Banana Peel: A Potential Substrate for Laccase Production by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> VkJ2.4.5 in Solid-State Fermentation

In solid-state fermentation, among various solid supports evaluated, banana peel was found to be an ideal support and resulted into higher levels of laccase (6281.4 ± 63.60 U l⁻¹) along with notable levels of manganese peroxidase production (1339.0 ± 131.23 U l⁻¹) by Aspergillus fumigatus VkJ2.4.5. Maximum levels of laccase was achieved under derived conditions consisting of 80% of moisture level, 6 days of incubation period, 6% inoculum level, and an aeration level of 2.5 l min⁻¹. A column-tray bioreactor was designed to scale up and economize the enzyme production in three successive cycles of fermentation using the same fungal biomass. Thermal and pH stability profiles revealed that enzyme was stable up to 50°C and at varying pH range from 5–9 for up to 2 h. The apparent molecular weight of laccase was found to be 34 ± 1 kDa. MALDI-TOF/TOF analysis of the protein showed significant homology with maximum identity of 67% to other laccases reported in database.     

Immobilization of Phenylalanine Dehydrogenase and Its Application in Flow-Injection Analysis System for Determination of Plasma Phenylalanine

Phenylalanine dehydrogenase (l-PheDH) from Sporosarcina ureae was immobilized on DEAE-cellulose, modified initially with 2-amino-4,6-dichloro-s-triazine followed by hexamethylenediamine and glutaraldehyde. The highest activity of immobilized PheDH was determined as 95.75 U/g support with 56% retained activity. The optimum pH value of immobilized l-PheDH was shifted from pH 10.4 to 11.0. The immobilized l-PheDH showed activity variations close to the maximum value in a wider temperature range of 45–55 °C, whereas it was 40 °C for the native enzyme. The pH and the thermal stability of the immobilized l-PheDH were also better than the native enzyme. At pH 10.4 and 25 °C, K _m values of the native and the immobilized l-PheDH were determined as K _{m Phe} = 0.118, 0.063 mM and K _{m NAD}⁺ = 0.234, 0.128 mM, respectively. Formed NADH at the exit of packed bed reactor column was detected by the flow-injection analysis system. The conversion efficiency of the reactor was found to be 100% in the range of 5–600 μM Phe at 9 mM NAD⁺ with a total flow rate of 0.1 mL/min. The reactor was used for the analyses of 30 samples each for 3 h per day. The half-life period of the reactor was 15 days.     

A Temperature and Salt-Tolerant <Emphasis Type="SmallCaps">l</Emphasis>-Glutaminase from Gangotri Region of Uttarakhand Himalaya: Enzyme Purification and Characterization

Purification and characterization of halotolerant, thermostable alkaline l-glutaminase from a Bacillus sp. LKG-01 (MTCC 10401), isolated from Gangotri region of Uttarakhand Himalaya, is being reported in this paper. Enzyme has been purified 49-fold from cell-free extract with 25% recovery (specific activity 584.2 U/mg protein) by (NH₄)₂SO₄ precipitation followed by anion exchange chromatography and gel filtration. Enzyme has a molecular weight of 66 kDa. l-Glutaminase is most active at pH 11.0 and stable in the pH range 8.0–11.0. Temperature optimum is 70 °C and is completely stable after 3 h pre-incubation at 50 °C. Enzyme reflects more enhanced activity with 1–20% (w/v) NaCl, which is further reduced to 80% when NaCl concentration was increased up to 25%. l-Glutaminase is almost active with K⁺, Zn²⁺, and Ni²⁺ ions and K _m and V _max values of 240 μM and 277.77 ± 1.1 U/mg proteins, respectively. Higher specific activity, purification fold, better halo-tolerance, and thermostability would make this enzyme more attractive for food fermentation with respect to other soil microbe derived l-glutaminase reported so far.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Experimental and Theoretical Constraints on pH Measurements with an Iridium Oxide Electrode in Aqueous Fluids from 25 to 175 °C and 25 MPa

