Thermoanalytical studies of natural potassium, sodium and ammonium alunites

Dynamic and controlled rate thermal analysis (CRTA) has been used to characterise alunites of formula [M(Al)₃(SO₄)₂(OH)₆] where M⁺ is the cations K⁺, Na⁺ or NH₄ ⁺. Thermal decomposition occurs in a series of steps: (a) dehydration, (b) well-defined dehydroxylation and (c) desulphation. CRTA offers a better resolution and a more detailed interpretation of water formation processes via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of water formation reveal the subtle nature of dehydration and dehydroxylation.     

Controlled rate thermal analysis of sepiolite

CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of a clay mineral such as sepiolite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal changes in the sepiolite as the sepiolite is converted to an anhydride. In the dynamic experiment two dehydration steps are observed over the ~20–170 and 170–350 °C temperature range. In the dynamic experiment three dehydroxylation steps are observed over the temperature ranges 201–337, 337–638 and 638–982 °C. The CRTA technology enables the separation of the thermal decomposition steps.     

Controlled rate thermal analysis of sepiolite

Controlled rate thermal analysis (CRTA) technology offers better resolution and a more detailed interpretation of the decomposition processes of a clay mineral such as sepiolite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal changes in the sepiolite as the sepiolite is converted to an anhydride. In the dynamic experiment two dehydration steps are observed over the ~20–170 and 170–350 °C temperature range. In the dynamic experiment three dehydroxylation steps are observed over the temperature ranges 201–337, 337–638 and 638–982 °C. The CRTA technology enables the separation of the thermal decomposition steps.     

Conventional and controlled rate thermal analysis of nesquehonite Mg(HCO<Subscript>3</Subscript>)(OH)·2(H<Subscript>2</Subscript>O)

The understanding of the thermal stability of magnesium carbonates and the relative metastability of hydrous carbonates including hydromagnesite, artinite, nesquehonite, barringtonite and lansfordite is extremely important to the sequestration process for the removal of atmospheric CO₂. The conventional thermal analysis of synthetic nesquehonite proves that dehydration takes place in two steps at 157, 179°C and decarbonation at 416 and 487°C. Controlled rate thermal analysis shows the first dehydration step is isothermal and the second quasi-isothermal at 108 and 145°C. In the CRTA experiment carbon dioxide is evolved at 376°C. CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of magnesium carbonates such as nesquehonite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal partial collapse of the nesquehonite structure.     

Controlled rate thermal analysis of hydromagnesite

The reaction of magnesium minerals such as brucite with CO₂ is important in the sequestration of CO₂. The study of the thermal stability of hydromagnesite and diagenetically related compounds is of fundamental importance to this sequestration. The understanding of the thermal stability of magnesium carbonates and the relative metastability of hydrous carbonates including hydromagnesite, artinite, nesquehonite, barringtonite and lansfordite is extremely important to the sequestration process for the removal of atmospheric CO₂. This work makes a comparison of the dynamic and controlled rate thermal analysis of hydromagnesite and nesquehonite. The dynamic thermal analysis of synthetic hydromagnesite proves that dehydration takes place in two steps at 135 and 184°C, dehydroxylation at 412°C and decarbonation at 474°C. Controlled rate thermal analysis shows the first dehydration step is isothermal and the second quasi-isothermal at 108 and 145°C, respectively. In the CRTA experiment both water and carbon dioxide are evolved in an isothermal decomposition at 376°C. CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of magnesium carbonates such as nesquehonite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal partial nesquehonite structure.     

Dynamic and controlled rate thermal analysis of hydrozincite and smithsonite

The understanding of the thermal stability of zinc carbonates and the relative stability of hydrous carbonates including hydrozincite and hydromagnesite is extremely important to the sequestration process for the removal of atmospheric CO₂. The hydration-carbonation or hydration-and-carbonation reaction path in the ZnO-CO₂-H₂O system at ambient temperature and atmospheric CO₂ is of environmental significance from the standpoint of carbon balance and the removal of green house gases from the atmosphere. The dynamic thermal analysis of hydrozincite shows a 22.1% mass loss at 247°C. The controlled rate thermal analysis (CRTA) pattern of hydrozincite shows dehydration at 38°C, some dehydroxylation at 170°C and dehydroxylation and decarbonation in a long isothermal step at 190°C. The CRTA pattern of smithsonite shows a long isothermal decomposition with loss of CO₂ at 226°C. CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of zinc carbonate minerals via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. The CRTA technology offers a mechanism for the study of the thermal decomposition and relative stability of minerals such as hydrozincite and smithsonite.     

