Liquid chromatography of phenolic compounds in natural water using on-line trace enrichment

Summary Two packing materials, C18 and PLRP-S, are studied for on-line trace enrichment of phenolic compounds in water. Various precolumns of different internal diameter are also tested and the addition of an ion-pair reagent to increase retention and thus, breakthrough volumes of phenolic compounds, is studied. Best results are obtained when a PLRP-S precolumn is coupled on-line with a C18 analytical column and DAD detector. Addition of TBA considerably increases breakthrough volumes. In contrast, when a C18 precolumn is used, breakthrough volumes are lower and it is impossible to determine TCP and PCP, under the experimental conditions used, because of interference of other nonpolar compounds in the samples. The performance of the system is evaluated with river and tap water and the preconcentration of 10 ml of sample in a PLRP-S precolumn involves a linear range between 1 g 1^–1 and 20 l^–1 and limits of determination between 0.5 g l^–1 and 1 g l^–1 are obtained.     

Fast on-line ultrasound-assisted extraction coupled to a flow injection-atomic absorption spectrometric system for zinc determination in meat samples

A continuous ultrasound-assisted extraction system connected to a flow injection manifold has been used for the on-line determination of zinc in meat samples by flame atomic absorption spectrometry. An experimental design was used for the optimisation of the continuous manifold. This flow injection methodology allowed a sampling frequency of ca. 80 samples per hour with a relative standard deviation for the whole procedure of 0.3% (for a sample containing 163.6 μg g⁻¹ Zn). The detection limit was 0.6 μg g⁻¹ for a sample amount of 5 mg. Accurate results were obtained by measuring certified reference materials (BCR-186 (pig kidney) and BCR-184 (bovine muscle)). The analytical procedure was applied to different real meat samples with satisfactory results.     

Determination of pyrimethanil and kresoxim-methyl in soils by headspace solid-phase microextraction and gas chromatography-mass spectrometry

A method using headspace solid-phase microextraction (HS-SPME) then gas chromatography–mass spectrometry with selected ion monitoring (GC–MS, SIM) has been developed for determination of trace amounts of the fungicides pyrimethanil and kresoxim-methyl in soil and humic materials. Both fungicides were extracted on to a fused-silica fibre coated with 85 m polyacrylate (PA). Response-surface methodology was used to optimise the experimental conditions. For soil samples the linear dynamic range of application was 0.004–1.000 g g^–1 for pyrimethanil and 0.013–1.000 g g^–1 for kresoxim-methyl. The detection limits were 0.001 g g^–1 and 0.004 g g^–1 for pyrimethanil and kresoxim-methyl, respectively. HP-SPME–GC–MS analysis was highly reproducible—relative standard deviations (RSD) were between 6.7 and 12.2%. The method was validated by analysis of spiked matrix samples and used to investigate the presence of pyrimethanil and kresoxim-methyl above the detection limits in soil and humic materials.     

Determination of Phenol in Surface Waters by High-Performance Liquid Chromatography with Sorption Preconcentration

The retention of phenol and its derivatives on Silasorb C₈ and PepRPC ^TMHR 5/5 was studied. Both columns are suitable for the separation of pyrocatechol–phenol–o-cresol(p-cresol)–2,6-xylenol mixtures using mobile phases containing 10–20 vol % of isopropanol and 1% glacial acetic acid in water. A procedure was developed for determining phenol with a detection limit of 4 mg/L (acetonitrile; signal-to-noise ratio, 2; loop volume, 25 L). With preconcentration from 1-L samples in a Diapak-phenol/P cartridge, the procedure allows phenol to be determined in water samples with a detection limit of 4 g/L. The procedure was used in analyses of samples of river and tap water.     

Determination of Benzimidazole Fungicides by HPLC with Fluorescence Detection After Micellar Extraction

An analytical method was developed to determine the benzimidazole fungicides and their residues (benomyl, carbendazim, thiabendazole and fuberidazole) in real water samples. Analyses were performed by reverse phase (RP) HPLC with direct fluorescence detection with mobile phase methanol:water, 40:60 (v/v) with 0.6% (v/v) ammonia. The extraction of analytes from water samples was performed with the use of micellar systems. Specifically, oligoethylene glycol monoalkyl ether (Genapol X-080) and polyoxyethylene 10 lauryl ether (POLE) were used as extractants. The recoveries of fungicides obtained in spiked water samples ranged from 68% to 94% for Genapol and from 68% to 96% for POLE. The limit of detection (LOD) was lower than 6 g L^–1 for carbendazim, 7 g L^–1 benomyl, 0.15 g L^–1 for thiabendazole and 0.01 g L^–1 for fuberidazole in both surfactants.     