In-situ measurement of pH at elevated temperatures and pressures is of major importance for investigating chemical and biochemical systems in extreme environments. Based on the performance of the newly developed IrO _x electrode at 25 °C, we initiated a series of experiments to test the electrode at elevated temperatures (100 to 175 °C) and high pressure (25 MPa). The experiment was carried out in a titanium flow-through reactor. Our results revealed good pH response at 100, 150 and 175 °C, with good Nernstian slopes at 100 and 150 °C. Although a greater-than-Nernstian response was observed at 175 °C, the factors that cause this difference are attributed to the accuracy of calculations of the distribution of aqueous species rather than alteration of the IrO _x surface. A key problem that may limit applications of the IrO _x electrode at elevated temperatures and pressures is the noticeable shift in E° during the 175 °C (25 MPa) experiments and between experiments with similar conditions at 150 °C. The results of tests from 25 °C to elevated temperatures provide highly useful information on the reversibility and functionality of the IrO _x -pH sensor with implications for the suitability of its use under challenging chemical and physical conditions.     

On the stability of the bioactive flavonoids quercetin and luteolin under oxygen-free conditions

The natural flavonoid compounds quercetin (3,3′,4′,5,7-pentahydroxyflavone) and luteolin (3′,4′,5,7-tetrahydroxyflavone) are important bioactive compounds with antioxidative, anti-allergic, and anti-inflammatory properties. However, both are unstable when exposed to atmospheric oxygen, which causes degradation and complicates their analytical determinations. The oxidative change of these flavonoids was observed and followed by UV–visible spectrophotometry, both in aqueous and ethanolic solutions. The distribution of the degradation products in aqueous media was monitored by LC–MS and LC–DAD analysis. The amounts of oxidative reaction products increase with the exposure time. The oxidative degradation reduces the pharmacological efficiency of these antioxidants and renders analytical determination inaccurate. The oxidative changes in flavonoid test solutions can explain the inconsistent dissociation constants reported in the literature. Dissociation constants of quercetin and luteolin were determined both by alkalimetric titration and by UV–visible spectrophotometry under deaerated conditions. The values pK ₁ = 5.87 ± 0.14 and pK ₂ = 8.48 ± 0.09 for quercetin, and pK ₁ = 5.99 ± 0.32 and pK ₂ = 8.40 ± 0.42 for luteolin were found.     

Development of a liquid chromatography-mass spectrometry method for the determination of ursolic acid in rat plasma and tissue: application to the pharmacokinetic and tissue distribution study

A fast and sensitive liquid chromatography–mass spectrometry method was developed for the determination of ursolic acid (UA) in rat plasma and tissues. Glycyrrhetinic acid was used as the internal standard (IS). Chromatographic separation was performed on a 3.5 μm Zorbax SB-C18 column (30 mm × 2.1 mm) with a mobile phase consisting of methanol and aqueous 10 mM ammonium acetate using gradient elution. Quantification was performed by selected ion monitoring with (m/z)⁻ 455 for UA and (m/z)⁻ 469 for the IS. The method was validated in the concentration range of 2.5 − 1470 ng mL⁻¹ for plasma samples and 20 − 11760 ng g⁻¹ for tissue homogenates. The intra- and inter-day assay of precision in plasma and tissues ranged from 1.6% to 7.1% and 3.7% to 9.0%, respectively, and the intra- and inter-day assay accuracy was 84.2 − 106.9% and 82.1 − 108.1%, respectively. Recoveries in plasma and tissues ranged from 83.2% to 106.2%. The limits of detections were 0.5 ng mL⁻¹ or 4.0 ng g⁻¹. The recoveries for all samples were >90%, except for liver, which indicated that ursolic acid may metabolize in liver. The main pharmacokinetic parameters obtained were T _max = 0.42 ± 0.11 h, C _max = 1.10 ± 0.31 μg mL⁻¹, AUC = 1.45 ± 0.21 μg h mL⁻¹ and K _a = 5.64 ± 1.89 h⁻¹. The concentrations of UA in rat lung, spleen, liver, heart, and cerebellum were studied for the first time. This method is validated and could be applicable to the investigation of the pharmacokinetics and tissue distribution of UA in rats.     

