Synthesis and Structural Characterization of a Silver(I) Pyrazolato Coordination Polymer

Coinage metal(I)···metal(I) interactions are widely of interest in fields such as supramolecular assembly and unique luminescent properties, etc. Only two types of polynuclear silver(I) pyrazolato complexes have been reported, however, and no detailed spectroscopic characterizations have been reported. An unexpected synthetic method yielded a polynuclear silver(I) complex [Ag(μ-L1Clpz)]_n (L1Clpz⁻ = 4-chloride-3,5-diisopropyl-1-pyrazolate anion) by the reaction of {[Ag(μ-L1Clpz)]₃}₂ with (ⁿBu₄N)[Ag(CN)₂]. The obtained structure was compared with the known hexanuclear silver(I) complex {[Ag(μ-L1Clpz)]₃}₂. The Ag···Ag distances in [Ag(μ-L1Clpz)]_n are slightly shorter than twice Bondi’s van der Waals radius, indicating some Ag···Ag argentophilic interactions. Two Ag–N distances in [Ag(μ-L1Clpz)]_n were found: 2.0760(13) and 2.0716(13) Å, and their N–Ag–N bond angles of 180.00(7)° and 179.83(5)° indicate that each silver(I) ion is coordinated by two pyrazolyl nitrogen atoms with an almost linear coordination. Every five pyrazoles point in the same direction to form a 1-D zig-zag structure. Some spectroscopic properties of [Ag(μ-L1Clpz)]_n in the solid-state are different from those of {[Ag(μ-L1Clpz)]₃}₂ (especially in the absorption and emission spectra), presumably attributable to this zig-zag structure having longer but differently arranged intramolecular Ag···Ag interactions of 3.39171(17) Å. This result clearly demonstrates the different physicochemical properties in the solid-state between 1-D coordination polymer and metalacyclic trinuclear (hexanuclear) or tetranuclear silver(I) pyrazolate complexes.     

Hydrogenation of β-Keto Sulfones to β-Hydroxy Sulfones with Alkyl Aluminum Compounds: Structure of Intermediate Hydroalumination Products

β-Hydroxy sulfones are important in organic synthesis. The simplest method of β-hydroxy sulfones synthesis is the hydrogenation of β-keto sulfones. Herein, we report the reducing properties of alkyl aluminum compounds R₃Al (R = Et, i-Bu, n-Bu, t-Bu and n-Hex); i-Bu₂AlH; Et₂AlCl and EtAlCl₂ in the hydrogenation of β-keto sulfones. The compounds i-Bu₂AlH, i-Bu₃Al and Et₃Al are the at best reducing agents of β-keto sulfones to β-hydroxy sulfones. In reactions of β-keto sulfones with aluminum trialkyls, hydroalumination products with β-hydroxy sulfone ligands [R₂AlOC(C₆H₅)CH₂S(O)₂(p-R¹C₆H₄]_n [where n = 1,2; 2aa: R = i-Bu, R¹ = CH₃; 2ab: R = i-Bu, R¹ = Cl; 2ba: R = Et, R¹ = CH₃; 2bb: R = Et, R¹ = Cl] and {[Et₂AlOC(C₆H₅)CH₂S(O)₂(p-ClC₆H₄]∙Et₃Al}_n 3bb were obtained. These complexes in the solid state have a dimeric structure, while in solutions, they appear as equilibrium monomer–dimer mixtures. The hydrolysis of both the isolated 2aa, 2ab, 2ba, 2bb and 3bb and the postreaction mixtures quantitatively leads to pure racemic β-hydroxy sulfones. Hydroalumination reaction of β-keto sulfones with alkyl aluminum compounds and subsequent hydrolysis of the complexes is a simple and very efficient method of β-hydroxy sulfones synthesis.     

