利用Ni(OH)x助催化剂修饰提高g-C3N4纳米片/WO3纳米棒Z型纳米体系的可见光产氢活性的研究

光催化技术是目前解决能源和环境问题最具前景的手段之一,因此寻找高效光催化剂已成为光催化技术的研究热点.而在众多半导体催化剂中,廉价、环保且性能稳定的g-C3N4光催化剂在太阳光开发利用方面尤其引人关注.然而,由于g-C3N4的比表面小,活性位点少,以及光生电子/空穴对易复合等不足,严重导致其较低的光催化量子效率.因此,构造Z型体系和负载助催化剂等策略被广泛应用于提高g-C3N4光催化效率.在过去几年中,TiO2,Bi2WO6,WO3,Bi2MoO6,Ag3PO4和ZnO已经被成功证实可以与g-C3N4耦合而构造Z型光催化剂体系.其中,WO3/g-C3N4光催化剂体系,具有可见光活性的WO3导带中的光生电子和g-C3N4价带中的光生空穴容易实现Z型复合,从而保留了WO3的强氧化能力和g-C3N4的高还原能力,最终大幅度提高了整个体系的光催化活性.在g-C3N4的各种产氢助催化剂中,由于常用的Pt,Ag和Au等贵金属的高成本和低储量等问题严重限制了它们的实际应用,所以近年来各种非贵金属助催化剂(包括纳米碳,Ni,NiS,Ni(OH)2,WS2和MoS2等)得到了广泛的关注.我们采取廉价且丰富的Ni(OH)x助催化剂修饰g-C3N4/WO3耦合形成的Z型体系,开发出廉价高效的WO3/g-C3N4/Ni(OH)x三元产氢光催化体系.在该三元体系中,Ni(OH)x和WO3分别用于促进g-C3N4导带上光生电子和价带的光生空穴的分离及利用,从而使得高能的g-C3N4的光生电子在Ni(OH)x富集并应用于光催化产氢,而高能的WO3的光生空穴被应用于氧化牺牲剂三乙醇胺,最终实现了整个体系的高效光催化产氢活性及稳定性.我们通过直接焙烧钨酸铵和硫脲制备出WO3纳米棒/g-C3N4,并采用原位光沉积方法将Ni(OH)x纳米颗粒负载到WO3/g-C3N4上.随后,我们采取X射线衍射(XRD)、高分辨透射电子显微镜(HRTEM)、X射线光电子能谱分析(XPS)和比表面和孔径分布等表征手段来研究光催化剂的结构与形貌;采取紫外-可见漫反射表征方法来研究其光学性能;采取荧光光谱,阻抗和瞬态光电流曲线等表征手段来测试光催化剂的电荷分离性能;采取极化曲线和电子自旋共振谱等表征手段来证明光催化机理;采取光催化分解水产氢的性能测试来研究光催化剂的光催化活性与稳定性.XRD,HRTEM和XPS表征结果,表明WO3为有缺陷的正交晶系的晶体,直径为20–40纳米棒且均匀嵌入在g-C3N4纳米片上;Ni(OH)x为Ni(OH)2与Ni的混合物,其Ni(OH)2与Ni的摩尔比为97.4 : 2.6,Ni(OH)x粒径为20–50 nm且均匀分散在g-C3N4纳米片上,WO3/g-C3N4/Ni(OH)x催化剂界面之间结合牢固,其中WO3和Ni(OH)x均匀分布在g-C3N4上.紫外-可见漫反射表征结果表明,随着缺陷WO3的负载量增加,复合体系的吸收边与g-C3N4相比产生明显的红移,而加入Ni(OH)x助催化剂使得催化剂体系的颜色由黄变黑,明显地增加了可见光的吸收.荧光光谱,阻抗和瞬态光电流曲线结果表明,WO3和Ni(OH)x的加入能有效地促进光生电子/空穴的分离.极化曲线结果表明,掺入WO3和Ni(OH)x能降低g-C3N4的析氢过电位,从而提高光催化剂表面的产氢动力学.?O2?和?OH 电子自旋共振谱表明成功形成了WO3/g-C3N4 耦合Z 型体系.光催化分解水产氢的性能测试表明,20%WO3/g-C3N4/4.8%Ni(OH)x产氢效率最高(576 μmol/(g?h)),分别是g-C3N4/4.8%Ni(OH)x,20%WO3/g-C3N4和纯g-C3N4的5.7,10.8和230倍.上述结果充分证明,Ni(OH)x助催化剂修饰和g-C3N4/WO3 Z型异质结产生了极好的协同效应,最终实现了三元体系的极高的光催化产氢活性.     

