F7)2Tz](-) have been synthesized using the corresponding metal(I) oxides and the triazole. They form pi-acid/base adducts with toluene, leading to [Tol][M3][Tol] ([Tol]=toluene; [M3]={[3,5-(C3F7)2Tz]Cu}3 or {[3,5-(C3F7)2Tz]Ag}3) type structures. Packing diagrams show the presence of extended chains of the type {[Tol][M3][Tol]}infinity, but the intertoluene ring distances are too long for significant pi-arene/pi-arene contacts. These copper and silver triazolates react with PPh3 (at a 1:1 metal ion/P molar ratio), leading to dinuclear {[3,5-(C3F7)2Tz]Cu(PPh3)}2 and {[3,5-(C3F7) 2Tz]Ag(PPh3)}2. They feature a six-membered Cu(mu-N-N) 2Cu or Ag(mu-N-N)2Ag core with a boat conformation.