A comparative study of the coordination behavior of cyclo-P5 and cyclo-As5 ligand complexes towards the trinuclear Lewis acid complex (perfluoro-ortho-phenylene)mercury

Reactions of the cyclo-E₅ sandwich complexes [Cp*Fe(η⁵-P₅)] (1) and [Cp*Fe(η⁵-As₅)] (2) with the planar Lewis acid trimeric (perfluoro-ortho-phenylene)mercury [(o-C₆F₄Hg)₃] (3) afford compounds that show distinctly different assemblies in the solid state. The phosphorus containing ligand 1 forms dimeric coordination units with two molecules of 3, with one P atom of each cyclo-P₅ ligand positioned in close proximity to the center of a molecule of 3. In contrast to the coordination behavior of 1, the arsenic analog 2 shows simultaneous interaction of three As atoms with the Hg atoms of 3. A DFT study and subsequent AIM analyses of the products suggest that electrostatic forces are prevalent over donor–acceptor interactions in these adducts, and may play a role in the differences in the observed coordination behavior. Subsequently, a series of [Cp^RFe(η⁵-P₅)] (Cp^R = C₅H_5–n tBu_n, n = 1–3, 6a–c) sandwich complexes was prepared and also reacted with [(o-C₆F₄Hg)₃]. In the solid state the obtained products 7a–c with increasing steric demand of the Cp^R ligands show no significant change in their assembly compared to the Cp* analog 4. All of the products were characterized by single crystal X-ray structure analysis, mass spectrometry and elemental analysis as well as NMR spectroscopy and IR spectrometry.     

Reductive Methylation of Homogeneous Primary β-Lauryl/myristyl 7/3 Polyethyleneoxy n = 3–18 Ethylamines under Phase-Transfer Catalysis Conditions

Homogeneous tertiary N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAT, are niche intermediates in the synthesis of homogeneous N-alkyl (C₁–C₁₈)-N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylammonium chlorides (unitary degree of oligomerization of ethylene oxide in the polyoxyethylene chain). This paper synthetically presents the dependence of the reductive methylation yields of homogeneous primary β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAP, on the reaction time (10–90 min), the temperature (70 °C), the molar ratio formic aldehyde /LM(EO)_nAP (1.1/1–2.5/1), the molar ratio HCOOH/LM(EO)_nAP (5/1), the degree of oligomerization of ethylene oxide in the homogeneous polyoxyethylene chain in the 3,6,9,12,18 series, and the structure of the phase-transfer catalysts. The steric effects of hydrophobic groups CH₃ and C₁₈H₃₇ grafted onto the ammonium function, and the micellar phenomena in the vicinity of their critical micellar concentration, directly proportional to the homogeneous degree of oligomerization, were highlighted. In all cases, a steady increase in reductive methylation yields was observed, with even quantitative values obtained. The high purity of the homologous series LM(EO)_nAT will allow their personalization as reference structures for the study of the evolution of basic colloidal characteristics useful in forecasting technological applications. LM(EO)_nAP were obtained either by direct amidoethylation (nucleophilic addition under basic catalysis of homogeneous lauryl/myristyl 7/3 polyethoxylated n = 3, 6, 9, 12, 18 alcohols, LM(EO)_nOH, to acrylamide monomer) or by cyanoethylation of LM(EO)_nOH under basic catalysis at 25–50 °C, in the presence of Fe²⁺ cations as oligomerization/polymerization inhibitor, followed by partial acid hydrolysis of homogeneous β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionitriles, LM(EO)_nPN, to β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionamides, LM(EO)_nPD, which led to LM(EO)_nAP by Hoffmann degradation. Homogeneous higher tertiary polyetheramines LM(EO)_nAT were structurally characterized.     

Use of a cyclo-P4 building block – a way to networks of host–guest assemblies

Despite the proven ability to form supramolecular assemblies via coordination to copper halides, organometallic building blocks based on four-membered cyclo-P₄ ligands find only very rare application in supramolecular chemistry. To date, only three types of supramolecular aggregates were obtained based on the polyphosphorus end-deck complexes Cp^RTa(CO)₂(η⁴-P₄) (1a: Cp^R = Cp′′; 1b: Cp^R = Cp′′′), with none of them, however, possessing a guest-accessible void. To achieve this target, the use of silver salts of the weakly coordinating anion SbF₆⁻ was investigated as to their self-assembly in the absence and in the presence of the template molecule P₃Se₄. The two-component self-assembly of the building block 1a and the coinage-metal salt AgSbF₆ leads to the formation of 1D or 3D coordination polymers. However, when the template-driven self-assembly was attempted in the presence of an aliphatic dinitrile, the unprecedented barrel-like supramolecular host–guest assembly P₃Se₄@[{(Cp′′Ta(CO)₂(η⁴-P₄))Ag}₈]⁸⁺ of 2.49 nm in size was formed. Moreover, cyclo-P₄-based supramolecules are connected in a 2D coordination network by dinitrile linkers. The obtained compounds were characterised by mass-spectrometry, ¹H and ³¹P NMR spectroscopy and X-ray structure analysis.