Preparation and electrochromic property of covalently bonded WO3/polyvinylimidazole core-shell microspheres

Covalently bonded WO3/polyvinylimidazole (C-WO3/PVI) core-shell microspheres in sizes of 250 nm were prepared. The microstructures of C-WO3/PVI core-shell microspheres were characterized by TEM, IR, and XRD. It is found that the chemical and thermal stabilities of C-WO3/PVI core-shell microspheres are higher than those of pure WO3 nanoparticles and noncovalently bonded WO3/polyvinylimidazole (NC-WO3/PVI) core-shell microspheres. This is attributed to the strengthened interaction of the WO3 nanoparticle core and the PVI shell resulting from the interaction of covalent bonds. The electrochromic device made by the C-WO3/PVI core-shell microspheres was studied. It is suggested that the C-WO3/PVI core-shell microspheres exhibit better electrochromic properties than pure WO3 nanoparticles or NC-WO3/PVI core-shell microspheres.     

还原态WO_3/Al_2O_3,NiO/Al_2O_3和NiO-WO_3/Al_2O_3催化剂上H_2,CO,O_2的吸附特性

在加氢精制和许多其它催化过程中,Mo,W是主要的活性组分,Co,Ni通常作为助剂,有关Co-Mo体系的研究文献报导很多~[1.2], 但由于钨较难还原和硫化,关于     

等离子体增强化学气相沉积法制备WO3-x/C复合材料及其储锂性能研究

三氧化钨(WO_3)凭借其在锂离子电池中较高的理论比容量(～700mAh·g~(-1))以及廉价易得的特性而引起了科研工作者广泛的研究兴趣,然而其相对较差的导电性以及在循环过程中所发生的较大体积变化导致其倍率性能和循环性能并不理想。为了增强其导电性,减缓体积变化所带来的负面影响,本文采用等离子体增强的化学气相沉积法成功地在所制备的WO_(3-x)纳米片上包覆含有氮元素掺杂的无定形碳。氮掺杂碳的包覆可以有效降低循环过程中发生的较大体积变化问题,而且可以提供更多的位点供锂离子进行嵌入/脱嵌。电化学测试表明,所制备的WO_(3-x)/C电极相比于WO_(3-x)电极和商业WO_3电极,展现出更好的倍率性能和循环性能。动力学模拟与计算表明,经过碳包覆的WO_(3-x)/C电极具有更小的电荷转移电阻和更快的锂离子扩散速率,从而有效提升其电化学性能。     

Structural stability and phase transitions in WO3 thin films

Tungsten oxide (WO3) thin films have been produced by KrF excimer laser (lambda = 248 nm) ablation of bulk ceramic WO3 targets. The crystal structure, surface morphology, chemical composition, and structural stability of the WO3 thin films have been studied in detail. Characterization of freshly grown WO3 thin films has been performed using X-ray diffraction (XRD), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy (RS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) measurements. The results indicate that the freshly grown WO3 thin films are nearly stoichiometric and well crystallized as monoclinic WO3. The surface morphology of the resulting WO3 thin film has grains of approximately 60 nm in size with a root-mean-square (rms) surface roughness of 10 nm. The phase transformations in the WO3 thin films were investigated by annealing in the TEM column at 30-500 degrees C. The phase transitions in the WO3 thin films occur in sequence as the temperature is increased: monoclinic --> orthorhombic --> hexagonal. Distortion and tilting of the WO6 octahedra occurs with the phase transitions and significantly affects the electronic properties and, hence, the electrochemical device applications of WO3.     

制备方法对WO3/ZrO2结构的影响

WO3/ZrO2 catalysts prepared from Zr(OH)4 and crystallized ZrO2 have been characterized by means of XRD, LRS (qualitative and quantitative), and the specific sufrace area has been measured. The influence of the preparation method, the contents of WO3 in the samples and the calcination tempearture on the specific surface areas of the samples, the phase of support and the structural states of active component has been studied. The results show: (1) WO3 can disperse on ZrO2 as a monolayer; (2) WO3 dispersed on Zr(OH)4 as a monolayer retards the crystalline growth of the support on calcination, makes it crystallizing into a metastable tetragonal modification, and prevents the inter- crystalline sintering between the crystallites of ZrO2. These factors would result in an increase in the specific surface area of WO3／ZrO2 prepared from Zr(OH)4. As the content of WO3 in the sample comes up to its monolayer capacity, this effect is displayed most fully. A chemical reaction can occur between WO3 and Zr(OH)4 (or the tetragonal ZrO2) at a high temperature(800℃),producing some superacid sites on the surface. By these views, the main experimental facts published in the literatures can been interpreted satisfactotily.     