Mechanism for hydrotalcite decomposition: a controlled rate thermal analysis study

The mechanism for the decomposition of hydrotalcite remains unsolved. Controlled rate thermal analysis enables this decomposition pathway to be explored. Hydrotalcites containing carbonate, vanadate and molybdate were prepared by coprecipitation. The resulting materials were characterised by XRD, simultaneous TG-DTG-DTA and controlled rate thermal analysis (CRTA) to determine the stability and thermal decomposition pathway of the synthesised hydrotalcites. For the carbonate intercalated hydrotalcite dehydration takes place in three steps two of which are quasi-isothermal and one non-isothermal. Dehydroxylation and decarbonation occur separately over the 235-330 and 330-370 degrees C temperature range. A second non-isothermal decarbonation step is observed in the 371-541 degrees C range. In comparison the mixed carbonate-vanadate and carbonate-molybdate hydrotalcites show two dehydration steps and the dehydroxylation and decarbonation occur simultaneously. The observation of three dehydration steps is used to support the model of water molecules in three structurally distinct environments in the hydrotalcite interlayer. CRTA technology provides a mechanism for the decomposition of hydrotalcites.     

Thermal decomposition of natural iowaite

The thermal decomposition of natural iowaite of formula Mg₆Fe₂(Cl,(CO₃)_0.5)(OH)₁₆·4H₂O was studied by using a combination of thermogravimetry and evolved gas mass spectrometry. Thermal decomposition occurs over a number of mass loss steps at 60°C attributed to dehydration, 266 and 308°C assigned to dehydroxylation of ferric ions, at 551°C attributed to decarbonation and dehydroxylation, and 644, 703 and 761°C attributed to further dehydroxylation. The mass spectrum of carbon dioxide exhibits a maximum at 523°C. The use of TG coupled to MS shows the complexity of the thermal decomposition of iowaite. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of hydrotalcite with chromate, molybdate or sulphate in the interlayer

The thermal decomposition of hydrotalcites with chromate, molybdate and sulphate in the interlayer has been studied using thermogravimetric analysis coupled to a mass spectrometer measuring the gas evolution. X-ray diffraction shows the hydrotalcites have a d(0 0 3) spacing of 7.98 Å with very small differences in the d-spacing between the three hydrotalcites. XRD was also used to determine the products of the thermal decomposition. For the sulphate-hydrotalcite decomposition the products were MgO and a spinel MgAl₂O₄, for the chromate interlayered hydrotalcite MgO, Cr₂O₃ and spinel. For the molybdate interlayered hydrotalcite the products were MgO, spinel and MgMoO₄. EDX analyses enabled the formula of the hydrotalcites to be determined. Two processes are observed in the thermal decomposition namely dehydration and dehydroxylation and for the case of the sulphate interlayered hydrotalcite, a third process is the loss of sulphate. Both the dehydration and dehydroxylation take place in three steps each for each of the hydrotalcites.     

A thermogravimetric study of the alunites of sodium, potassium and ammonium

Thermogravimetry in tandem with mass spectrometry has been used to characterise the thermal decomposition of synthetic alunites of potassium, sodium and ammonium. Three mechanisms of decomposition are observed (a) dehydration, (b) dehydroxylation and (c) desulphation. The thermal decomposition of the three alunites is different. For NH₄-alunite, an additional process of de-ammoniation is observed which occurs simultaneously with dehydration. Dehydroxylation takes place in a series of four steps. De-sulphation occurs for K-alunite at 680 °C in a single step in comparison with Na and NH₄ alunites where de-sulphation is observed in a series of four steps. The temperature of desulphation is cation dependent. The thermal decomposition is not completed until around 800 °C.     