A one-pot self-assembly template-controlled reaction is reported to result in a 2D coordination network of first host-guest assemblies P₃Se₄@[{(Cp′′Ta(CO)₂(η⁴-P₄))Ag}₈]⁸⁺ of 2.49 nm in size based on an organometallic complex with a cyclo-P₄ end-deck.     

Tuning π-Acceptor/σ-Donor Ratio of the 2-Isocyanoazulene Ligand: Non-Fluorinated Rival of Pentafluorophenyl Isocyanide and Trifluorovinyl Isocyanide Discovered

Isocyanoazulenes (CNAz) constitute a relatively new class of isocyanoarenes that offers rich structural and electronic diversification of the organic isocyanide ligand platform. This article considers a series of 2-isocyano-1,3-X₂-azulene ligands (X = H, Me, CO₂Et, Br, and CN) and the corresponding zero-valent complexes thereof, [(OC)₅Cr(2-isocyano-1,3-X₂-azulene)]. Air- and thermally stable, X-ray structurally characterized 2-isocyano-1,3-dimethylazulene may be viewed as a non-benzenoid aromatic congener of 2,6-dimethyphenyl isocyanide (2,6-xylyl isocyanide), a longtime “workhorse” aryl isocyanide ligand in coordination chemistry. Single crystal X-ray crystallographic {Cr–CNAz bond distances}, cyclic voltametric {E_1/2(Cr^0/1+)}, ¹³C NMR {δ(¹³CN), δ(¹³CO)}, UV-vis {dπ(Cr) → pπ*(CNAz) Metal-to-Ligand Charge Transfer}, and FTIR {ν_N≡C, ν_C≡O, k_C≡O} analyses of the [(OC)₅Cr(2-isocyano-1,3-X₂-azulene)] complexes provided a multifaceted, quantitative assessment of the π-acceptor/σ-donor characteristics of the above five 2-isocyanoazulenes. In particular, the following inverse linear relationships were documented: δ(¹³CO_trans) vs. δ(¹³CN), δ(¹³CO_cis) vs. δ(¹³CN), and δ(¹³CO_trans) vs. k_C≡O,trans force constant. Remarkably, the net electron withdrawing capability of the 2-isocyano-1,3-dicyanoazulene ligand rivals those of perfluorinated isocyanides CNC₆F₅ and CNC₂F₃.     

C–H bond activation induced by thorium metallacyclopropene complexes: a combined experimental and computational study

Inter- and intramolecular C–H bond activations by thorium metallacyclopropene complexes were comprehensively studied. The reduction of [η⁵-1,2,4-(Me₃C)₃C₅H₂]₂ThCl₂ (1) with potassium graphite (KC₈) in the presence of internal alkynes (PhCCR) yields the corresponding thorium metallacyclopropenes [η⁵-1,2,4-(Me₃C)₃C₅H₂]₂Th(η²-C₂Ph(R)) (R = Ph (2), Me (3), ⁱPr (4), C₆H₁₁ (5)). Complexes 3–5 derived from phenyl(alkyl)acetylenes are very reactive resulting in an intramolecular C–H bond activation of the 1,2,4-(Me₃C)₃C₅H₂ ligand. In contrast, no intramolecular C–H bond activation is observed for the diphenylacetylene derived complex 2, but it does activate α-C–H bonds in pyridine or carbonyl derivatives upon coordination. Density functional theory (DFT) studies complement the experimental studies and provide additional insights into the observed reactivity.     