WO3纳米颗粒修饰ZnO纳米管的光催化性能

二甲四氯钠(MCPA-Na)是一种广泛用于牧场和果园的除草剂,但由于其生物降解性极低,已成为地下水和浅水中的主要污染物.研究发现,半导体可以有效地辅助降解转化危险化学品.ZnO纳米管因其中空结构和较大的比表面积,而在光催化降解有机物方面备受关注.但是,ZnO只能吸收紫外光,如果将其与窄带隙半导体进行复合,可以有效降低带隙,增强其在可见光区域的光吸收,表现出更好的光催化性能.WO3是一种具有稳定物理化学性质及耐光腐蚀窄带隙半导体.采用WO3修饰ZnO纳米管,能扩展ZnO吸收光的范围以及提高ZnO纳米管的耐光腐蚀性能.本文首先通过电化学合成的方法制备了ZnO纳米管,然后按照不同的W/Zn摩尔比将(NH4)6H2W12O40·XH2O滴加在纳米管表面,并在450 ℃下退火2 h制得ZnO-WO3纳米管阵列.研究了不同WO3含量的ZnO-WO3纳米管光催化降解MCPA-Na性能,并且通过X射线光电子能谱(XPS)、傅里叶红外光谱仪(FTIR)、紫外可见光谱(UV-Vis)和光致发光光谱(PL)等手段研究了复合WO3纳米颗粒后ZnO纳米管半导体光催化性能提高的原因.XPS结果表明,W元素在ZnO-WO3纳米管阵列中以W6+的形式存在.FTIR结果表明,复合WO3后的ZnO-WO3复合半导体上比纯ZnO纳米管表面具有更多的OH-基团.由于OH-可以捕获光生空穴,并转化为具有反应活性的●OH自由基,因此复合WO3能在一定程度上提高ZnO纳米管的光催化活性.UV-Vis结果表明,WO3的复合使得光谱发生明显红移,但随着WO3含量的增加,ZnO-WO3的吸光度明显增加.另外,PL结果表明,适当的复合WO3可以抑制光生电子-空穴的复合.这是因为W6+和晶格氧的相互作用产生了较高不饱和键和表面缺陷,而表面缺陷可以作为光生载流子的陷阱,促进了光生电子和空穴的分离,因而光催化性能提高.在模拟太阳光下研究了不同WO3含量的ZnO纳米管对光催化降解MCPA-Na溶液的性能.发现W/Zn摩尔比为3%的ZnO-WO3样品表现出最好的光催化活性,200 min内其降解率为98.5%.与纯ZnO纳米管相比,其光催化循环性能也有所提高.利用Mott-Schottky测试方法并结合UV-vis结果,我们计算得到不同WO3含量的ZnO-WO3复合半导体导带价带位置.由于WO3导带位置和价带位置都比ZnO的更高,WO3上产生的光生电子会向ZnO的导带移动,而ZnO光生空穴向WO3的价带移动,从而促使光生电子和空穴的分离,提高了光催化性能.但是如果WO3复合的量太大,则在ZnO纳米管上分散性不好,反而成为光生空穴和电子复合中心,导致其光催化活性降低.     

