Synthesis of 2-butyl-4,9-decadienoic and 2-butyl-4,9-dimethyl-4,9-decadienoic acids,structural analogues of cygerol

2-Butyl-4,9-decadienoic and 2-butyl-4,9-dimethyl-4,9-decadienoic acids, structural isomers of 2-cyclohexylgeranylacetic acid, which is an active component of the wound healing ointment cygerol, have been synthesized. Hydrocarbon chains C₁₀ have been obtained by the one-pot method of formation of long-chain hydrocarbons, namely, by the telomerization reaction of 1,3-dienes with nucleophiles catalyzed by palladium complexes. A heterogeneous palladium-zeolite catalyst has been used for the first time in telomerization of isoprene with piperidine.     

Synthesis of benzo[f]isoindole-4,9-diones

A synthesis of benzo[f]isoindole-4,9-diones 1 is presented starting from the reaction of 2,3-bis(bromomethyl)-1,4-dimethoxynaphthalene 15 with primary amines affording 2,3-bis(aminomethyl)-1,4-dimethoxynaphthalenes 14, which could be converted by CAN-mediated oxidation in one step to benzo[f]isoindole-4,9-diones 1. An alternative synthesis of benzo[f]isoindole-4,9-diones 1 starts from 2,3-bis(bromomethyl)-1,4-naphthoquinone 9 via 2,3-dihydrobenzo[f]isoindoles 10 which spontaneously oxidize.     

Synthesis of 2-Aryl-3-hydroxy-4,9-dihydrocyclohepta[b]pyran-4,9-diones

3-(2-Bromoacetyl)tropolone ( 1 ) reacted with benzaldehydes 2a-g in the pressence of alkali at low temperature to give 2-aryl-3-hydroxy-4,9-dihydrocyclohepta[b]pyran-4,9-diones 3a-g in good yields.     

Reactivity of 4,9-diazapyrene

Heating 5,10-dimethyl-4,9-diazapyrene with nitric acid to 200°C does not bring about disruption of the heteroring but leads to the formation of nitro derivatives of 5,10-dioxo-4,5,9,10-tetrahydro-4,9-diazapyrene. 4,9-Diazapyrene is a weak base that forms quaternary salts only under severe conditions. Piperidine replaces two chlorine atoms in 5,10-dichloro-4,9-diazapyrene, whereas only monosubstitution occurs in the case of 1,6-dibromo-5,10-dimethyl-4,9-diazapyrene. Calculations by the Hückel MO method, in agreement with the experimental data, characterize 4,9-diazapyrene as a strong electron acceptor and indicate that the effect of conjugation is propagated primarily along the periphery of the molecule rather than between the heterorings.     

A New and simple synthesis of 2-aryl-4,9-dihydrocyclohepta[b]pyran-4,9-diones

3-Acetyltropolone ( 1 ) reacted with 2-methoxybenzaldehyde ( 2a ) in the presence of ethyl orthoformate and perchloric acid to afford 2-(2-methoxyphenyl)-4,9-dihydrocyclohepta[b]pyran-4,9-dione ( 3a ). The reactions with 3,4-dimethoxybenzaldehyde ( 2b ), vanillin ( 2c ), and piperonal ( 2d ) gave respectively the corresponding products 3b-d . The reaction with benzaldehyde ( 2e ) gave uncyclized 3-cinnamoyltropolone ( 4 ).     

A new synthesis of naphtho[2,3-C]pyrroles. Conversion of naphtho[2,3-C]thiophene-4,9-diones to naphtho[2,3-C]pyrrole-4,9-diones

A series of 2-substituted-4,9-dihydronaphtho[2,3-c]pyrrole-4,9-diones was prepared by the reaction of 4,9-dihydronaphtho[2,3-c]thiophene-4,9-diones with primary amines under mild conditions. The presence of halogen in the naphtho[2,3-c]thiophene-4,9-dione and the presence of hydroxyl, ether, or tertiary amine functions in the amine reagent do not interfere with the course of the reaction.     