Complexation Studies of N,N′-ethylenedi-L-cysteine with Some Metal Ions

As part of a search for environmentally friendly metal chelating ligands, the stability constants of N, N′-ethylenedi-L-cysteine (EC) complexes with Ca(II), Cu(II), Mg(II) and Mn(II) were determined by potentiometry with a glass electrode in aqueous solutions containing 0.1 mol⋅L⁻¹ KCl at 25 °C. Final models are proposed. For the Ca(II)–EC system, the overall stability constants are log ₁₀ β _CaHL=14.53±0.03, log ₁₀ β _CaL=4.79±0.01 and log ₁₀ β _CaL2=8.38±0.04. For the M(II)–EC systems, where M=Cu(II) or Mg(II), the overall stability constants are log₁₀ β _CuHL=31.19±0.02 and log ₁₀ β _CuL=27.02±0.06 for Cu(II), and are log ₁₀ β _MgHL=14.84±0.02 and log ₁₀ β _MgL=6.164±0.008 for Mg(II). For the Mn(II)–EC system, the overall stability constant is log ₁₀ β _MnL=10.12±0.01. Metal–chelate speciations simulations showed that EC is an efficient chelating agent for Cd(II), Co(II), Cu(II), Ni(II), Pb(II) and Zn(II) for pH≥7.     

Development and validation of an HPLC-UV detection assay for the determination of rufinamide in human plasma and saliva

The development of a simple and rapid high-performance liquid chromatography (HPLC) method for the determination of the new antiepileptic drug rufinamide (RFN) in human plasma and saliva is reported. Samples (250 μl) are alkalinized with ammonium hydroxide (pH 9.25) and extracted with dichloromethane using metoclopramide as internal standard. Separation is achieved with a Spherisorb silica column (250 × 4.6 mm i.d., 5 μm) at 30 °C using as mobile phase a solution of methanol/dichloromethane/n-hexane 10/25/65 (vol/vol/vol) mixed with 6 ml ammonium hydroxide. The instrument used was a Shimadzu LC-10Av chromatograph and flow rate was 1.5 ml min^-1, with a LaChrom L-7400 UV detector set at 230 nm. Calibration curves are linear [r ² = 0.998 ± 0.002 for plasma (n = 10) and r ² = 0.999 ± 0.001 for saliva (n = 9)] over the range of 0.25–20.0 μg ml^-1, with a limit of quantification at 0.25 μg ml^-1. Precision and accuracy are within current acceptability standards. The assay is suitable for pharmacokinetic studies in humans and for therapeutic drug monitoring.     

Study of Nd2–x Ce x CuO4?±?δ (x?=?0.1–0.25) as cathode material for intermediate-temperature solid oxide fuel cells

The solid solubility limit of Ce in Nd_2–x Ce _x CuO_4 ± δ , prepared by sol–gel process, is established up to x = 0.2. The transition from negative temperature coefficient to positive temperature coefficient, within the solid solubility region, is observed at 620 °C. The area-specific-resistance (ASR) is optimized for electrochemical cell sintered at 800 °C. ASR enhances with increase in sintering temperature of cell. ASR value of 0.93 ohm cm² at 700 °C, determined by electrochemical impedance spectroscopy is comparable against that by voltage versus current (V–I) characteristics at 0.98 ohm cm² at the same temperature. Electrochemical performance and ASR of Nd_1.8Ce_0.2CuO_4 ± δ is improved when prepared by sol–gel route over solid-state reaction, which is attributed to uniform size and shape of nanocrystalline grains.     

