A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

A coumarin-based fluorescent probe for selective detection of Cu2+ in water

Fluorescent Red GK, a commercially available coumarin-based dye, was developed as a “turn-off” fluorescent probe for detection of Cu²⁺ in aqueous solution. It exhibited high selectivity and sensitivity at room temperature. Upon addition of Cu²⁺, the strong fluorescence of Fluorescent Red GK was severely quenched and its color changed from orange to colorless under illumination with a UV lamp; the color of the solution also changed from pink to colorless. So, it can be used as a specific colorimetric and fluorescent probe for Cu²⁺ with a detection limit as low as 0.0634?μM.     

Highly selective chromogenic and fluorogenic probe based on benzothiazole-thiosemicarbazone Schiff base for detection of copper (II) in real samples

Copper is the third most abundant essential transition metal ion in the human body. It's responsible for important activities in many living things, but excessive intake of Cu²⁺ can lead to a range of diseases. A colorimetric and turn-off fluorescent probe (E)-2-(5-(benzothiazol-2-yl)-2-(diethylamino)-4-hydroxybenzylidene)-N-phenylhydrazine-1-carbothioamide ( ZTR ) was designed and synthesized by thiosemicarbazone Schiff base as a specific complexes site strategy to achieve highly specific Cu²⁺ detection. The fluorescence of the probe ZTR solution fell dramatically when Cu²⁺ was added, and its appearance changed from dazzling blue to nearly colorless. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of Cu²⁺ in the linear range from 0 to 0.12 μM, with a detection limit down to 16 nM, and with high selectivity for Cu²⁺ over 15 other metal ions. Job’s plot analysis showed that probe ZTR and Cu²⁺ formed a 1:1 coordination complex. In addition, because of its low detection limits and fast response time, the created fluorescent molecule was effectively used to study the target ions on test paper strips and in water samples.))     

A fluorescent probe for copper and hypochlorite based on rhodamine hydrazide framework

A rhodamine derivative (1) was synthesized as a fluorescence turn-on probe for copper (Cu²⁺) and hypochlorite (ClO^?). The probe gave a fluorescence turn-on change at 587 nm with a color change from colorless to pink in the presence of Cu²⁺ or ClO^? ions in aqueous solution. It was found that the Cu²⁺ ion bound to 1 in a 1:1 stoichiometry and induced a spirolactam ring opening of the rhodamine moiety leading to a fluorescence turn-on, confirmed by Job’s plot, ESI-Mass, and ¹H NMR analyses. In the presence of ClO^? ion, probe 1 underwent a hypochlorite-mediated oxidation and hydrolysis to produce a ring-opened rhodamine B with a fluorescence enhancement. However, these changes were not monitored in case of other metal ions, anions, and reactive redox species. In addition, probe 1 can readily react with the ClO^? to provide a distinct fluorescence enhancement along with a pink color even in the presence of various competitive species.     

Cu nanoclusters-based ratiometric fluorescence probe for ratiometric and visualization detection of copper ions

Copper is a highly toxic environmental pollutant with bioaccumulative properties. Therefore, sensitive detection of Cu²⁺ is very important to prevent over-ingestion, and visual detection is preferred for practical applications. In this work, we developed a simple and environmental friendly approach to synthesize hyperbranched polyethyleneimine-protected copper nanoclusters (hPEI-Cu NCs) with great stability against extreme pH, high ionic strength, thiols etching and light illumination, which were then conjugated to the surface of silica coated CdSe quantum dots (QDs) to design a ratiometric fluorescence probe. In the presence of different amounts of Cu²⁺ ions, the fluorescence of Cu NCs can be drastically quenched, while the emission from QDs stayed constant to serve as a reference signal and the color of the probe changed from yellow-green to red, resulting in ratiometric and visualization detection of Cu²⁺ ion with high accuracy. The detection limit for Cu²⁺ was estimated to be 8.9 nM, much lower than the allowable level of Cu²⁺ in drinking water (∼20 μM) set by U.S. Environmental Protection Agency. Additionally, this probe can be also applied for the determination of Cu²⁺ ion in complex real water samples.     