Synthesis and characterization of tough polycyclic polyamides containing 4,9-Diamantyl moieties in the main chain

A series of new polyamides were synthesized by direct polycondensation of the 4,9-diamantane dicarboxylic acid ( I ) with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) containing lithium chloride. The polyamides had inherent viscosities of 0.56–1.85 dL/g. Dynamic mechanical analysis revealed the polymers IIIa–IIId to have main melting transitions at 403, 431, 423, and 452°C, respectively. Moreover, these polymers were quite stable at high temperatures and maintained good mechanical properties (G′ = ca. 10⁸ Pa) up to temperatures close to the main transition well above 400°C. Although the polyamides contained rigid 4,9-diamantyl moieties in the main chain, the tensile properties of the polyamides showed toughness. Elongations of polyamides IIIa and IIIb reached 38.3 and 31.7%, respectively, before breaking. A glass transition was not observed. However, polyamide IIIc shows a melting transition with a sharp endothermic peak at 423°C by DSC measurement. Additionally, the introduction of 4,9-diamantyl units into the polyamide backbone resulted in polyamides with high thermal stability and good mechanical properties. © 1996 John Wiley & Sons, Inc.     

矢车菊中倍半萜 - 4,9-二氧-红没药-2,7(14), 10-三烯及其类似物的合成

红没药烯及其含氧化合物是自然界中存在的一类单环倍半萜,它是利用单萜合成倍半萜的实例。1986年Jakupovic等报道从植物矢车菊中提取出新的倍半萜——4,9-二氧-红没药-2,7(14),10-三烯及它的异构化产物4,9-二氧-红没药-2,7 E,10-三烯。我们以(-)-香芹酮(1 a)和( )-二氢香芹酮(1b)作原料合成了4,9-二氧-红没药-2,7(14),10-三烯(4 a),它的二氢类似物4,9-二氧-红没药-7(14),10-二烯(4b)和4,9-二氧-     

A new synthetic route to 2-substituted naphtho[2,3-b]furan-4,9-dione2-Substituted Naphtho[2,3-b]furan-4,9-dione

4,9-Dimethoxynaphtho[2,3-b]furan 9 was obtained in 91% yield via the reductive methylation of naphtho[2,3-b]furan-4,9-dione 2 . After treatment of 9 with butyllithium, the mixture was allowed to react with N,N-dimethylacetamide, followed by oxidization with cerium(IV) diammonium nitrate to give 2-acetylnaphtho[2,3-b]furan-4,9-dione 1 . 2-Formylnaphtho[2,3-b]furan-4,9-dione 13 and 2-trimethylsilyl-naphtho[2,3-b]furan-4,9-dione 14 were also obtained from 9 by a similar method. The halodesilylations of 14 easily gave 2-iodonaphtho[2,3-b]furan-4,9-dione 16 , 2-bromonaphtho[2,3-b]furan-4,9-dione 17 , and 2-chloronaphtho[2,3-b]furan-4,9-dione 18 in 82%, and 93% and 83% yield, respectively. Furthermore, the nitrodesilylation of 14 gave 2-nitronaphtho[2,3-b]furan-4,9-dione 3 in 77% yield.     

Reactions of 4,4,9-trimethyl-4,9-dihydro-4-silanaphtho[3,2-b]thiophen-9-one with nucleophilic and electrophilic reagents

We have studied the reaction of 4,4,9-trimethyl-4,9-dihydro-4-silanaphtho[3,2-b]-thiophen-9-one with organometallic compounds, lithium aluminum hydride, sodium borohydride, aniline, and acetyl nitrate. We have obtained secondary and tertiary dihydrosilanaphtho[3,2-b]thiophen-9-ols and 9-phenyliminodihydrosilanaphtho[3,2-b]thiophene. We have established that nitration of dihydrosilanaphthothiophen-9-one occurs at the position of the thiophene moiety.Russian University of International Friendship, Moscow 117923. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 621–625, May, 1998.     