Computational Studies of Coinage Metal Anion M− + CH3X (X = F,Cl, Br,I) Reactions in Gas Phase

We characterized the stationary points along the nucleophilic substitution (S_N2), oxidative insertion (OI), halogen abstraction (XA), and proton transfer (PT) product channels of M⁻ + CH₃X (M = Cu, Ag, Au; X = F, Cl, Br, I) reactions using the CCSD(T)/aug-cc-pVTZ level of theory. In general, the reaction energies follow the order of PT > XA > S_N2 > OI. The OI channel that results in oxidative insertion complex [CH₃–M–X]⁻ is most exothermic, and can be formed through a front-side attack of M on the C-X bond via a high transition state OxTS or through a S_N2-mediated halogen rearrangement path via a much lower transition state invTS. The order of OxTS > invTS is inverted when changing M⁻ to Pd, a d¹⁰ metal, because the symmetry of their HOMO orbital is different. The back-side attack S_N2 pathway proceeds via typical Walden-inversion transition state that connects to pre- and post-reaction complexes. For X = Cl/Br/I, the invS_N2-TS’s are, in general, submerged. The shape of this M⁻ + CH₃X S_N2 PES is flatter as compared to that of a main-group base like F⁻ + CH₃X, whose PES has a double-well shape. When X = Br/I, a linear halogen-bonded complex [CH₃−X∙··M]⁻ can be formed as an intermediate upon the front-side attachment of M on the halogen atom X, and it either dissociates to CH₃ + MX⁻ through halogen abstraction or bends the C-X-M angle to continue the back-side S_N2 path. Natural bond orbital analysis shows a polar covalent M−X bond is formed within oxidative insertion complex [CH₃–M–X]⁻, whereas a noncovalent M–X halogen-bond interaction exists for the [CH₃–X∙··M]⁻ complex. This work explores competing channels of the M⁻ + CH₃X reaction in the gas phase and the potential energy surface is useful in understanding the dynamic behavior of the title and analogous reactions.     

Detection of σ-alkane complexes of manganese by NMR and IR spectroscopy in solution: (η5-C5H5)Mn(CO)2(ethane) and (η5-C5H5)Mn(CO)2(isopentane)

Irradiation of CpMn(CO)₃ in liquid ethane at 135 K at 355 nm yields a photoproduct that exhibits ν(CO) bands in the IR spectrum shifted to low wavenumber with respect to CpMn(CO)₃ that are indicative of a Mn(i) dicarbonyl. Parallel experiments employing in situ irradiation within an NMR probe (133 K, 355 nm photolysis) reveal the ¹H NMR signals of this product and confirm its formulation as the σ-ethane complex CpMn(CO)₂(η²-C1–H-ethane). The resonance of its coordinated C–H group is observed at δ –5.84 and decays with lifetime of ca. 360 s. Analogous photolysis experiments in isopentane solution with IR detection produce CpMn(CO)₂(η²-C–H-isopentane) with similar IR bands to those of CpMn(CO)₂(η²-C–H-ethane). ¹H NMR spectra of the same species were obtained by irradiation of CpMn(CO)₃ in a 60 : 40 mixture of propane and isopentane; three isomers of CpMn(CO)₂(η²-C–H-isopentane) were detected with coordination of manganese at the two inequivalent methyl positions and at the methylene group, respectively. The lifetimes of these isomers are ca. 380 ± 20 s at 135 K and do not vary significantly from each other. These σ-complexes of manganese are far more reactive than those of related CpRe(CO)₂(alkane) complexes which are stable in solution at 170–180 K. The room temperature lifetimes of CpMn(CO)₂(η²-C–H-ethane) and CpMn(CO)₂(η²-C–H-isopentane), as determined by TRIR spectroscopy, are 2.0 ± 0.1 and 28 ± 1 μs, respectively.     