CeO2表面分散态WO3的氨选择性催化还原性能

铈基材料在氨选择性催化还原氮氧化物(NH3-SCR)的研究中备受关注,亦被认为是潜在的新型环境友好型催化剂.CeO2具有独特的氧化还原性能和优良的储释氧性能,易与其它金属氧化物发生协同催化而有利于提高催化剂的催化反应性能,而WO3可以改善催化剂的表面酸性.研究亦报道了WO3可以改善CeO2的NH3-SCR反应的高温活性和N2选择性,其原因在于WO3增加了铈基催化剂NH3的吸附性能且抑制了NH3非选择性氧化成NOx.我们采用浸渍法制备了一系列负载型WO3/CeO2催化剂,并利用XRD,Raman,XPS,H2-TPR,NH3-TPD和in situ DRIFT对其理化性质进行了表征,系统研究了WO3负载量对WO3/CeO2催化剂NH3-SCR催化性能的影响,主要研究的内容包括:(1)WO3/CeO2催化剂中WO3的状态与催化性能之间的关系;(2)WO3负载量对WO3/CeO2催化剂的NH3和NO吸附行为的影响.NH3-SCR反应测试表明WO3负载量对WO3/CeO2催化剂有显著影响,优化的WO3/CeO2催化剂在200–450℃具有良好的脱硝性能,且在300℃通入SO2+H2O条件下依然保持优异的催化活性.XPS和H2-TPR结果表明,WO3分散在CeO2表面抑制了CeO2表面活性氧和表面晶格氧的氧化能力,这导致催化剂对NO的氧化以及对硝酸盐的吸附性能相比于纯CeO2显著降低,同时,in situ DRIFT也证实,随着WO3负载量的增加,WO3/CeO2催化剂表面吸附硝酸盐能力下降.因此,我们认为,由于低活性的晶相WO3覆盖在催化剂表面,阻碍了催化剂的表面活性位,降低了催化剂的氧化还原能力和表面酸量,从而晶相WO3抑制了WO3/CeO2催化剂的催化活性.同时,我们发现在70℃下采用氨水可以洗掉WO3/CeO2催化剂中的晶相WO3,且洗涤后的样品催化活性有所提升,这进一步验证了晶相WO3对催化活性的抑制作用.In situ DRIFT结果表明WO3/CeO2催化剂上NH3-SCR反应是通过Eley-Rideal机理进行,即吸附NH3物种与气相NO之间发生反应.随着WO3负载量的增加,WO3/CeO2催化剂中NH3的吸附能力先增强后减弱,而NO吸附能力持续减弱,这有利于表面酸位在反应过程中不被硝酸盐阻碍,当WO3负载量在分散容量附近时,这种吸附特性的效果发挥到最大,从而最大限度地促进NH3-SCR反应按照Eley-Rideal机理顺利进行.     

A novel tungsten trioxide (WO3)/ITO porous nanocomposite for enhanced photo-catalytic water splitting

Hybrid nanocomposite films of ITO-coated, self-assembled porous nanostructures of tungsten trioxide (WO(3)) were fabricated using electrochemical anodization and sputtering. The morphology and chemical nature of the porous nanostructures were studied by Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS), respectively. The photoelectrochemical (PEC) properties of WO(3) porous nanostructures were studied in various alkaline electrolytes and compared with those of titania nanotubes. A new type of alkaline electrolyte containing a mixture of NaOH and KOH was proposed for the first time to the best of our knowledge and shown to improve the photocurrent response of the photoanodes. Here, we show that both the WO(3) nanostructures and titania nanotubes (used for comparison) exhibit superior photocurrent response in the mixture of NaOH and KOH than in other alkaline electrolytes. The WO(3) porous nanostructures suffered from surface corrosion resulting in a huge reduction in the photocurrent density as a function of time in the alkaline electrolytes. However, with a protective coating of ITO (100 nm), the surface corrosion of WO(3) porous nanostructures reduced drastically. A tremendous increase in the photocurrent density of as much as 340% was observed after the ITO was applied to the WO(3) porous nanostructures. The results suggest that the hybrid ITO/WO(3) nanocomposites could be potentially coupled with titania nanotubes in a multi-junction PEC cell to expand the light absorption capability in the solar spectrum for water splitting to generate hydrogen.     

Ellipsometric study of dissolution of anodic WO3 films in aqueous solutions. 2. Reaction mechanism

The present work demonstrates that the dissolution of anodic WO3 can be described in terms of general mechanisms already used to account for the physicochemical processes involved in the dissolution of oxides of other metals. The chemical dissolution of anodic WO3 films is characterized by in situ ellipsometry, which has proven to be a suitable technique for studying the processes taking place.(1) The capability of ellipsometry for distinguishing between thickness decrease and hydration and generation of porosity/roughness helps to analyze the thickness range within which reliable kinetic information can be obtained. The dissolution rate law found for anodic WO3 does not depend on the oxide thickness. The dissolution of anodic WO3 films includes hydration and roughening, besides thickness decrease, and is kinetically controlled by the OH- concentration at the oxide/electrolyte interface. Apart from OH-, the specific nature of electrolyte anions seems to play no kinetic role, except in promoting porosity/roughness.     