Using thermally activated hydrotalcite for the uptake of phosphate from aqueous media

Hydrotalcites of formula Mg₆A₁₂(OH)₁₆(PO₄)·4H₂O formed by intercalation with the phosphate anion as a function of pH show variation in the d-spacing attributed to the size of the hydrated anion in the interlayer. The value changes from 11.91 Å for pH 9.3, to 7.88 Å at pH 12.5. No crystalline hydrotalcites with phosphate in the interlayer were formed at pH 9.3. Thermal decomposition identifies three steps namely dehydration, dehydroxylation and some loss of carbonate during the thermal treatment. The addition of a thermally activated ZnAl-HT to a phosphate solution resulted in the uptake of the phosphate and the reformation of the hydrotalcite. The technology has the potential for water purification through anion removal.     

Kinetic parameters of unsaturated polyester resin modified with poly(ε -caprolactone)

The mineral sabugalite (HAl)_0.5[(UO₂)₂(PO₄)]₂⋅8H₂O, has been studied using a combination of energy dispersive X-ray analysis, X-ray diffraction, dynamic and controlled rate thermal analysis techniques. X-ray diffraction shows that the starting material in the thermal decomposition is sabugalite and the product of the thermal treatment is a mixture of aluminium and uranyl phosphates. Four mass loss steps are observed for the dehydration of sabugalite at 48°C (temperature range 39 to 59°C), 84°C (temperature range 59 to 109°C), 127°C (temperature range 109 to 165°C) and around 270°C (temperature range 175 to 525°C) with mass losses of 2.8, 6.5, 2.3 and 4.4%, respectively, making a total mass loss of water of 16.0%. In the CRTA experiment mass loss stages were found at 60, 97, 140 and 270°C which correspond to four dehydration steps involving the loss of 2, 6, 6 and 2 moles of water. These mass losses result in the formation of four phases namely meta(I)sabugalite, meta(II)sabugalite, meta(III)sabugalite and finally uranyl phosphate and alumina phosphates. The use of a combination of dynamic and controlled rate thermal analysis techniques enabled a definitive study of the thermal decomposition of sabugalite. While the temperature ranges and the mass losses vary due to the different experimental conditions, the results of the CRTA analysis should be considered as standard data due to the quasi-equilibrium nature of the thermal decomposition process. The online version of the original article can be found at     

Thermal decomposition of hydrotalcites with variable cationic ratios

Thermal analysis complimented with evolved gas mass spectrometry has been applied to hydrotalcites containing carbonate prepared by coprecipitation and with varying divalent/trivalent cation ratios. The resulting materials were characterised by XRD, and TG/DTG to determine the stability of the hydrotalcites synthesised. Hydrotalcites of formula Mg₄(Fe,Al)₂(OH)₁₂(CO₃)·4H₂O, Mg₆(Fe,Al)₂(OH)₁₆(CO₃)·5H₂O, and Mg₈(Fe,Al)₂(OH)₂₀(CO₃)·8H₂O were formed by intercalation with the carbonate anion as a function of the divalent/trivalent cationic ratio. XRD showed slight variations in the d-spacing between the hydrotalcites. The thermal decomposition of carbonate hydrotalcites consists of two decomposition steps between 300 and 400°C, attributed to the simultaneous dehydroxylation and decarbonation of the hydrotalcite lattice. Water loss ascribed to dehydroxylation occurs in two decomposition steps, where the first step is due to the partial dehydroxylation of the lattice, while the second step is due to the loss of water interacting with the interlayer anions. Dehydroxylation results in the collapse of the hydrotalcite structure to that of its corresponding metal oxides and spinels, including MgO, MgAl₂O₄, and MgFeAlO₄.     

Effect of mechanical grinding on the reaction pathway and kinetics of the thermal decomposition of hydromagnesite

Effect of mechanical grinding of hydromagnesite on the reaction pathway and kinetic behaviors of the thermal decomposition process was investigated by means of thermoanalytical techniques, together with crystallographic and morphological measurements. A crystalline hydromagnesite, the as-received sample, was decomposed in two distinguished mass loss steps of overlapped dehydration-dehydroxylation and dehydroxylation-decarbonation via an amorphous intermediate of carbonate compound. Thermal decomposition of an amorphous hydromagnesite, obtained by mechanical grinding of the as-received sample, was characterized by three well-separated decomposition processes of dehydration, dehydroxylation and decarbonation. The kinetic behaviors of the respective decomposition steps were estimated separately using a mathematical deconvolution of the partially overlapped reaction steps. From the formal kinetic analyses of the respective reaction processes, it was revealed that the dehydration and dehydroxylation processes indicate the decelerate rate behaviors controlled by diffusion, while the rate behavior of nucleation limited type is predominant for the decarbonation process.     