Kinetics of Growth and Enhanced Sophorolipids Production by Candida bombicola Using a Low-Cost Fermentative Medium

In this study, effect of various parameters on sophorolipid (SL) production by the yeast Candida bombicola was investigated for the enhancing of its production by employing L18 orthogonal array design of experiments. At optimum conditions of sugarcane molasses 50 g l⁻¹, soybean oil 50 g l⁻¹, inoculum size 5% (v/v), temperature 30 °C, inoculum age 2 days, and agitation 200 rpm, the yeast produced almost equal amounts of the product in batch shake flasks and in a 3-l fermentor without any pH control (45 and 47 g l⁻¹, respectively). However, the yield increased to 60 g l⁻¹ in the fermentor under controlled pH environment. Time course of SL production, yeast biomass growth, and utilization of sugarcane molasses and soybean oil at these optimized conditions were fitted to existing kinetic models reported in the literature. Estimated kinetic parameters from these models suggested that conventional medium containing glucose can very well be replaced with the present low-cost fermentative medium.     

Optimization on fabrication and performance of A-site-deficient La0.58Sr0.4Co0.2Fe0.8O3-δ cathode for SOFC

A-site-deficient perovskite cathode material La_0.58Sr_0.4Co_0.2Fe_0.8O_3 − δ (L58SCF) is coated on the yttria-stabilized zirconia electrolyte by screen-printing technique. Several key fabrication parameters including selection of additives (binder and pore former), effect of coating thickness, sintering temperature and time on the microstructure, and electrochemical performance of cathode are investigated by scanning electron microscopy and electrochemical impedance spectroscopy. We study the microstructure and the electrochemical property of the cathode with different kinds of additives. Results show that the cathode possesses fine microstructure, enough porosity, and ideal electrochemical property when polyvinyl butyral serves as both binder and pore former in the cathode. The cathode with three screen-printing coats (thickness 28 ± 7 μm, weight 6.07 ± 0.72 mg cm⁻²) sintering at 1,000 °C for 2 h shows lower polarization resistance of 0.183 Ω cm² at 800 °C. Based on the optimized parameters, the polarization resistances of the L58SCF–Ce_0.8Gd_0.2O_{1.9 – δ} composite cathode display the R _p values of 0.067 Ω cm² at 800 °C, 0.106 Ω cm² at 750 °C, 0.225 Ω cm² at 700 °C, and 0.550 Ω cm² at 650 °C.     

High Level Expression of an Acid-Stable Phytase from <Emphasis Type="Italic">Citrobacter freundii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

To obtain a high level expression of phytase with favorable characteristics, a codon-optimized phytase gene from Citrobacter freundii was synthesized and transferred into Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. After purified by Ni²⁺–NTA agarose affinity column, the characterizations of the recombinant phytase were determined. The recombinant phytase (r-phyC) had two distinct pH optima at 2.5 and 4.5 and an optimal temperature at 50 °C. It retained more than 80% activity after being incubated under various buffer (pH 1.5–8.0) at 37 °C for 1 h. The specific activity, Km, and Vmax values of r-phyC for sodium phytate were 2,072 ± 18 U mg⁻¹, 0.52 ± 0.04 mM, and 2,380 ± 84 U mg⁻¹ min⁻¹, respectively. The enzyme activity was significantly improved by 1 mM of K⁺, Ca²⁺, and Mg²⁺. These characteristics contribute to its potential application in feed industry.     

Identification and analysis of stereoselective drug interactions with low-density lipoprotein by high-performance affinity chromatography

Columns containing immobilized low-density lipoprotein (LDL) were prepared for the analysis of drug interactions with this agent by high-performance affinity chromatography (HPAC). R/S-Propranolol was used as a model drug for this study. The LDL columns gave reproducible binding to propranolol over 60 h of continuous use in the presence of pH 7.4 0.067 M potassium phosphate buffer. Experiments conducted with this type of column through frontal analysis indicated that two types of interactions were occurring between R-propranolol and LDL, while only a single type of interaction was observed between S-propranolol and LDL. The first type of interaction, which was seen for both enantiomers, involved non-saturable binding; this interaction had an overall affinity (nK _a) of 1.9 (±0.1) × 10⁵ M⁻¹ for R-propranolol and 2.7 (±0.2) × 10⁵ M⁻¹ for S-propranolol at 37 °C. The second type of interaction was observed only for R-propranolol and involved saturable binding that had an association equilibrium constant (K _a) of 5.2 (±2.3) × 10⁵ M⁻¹ at 37 °C. Similar differences in binding behavior were found for the two enantiomers at 20 °C and 27 °C. This is the first known example of stereoselective binding of drugs by LDL or other lipoproteins. This work also illustrates the ability of HPAC to be used as a tool for characterizing mixed-mode interactions that involve LDL and related binding agents.     

