Studies of thermooxidative degradation process of chlorinated natural rubber from latex

The thermooxidative degradation of chlorinated natural rubber (CNR) from latex were studied by thermogravimetry (TG) coupled with Fourier Transform Infrared Spectroscopy (FTIR), ultraviolet-visible (UV-Vis) spectroscopy and difference FTIR. The CNR degraded in air atmosphere with two distinct steps of weight loss. The first step ranging from 160 to 390 °C, mainly is a dehydrochlorination reaction with a little oxidative scission of molecular backbones to release carbon dioxide and the conjugated polyene sequences (---[C=C]---)_n=3,4 are formed on the molecules of CNR. The second step ranging from 390 to 585 °C, is an oxidative degradation reaction of the molecular backbones of CNR and the evolved gas is only carbon dioxide.     

Preparation and degradation of head-to-head PVC

The course of the chlorination reaction of cis-1,4-polybutadiene is dependent on the choice of solvent. When methylene chloride is used, a pure addition reaction of chlorine leads to a polymer with the structure of head-to-head, tail-to-tail PVC. The thermal stability of the head-to-head PVC polymer has been studied by thermal volatilization analysis, thermogravimetry, and evolved gas analysis for hydrogen chloride, and the changes in the ultraviolet (UV) spectrum of the polymer during degradation have been investigated. The head-to-head polymer has a lower threshold temperature of degradation than normal PVC, but reaches its maximum rate of degradation at a higher temperature for powder samples of the polymer under programmed heating conditions. Blends of head-to-head PVC with poly(methyl methacrylate) have also been degraded, and the presence of the head-to-head polymers, like that of normal PVC, results in depolymerization of the PMMA as soon as the dehydrochlorination reaction commences. The mechanism of degradation of head-to-head PVC is discussed.     

Effect of ozone on poly(vinyl chloride) degradation

The influence of ozone on the kinetics and mechanisms of poly(vinyl chloride) degradation has been studied. The rate constants for reaction of ozone with saturated and unsaturated units of macromolecules have been measured. The products of the reaction of ozone with double bonds are inactive and do not influence the subsequent thermal dehydrochlorination of the polymer. The products of reaction of ozone with saturated units greatly increase dehydrochlorination.     

Thermal degradation of polymer-fire retardant mixtures—Part II: Mechanism of interaction in polypropylene-chlorinated paraffin mixtures

The thermal degradation of polypropylene is accelerated when it is heated in mixtures with a fire retardant chlorinated paraffin (Cl 70%) whose dehydrochlorination rate is simultaneously reduced.The mechanism proposed to account for this behaviour involves the attack of the chlorine atoms, which propagate the dehydrochlorination reaction, on the tertiary hydrogen atoms of polypropylene with formation of HCl. The kinetic chain length of the dehydrochlorination is decreased and the rate of evolution of HCl is lowered, while the radicals formed on the polypropylene chain lead to its scission and volatilisation.The effects of these reactions on the fire retardant performance of the mixture are discussed.     

胶乳法氯化天然橡胶的光、热氧稳定性能

胶乳法氯化天然橡胶CNR经紫外光老化、热氧老化实验、化学分析、紫外光谱分析和热分析,结果表明：产品较溶液法光稳定性稍差,加入0．4％(质量百分比)的紫外线吸收剂AUI(二苯甲酮类)、AUII(苯并三唑类)和极少量的抗氧剂,可显著提高抗热氧老化性能。最佳配方为0．2％／0．5％(质量百分比)AOI(酚类抗氧剂)与AOIH(亚磷酸酯类抗氧剂)并用,或加入0．2％(质量百分比)的AOI。     

Thermal degradation of chlorinated rubber: Evidence for an alternative cyclic structure for chlorinated rubber

The thermal degradation under vacuum or in nitrogen of commercial chlorinated rubber (ICI Alloprene, 64.5 wt.-% chlorine) was studied by isothermal thermogravimetry and by simultaneous TG/TVA with programmed heating by using a Cahn RG thermobalance built into a thermal volatilization analysis (TVA) system. Analysis of volatile products was performed by titration and by spectroscopic methods. The only major degradation product is hydrogen chloride; five-sevenths of the total available hydrogen chloride is lost with great ease, and complete dehydrochlorination is very much easier than in poly(vinylidene chloride). Conjugation develops early in the degradation, but the minor products methane, ethylene, and hydrogen are observed in the later stages of reaction. These features cannot be reconciled with the previously proposed cyclic structure for chlorinated rubber, and an alternative structure which accounts well for the degradation behavior is suggested.     