A (μ-hydrido)diborane(4) anion and its coordination chemistry with coinage metals

A tetra(o-tolyl) (μ-hydrido)diborane(4) anion 1, an analogue of [B₂H₅]⁻ species, was facilely prepared through the reaction of tetra(o-tolyl)diborane(4) with sodium hydride. Unlike common sp²–sp³ diborane species, 1 exhibited a σ-B–B bond nucleophilicity towards NHC-coordinated transition-metal (Cu, Ag, and Au) halides, resulting in the formation of η²-B–B bonded complexes 2 as confirmed by single-crystal X-ray analyses. Compared with 1, the structural data of 2 imply significant elongations of B–B bonds, following the order Au > Cu > Ag. DFT studies show that the diboron ligand interacts with the coinage metal through a three-center-two-electron B–M–B bonding mode. The fact that the B–B bond of the gold complex is much prolonged than the related Cu and Ag compounds might be ascribed to the superior electrophilicity of the gold atom.

A tetra(o-tolyl)(μ-hydrido)diborane(4) anion is facilely prepared via the reaction of tetra(o-tolyl)diborane(4) with NaH. It exhibits a σ-B–B bond nucleophilicity towards NHC-metal halides to give the corresponding η²-B–B bonded metal complexes.     

Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?

Reaction of triisobutylaluminum with SBA15₇₀₀ at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [(SiO)₂Al–CH₂CH(CH₃)₂] 1a, silicon isobutyl [Si–CH₂CH(CH₃)₂] 1b and a silicon hydride [Si–H] 1c. Their structural identity was characterized by FT-IR and advanced solid-state NMR spectroscopies (¹H, ¹³C, ²⁹Si, ²⁷Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [SiO–Al–[CH₂CH(CH₃)₂]₂], with evolution of isobutane. This intermediate undergoes two parallel routes: transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, Si–O–Si but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O–Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al–H bond and a O–Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10^–5 mbar) generates Al–H through a β-H elimination of isobutyl fragment. These supported well-defined Al–H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and ²⁷Al–¹H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.     

Packed-Fiber Solid Phase-Extraction Coupled with HPLC-MS/MS for Rapid Determination of Lipid Oxidative Damage Biomarker 8-Iso-Prostaglandin F2α in Urine

The 8-iso-prostaglandin F_2α (8-iso-PGF_2α) biomarker is used as the gold standard for tracing lipid oxidative stress in vivo. The analysis of urinary 8-iso-PGF_2α is challenging when dealing with trace amounts of 8-iso-PGF_2α and the complexity of urine matrixes. A packed-fiber solid-phase extraction (PFSPE)–coupled with HPLC-MS/MS–method, based on polystyrene (PS)-electrospun nanofibers, was developed for the specific determination of 8-iso-PGF_2α in urine and compared with other newly developed LC-MS/MS methods. The method, which simultaneously processed 12 samples within 5 min on a self-made semi-automatic array solid-phase extraction processor, was the first to introduce PS-electrospun nanofibers as an adsorbent for the extraction of 8-iso-PGF_2α and was successfully applied to real urine samples. After optimizing the PFSPE conditions, good linearity in the range of 0.05–5 ng/mL with R² > 0.9996 and a satisfactory limit of detection of 0.015 ng/mL were obtained, with good intraday and interday precision (RSD < 10%) and recoveries of 95.3–103.8%. This feasible method is expected to be used for the batch quantitative analysis of urinary 8-iso-PGF_2α.     

Tuning Photophysical Properties by p-Functional Groups in Zn(II) and Cd(II) Complexes with Piperonylic Acid

Aggregation between discrete molecules is an essential factor to prevent aggregation-caused quenching (ACQ). Indeed, functional groups capable of generating strong hydrogen bonds are likely to assemble and cause ACQ and photoinduced electron transfer processes. Thus, it is possible to compare absorption and emission properties by incorporating two ligands with a different bias toward intra- and intermolecular interactions that can induce a specific structural arrangement. In parallel, the π electron-donor or electron-withdrawing character of the functional groups could modify the Highest Ocuppied Molecular Orbital (HOMO)–Lowest Unocuppied Molecular Orbital (LUMO) energy gap. Reactions of M(OAc)₂·2H₂O (M = Zn(II) and Cd(II); OAc = acetate) with 1,3-benzodioxole-5-carboxylic acid (Piperonylic acid, HPip) and 4-acetylpyridine (4-Acpy) or isonicotinamide (Isn) resulted in the formation of four complexes. The elucidation of their crystal structure showed the formation of one paddle-wheel [Zn(μ-Pip)₂(4-Acpy)]₂ (1); a mixture of one dimer and two monomers [Zn(µ-Pip)(Pip)(Isn)₂]₂·2[Zn(Pip)₂(HPip)(Isn)]·2MeOH (2); and two dimers [Cd(μ-Pip)(Pip)(4-Acpy)₂]₂ (3) and [Cd(μ-Pip)(Pip)(Isn)₂]₂·MeOH (4). They exhibit bridged (1, µ₂-η¹:η¹), bridged, chelated and monodentated (2, µ₂-η¹:η¹, µ₁-η¹:η¹ and µ₁-η¹), or simultaneously bridged and chelated (3 and 4, µ₂-η²:η¹) coordination modes. Zn(II) centers accommodate coordination numbers 5 and 6, whereas Cd(II) presents coordination number 7. We have related their photophysical properties and fluorescence quantum yields with their geometric variations and interactions supported by TD-DFT calculations.     

