Nd2Fe17-xSbx的化学合成

Nd2Fe14B稀土永磁材料的发现[1,2]促使人们对稀土铁合金的结构和性能进行深入地研究,近年来发现Ln2Fe17金属间化合物中的Fe可以被其他主族或过渡元素部分取代,形成的Ln2Fe17-xMx的磁性质受取代元素的种类和含量的影响很大.一般认为当部分取代使稀土-铁金属间化合物的晶胞体积增加时,材料的内禀磁性可以得到改善,这是因为材料中Fe-Fe距离增加使铁之间的反铁磁相互作用减小造成的.     

新型RE—Fe—N系金属间化合物的结构与磁性

纯二元RE(稀土)-Fe(铁)金属间化合物有两个弱点:一是居里温度低,如Y_2Fe_(17)的T_c只有330K;二是不具有易磁化轴,如RE_2Fe_(17)室温时皆为易磁化面。因此它们不可能作为永磁材料。Nd_2Fe_(14)B的问世,是研制RE-Fe永磁体的一个重大突破。但是,Nd_2Fe_(14)B仍未完全摆脱RE-Fe金属间化合物的通病,它的居里温度不够高,温度稳定性不好,限制了它的广泛应用。近来作为新型RE-Fe永磁材料的研究对象SmTiFe_(11),其居里温度与     

稀土金属间化合物的磁性能

本文概述了稀土金属间化合物的结构并讨论了结构与磁性能的关系。简要介绍了RKKY理论在稀土金属间化合物磁性能研究方面的应用。讨论了稀土—过渡金属间化合物中存在的交换作用的机理,在此基础上对(1∶5)和(2∶17)类型的稀土永磁材料的磁学性能进行了较深入的分析。同时列举了近年来研制的有代表性的稀土永磁材料的主要磁学参数,探讨了今后的发展趋势。     

[(CO)2(C5H5)Fe]2C60的合成与表征

有关 C6 0 取代的金属羰基化合物的研究方兴未艾 .C6 0 作为一个特殊的烯烃 ,以六元环间的碳碳双键提供电子对 ,与过渡金属羰基化合物形成诸如 η2 ,η4 ,η6等结构新颖的化合物约有 40多例 [1～ 5] ,但只有一例是以 Fe为中心原子的 C6 0 取代的金属羰基化合物 ( η2 - C6 0 ) Fe( CO) 4 [1] .本文报道了第一例 C6 0配位的 Fe的双核金属羰基化合物 [( CO) 2 ( C5H5) Fe]2 (η2 - C6 0 ) ,并通过元素分析 ,IR,1H NMR,13CNMR和 XPS进行表征 .1　实验部分[Fe( CO) 2 ( C5H5) ]2 购自 Aldrich公司 .C6 0 纯度为 99% .其余试剂均…     

富铁稀土金属间化合物永磁材料的研究进展

富铁ThMn₁₂型R(Fe, M)₁₂(R=稀土,M=其他元素)和Th₂Ni₁₇/Th₂Zn₁₇型R₂Fe₁₇金属间化合物通常被命名为1-12和2-17型化合物;它们已被开发成为稀土基磁性合金中重要的系列化合物。随着以Sm₂Fe₁₇N_x和R(Fe, M)₁₂N_x(R=Pr, Nd)等氮化物为代表的“间隙原子效应”的发现,以及稀土资源的绿色开采和综合利用的发展,对富铁稀土-过渡金属间化合物的研究成为热点。其中,Sm(Fe, Co)₁₂化合物和间隙原子调制的R(Fe, M)₁₂N(R=Pr, Nd), Sm₂(Fe, M)₁₇N_x等富铁材料的内禀磁性能与作为当前主流应用的高性能永磁材料Nd_2...     

固相配位化学反应研究 XXIII: 一取代基五氰合铁(II)类配合物热分解反应的研究

本文以气相色谱法为主要手段, 配合Mossbauer谱、红外光谱等结构分析方法, 研究了一系列一取代基五氰合铁(II)类配合物Na2[Fe(CN)5L]·mH2O及Na3[Fe(CN)5L']·nH2O(L=NO^+、N2H5^+、enH^+, L'=NH3、H2O、Py)的热分解反应。结果表明所有一取代五氰合铁(II)配合物热分解过程中都形成相同的中间化合物Na4[Fe(CN)6]和Fe2[Fe(CN)6], 各配合物热分解放出取代基L(L')的温度次序与L(L')在光谱化学序列中的次序一致。本文以亚硝基铁氰化钠为代表, 详细讨论了该系列配合物的热分解反应机理以及热稳定性的规律性。     