Rapid analysis of pyrethroids in whole urine by high-performance liquid chromatography using a monolithic column and off-line preconcentration in a restricted access material cartridge

A rapid high-performance liquid chromatography (HPLC) method using a monolithic column with UV detection at 238 nm was developed for the determination of fenpropathrin, betacyfluthrin, deltamethrin, and permethrin (cis and trans isomers) in whole urine. The method is based on the use of a monolithic chromatographic column and a restricted access material (RAM) cartridge for sample preparation. The mobile phase was water/acetonitrile (42:58 v/v), the flow rate was 3 mL min^–1, and chromatographic separation was carried out in 10 min. The separation of cis and trans isomers of permethrin was also possible under the above-mentioned conditions. Detection limits in reconstituted whole urine samples were between 0.9 g L^–1 for betacyfluthrin and 4.4 g L^–1 for fenpropathrin and trans-permethrin. Recoveries for urine samples spiked with different amounts of pyrethroids (between 19 g L^–1 and 75 g L^–1) were in the 70±6 to 90±7% range.     

Solid-phase reactor flow-injection on-line oxidizing spectrofluorimetry for determination and dissolution studies of folic acid

A simple, sensitive and specific flow-injection spectrofluorimetric method has been developed for the determination of folic acid in pharmaceuticals. The method is based on use of a lead dioxide solid-phase reactor for on-line oxidation of folic acid into a strongly fluorescent compound with a maximum excitation wavelength of 281 nm and an emission wavelength of 450 nm. Under optimum conditions the fluorescence intensity of oxidation product is proportional to the concentration of folic acid over the range 0.008–2.5 g mL^–1. The detection limit is 0.0001 g mL^–1, the relative standard deviation is 0.85% for 11 replicate determinations of 0.05 g mL^–1 folic acid, and the sample throughput is 20 h^–1. In combination with an on-line filter and dilution, an automated drug-dissolution system was established. The proposed method has been successfully applied to the determination of folic acid in pharmaceutical preparations and dissolution testing.     

Flow injection method for the fluorimetric determination of Zn with 8-(benzenesulphonamido) quinoline

The development of a fluorimetric method for the determination of zinc, based on the fluorescence of the zinc-8-(benzenesulphonamido) quinoline chelate in a micellar medium of sodium dodecylsulfate, is reported. The detection limit is 0.2 g l^–1, the working range is 0.5–700 g l^–1, and the sample throughput is 145 h^–1. The method was evaluated for the determination of zinc in food samples.A batch procedure for the simultaneous determination of zinc and cadmium, based on the synchronous and derivative spectra, is also proposed.     

Determination of sulfur and selected trace elements in metallothionein-like proteins using capillary electrophoresis hyphenated to inductively coupled plasma mass spectrometry with an octopole reaction cell

The determination of sulfur in biologically relevant samples such as metalloproteins is described. The analytical methodology used is based on robust on-line coupling between capillary electrophoresis (CE) and octopole reaction cell inductively-coupled plasma mass spectrometry (ORC–ICP–MS). Polyatomic ions that form in the plasma and interfere with the determination of S at mass 32 are minimised by addition of xenon to the collision cell. The method has been applied to the separation and simultaneous element-specific detection of sulfur, cadmium, copper, and zinc in commercially available metallothionein preparations (MT) and metallothionein-like proteins (MLP) extracted from liver samples of bream (Abramis brama L.) caught in the river Elbe, Germany. Instrumental detection limits have been calculated according to the German standard procedure DIN 32645 for the determination of sulfur and some simultaneously measured trace elements in aqueous solution. For sulfur detection limits down to 1.3 g L^–1 (³⁴S) and 3.2 g L^–1 (³²S) were derived. For the other trace elements determined simultaneously detection limits ranging from 300 ng L^–1 (⁵⁸Ni) to 500 ng L^–1 (⁶⁶Zn, ⁵⁵Mn) were achieved. For quantification of sulfur and cadmium in a commercially available MT preparation under hyphenated conditions the use of external calibration is suggested. Finally, the need for proper sample-preparation technique will be discussed.     