Au3-to-Ag3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(μ-Pz-(i-C₃H₇)₂)]₃·[Ag(μ-Tz-(n-C₃F₇)₂)]₃ (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1^st crystallographically-verified stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M′ (Au → Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol⁻¹ between the two trimer moieties – a large value for intermolecular interactions between adjacent d¹⁰ centres (nearly doubling the value for a recently-claimed Au(i) → Cu(i) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol⁻¹ with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M′ frontier molecular orbitals in such polar-covalent M–M′ bonds in this family of molecules. The Au → Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H₃N: → Ag in [Ag(NH₃)₂]⁺, as demonstrated herein quantitatively. Solid-state and molecular modeling illustrate electron flow from the π-basic gold trimer to the π-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL′CT) and metal-to-ligand (MLCT) charge transfer.

A stacked Ag₃–Au₃ bonded (66 kcal mol⁻¹) complex obtained crystallographically exhibits charge-transfer characteristics arising from multiple cooperative supramolecular interactions.     

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H₃btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N–H⋯N hydrogen bonds. While the H₃btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag₃(btim)] coordination networks based on double N–Ag–N bonds at 423 K, by virtue of the unconventional metal–acid replacement reaction (Ag reduces H⁺). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host–guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

A hydrogen-bonded network on a Ag(111) surface can transform into an isostructural Ag(i) coordination network, giving drastically different host–guest recognition behaviours.     

Magnesium–halobenzene bonding: mapping the halogen sigma-hole with a Lewis-acidic complex

Complexes of the Lewis base-free cations (^MeBDI)Mg⁺ and (^tBuBDI)Mg⁺ with Ph–X ligands (X = F, Cl, Br, I) have been studied (^MeBDI = HC[C(Me)N-DIPP]₂ and ^tBuBDI = HC[C(tBu)N-DIPP]₂; DIPP = 2,6-diisopropylphenyl). For the smaller β-diketiminate ligand (^MeBDI) only complexes with PhF could be isolated. Heavier Ph–X ligands could not compete with bonding of Mg to the weakly coordinating anion B(C₆F₅)₄⁻. For the cations with the bulkier ^tBuBDI ligand, the full series of halobenzene complexes was structurally characterized. Crystal structures show that the Mg⋯X–Ph angle strongly decreases with the size of X: F 139.1°, Cl 101.4°, Br 97.7°, I 95.1°. This trend, which is supported by DFT calculations, can be explained with the σ-hole which increases from F to I. Charge calculation and Atoms-In-Molecules analyses show that Mg⋯F–Ph bonding originates from electrostatic attraction between Mg²⁺ and the very polar C^δ+–F^δ− bond. For the heavier halobenzenes, polarization of the halogen atom becomes increasingly important (Cl < Br < I). Complexation with Mg leads in all cases to significant Ph–X bond activation and elongation. This unusual coordination of halogenated species to early main group metals is therefore relevant to C–X bond breaking.

Complexes of a highly Lewis acidic Mg cation and the full series of Ph–X (X = F, Cl, Br, I) have been structurally characterized. The Mg⋯X–Ph angle decreases with halogen size on account of the growing halogen σ-hole.     