A Significant Fluorescence Turn-On Probe for the Recognition of Al3+ and Its Application

An easy prepared probe, BHMMP, was designed and synthesized, which displayed a significant fluorescence enhancement (over 38-fold) and obvious color change in the recognition of Al³⁺. The binding ratio of probe BHMMP to Al³⁺ was determined as 1:1, according to Job plot. The binding mechanism was fully clarified by the experiments, such as FT-IR spectrum, ESI–MS analysis, and ¹H NMR titration. A DFT study further confirmed the binding mode of BHMMP to Al³⁺. The limit of detection (LOD) for Al³⁺ was determined as low as 0.70 µM, based on the fluorescence titration of BHMMP. Moreover, the results from real sample experiments, including real water samples, test papers, and cell images, well-demonstrated that BHMMP was capable of sensing Al³⁺ in environmental and biological systems.     

Fluorometric sensing of Cu ion with smart fluorescence light-up probe, triazolylpyrene (Py)

We report the detection of Cu²⁺ ion with fluorescence light-up probe, triazolylpyrene (^TNDMBPy). Thus, the probe showed a remarkable fluorescence enhancement of both of the monomer and excimer emissions and a 2:1 probe-Cu²⁺ complexation with high selectivity, high stability constant and low detection limit. Formation of the excimer was also rationalized on the basis of DFT calculation. Our probe is also capable of sensing SDS micelle-encapsulated-Cu²⁺ ion in aqueous media with high association constant, thus, showing its practical utility. Thus, our probe could be used as an efficient Cu²⁺ ion selective fluorescence light-up probe, and may find applications in chemical and biological systems.     

A fluorescent probe based on N-butylbenzene-1,2-diamine for Cu(II) and its imaging in living cells

A fluorescent probe LZ-N with naphthalimide as fluorophore and N-butylbenzene-1,2-diamine as a new recognition moiety for copper ion was designed and synthesized. The probe LZ-N exhibits high selectivity for Cu²⁺ ion in aqueous media (CH₃CN:H₂O = 1:1) over all the other metal ions in our study, more than 20-fold fluorescence enhancement by coordinating with Cu²⁺, and the maximum emission intensity independence in the range of pH 2.06–9.25. The results of ¹H-NMR titration, time-resolved fluorescence decay measurement, and computational optimization illuminate the mechanisms of Cu²⁺ and probe LZ-N. Confocal fluorescence images and cell viability values test show the high fluorescence enhancement of probe LZ-N for exogenous Cu²⁺ in living cells.     

Carbazole‐based colorimetric and fluorescent probe for Cu2+ and its utility in bio‐imaging and real water samples

A new carbazole functionalized Schiff base CBM was synthesized and characterized. CBM can selectively recognize Cu²⁺ via UV–vis and fluorescence signal among common biologically relevant metal ions. When Cu²⁺ was added to CBM, there was a significant enhancement at the maximum absorption wavelength of 393 nm and with a distinct blue shift. The maximum emission peak was significantly attenuated by a factor of about 15 times at 535 nm and the blue shift of emission wavelength was observed. When other metal ions were added, there was no remarkable change at the maximum absorption and emission peak. Under the illumination of 365 nm ultraviolet lamp, the color of the CBM solution changed from light blue to dark blue after the addition of Cu²⁺. The combination mechanism of CBM with Cu²⁺ was nicely explored by density functional theory studies. The probe CBM has good cell permeability, fluorescence electron microscopy experiments show that CBM can be used as a fluorescent probe to detect the presence or absence of Cu²⁺ in Hela cells. Furthermore, the probe CBM can also be used for the detection of copper ions in actual water samples.     

A highly sensitive naphthalimide-based fluorescent probe for detection of Cu2+ via selective hydrolysis reaction and its application in practical samples

A novel fluorescent probe CN3, containing 1,8-naphthalimide and picolinate units, was synthesized, and its structure was characterized by ¹H nuclear magnetic resonance spectroscopy (H NMR), ¹³C nuclear magnetic resonance spectroscopy (C NMR), and mass spectroscopy techniques. The detection property of CN3 toward copper ions (Cu²⁺) has been investigated in ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) solution by UV–Vis absorption and fluorescence emission spectra. The results showed that CN3 had a highly selective and sensitive fluorescence quenching response to Cu²⁺, which was attributed to the generation of weak fluorescent N-ethyl-4-hydroxyphenyl-1,8- naphthalimide (compound 2) in polar ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) via selective hydrolysis reaction. The detection of CN3 for Cu²⁺ was not influenced in the presence of other competing metal ions, and the limit of detection was as low as 50.0 nM. Therefore, the color of CN3 changed from colorless to yellowish when the Cu²⁺ was added. Furthermore, the fluorescent probe CN3 was utilized to detect Cu²⁺ in real water samples with fine performance.     