Synthesis of 1H-naphth[2,3-d]imidazole-4,9-diones by acid catalyzed cyclization of 2-Acylamino-3-amino-1,4-naphthoquinones

The conversion of 2-acylamino-3-amino-1,4-naphthoquinones (II) to the corresponding 2-substituted 1H-naphth[2,3-d]imidazole-4,9-diones (I) under both alkaline and acid catalyzed conditions has been effected and the results compared. Treatment of 3-(4′-chlorobutanonyl-amino)-3-amino-1,4-naphthoquinone (He) with aqueous ethanolic sodium hydroxide solution gives 1,2-butanonaphth[2,3-d]imidazole-4,9-dione (V); whereas, treatment of lie with refluxing formic acid gave 2-(4′-chlorobutyl)-1H-naphth[2,3-d]imidazole-4,9-dione. Treatment of 2-substi-tuted 1H-naphth[2,3-d]imidazole-4,5-diones in DMF with alkyl halides in the presence of potassium carbonate affords the expected 1,2-disubstituted naphth[2,3-d]imidazole-4,9-diones (VI). The spectral properties of I, II, V and VI as well as those of some 2-acylamino-3-chloro-1,4-naphthoquinones IV are discussed.     

Synthesis and application of ethyl 2-arylazo-4,9-dioxonaphtho[2,3-b]thiophene-3-carboxylate

Synthesis of ethyl 2-arylazo-4,9-dioxonaphtho[2,3-b]thiophene-3-carboxylate was achieved by diazotization of ethyl 2-amino-4,9-dioxonaphtho[2,3-b]thiophene-3-carboxylate and coupling with selected N,N-dialkylanilines. The key intermediate ethyl 2-amino-4,9-dioxonaphtho[2,3-b]thiophene-3-carboxylate was synthesized by the condensation of sodium salt of ethyl cyanoacetate with 2,3-dichloro-1,4-naphthoquinone. Ethyl 2-arylazo-4,9-dioxonaphtho[2,3-b]thiophene-3-carboxylate were applied on polyester fibers as disperse dyes and their dyeing properties were studied.     

Twista-4,9-diene. Preliminary communication

A synthesis of twista-4,9-diene ( 17 ) from tricyclo[4.3.1.0^3,8]dec-4-en-10-one ( 2 ) is described.     

Nucleophilic substitutions of 2-chloronaphtho[2,3-b]furan-4,9-dione with amines

2-Chloronaphtho[2,3-b]furan-4,9-dione 4 was allowed to react with pyrrolidine to produce 2-(1-pyrrolidinyl)naphtho[2,3-b]furan-4,9-dione 8 in 64% yield. In a similar manner, the reaction of 4 with cyclic amines (piperidine, morpholine, 4-substituted piperazines, etc.) gave the desired compounds. 2-Dimethylaminonaphtho[2,3-b]furan-4,9-dione 20 and 2-propylaminonaphtho[2,3-b]furan-4,9-dione 23 were obtained from the reactions of 4 with amines in 67% and 48% yields, respectively. Furthermore, the reactions of 4 with acyclic amines (diethylamine, dipropylamine, isopropylamine, butylamine, etc.) gave the desired compound. Compound 4 was treated with sodium azide to give 2-azidonaphtho[2,3-b]furan-4,9-dione 28 in 42% yield. All these nucleophilic substitutions were carried out at room temperature. It was found that 4 showed high reactivity for amines. Unexpectedly, 2-morpholinonaphtho[2,3-b]furan-4,9-dione 13 was obtained from the reaction of 4 with 1-morpholino-1-cyclohexene.     

Electronic and cytotoxic properties of 2-amino-naphtho[2,3-b]furan-4,9-diones

The electronic properties of a new set of cytotoxic 2-amino-naphtho[2,3-b]furan-4,9-dione derivatives (1-8) are evaluated. The electron delocalization of these compounds is described by means of their redox potentials and solvatochromic properties. The large solvatochromism of their intramolecular electron transfer band is analyzed using the linear solvation energy relationship method. In addition, this method determined the importance of the molecular environment, quantifying the interactions that compounds (1-8) establish with their surrounding media, with the capacity of acting as hydrogen-bond acceptors (HBA) and hydrogen-bond donors (HBD) and the dipolarity/polarizability being the most significant ones. As a result, a relationship between the electronic and the cytotoxic properties of these compounds is proposed.     