Manganese vacancy-confined single-atom Ag in cryptomelane nanorods for efficient Wacker oxidation of styrene derivatives

Single-atom catalysts provide a pathway to elucidate the nature of catalytically active sites. However, keeping them stabilized during operation proves to be challenging. Herein, we employ cryptomelane-type octahedral molecular sieve nanorods featuring abundant manganese vacancy defects as a support, to periodically anchor single-atom Ag. The doped Ag atoms with tetrahedral coordination are found to locate at cation substitution sites rather than being supported on the catalyst surface, thus effectively tuning the electronic structure of adjacent manganese atoms. The resulting unique Ag–O–MnO_x unit functions as the active site. Its turnover frequency reaches 1038 h⁻¹, one order of magnitude higher than for previously reported catalysts, with 90% selectivity for anti-Markovnikov phenylacetaldehyde. Mechanistic studies reveal that the activation of styrene on the ensemble site of Ag–O–MnO_x is significantly promoted, which can accelerate the oxidation of styrene and, in particular, the rate-determining step of forming the epoxide intermediate. Such an extraordinary electronic promotion can be extended to other single-atom catalysts and paves the way for their practical applications.

Manganese vacancy-confined single-atom Ag in cryptomelane nanorods efficiently catalyses Wacker oxidation of styrene derivatives.     

Stability of Manganese(II)–Pyrazine, –Quinoxaline or –Phenazine Complexes and Their Potential as Carbonate Sequestration Agents

Carbonate sequestration technology is a complement of CO₂ sequestration technology, which might assure its long-term viability. In this work, in order to explore the interactions between Mn²⁺ ion with several ligands and carbonate ion, we reported a spectrophotometric equilibrium study of complexes of Mn²⁺ with pyrazine, quinoxaline or phenazine and its carbonate species at 298 K. For the complexes of manganese(II)–pyrazine, manganese(II)–quinoxaline and manganese(II)–phenazine, the formation constants obtained were log β₁₁₀ = 4.6 ± 0.1, log β₁₁₀ = 5.9 ± 0.1 and log β₁₁₀ = 6.0 ± 0.1, respectively. The formation constants for the carbonated species manganese(II)–carbonate, manganese(II)–pyrazine–carbonate, manganese(II)–quinoxaline–carbonate and manganese(II)–phenazine–carbonate complexes were log β₁₁₀ = 5.1 ± 0.1, log β₁₁₀ = 9.8 ± 0.1, log β₁₁₀ = 11.7 ± 0.1 and log β₁₁₀ = 12.7 ± 0.1, respectively. Finally, the individual calculated electronic spectra and its distribution diagram of these species are also reported. The use of N-donor ligand with π-electron-attracting activity in a manganese(II) complex might increase its interaction with carbonate ions.     

Perturbating Intramolecular Hydrogen Bonds through Substituent Effects or Non-Covalent Interactions

An analysis of the effects induced by F, Cl, and Br-substituents at the α-position of both, the hydroxyl or the amino group for a series of amino-alcohols, HOCH₂(CH₂)_nCH₂NH₂ (n = 0–5) on the strength and characteristics of their OH···N or NH···O intramolecular hydrogen bonds (IMHBs) was carried out through the use of high-level G4 ab initio calculations. For the parent unsubstituted amino-alcohols, it is found that the strength of the OH···N IMHB goes through a maximum for n = 2, as revealed by the use of appropriate isodesmic reactions, natural bond orbital (NBO) analysis and atoms in molecules (AIM), and non-covalent interaction (NCI) procedures. The corresponding infrared (IR) spectra also reflect the same trends. When the α-position to the hydroxyl group is substituted by halogen atoms, the OH···N IMHB significantly reinforces following the trend H < F < Cl < Br. Conversely, when the substitution takes place at the α-position with respect to the amino group, the result is a weakening of the OH···N IMHB. A totally different scenario is found when the amino-alcohols HOCH₂(CH₂)_nCH₂NH₂ (n = 0–3) interact with BeF₂. Although the presence of the beryllium derivative dramatically increases the strength of the IMHBs, the possibility for the beryllium atom to interact simultaneously with the O and the N atoms of the amino-alcohol leads to the global minimum of the potential energy surface, with the result that the IMHBs are replaced by two beryllium bonds.