A new coumarin-based fluorescence turn-on chemodosimeter for Cu in water

A highly selective and sensitive coumarin-based chemodosimeter 1 for Cu²⁺ in water is reported in this work. 1 was designed and facilely synthesized by a one-step reaction with coumarin as a fluorophore and 2-picolinic acid as the binding moiety, which showed very week fluorescence in buffer solution, and its fluorescence was considerably enhanced by the addition of Cu²⁺ at room temperature in 5 min. Mechanism study suggested that Cu²⁺ promoted the hydrolysis of 1 via the catalytic sensing cycle, generating a highly fluorescent product 7-hydroxycoumarin with fluorescence signal greatly amplified. The probe exhibited remarkably selective fluorescence enhancement to Cu²⁺ over other metal ions at 454 nm, with a detection limit of 35 nM Cu²⁺. Under optimal condition, 1 was successfully used for the determination of Cu²⁺ in fetal equine serum and two water samples.     

Naphthalene and pyrrole substituted guanidine in selective sensing of Cu2+, Hg2+, Pb2+ and CN− ions under different conditions

Naphthalene and pyrrole substituted guanidine 1 has been designed and synthesised. Compound 1 efficiently distinguishes Cu²⁺, Hg²⁺ and Pb²⁺ ions by exhibiting different responses in fluorescence. While compound 1 exhibited turn-on emission selectively in the presence of Hg²⁺ and Pb²⁺ ions in CH₃CN and CH₃CN–H₂O (1:1, v/v), respectively, it showed decrease in emission upon interaction with Cu²⁺ ion in CH₃CN. Furthermore, the Cu-1 ensemble has been established as a potential probe for selective detection of CN^? ion over a series of other anions involving colour change (in ordinary light: colourless to light yellow and under UV light: colourless to sky blue). Theoretical insight has been invoked to understand the mode of metal–ligand interaction.     

A Novel Naked-Eye and Dual-Channel Responsive Fluorescent Probe for Cu2+ Based on 3,4-Disubstituted-1,8-naphthalimide

A new 3,4-disubstituted-1,8-naphthalimide derivative H1 was designed and synthesized as a selective fluorescent probe for Cu²⁺ over miscellaneous metal ions in aqueous media. Upon mixing with Cu²⁺ in CH₃OH:H₂O (1:1, volume ratio), the increase of fluorescence intensity and a bathochromic shift of absorbance of H1 could be observed with a notable color response (changing from yellow to pink). Furthermore, Cu²⁺ coordinates to the probe H1 and a 1:1 metal-ligand complex was formed.     

Characterization of rhodamine B hydroxylamide as a highly selective and sensitive fluorescence probe for copper(II)

Rhodamine B hydroxylamide (1) is characterized as a highly selective and sensitive fluorescence probe for Cu²⁺. Under the optimized conditions, the probe exhibits specific absorbance-on and fluorescence-on responses to Cu²⁺ only. This remarkable property may allow Cu²⁺ to be detected directly in the presence of the other transition metal ions, and such an application has been demonstrated to human serum. The reaction mechanism is also investigated and proposed as that the hydroxylamide group of 1 binds Cu²⁺, and the subsequent complexation of Cu²⁺ displays a high catalytic activity for the hydrolytic cleavage of the amide bond, causing the release of fluorophore (rhodamine B) and thereby the retrievement of absorbance and fluorescence. The recovered fluorescence intensity is proportional to the concentration of Cu²⁺ in the range 1-20 μM. The detection limit for Cu²⁺ is 33 nM (k = 3). The reaction mechanism described here may be useful for developing excellent spectroscopic probes with cleavable active bonds for other analytes.     