Anticancer Properties of Highly Purified l-Asparaginase from Withania somnifera L. against Acute Lymphoblastic Leukemia

Withania somnifera L. has been traditionally used as a sedative and hypnotic. The present study was carried out for the purification, characterization, and in vitro cytotoxicity of l-asparaginase from W. somnifera L. l-Asparaginase was purified from the fruits of W. somnifera L. up to 95% through chromatography. The purified l-asparaginase was characterized by size exclusion chromatography, polyacrylamide gel electrophoresis (PAGE), and 2D PAGE. The antitumor and growth inhibition effect of the l-asparaginase was assessed using [3-(4, 5-dimethyl-thiazol-2yl)-2, 5-diphenyl-tetrazolium bromide] (MTT) colorimetric dye reduction method. The purified enzyme is a homodimer, with a molecular mass of 72 ± 0.5 kDa, and the pI value of the enzyme was around 5.1. This is the first report of the plant containing l-asparaginase with antitumor activity. Data obtained from the MTT assay showed a LD₅₀ value of 1.45 ± 0.05 IU/ml. W. somnifera L. proved to be an effective and a novel source of l-asparaginase. Furthermore, it shows a lot of similarity with bacterial l-asparaginases EC-2.     

Competitive sorption of Cu(II) and Eu(III) ions on olive-cake carbon in aqueous solutions—a potentiometric study

The competitive sorption of Cu(II) and Eu(III) ions from aqueous solutions by olive-cake carbon, has been investigated by potentiometry at pH 6, I=0.1 M NaClO₄, 25°C and under normal atmospheric conditions. Evaluation of the experimental data supports the formation of inner-sphere surface complexes and results in the calculation of the formation constant of the surface complexes ((=S–O)₂Cu), which is found to amount log β _Cu=5.3±0.3. Addition of competing Eu(III) ions in the aqueous system leads to replacement of the Cu(II) by the competitor metal ion. Evaluation of the potentiometric data obtained from competition experiments indicates an ion-exchange mechanism. The formation constant of the Eu(III) species sorbed on olive cake carbon is found to be log β _Eu=5.1±0.5. Comparison of the complex formation constants of the olive-cake carbon with the corresponding complex formation constants for of olive cake and humic acid with the two metal ions, indicates that the same type of active sites is responsible for the metal ion complexation on the surface of the different types natural organic matter (e.g. olive-cake carbon, olive-cake and humic acid).     

Laccase production and enzymatic modification of lignin by a novel Peniophora sp

A novel laccase producing Basidiomycete Peniophora sp. (NFCCI-2131) was isolated from pulp and paper mill effluent. The optimal temperature and initial pH for laccase production by the isolate in submerged culture were found to be 30 and 4.6° C, respectively. Maltose (20 g l⁻¹) and tryptone (1.0 g l⁻¹) were the most suitable carbon and nitrogen sources for laccase production. Cu²⁺ (1.0 mM) and veratryl alcohol induced maximum laccase production giving 6.6 and 6.07 U/ml laccase activity, respectively. Under optimised culture conditions, 7.6 U/ml activity was obtained, which was 2.4 times higher than that was achieved in basal medium. An evaluation of the delignification efficiency of the crude enzyme in the presence of redox mediators [2,2’-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) and (1-hydroxybenzotriazole)] revealed structural changes in lignin and existence of many active centres for both chemical and biological degradation of lignin following enzymatic treatment.     