A thermogravimetric and infrared emission spectroscopic study of alunite

Thermogravimetric and differential thermogravimetric analysis has been used to characterize alunite of formula [K₂(Al³⁺)₆(SO₄)₄(OH)₁₂]. Thermal decomposition occurs in a series of steps (a) dehydration up to 225°C, (b) well defined dehydroxylation at 520°C and desulphation which takes place as a series of steps at 649, 685 and 744°C.The alunite minerals were further characterized by infrared emission spectroscopy (IES). Well defined hydroxyl stretching bands at around 3463 and 3449 cm^?1 are observed. At 550°C all intensity in these bands is lost in harmony with the thermal analysis results. OH stretching bands give calculated hydrogen bond distances of 2.90 and 2.84–7 Å. These hydrogen bond distances increase with increasing temperature. Characteristic (SO₄)^2? stretching modes are observed at 1029.5, 1086 and 1170 cm^?1. These bands shift to lower wavenumbers on thermal treatment. The intensity in these bands is lost by 550°C.     

Thermal decomposition of hydrotalcite with molybdate and vanadate anions in the interlayer

Hydrotalcites containing carbonate, vanadate and molybdate were prepared by coprecipitation. The resulting materials were characterized by XRD, and TG/DTA to determine the stability of the hydrotalcites synthesized. The thermal decomposition of carbonate hydrotalcites consist of two decomposition steps between 300 and 400°C, attributed to the simultaneous dehydroxylation and decarbonation of the hydrotalcite lattice. Water loss ascribed to dehydroxylation occurs in two decomposition steps, where the first step is due to the partial dehydroxylation of the lattice, while the second step is due to the loss of water interacting with the interlayer anions. Dehydroxylation results in the collapse of the hydrotalcite structure to that of its corresponding metal oxides, including MgO, Al₂O₃, MgAl₂O₄, NaMg₄(VO₄)₃ and Na₂Mg₄(MoO₄)₅. The presence of oxy-anions proved to be beneficial in the stability of the hydrotalcite structure, shown by the delay in dehydroxylation of oxy-anion containing hydrotalcites compared to the carbonate hydrotalcite. This is due to the substantial amount of hydroxyl groups involved in a network of hydrogen bonds involving the intercalated anions. Therefore, the stability of the hydrotalcite structure appears to be dependent on the type of anion present in the interlayer. The order of thermal stability for the synthesized hydrotalcites in this study is Syn-HT-V>Syn-HT-Mo> Syn-HT-CO₃-V>Syn-HT-CO₃-Mo>Syn-HT-CO₃. Carbonate containing hydrotalcites prove to be less stable than oxy-anion only hydrotalcites.     

Thermal analysis of beaverite in comparisonwith plumbojarosite

The thermal decomposition of beaverite and plumbojarosite was studied using a combination of thermogravimetric analysis coupled to a mass spectrometer. The mineral beaverite Pb(Fe,Cu)₃(SO₄)₂(OH)₆ decomposes in three stages attributed to dehydroxylation, loss of sulphate and loss of oxygen, which take place at 376 and 420, 539 and 844°C. In comparison three thermal decomposition steps are observed for plumbojarosite PbFe₆(SO₄)₄(OH)₁₂ at 376, 420 and 502°C attributed to dehydroxylation; loss of sulphate occurs at 599°C; and loss of oxygen and formation of lead occurs at 844 and 953°C. The temperatures of the thermal decomposition of the natural plumbojarosite were found to be less than that for the synthetic jarosite. A comparison of the thermal decomposition of plumbojarosite with argentojarosite is made. The understanding of the chemistry of the thermal decomposition of minerals such as beaverite, argentojarosite and plumbojarosite and related minerals is of vital importance in the study known as ‘archeochemistry’.     