Determination of lead in bone tissues by axially viewed inductively coupled plasma multichannel-based emission spectrometry

A new procedure for determining low levels of lead in bone tissues has been developed. After wet acid digestion in a pressurized microwave-heated system, the solution was analyzed by inductively coupled plasma multichannel-based emission spectrometry. Internal standardization using the Co 228.615 nm reference line was chosen as the optimal method to compensate for the matrix effects from the presence of calcium and nitric acid at high concentration levels. The detection limit of the procedure was 0.11 g Pb g^–1 dry mass. Instrumental precision at the analytical concentration of ~10 g l^–1 ranged from 6.1 to 9.4%. Precision of the sample preparation step was 5.4%. The concentration of lead in SRM 1486 (1.32±0.04 g g^–1) found using the new procedure was in excellent agreement with the certified level (1.335±0.014 g g^–1). Finally, the method was applied to determine the lead in various fish bone tissues, and the analytical results were found to be in good agreement with those obtained through differential pulse anodic stripping voltammetry. The method is therefore suitable for the reliable determination of lead at concentration levels of below 1 g g^–1 in bone samples. Moreover, the multi-element capability of the technique allows us to simultaneously determine other major or trace elements in order to investigate inter-element correlation and to compute enrichment factors, making the proposed procedure particularly useful for investigating lead occurrence and pathways in fish bone tissues in order to find suitable biomarkers for the Antarctic marine environment.     

Analysis of high-purity reagents using automatic on-line column preconcentration-separation and electrothermal atomic absorption spectrometry

Summary A fully automatic flow-injection on-line column preconcentration and separation procedure for electrothermal atomic absorption spectrometry is described for the determination of cadmium and lead in high-purity reagents. A microcolumn with 9 L of solid sorbent, introduction of air prior to elution, and use of methanol as the eluent made it possible to elute the sorbed analyte quantitatively with only 80 L of solvent. The total eluate volume was transferred into the graphite tube which was pre-heated to 80°C using a flow rate of 0.08 mL min^–1 which allowed the solvent to evaporate in part during eluate introduction. The efficiency of the total procedure was 0.63 and 0.65, and the enrichment factor was 62 and 64 for cadmium and lead, respectively, compared with the direct introduction of 30 L of an aqueous solution. The sample throughput was 13 h^–1 for a sample loading time of 60 s and the detection limits (3 ) were 0.7 and 4.5 ng L^–1 for cadmium and lead, respectively. The relative standard deviation of the entire procedure in the optimum working range was typically around 3% (n=6). A number of high purity (suprapure) and analytical grade (pro analysi) reagents were analyzed, and spiking experiments resulted in recoveries of 97–104%.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthdayOn leave from Jiangsu Institute of Petrochemical Technology, Changzhou, Jiangsu, China     

Use of solid-phase extraction to eliminate interferences in the determination of mercury by flow-injection CV AAS

Solid-phase extraction with two-step elution has been developed for effective elimination of copper and iron interference with mercury determination by flow-injection cold vapour atomic absorption spectrometry (CV AAS). Sodium tetrahydroborate(III) was used as reducing agent. Cation-exchanger Dowex 50Wx4 was applied for the sorption of mercury and both interfering ions. In the first step elution of Cu(II) and Fe(III) was performed using 0.5 mol L^–1 KF solution. Then mercury was eluted with 0.1% thiourea in 8% HCl. The detection limit (3) for Hg(II) was 27 ng L^–1. The expanded uncertainty estimated for the whole procedure was about 6%. The accuracy of the proposed method was evaluated by determination of the recovery of known amount of mercury added to mineral, spring, and tap waters, and by analysis of a certified reference material BCR-144R (sewage sludge).     

Determination of ametryn in soils via microwave-assisted solvent extraction coupled to anodic stripping voltammetry with a gold ultramicroelectrode

An extraction-anodic adsorptive stripping voltammetric procedure using microwave-assisted solvent extraction and a gold ultramicroelectrode was developed for determining the pesticide ametryn in soil samples. The method is based on the use of acetonitrile as extraction solvent and on controlled adsorptive accumulation of the herbicide at the potential of 0.50 V (vs. Ag/AgCl) in the presence of Britton-Robinson buffer (pH 3.3). Soil sample extracts were analysed directly after drying and redissolution with the supporting electrolyte but without other pre-treatment. The limit of detection obtained for a 10 s collection time was 0.021 g g^–1. Recovery experiments for the global procedure, at the 0.500 g g^–1 level, gave satisfactory mean and standard deviation results which were comparable to those obtained by HPLC with UV detection.     