Aerosol assisted chemical vapour deposition of tungsten oxide films from polyoxotungstate precursors: active photocatalysts

Aerosol assisted chemical vapour deposition of polyoxotungstate precursors [n-Bu4N]2[W6O19] and [n-Bu4N]4H3[PW11O39] produces films of WO(3 - x) and WO3 on glass substrates; the WO3 films show significant photocatalytic decomposition of a test organic pollutant--stearic acid--when irradiated with either 254 or 365 nm radiation.     

Photocatalysis and photoinduced hydrophilicity of WO3 thin films with underlying Pt nanoparticles

The photocatalytic oxidation and photoinduced hydrophilicity of thin tungsten trioxide (WO(3)) films coupled with platinum (Pt) nanoparticles were investigated. WO(3) films with underlying Pt nanoparticles (WO(3)/Pt/substrate) and those with overlying Pt nanoparticles (Pt/WO(3)/substrate) were synthesized by sputtering and sol-gel methods. Between these films, underlying Pt nanoparticles greatly enhanced the photocatalytic oxidation activity of WO(3) without decreasing the photoinduced hydrophilic conversion. However, overlying Pt nanoparticles deteriorated the hydrophilicity of WO(3) because the Pt nanoparticle surface was hydrophobic. The enhanced photocatalytic reaction by the Pt nanoparticles was attributed to the multi-electron reduction in Pt, which is caused by the injected electrons from the conduction band of WO(3). The relationship between photocatalytic activity and thin film structure, including the size of Pt nanoparticles, the thickness and porosity of the WO(3) layer, were investigated. Consequently, the optimum structure for high performance in both photocatalysis and photoinduced hydrophilicity was WO(3) (50 nm)/Pt(1.5 nm)/substrate, and this film exhibited a significant self-cleaning property even under visible light irradiation.     

Synthesis and characterisation of tungsten(VI) oxo-salicylate complexes for use in the chemical vapour deposition of self-cleaning films

Tungsten(VI) oxo-salicylate complexes were prepared in moderate yield (47 to 63%) by the reactions of WOCl4 and two equivalents of either 3-methylsalicylic acid (MesaliH2) or 3,5-di-isopropylsalicylic acid (di-i-PrsaliH2). Performing the reaction in refluxing toluene afforded the two analogous ditungsten complexes 1, [{WO(Mesali)(MesaliH)}2(mu-O)], and 2, [{WO(di-i-Prsali)(di-i-PrsaliH)}2(mu-O)], however in refluxing hexane the mononuclear tungsten complex , [WO(di-i-Prsali)(di-i-PrsaliH)Cl], was isolated. The single crystal X-ray study of revealed a pseudo-octahedral geometry around the tungsten centres. Aerosol assisted chemical vapour deposition of or afforded brown tungsten trioxide thin films. These films were converted to yellow fully oxidised WO3 on annealing in air at 550 degrees C for 30 minutes. The yellow WO3 films demonstrate preferred orientation on the substrate and show interesting functional properties-photo induced hydrophilicity and photocatalytic activity.     

WO3/TiO2 复合纤维的制备及储能光催化性能

以钛酸正丁酯为前驱体, 采用静电纺丝技术制得了纯锐钛矿TiO2纤维, 并以其为基质, 通过水热法制备了具有异质结构的WO3/TiO2复合纤维. 利用X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 能量色散光谱仪(EDS)、 透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等对样品的结构和形貌进行了表征. 以罗丹明B的脱色降解为模型反应, 考察了样品的光催化性能和储能光催化性能. 结果表明, 花状WO3微球包裹在TiO2纤维上, 得到了具有异质结构的WO3/TiO2复合纤维光催化剂. WO3与TiO2复合有利于光生载流子的输运和分离, 增强了体系的量子效率, 提高了光催化活性. WO3/TiO2 复合纤维经光照处理后, 在黑暗条件下显示出储能光催化特性.     