固相配位化学反应研究 XXIII: 一取代基五氰合铁(II)类配合物热分解反应的研究

本文以气相色谱法为主要手段, 配合Mossbauer谱、红外光谱等结构分析方法, 研究了一系列一取代基五氰合铁(II)类配合物Na2[Fe(CN)5L]·mH2O及Na3[Fe(CN)5L']·nH2O(L=NO^+、N2H5^+、enH^+, L'=NH3、H2O、Py)的热分解反应。结果表明所有一取代五氰合铁(II)配合物热分解过程中都形成相同的中间化合物Na4[Fe(CN)6]和Fe2[Fe(CN)6], 各配合物热分解放出取代基L(L')的温度次序与L(L')在光谱化学序列中的次序一致。本文以亚硝基铁氰化钠为代表, 详细讨论了该系列配合物的热分解反应机理以及热稳定性的规律性。     

固相配位化学反应研究——XXIII.一取代基五氰合铁(Ⅱ)类配合物热分解反应的研究

本文以气相色谱法为主要手段,配合Mossbauer谱、红外光谱等结构分析方法,研究了一系列一取代基五氰合铁(Ⅱ)类配合物Na_2[Fe(CN)_5L]·mH_2O及Na_3[Fe(CN)_5L′]·nH_2O(L=NO~+、N_2H_5~+、onH~+, L′=NH_3、H_2O、Py)的热分解反应。结果表明所有一取代五氰合铁(Ⅱ)配合物热分解过程中都形成相同的中间化合物Na_4[Fe(CN)_6]和Fe_2[Fe(CN)_6],各配合物热分解放出取代基L(L′)的温度次序与L(L′)在光谱化学序列中的次序一致。本文以亚硝基铁氰化钠为代表,详细讨论了该系列配合物的热分解反应机理以及热稳定性的规律性。     

用Diamond TG/DTA热重/差热综合热分析仪在外加磁场下研究磁性材料相转变

介绍综合热分析仪Diamond TG/DTA在磁性材料研究中的应用.提出在外加磁场作用下,得到样品的热重曲线(TG),由TG曲线分析样品磁性相变及样品居里温度变化的原因,看到稀土铁基金属间化合物样品替代的Co元素的站位和元素之间相互作用对居里温度有很大影响.作为一种测量居里温度的方法,拓展Diamond TG/DTA热分析仪应用研究领域.     

手性自旋转换铁(Ⅱ)席夫碱配合物的合成、结构及其磁性研究

通过高氯酸亚铁,4-(咪唑-2-甲醛)丁腈和光学纯苯乙胺衍生物的自组装成功合成了2个纯手性单核自旋转换铁(Ⅱ)化合物fac-Λ-[Fe(R-L1)3](Cl O4)2(1),fac-Λ-[Fe(R-L2)3](Cl O4)2(2)。利用X-射线单晶衍射、元素分析(EA)、红外光谱(IR)、核磁共振氢谱(1H NMR)、紫外光谱(UV)、圆二光谱(CD)等手段对配合物结构进行了表征。X-射线单晶衍射表明在化合物1和2中,铁(Ⅱ)金属中心与3个不对称双齿手性席夫碱配体中的6个氮原子配位形成八面体配位环境。每个结构基元中包含1个[Fe(L)3]2+阳离子和2个高氯酸根阴离子。由于铁(Ⅱ)中心周围手性配体的螺旋协调配位使[Fe(L)3]2+形成单一手性Λ构型。Fe(Ⅱ)-N键长表明配合物1和2中的铁(Ⅱ)在低自旋状态。在[Fe(L)3]2+中,相邻配体中的苯环和咪唑环形成分子内π-π相互作用。配合物1和2通过分子间C-H…π相互作用形成三维超分子结构。CD光谱证实配合物1和2在溶液中的光学活性。磁性测试表明配合物1和2分别在232和250 K发生自旋转换。由于配合物1和2具有相同的手性空间群和类似的堆积方式和分子间相互作用,导致1和2表现出不同自旋转换温度的原因主要是取代基效应。     