Synthesis and thermal analysis of indium-based hydrotalcites of formula Mg<Subscript>6</Subscript>In<Subscript>2</Subscript>(CO<Subscript>3</Subscript>)(OH)<Subscript>16</Subscript>·4H<Subscript>2</Subscript>O

Insight into the unique structure of layered double hydroxides (LDHs) has been obtained using a combination of X-ray diffraction and thermal analysis. Indium containing hydrotalcites of formula Mg₄In₂(CO₃)(OH)₁₂·4H₂O (2:1 In-LDH) through to Mg₈In₂(CO₃)(OH)₁₈·4H₂O (4:1 In-LDH) with variation in the Mg:In ratio have been successfully synthesised. The d(003) spacing varied from 7.83 Å for the 2:1 LDH to 8.15 Å for the 3:1 indium containing LDH. Distinct mass loss steps attributed to dehydration, dehydroxylation and decarbonation are observed for the indium containing hydrotalcite. Dehydration occurs over the temperature range ambient to 205 °C. Dehydroxylation takes place in a series of steps over the 238–277 °C temperature range. Decarbonation occurs between 763 and 795 °C. The dehydroxylation and decarbonation steps depend upon the Mg:In ratio. The formation of indium containing hydrotalcites and their thermal activation provides a method for the synthesis of indium oxide-based catalysts.     

Kinetical possibilities of controlled transformation Rate Thermal Analysis (CRTA)

In the first part, this paper reviews several ways to derive kinetical results from Controlled transformation Rate Thermal Analysis (CRTA) experiments: applying the rate-jump method to measure the activation energy, determining the reaction mechanism simply from the shape of the curve and finally deriving both the activation energy and the reaction mechanism from a single CRTA experiment. Application to the 5 steps of the thermal analysis of UO₂(NO₃)2(H₂O)₂·4H₂O shows that the layered structure of the hydrate leads to 4 dehydration steps essentially following a mechanism of nucleation and 2-dimensional growth whereas the denitration step seems to be controlled by a double mechanism of diffusion and desorption. The first 4 water molecules to leave are in the same starting state but evolve in 2 steps, well separated by CRTA and involving 3 and 1 molecule, respectively, which is understood by structural considerations.

---

Zusammenfassung Diese Arbeit gibt einen überblick über einige Verfahren zur Erstellung kinetischer Ergebnisse aus CRTA-Experimenten (Controlled transformation Rate Thermal Analysis): Anwendung des rate-jump-Verfahrens zur Messung der Aktivierungsenergie, Ermittlung des Reaktionsmechanismus lediglich aus der Kurvenform und letztlich die Ermittlung der Aktivierungsenergie und des Reaktionsmechanismus aus einem einzigen CRTA-Experiment. Eine Anwendung auf die 5 Schritte der thermischen Zersetzung von UO₂(NO₃)2(H₂O)₂·4H₂O zeigt, da\ die Schichtenstruktur des Hydrates zu 4 Dehydratationsschritten führt, denen im wesentlichen ein Mechanismus aus Keimbildung und 2-dimensionalem Wachstum zugrundeliegt, wÄhrend der Denitratationsschritt durch einen Doppelmechanismus aus Diffusion und Desorption bestimmt zu sein scheint. Die ersten 4 Wassermoleküle befinden sich im selben Ausgangszustand, werden aber in 2 Schritten abgegeben, mittels CRTA als 3+1 Moleküle separat beobachtbar, was mittels struktureller überlegungen verstanden werden kann.

     

Thermal decomposition of hydrotalcitewith hexacyanoferrate(II) and hexacyanoferrate(III) anions in the interlayer

The thermal decompositions of hydrotalcites with hexacyanoferrate(II) and hexacyanoferrate(III) in the interlayer have been studied using thermogravimetry combined with mass spectrometry. X-ray diffraction shows the hydrotalcites have a d(003) spacing of 11.1 and 10.9 Å which compares with a d-spacing of 7.9 and 7.98 Å for the hydrotalcite with carbonate or sulphate in the interlayer. XRD was also used to determine the products of the thermal decomposition. For the hydrotalcite decomposition the products were MgO, Fe₂O₃ and a spinel MgAl₂O₄. Dehydration and dehydroxylation take place in three steps each and the loss of cyanide ions in two steps.