Li-Mn/WO_(3)/TiO_(2)固体酸催化剂的制备及其甲烷氧化偶联催化性能研究北大核心CSCD

Li-Mn/WO_(3)/TiO_(2)催化剂具有良好的低温OCM催化性能,采用浸渍法制备Li-Mn/WO_(3)/TiO_(2)催化剂,并详细考察WO_(3)对催化剂物理化学性质及催化性能的影响.利用X射线衍射(XRD)、CO_(2)程序升温脱附(CO_(2)-TPD)、O_(2)程序升温脱附(O_(2)-TPD)、H_(2)程序升温还原(H_(2)-TPR)、拉曼光谱(Raman)和X射线光电子能谱(XPS)等表征技术对催化剂进行了研究,发现WO_(3)的添加提高了C_(2)选择性,并有效抑制了深度氧化.XRD与CO_(2)-TPD结果表明,WO_(3)的添加不仅有利于金红石型TiO_(2)的形成而且能够中和催化剂表面的强碱位,从而抑制了深度氧化反应.O_(2)-TPD和H_(2)-TPR结果表明,WO_(3)的添加降低了晶格氧(O^(2-))移动性,进而提高了反应的C_(2)选择性.此外,WO_(3)的添加促使了低温氧化偶联活性物种MnTiO_(3)的形成并提高了活性物种的分散性,因此提高了催化剂甲烷氧化偶联的反应活性和选择性.所有Li-Mn/x%WO_(3)/TiO_(2)催化剂中,Li-Mn/5%WO_(3)/TiO_(2)催化剂显示出最佳的OCM反应性能.在750℃,CH_(4)∶O_(2)∶N_(2)=10∶4∶5,GHSV=2280 mL·g^(-1)·h^(-1)条件下,最高的C_(2)产物收率可达16.3%.     

甲醇在Pt/C和Pt/WO3/C电极上的电氧化

用液相还原法制备碳载Pt(Pt/C)和碳载Pt/WO3(Pt/WO3/C)催化剂.实验表明该催化剂中加入一定量的WO3后,其对甲醇的催化氧化活性和稳定性都有一定提高,并以Pt、W原子比为1∶1的催化剂性能最好.这是由于Pt催化剂中加入了WO3后,其电化学活性比表面积增大,并且降低了对CO吸附强度.     

In situ growth of epitaxial cerium tungstate (100) thin films

The deposition of ceria on a preoxidized W(110) crystal at 870 K has been studied in situ by photoelectron spectroscopy and low-energy electron diffraction. Formation of an epitaxial layer of crystalline cerium tungstate Ce(6)WO(12)(100), with the metals in the Ce(3+) and W(6+) chemical states, has been observed. The interface between the tungsten substrate and the tungstate film consists of WO suboxide. At thicknesses above 0.89 nm, cerium dioxide grows on the surface of Ce(6)WO(12), favoured by the limited diffusion of tungsten from the substrate.     

Ag/WO3纳米复合膜的制备及其电致变色性质和器件的研究

通过真空镀膜方法制备的纳米Ag薄膜均匀致密, 表面光滑. 然后通过电化学方法在Ag纳米薄膜上沉积一层三氧化钨(WO3), 制备纳米Ag/WO3复合膜. 并在此基础上构筑五层式玻璃/ITO/纳米Ag-WO3复合膜/固态电解质/聚(3-甲基噻吩)/ITO/玻璃电致变色器件. 实验结果表明, 与传统的WO3膜相比, 纳米Ag/WO3复合膜具有更好的电化学活性、更高的对比度、更短的响应时间, 以及更好的稳定性. 由该复合膜组装的电致变色器件工艺简单, 电致变色性能良好.     

Fabrication and characterization of multidimensional tungsten oxide networks

Approaches for preparation of porous oxides with different length scales are currently available[1?3]. Materials with hierarchical pore systems at two or three different length scales have also been prepared[4?7]. Such materials are important both for the…     

Pd/WO_3-RGO纳米催化剂对甲酸氧化的电催化性能

采用表面修饰技术将WO_3晶粒引入到氧化石墨烯(GO)表面,通过硼氢化钾还原法制备了载钯催化剂Pd/WO_3-RGO.对催化剂进行了结构和形貌表征,并考察了该催化剂对甲酸氧化的电催化性能.结果表明,Pd/WO_3-RGO催化剂由石墨烯、单斜态WO_3和立方面心Pd晶粒组成,Pd颗粒均匀分散在载体上;使用Pd/20%WO_3-RGO催化剂电极时的甲酸氧化最大峰电流密度大幅增加,是Pd/RGO催化剂电极甲酸氧化峰电流密度的2.5倍;Pd/WO_3-RGO催化剂稳定性大大增强,且具有更加优异的抗CO中毒能力;Pd晶粒与WO_3晶粒的相互交叠有利于它们之间的催化协同效应,增强催化剂的催化性能.