Sm2Fe17N3晶体的价电子结构分析和结合能、最强键能计算

由EET理论直接建立了Sm2Fe17N3晶体的价电子结构,同时计算并筛选了晶体的结合能和最强键能,分别为EC^0=14716.8±13.7kJ·mol^-1和Eα=110.1311 kJ·mol^-1。分析计算结果表明:Sm2Fe17N3晶体内共价电子数主要分布在12对由Fe(c1),Fe(c2)和Fe(c3)参与形成的最强键能的键上,由这3种Fe晶位原子形成的共价键键距普遍小于0.3 nm,共价键较强对晶体结合能作主要贡献;并且其结合能相比Sm2Fe17晶体的小得多,解释了Sm2Fe17合金在低温和非真空状态条件下易氧化而经过渗氮后得到的Sm2Fe17N3则表现出常温下结构稳定、化学性能好的特性;计算出N原子参与形成的成键原子对的理论键能值普遍在1 kJ·mol^-1左右,反映出Sm2Fe17N3化合物内在渗氮特性,分析了制备钐铁氮永磁材料过程中Sm2Fe17合金较低温渗氮难、渗氮不稳定和渗氮不均匀的缺陷。     

Solid state reaction synthesis of filled skutterudite compounds (Ce or Y)yFexCo4-xSb12 and the effect of filling atoms Ce or Y on lattice thermal conductivity

The synthesis of filled skutterudite compounds (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12), through a solidstate reaction using chloride of Ce or Y,high purity powder of Co, Fe, and Sb as starting materials,was investigated. (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) (x=0--1.0, y=0--0.15) compounds were obtained at850--1 123 K. The results of Rietveld analysis demonstrate that (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_12synthesized by a solid state reaction possesses a filled skutterudite structure. The filling fraction ofCe or Y obtained by Rietveld analysis agrees well with the composition obtained by chemicalanalysis. The lattice constant of (Ce)_y(Fe)_x(Co)_(4x)(Sb)_(12) increases with increasing substitution of Fe at Cosites, and with an increasing Ce filling fraction in the Sb-dodecahedron voids. The lattice thermalconductivity of (Ce or Y)_y(Fe)_x(Co)_(4x)(Sb)_(12) decreases significantly with an increasing Ce or Y fillingfraction in the voids and with substitution of Fe at Co sites.     

On the oxidation of EuFe4Sb12 and EuRu4Sb12

Rare-earth-filled transition-metal pnictides having the skutterudite-type structure have been proposed for use as high-temperature thermoelectric materials to recover waste heat from vehicle exhaust, among other applications. A previous investigation by this research group of one of the most studied skutterudites, CeFe(4)Sb(12), found that, when exposed to air, this material oxidized at temperatures that are considerably below the proposed maximum operating temperature. Here, by the combined use of TGA, powder XRD, and XANES, it has been found that the substitution of Ce(3+) and Fe(2+) for larger rare-earth and transition-metal elements (Eu(2+) and Ru(2+)) results in a significantly higher oxidation temperature compared to that of CeFe(4)Sb(12). This increase can be related to the increased orbital overlap provided by these larger atoms (Eu(2+) and Ru(2+) vs Ce(3+) and Fe(2+)), enabling the development of stronger bonds. These results show how selective substitution of the constituent elements can significantly improve the thermal stability of materials.     

Mg(5.23)Sm(0.77)Sb4: an ordered superstructure derived from the Mg3Sb2 structure type

The ternary polar intermetallic phase Mg(5.231(8))Sm(0.769(8))Sb4 has been obtained from solid-state reactions at 700-850 degrees C in sealed Ta or Nb containers when the synthetic conditions took into account its characteristic incongruent melting point. The compound crystallizes in the trigonal space group P3 (Z = 1) with a = 4.618(1) A and c = 14.902(6) A in a structure that derives from that of Mg3Sb2 (anti-La2O3 type). This composition appears to be near the lower limit of Sm content, and solutions with appreciably higher Sm contents are also stable [Mg(6-x)SmxSb4, x 相似文献   

CRYSTALLOGRAPHIC STRUCTURE AND MAGNETIC PROPERTIES OF R_(2)Fe_(17)N_(2.4)

By a proper thermal treatment, the nitrogen atoms can enter the R2Fe17 structure. The crystallographic and intrinsic magnetic properties as well as their relationship have been studied by magnetic measurements, X-ray and neutron diffraction techniques. The neutron data indicate that the nitrogen atoms occupy the interstitial sites in the Th2Zn17-type rhom-bohedral structure. The inserting nitrogen atoms are found to dilate the cell volume, increase the Curie temperature and enhance the saturation moment by raising the difference in the electron number between the spin-up and spin-down 3d subbands of the Fe atoms. Furthermore, the nitrogen atoms have an important effect on the magnetocrystallic anisotropy, which results in an easy axis with Sm2Fe17N2.4. All these make Sm2Fe17N2.4 favorable for permanent magnet applications.     

