Simultaneous microdetermination of carbon, hydrogen, chlorine, bromine, sulfur, and metals in organometallic compounds

A method for the simultaneous microdetermination of carbon, hydrogen, chlorine, bromine, sulfur, and metals which combines features of the known intermediate storage technique in organic microanalysis and formation of the metal-oxine complex, is described. Carbon and hydrogen are determined gravimetrically as usual. Sulfur and halogens are absorbed and stored on electrolytic silver. After completion of the combustion, the oxygen is replaced first by nitrogen and secondly by hydrogen which liberates the sulfur as sulfur dioxide and halogens as hydrogen halides and regenerates the silver layer. The liberated gases can be easily absorbed by dilute hydrogen peroxide and determined titrimetrically. The metal oxide, remaining in the platinum boat, is dissolved in a mixture of nitric-perchloric acids in a test tube and the metal content is determined gravimetrically and titrimetrically using 8-hydroxyquinoline.     

Determination of the types of nitrogen in steels containing aluminium or titanium by an extraction method with hydrogen

The extraction method with hydrogen, hitherto used to determine mobile nitrogen in steels over the temperature range 350–450°C, has been employed at higher temperatures to determine nitrogen bound as aluminium nitride, or as titanium nitride or carbonitride. In steels containing only silicon and titanium as deoxidizers, the nitrogen remaining after passage of hydrogen at 600 or 750°C is present as titanium nitride or carbonitride and can be determined by difference. In steels containing only silicon and aluminium as deoxidizers, the nitrogen remaining after passage of hydrogen at 600°C is present as aluminium nitride and can also be determined by difference. This was verified by determining the aluminium nitride indirectly. The nitrogen released from both the aluminium and titanium steels in hydrogen at 600°C probably results from dissociation of submicroscopic particles of manganese silicon nitride.     

In search for structure of active site in iron-based oxygen reduction electrocatalysts

Calculations to elucidate the structure of Fe-based electrocatalysts were performed. Lowest energy configurations for incorporation of nitrogen in bulk of graphene sheet as well as on edge were determined. Substitution of nitrogen in bulk graphene is endothermic, while on the edge it can be either exothermic, if hydrogen is present, or endothermic. Energies of various configurations for the incorporation of iron on the edge of the nitrided graphene sheet were also examined. In the absence of hydrogen, iron prefers to bond with nitrogen and a carbon atom. In the presence of hydrogen, however, iron was found to prefer bonding to two nitrogen atoms on the graphene edge.     

The use of body hydrogen as an internal standard in the measurement of nitrogen in vivo by prompt neutron capture gamma-ray analysis

The previously established technique of analysis of neutron capture γ-rays for the determination of nitrogen in-vivo has been modified to make estimates of absolute quantities of nitrogen mass. Hydrogen is used as an internal standard and the nitrogen mass is determined from the observed ratio of nitrogen to hydrogen counts, together with the hydrogen mass, estimated from body parameters. Phantom and cadaver studies indicate that nitrogen mass can be estimated to ±4% or better by this means.     

Potentiometric semimicrodetermination of some triazoles,diazoles, and triazenes

Summary Heterocyclic nitrogen compounds possessing a free hydrogen atom on the secondary amino nitrogen and at least two heterocyclic nitrogen atoms can be determined by potentiometric titration with silver nitrate in the presence of borate buffer. Triazenes react similarly. Water-soluble compounds can be determined in aqueous solution; others are determined in methanol. Emf's were monitored with a sulfide ion-selective indicator electrode and a double-junction reference electrode. If the hydrogen atom on the secondary amino nitrogen is replaced by another moiety then the acidic character of the molecule is lost and it cannot be analyzed by this method. The method works when substituents such as nitro, halogen, or alkyl groups are present. The presence of amino groups results in a different stoichiometry, each nitrogen-containing molecule requiring 1.5 mol of silver ions.

---

Zusammenfassung Heterocyklische Stickstoffverbindungen mit einem freien Wasserstoffatom am sekundären Aminostickstoff und wenigstens zwei heterocyklischen Stickstoffatomen können mit Silbernitrat in Gegenwart von Boratpuffer potentiometrisch titriert werden. Triazene reagieren ähnlich. Wasserlösliche Verbindungen lassen sich in wäßriger Lösung titrieren; sonst erfolgt die Bestimmung in Methanol. Die EMK wird mit einer sulfidionen-spezifischen Indikatorelektrode und einer doppelt verbundenen Bezugselektrode gemessen. Wird das am sekundären Amino-N-Atom gebundene Wasserstoffatom durch einen Rest ersetzt, so geht der saure Charakter verloren und die Verbindung kann auf dem angegebenen Weg nicht analysiert werden. Die Methode funktioniert auch in Gegenwart von Nitro-, Halogen- und Alkylgruppen. Die Anwesenheit von Aminogruppen verändert das stöchiometrische Verhältnis, jedes N-hältige Molekül verbraucht dann 1,5 Mole Silberionen.