Synthesis and base-catalyzed cleavage of 1-aryl-4,9-dioxo-1H-naphtho[2,3-d][1,2,3]triazole 2-oxides

A method was developed for the synthesis of 1H-1-arylnaphtho[2,3-d][1,2,3]triazole-4,9-dione 2-oxides based on 2-arylamino-3-chloro-1,4-naphthoquinones. The reaction of 1H-1-arylnaphtho[2,3-d][1,2,3]triazole-4,9-dione 2-oxides with an ethanolic alkali solution affords 2-{[1-(aryl)-2-oxido-1H-1,2,3-triazol-4-yl]carbonyl}benzoic acids.     

The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione and its facile conversion to 2-[2-(dimethylamino)ethyl]- 5-[2-(dimethylamino)ethylamino]-8-fluoro-naphtho[2,3-c] pyrrole-4,9-dione

The synthesis of 5,8-difluoronaphtho[2,3-c]thiophene-4,9-dione ( 2a ) has been accomplished. Treatment of 2a with 2,2-dimethylaminoethylamine leads to 2-[2-(dimethylamino)ethyl]-5-[2-(dimethylamino)ethylamino]-8-fluoronaphtho[2,3-c]pyrrole-4,9-dione ( 6 ).     

Preparation of allenephosphoramide and its utility in the preparation of 4,9-dihydro-2h-benzo[f]isoindoles

Allenephosphoramides were prepared from propargyl alcohols and diethyl arylphosphoramides using Yb(OTf)(3) as catalyst. In the presence of iodine, 4,9-dihydro-2H-benzo[f]isoindole derivatives could be efficiently constructed from the same two starting materials in a single step.     

4,9‐Dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione functionalized copolymers for organic photovoltaic devices

The synthesis of conjugated polymers 1 – 5 functionalized with 4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione in the backbone is reported and their use in the construction of organic solar cells is demonstrated. Increasing the molar ratio of 2,7‐dibromo‐3,8‐dihexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione, relative to 4,4′‐dihexyl‐5,5′‐dibromo‐2,2′‐bithiophene, in the copolymer synthesis significantly lowers the solubility of these polymers. The incorporation of highly conjugated 3,8‐dihexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione unit into the polymer backbone has been confirmed by UV–vis absorption. The observation of decreasing quantum yield for the emission in the order of 1 , 2 , 3 is consistent with copolymers with different comonomer content. The power conversion efficiencies of solar cells using blends of these polymers with PCBM ([6,6]‐phenyl C₆₁‐butyric acid methyl ester) were determined to be 0.11% for polymer 1 , 0.33% for 2 , and 0.26% for 3 , respectively. Under identical white light illumination, the power conversion efficiency of the device based on polymer 2 /PCBM as the active layer was three times higher compared to that of device based on polymer 1 /PCBM. Owing to the limited solubility and poor film‐forming ability of polymer 3 , the power conversion efficiency of solar cell based on 3 /PCBM blend is lower than that of 2 /PCBM blend, but is still larger than that of 1 /PCBM blend. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2680–2688, 2008     

Spectral characteristics and acid-base equilibria of 4,9-dihydroxy-5,10-dioxo-4,5,9,10-tetrahydro-4,9-diazapyrene and its 2,7-derivatives

The IR and electronic spectra of 2,7-disubstituted 4,9-dihydroxy-5,10-dioxo-4,5,9,10-tetrahydro-4,9-diazapyrene (R = H, I, NH₂, NO₂, OH) are studied. Analysis of the IR bands shows that, in crystalline form and in neutral and basic solutions, the compounds exist predominantly in the hydroxamic form. It is established that in sulfuric acid solutions the oxygen atoms of the C=O groups are protonated. The spectral characteristics of the neutral and ionized forms of the compounds are determined. The acid ionization constants are measured by potentiometric titration.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 94–99, January, 1993.