固溶体α－（Fe_（1－x）Sb_x）_2O_3（0≤x≤0．2）气敏材料

用化学共沉淀法在ａ－Ｆｅ＿２Ｏ＿３，中掺入锑离子，Ｘ－射线衍射（ＸＲＤ）分析证实，锑离子可固溶于ｎ型半导体ａ－Ｆｅ＿２Ｏ＿３中形成ａ－（Ｆｅ＿１－ｘＳｂ＿ｘ）＿２Ｏ＿３（０《ｘ《０．２）固溶体。由于锑离子（Ｓｂ￣５＋）部分取代ａ－Ｆｅ＿２Ｏ＿３晶格中Ｆｅ￣３＋的格位，使得该系列材料的电导值增大一个数量级以上，气敏性能明显改善。     

Solid state reaction synthesis of filled skutterudite compounds (Ce or Y)yFexCo4-xSb12 and the effect of filling atoms Ce or Y on lattice thermal conductivity

The synthesis of filled skutterudite compounds (Ce or Y)yFexCo₄-xSb12, through a solid state reaction using chloride of Ce or Y, high purity powder of Co, Fe, and Sb as starting materials, was investigated. (Ce or Y)yFexCo₄-xSb12 (x = 0 1.0,y = 0 0.15) compounds were obtained at 850 1 123 K. The results of Rietveld analysis demonstrate that (Ce or Y)yFexCo₄-xSb12 synthesized by a solid state reaction possesses a filled skutterudite structure. The filling fraction of Ce or Y obtained by Rietveld analysis agrees well with the composition obtained by chemical analysis. The lattice constant of CeyFexCo₄-xSb12 increases with increasing substitution of Fe at Co sites, and with an increasing Ce filling fraction in the Sb-dodecahedron voids. The lattice thermal conductivity of (Ce or Y)yFexCo₄-xSb12 decreases significantly with an increasing Ce or Y filling fraction in the voids and with substitution of Fe at Co sites.     

Elemental content in ground and soluble/instant coffee

The concentration of thirty-four elements in twelve coffee brands has been measured using instrumental neutron activation analysis. The samples investigated included four brands of commercially available ground coffee and eight brands of soluble/instant coffee. The elements measured were Al, As, Ba, Ca, Ce, Co, Cr, Cs, Dy, Eu, Fe, Gd, Hf, K, La, Lu, Mg, Mn, Na, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, Tm, U, V, Yb and Zn. Twenty four elements were found to be below the detection limit in one or more samples. These elements were Ce, Cr, Fe, V, As, Eu, Ba, Dy, Gd, Hf, La, Lu, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, Yb, Tm, and U.     

NAA and ICP analysis of obsidian from Central Europe and the Aegean: Source characterisation and provenance determination

INAA and ICPES are compared for their discriminative power in obsidian source characterisation. Geological samples from the Aegean and Carpathian sources were analysed for Na, Sc, Fe, Co, Rb, Sb, Cs, Ba, La, Ce, Sm, Eu, Tb, Yb, Lu, Hf, Ta, Th, U by INAA and for B, Na, Mg, Al, K, Ca, Sc, Ti, Mn, Fe, Zn, Y, Yr, Cs, Ba, La, Ce, Sm, Eu, Gd, Tb, Yb, Lu, Hf by two ICPES procedures. It is shown that all techniques work successfully, however, INAA is more efficient in the chemical discrimination of neighbouring sources.     

Samarium Polystibides Derived from Highly Activated Nanoscale Antimony

Zintl ions in molecular compounds are of fundamental interest for basic research and application. Two reactive antimony sources are presented that allow direct access to molecular polystibide compounds. These are Sb amalgam (Sb/Hg) and ultrasmall Sb⁰ nanoparticles (d=6.6±0.8 nm), which were used independently as precursors for the synthesis of the largest f‐element polystibide, [(Cp*₂Sm)₄Sb₈]. Whereas the reaction of the nanoparticles with [Cp*₂Sm] directly led to [(Cp*₂Sm)₄Sb₈], Sm/Sb/Hg intermediates were isolated when using Sb/Hg as the precursor. These Sm/Sb/Hg intermediates [{(Cp*₂Sm)₂Sb}₂(μ‐Hg)] and [{(Cp*₂Sm)₃(μ⁴,η^1:2:2:2‐Sb₄)}₂Hg] were synthetically trapped and structurally characterized, giving insight in the formation mechanism of polystibide compounds.