Time-based on-line preconcentration cold vapour generation procedure for ultra-trace mercury determination with inductively coupled plasma atomic emission spectrometry

A time-based sequential dispensing on-line column preconcentration procedure for mercury determination at trace levels by cold vapour generation inductively coupled plasma atomic emission spectrometry (CV-ICP-AES), by means of a unified module of a preconcentration column and a gas–liquid separator (PCGLS) is described. The complex of mercury formed on-line with ammonium pyrrolidine dithiocarbamate (APDC) is retained on the surface of the hydrophobic poly(tetrafluoroethylene) (PTFE) turnings, which are packed into the lower compartment of the PCGLS. Subsequently, mercury vapour is generated directly on the PTFE turnings by reductant SnCl₂ and separated from the liquid mixture via the PCGLS by argon purge gas. The outlet of the PCGLS is connected directly to the torch adapter of the plasma without the normal spray chamber and nebulizer. With 60-s preconcentration time and 12.0 mL min^–1 sample flow rate, the sampling frequency is 30 h^–1. The calibration curve is linear over the concentration range 0.02–5.0 g L^–1, the detection limit (c_L) is 0.01 g L^–1 and the relative standard deviation (s_r) is 3.1% at the 1.0 g L^–1 level. The proposed method was evaluated by analysis of BCR CRM 278 (Mytilus Edulis) reference material and applied to the determination of total mercury in digested urine, blood and hair samples.     

Liquid Chromatographic Determination of Sulfamonomethoxine, Sulfadimethoxine, and their N 4-Acetyl Metabolites in Chicken Plasma

An environmentally-friendly method has been established for simultaneous determination of sulfamonomethoxine, sulfadimethoxine, and their N⁴-acetyl metabolites in chicken plasma. The sample is prepared by mixing with 4 mol L^–1 ammonium sulfate solution then centrifugation, and analysis is performed by high-performance liquid chromatography (HPLC) on a polyethylene glycol reversed-phase column with 0.001 mol L^–1 sodium acetate solution as mobile phase and photodiode-array detection. Average recoveries from samples spiked with 0.1, 0.5, and 1.0 g mL^–1 of each drug were >78% and relative standard deviations were within 4%. The practical quantitation limits were 0.09 g mL^–1. No organic solvents or hazardous reagents were used at any stage of the analysis.     

Microdialysis sampling and high-performance liquid chromatography with chemiluminescence detection for in-vivo on-line determination and study of the pharmacokinetics of levodopa in blood

A simple, reliable, and reproducible method for in-vivo on-line separation and determination of levodopa has been based on microdialysis then high-performance liquid chromatography with chemiluminescence detection. The perfusate is perfused at a flow rate of 5 L min^–1. The concentration of levodopa in the dialysate is determined on line with a chemiluminescence system. The dialysate sample volume is approximately 20 L. The response of the system is linearly related to the concentration of levodopa in the range 1×10^–8 to 1×10^–6 g mL^–1 (r²=0.9995) with a detection limit (3) of 3×10^–9 g mL^–1 and sample throughput of 12 h^–1; RSD is 2.8% (n=11). The method has been successfully used to study the pharmacokinetics of levodopa in vivo; the values of the pharmacokinetics parameters C_max, AUC_0–t and T_max were 16.60, 20.92 ng mL^–1, and 90 min, respectively.     

Development and application of a simple routine method for the determination of selenium in serum by octopole reaction system ICPMS

The aim of the study was to develop an inductively coupled plasma mass spectrometry (ICPMS) method for robust and simple routine determination of selenium in serum. Polyatomic interferences on ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were removed by applying an octopole reaction system ICPMS with the reaction cell pressurized with H₂ gas. We developed a novel simple optimization routine for the H₂ gas flow based on a signal-to-noise ratio (SNR) calculation of the selenium signal measured in a single selenium standard. The optimum H₂ flow was 2.9 mL min^–1. The selenium content in serum was determined after a 50-fold dilution with 0.16 M HNO₃ and quantified by using addition calibration and gallium as an internal standard. The method detection limit was 0.10 g L^–1 for ⁷⁶Se and ⁷⁸Se and 0.13 g L^–1 for ⁷⁷Se. Human serum samples from a case-control study investigating if selenium was associated with risk of colorectal adenoma were analyzed. The average selenium concentration for the control group (n=768) was 137.1 g L^–1 and the range was 73.4–305.5 g L^–1. The within-batch repeatability (a batch is ten samples) estimated from 182 replicate analyses was 6.3% coefficient of variation (CV), whereas the between-batch repeatability was 7.4% CV estimated from 361 replicates between batches. The method accuracy was evaluated by analysis of a human serum certified reference material (Seronorm Serum level II, Sero A/S, Norway). There was a fairly good agreement between the measured average of 145±3 g L^–1 (n=36) and the certified value of 136±9 g L^–1. In addition the method was successfully applied for analysis of zinc serum concentrations without further optimization. For the Seronorm certified reference material a value of 911±75 g L^–1 (n=31) for zinc was obtained, which corresponds well to the certified zinc value of 920±60 g L^–1.     