Thermal degradation of a highly chlorinated paraffin used as a fire retardant additive for polymers

The thermal degradation of a highly chlorinated paraffin, (Cl 70% w/w)(CP), used as a fire retardant additive for polymers, has been studied by TG, DTA and TVA. The main volatile degradation product is HCl which is eliminated in two steps. To 60–70% dehydrochlorination an apparent zero order reaction occurs with a detectable rate from 250°C, probably initiated at labile chlorine atoms. The apparent activation energy of the process is 40 kcal/mole. A charred residue containing 35% chlorine is obtained. This residue undergoes nearly complete dehydrochlorination in the range 300–600°C.     

Degradation of vinylidene chloride/methyl acrylate/phenylacetylene (VDC/MA/PA) terpolymers. Effect of internal unsaturation on the stability of Saran copolymers

The thermal degradation of vinylidene chloride/methyl acrylate/phenylacetylene (VDC/MA/PA) terpolymers containing a constant 9 wt % methyl acrylate and small but varying amounts of phenylacetylene has been examined in the solid phase and in bibenzyl solution. Thermally promoted degradative dehydrochlorination, largely uncomplicated by methyl chloride formation, readily occurs at temperatures approaching 200°C. Incorporation of phenylacetylene into the polymer structure greatly facilitates degradative dehydrochlorination. Indeed, the presence of phenylacetylene induces the formation of polyene segments during the polymerization so that all the terpolymers, even at very low phenylacetylene loading, are tan in color. The decreased stability of polymers containing internal unsaturation arises from an increased rate of initiation for the degradation reaction. The propagation rate is largely unaffected by the level of unsaturation initially present in the polymer. Thus random double bonds have been identified as the principal defect sites responsible for the facile degradation of Saran copolymers. Species which promote the degradation of Saran polymers probably do so by facilitating the introduction of double bonds into the structure. The ratio of hydrogen chloride to stilbene formed for degradation of the terpolymers in bibenzyl solution is ca. 35:1. This is strongly reminiscent of PVDC degradation and suggests that for degradation of either the homopolymer or Saran copolymers the chain-carrying allylic radical pair does not dissociate to any appreciable extent as dehydrochlorination occurs.     

Polymeric p-benzoquinone–tin derivatives as thermal stabilizers for rigid poly(vinyl chloride). II. Evaluation of the stabilizing efficiency

The polymeric p-benzoquinone-tin derivatives obtained from the reaction of p-benzoquinone with tin tetrachloride in the absence of solvent have been investigated as thermal stabilizers for rigid PVC at 200°C by measuring the rate of dehydrochlorination. The results reveal the greater stabilizing efficiency of the investigated products in relation to dibutyltin maleate and the basic lead stabilizers commonly used in industry. Evidence has been accumulated that the quinone and metallic elements (Sn? Sn bonds) of the stabilizer participate in the stabilization process by trapping the radical intermediates of degradation and blocking the odd electron sites formed on the polymer chains. Although stabilizers with high quinone content provide greater stabilization in the early stages of degradation, their efficiency sharply decreases in subsequent stages. On the other hand, stabilizers of high tin content effectively prohibit the dehydrochlorination reaction at all stages of degradation. On an equivalent basis of metal content, the results clearly demonstrate the greater stabilizing efficiency of tin atoms when found in direct contact in the stabilizer molecule. The mechanism of stabilization suggested to account for the results obtained may be considered as additional evidence in support of the radical nature of the dehydrochlorination reaction.     

Thermal dehydrochlorination of poly(vinylidene chloride)

The kinetics of the early stages of thermal degradation below 1% dehydrochlorination of emulsion-polymerized poly(vinylidene chloride) (PVDC) is studied by the variation of the pH value of potassium hydroxide aqueous solution between 160 and 190°C in the presence of air and other gas streams. The results turned out that the thermal degradation of PVDC can be divided into three stages, which correspond to an induction period, a period with conversion below 0.1% dehydrochlorination, and that with conversion ranging from 0.1 to 1%. For the induction stage, the induction time depends upon the types of environment gas and degradation temperature. Both of the second and the third stages are zero-order reactions, which also result in the discoloration and crosslinking of the neat polymer. The average apparent activational energy of the zero-order degradation reaction was about 21 kcal/mol, which is independent of the types of environment gas. The whole degrading kinetics data can be well explained by the mechanism of a free-radical-induced dehydrochlorination. The viscosity of the degraded sample increases rapidly with degradation and becomes insoluble in regular solvents. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2035–2044, 1999