Effects of Temperature and Common Ions on Binding of Puerarin to BSA

The effects of temperature and common ions on binding of puerarin to bovine serum albumin (BSA) are investigated. The binding constants (K _a) between puerarin and BSA are 1.13×10⁴ L⋅mol⁻¹ (20 °C) and 1.54×10⁴ L⋅mol⁻¹ (30 °C), and the number of binding sites (n) is (0.95±0.02). However, at a higher temperature (40 °C) the stability of the puerarin–BSA system decreases, which results in a lower binding constant (1.58×10³ L⋅mol⁻¹) and number of binding sites (n=0.73) of the puerarin–BSA system. However, the presence of Cu²⁺ and Fe³⁺ ions increases the binding constants and the number of binding sites in the puerarin–BSA complex.     

Mechanistic studies on the intramolecular electron transfer in an adduct species of the oxo-centred trinuclear iron(III) cation and <Emphasis Type="SmallCaps">l</Emphasis>-ascorbic acid in aqueous solution

The kinetics of the intra-molecular electron transfer of an adduct of l-ascorbic acid and the [Fe₃^IIIO(CH₃COO)₆(H₂O)₃]⁺ cation in aqueous acetate buffer was studied spectrophotometrically, over the ranges 2.55 ≤ pH ≤ 3.74, 20.0 ≤ θ ≤ 35.0 °C, at an ionic strength of 0.50 and 1.0 mol dm⁻³ (NaClO₄). The reaction of l-ascorbic acid and the complex cation involves the rapid formation of an adduct species followed by a slower reduction in the iron centres through consecutive one-electron transfer processes. The final product of the reaction is aqueous iron(II) in acetate buffer. The proposed mechanism involves the triaqua and diaqua-hydroxo species of the complex cation, both of which form adducts with l-ascorbic acid. At 25 °C, the equilibrium constant for the adduct formation was found to be 86 ± 15 and 5.8 ± 0.2 dm³ mol⁻¹ for the triaqua and diaqua-hydroxo species, respectively. The kinetic parameters derived from the rate expression have been found to be: k ₀ = (1.12 ± 0.02) × 10⁻² s⁻¹ for the combined spontaneous decomposition and k ₁ = (4.47 ± 0.06) × 10⁻² s⁻¹ (ΔH ₁^‡ = 51.0 ± 2.3 kJ mol⁻¹, ΔS ₁^‡ = −100 ± 8 J K⁻¹ mol⁻¹), k ₂ = (4.79 ± 0.38) × 10⁻¹ s⁻¹ (ΔH ₂^‡ = 76.5 ± 0.8 kJ mol⁻¹, ΔS ₂^‡ = 6 ± 3 J K⁻¹ mol⁻¹) for the triaqua and diaqua-hydoxo species, respectively.     

Electrochemistry at cobalt(II)tetrasulfophthalocyanine-multi-walled carbon nanotubes modified glassy carbon electrode: a sensing platform for efficient suppression of ascorbic acid in the presence of epinephrine

Electrochemistry of water-soluble cobalt(II) tetrasulfophthalocyanine (CoTSPc) electrodeposited on glassy carbon nanotube pre-modified with acid-functionalized multi-walled carbon nanotubes (MWCNT) is described. Both charge transfer resistances toward [Fe(CN)₆]^3−/4− redox probe and electrocatalytic responses toward epinephrine (EP) detection follow the trend: bare GCE < GCE-MWCNT < GCE-CoTSPc < GCE-MWCNT-CoTSPc. EP analysis was then carried out in details using GCE-MWCNT-CoTSPc. The catalytic rate constant value k _ch = 2.2 × 10⁷ (mol cm⁻³)⁻¹ s⁻¹ was obtained from rotating disk electrode experiment. Interestingly, GCE-MWCNT-CoTSPc efficiently suppressed the detection of ascorbic acid (the natural interference of neurotransmitters in physiological conditions) showing good sensitivity (0.132 ± 0.003 A l mol⁻¹), limit of detection (4.517 × 10⁻⁷ mol l⁻¹), and quantification (15.056 × 10⁻⁷ mol l⁻¹). In addition, GCE-MWCNT-CoTSPc was conveniently used to determine EP in epinephrine hydrochloric acid injection with recovery of 101.1 ± 2.2%.