Determination of Endocrine Disruptors in Environmental Water Samples by Stir Bar Sorptive Extraction-Liquid Desorption - Large Volume Injection-Gas Chromatography

A method based on stir bar sorptive extraction with liquid desorption combined with gas chromatography and mass spectrometry detection has been developed to determine a group of endocrine disruptors in water samples. Large volume injection was used with a programmed temperature vaporiser injector in gas chromatography to enhance sensitivity. The parameters affecting stir bar sorptive extraction and large volume injection were optimised. The limits of quantification in the full scan mode were between 0.02 and 0.2 g L^–1 and the limits of detection were between 0.005 and 0.02 g L^–1 for river water samples. The reproducibility between days of the method (n=3) for river water samples spiked at 0.2 g L^–1 was below 15%. The performance of the method was checked with several water samples from the sea, and effluent and influent sewage treatment plants. We found 4-tert-octylphenol, benzylbutyl phthalate and bis(2-ethylhexyl) adipate in all the water samples analysed at levels between 0.02–14.04 g L^–1. Diazinon was found in only one effluent wastewater sample at 0.16 g L^–1.Acknowledgements This work was supported by the Ministerio de Ciencia y Tecnologia (projects AMB1999-0875 and PPQ2001-1805-CO3). We would like to thank Dr P. Sandra for kindly providing the stir bars.     

Cholinesterase sensors based on screen-printed electrodes for detection of organophosphorus and carbamic pesticides

Cholinesterase sensors based on screen-printed electrodes modified with polyaniline, 7,7,8,8-tetracyanoquinodimethane (TCNQ), and Prussian blue have been developed and tested for detection of anticholinesterase pesticides in aqueous solution and in spiked grape juice. The influence of enzyme source and detection mode on biosensor performance was explored. It was shown that modification of the electrodes results in significant improvement of their analytical characteristics for pesticide determination. Thus, the slopes of the calibration curves obtained with modified electrodes were increased twofold and the detection limits of the pesticides were reduced by factors of 1.6 to 1.8 in comparison with the use of unmodified transducers. The biosensors developed make it possible to detect down to 2×10^–8 mol L^–1 chloropyrifos-methyl, 5×10^–8 mol L^–1 coumaphos, and 8×10^–9 mol L^–1 carbofuran in aqueous solution and grape juice. The optimal conditions for grape juice pretreatment were determined to diminish interference from the sample matrix.Abbreviations ChE Cholinesterase - TCNQ 7,7,8,8-Tetracyanoquinodimethane - ChO Choline oxidase - AChE Acetylcholinesterase - BChE Butyrylcholinesterase - BSA Bovine serum albumin - 2-PAM 2-Pyridine aldoxime methiodide     

Multi-residue procedure for the analysis of pesticides in groundwater: Application to samples from the comunidad Valenciana,Spain

Summary A simple multi-residue procedure has been developed and applied to the analysis of pesticides in groundwater samples from the Comunidad Valenciana, a predominantly agricultural area on the Mediterranean coast of Spain. The procedure includes a liquid-liquid extraction, after addition of NaCl on the samples, and a subsequent analysis by capillary gas chromatography using a dual detection system with electron capture and nitrogen-phosphorous detectors. This allows the determination of more than 30 compounds (organophosphorous, organochlorine and pyrethroid pesticides) at the low ppb (g l^–1) levels. Detection limits obtained varied between 0.01 g l^–1 (lindane, fonofos) and 0.5 g l^–1 (cypermethrin). An additional injection of the sample extracts into a gas chromatograph equipped with a column of different polarity and electron capture detector is used for the confirmation of chromatographic peaks. The recommended procedure has been applied to 66 ground water samples. Pesticides, including organophosphorus and organochlorine compounds were detected in 31 of them, in levels ranging from 0.02 to 0.7 g l^–1.