A compact fluorescence/circular dichroism dual-modality probe for detection,differentiation, and detoxification of multiple heavy metal ions via bond-cleavage cascade reactions

Selective detection of multiple analytes in a compact design with dual-modality and theranostic features presents great challenges. Herein, we wish to report a coumarin-thiazolidine masked d-penicillamine based dual-modality fluorescent probe COU-DPA-1 for selective detection, differentiation, and detoxification of multiple heavy metal ions (Ag⁺, Hg²⁺, Cu²⁺). The probe shows divergent fluorescence (FL) /circular dichroism (CD) responses via divergent bond-cleavage cascade reactions (metal ion promoted C-S cleavage and hydrolysis at two distinctive cleavage sites): FL “turn-off” and CD “turn-on” for Ag⁺ (no hydrolysis), FL “turn-on” and CD “turn-off” for Hg²⁺ (imine hydrolysis), and FL “self-threshold ratiometric” and CD “turn-off” for excess Cu²⁺ (lactone and imine hydrolysis), providing the first example of a fluorescence/CD dual-modality probe for multiple species with complimentary responses. Moreover, the bond-cleavage cascade reactions also lead to the formation of d-penicillamine heavy metal ion complexes for potential detoxification treatments.     

A novel colorimetric and fluorescent chemosensor: synthesis and selective detection for Cu and Hg

A novel two-channel metal ion sensor has been synthesized from macrocyclic dioxotetraamine and 1,8-naphthalimide derivative. The metal ion-selective signaling behaviors of the sensor were investigated. The sensor presented the selective coloration for Cu²⁺ and Hg²⁺ that can be detected by the naked-eye, respectively. Besides, the addition of Cu²⁺ and Hg²⁺ quenched the fluorescence of 1 obviously and the detection limit was found to be 3 × 10⁻⁷ M for Cu²⁺ and 7 × 10⁻⁷ M for Hg²⁺. This sensor can be utilized for the visual and spectroscopic detection of Cu²⁺ or Hg²⁺ in the presence of the other competing metal ions.     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

"Off-On" based fluorescent chemosensor for Cu2+ in aqueous media and living cells

A novel Cu²⁺-specific “off-on” fluorescent chemosensor of naphthalimide modified rhodamine B (naphthalimide modified rhodamine B chemosensor, NRC) was designed and synthesized, based on the equilibrium between the spirolactam (non-fluorescence) and the ring-opened amide (fluorescence). The chemosensor NRC showed high Cu²⁺-selective fluorescence enhancement over commonly coexistent metal ions or anions in neutral aqueous media. The limit of detection (LOD) based on 3 × δ_blank/k was obtained as low as 0.18 μM of Cu²⁺, as well as an excellent linearity of 0.05-4.5 μM (R = 0.999), indicating the chemosensor of high sensitivity and wide quantitation range. And also the coordination mode with 1:1 stoichiometry was proposed between NRC and Cu²⁺. In addition, the effects of pH, co-existing metal ions and anions, and the reversibility were investigated in detail. It was also demonstrated that the NRC could be used as an excellent “off-on” fluorescent chemosensor for the measurement of Cu²⁺ in living cells with satisfying results, which further displayed its valuable applications in biological systems.     

A Novel Turn-On Fluorescence Probe Based on Cu(II) Functionalized Metal–Organic Frameworks for Visual Detection of Uric Acid

As an important biomarker in urine, the level of uric acid is of importance for human health. In this work, a Cu(II) functionalized metal–organic framework (Cu²⁺@Tb-MOFs) is designed and developed as a novel fluorescence probe for wide-range uric acid detection in human urine. The study shows that this fluorescence platform demonstrated excellent pH-independent stability, high water tolerance, and good thermal stability. Based on the strong interaction between metal ions and uric acid, the designed Cu²⁺@Tb-MOFs can be employed as efficient turn-on fluorescent probes for the detection of uric acid with wide detection range (0~10⁴ µM) and high sensitivity (LOD = 0.65 µM). This probe also demonstrates an anti-interference property, as other species coexisted, and the possibility for recycling. The sensing mechanisms are further discussed at length. More importantly, we experimentally constructed a molecular logic gate operation based on this fluorescence probe for intelligent detection of uric acid. These results suggest the Cu(II) functionalized metal–organic framework can act as a prominent candidate for personalized monitoring of the concentration of uric acid in the human urine system.