     

氢气在热导检测器上的相对校正因子

用三种不同来源的标准气，当实验测定了氮气作载气时，以甲烷作标准物，氢气在热导检测器上的相对摩尔校正因子值为０．２１０ 和相对质量校正因子值为０．０２６４。测定误差小于５％ 。该测定值可供天然气和化工行业气体分析工作者参考。     

Crystal structure of (1,10-phenanthroline-N,N')(1,4,7,10-tetraazacyclododecane-N,N',N",N"')nickel(II) diperchlorate.

The crystal structure of the title compound, [Ni(C8H20N4)(C12H8N2)](ClO4)2, has been determined by X-ray diffraction. The Ni(II) ion is six coordinated with four nitrogen atoms of the tetradentate macrocyclic ligand and two nitrogen atoms of the bidentate ligand in a distorted octahedron geometry. The folded tetradentate macrocyclic ligand adopts a configuration having four five-membered chelate rings in distorted eclipsed conformations. The four hydrogen atoms of the amine groups of the macrocyclic ligand are on the same side towards the bidentate ligand.     

Detection of C,H, N,and O in capillary gas chromatography by atomic emission

Using a new atomic emission detector for gas chromatography, the quantitative and qualitative aspects of selective elemental detection of carbon, hydrogen, nitrogen, and oxygen were investigated. Sensitivity, precision, degree of tailing, and response variation between compounds are reported for capillary applications. Earlier atomic emission detectors reported poor sensitivity and selectivity for the analysis of oxygen. These problems have been greatly reduced due to lower interactions between elements in the sample and the silica wall of the water-cooled discharge tube. Using near-optimal sample amounts and chromatographic conditions, area precision was found to be very good with little variation in response factors among different compounds. For the compounds tested, response factors varied over a span of 2% to 3% for carbon, hydrogen, and nitrogen, and over 7% for oxygen. For quantitative analysis, area ratios were calibrated directly from the area ratios of two elements of an internal standard, and yielded better precision and compound independence than the individual calibrated response of each element. Empirical formulas were calcualted using one peak as a qualitative internal standard. Unambiguous formulas were determined for some, but not all, of the compounds tested. Further increases in precision and/or compound independence is needed before empirical formula determination can be used as a routine tool.     

热塑性甲壳素衍生物N,O-苄基壳聚糖的合成及表征

天然高分子的热塑化一直引起人们的极大关注．由于存在大量的分子内和分子间氢键,一般天然高分子都不能加热塑化,从而限制了其应用．纤维素和淀粉的热塑化改性已有了许多研究．典型的热塑性纤维素衍生物有乙基纤维素、醋酸纤维素和经丙基纤维素等[1,2],有些纤维素衍生物还具有热致液晶性．淀粉的某些衍生物也已有热塑性[3]．在分子结构上,甲壳素／壳聚糖比纤维素或淀粉多了乙酰氨基和氨基,更易形成氢键,分子间作用力更强．迄今,国内外已报道了大量甲壳素／壳聚糖衍生物,但均无热塑性．我们曾合成具有热塑性的氰乙基经丙基壳聚糖,但熔点与分解温度之间只有27℃E4J．热塑性甲壳素的研究不仅为甲壳素的加工利用开辟了新途径,而且也将为热致性甲壳素液晶的研究奠定基础,从而进一步丰富和深化目前以纤维素衍生物为主的热致胆舀液晶研究[5,6]．为此,本文研究了一种新的热塑性甲壳素衍生物,并从结构上讨论了其具有热塑性的原因．     

Theoretical study on interaction of hydrogen with single-walled boron nitride nanotubes. II. Collision, storage, and adsorption

Collision and adsorption of hydrogen with high incident kinetic energies on a single-walled boron nitride (BN) nanotube have been investigated. Molecular-dynamics (MD) simulations indicate that at incident energies below 14 eV hydrogen bounces off the BN nanotube wall. On the other hand, at incident energies between 14 and 22 eV each hydrogen molecule is dissociated at the exterior wall to form two hydrogen atoms, but only one of them goes through the wall. However, at the incident energies between 23 and 26 eV all of the hydrogen atoms dissociated at the exterior wall are found to be capable of going inside the nanotube and then to recombine to form hydrogen molecules inside the nanotube. Consequently, it is determined that hydrogen should have the incident energy >22 eV to go inside the nanotube. On the other hand, we find that the collisions using the incident energies >26 eV could result in damaging the nanotube structures. In addition our MD simulations find that hydrogen atoms dissociated at the wall cannot bind to either boron or nitrogen atoms in the interior wall of the nanotube.     

Rapid analysis of fertilizers by the direct-reading thermometric method

The authors have developed rapid methods for the determination of the main components of fertilizers, namely phosphate, potassium and nitrogen fixed in various forms. In the absence of magnesium ions phosphate is precipitated with magnesia mixture; in the presence of magnesium ions ammonium phosphomolybdate is precipitated and the excess of molybdate is reacted with hydrogen peroxide. Potassium is determined by precipitation with silico-fluoride. For nitrogen fixed as ammonium salts the ammonium ions are condensed in a basic solution with formalin to hexamethylenetetramine; for nitrogen fixed as carbamide the latter is decomposed with sodium nitrite; for nitrogen fixed as nitrate the latter is reduced with titanium(III). In each case the temperature change of the test solution is measured. Practically all essential components of fertilizers may be determined by direct-reading thermometry; with this method and special apparatus the time of analysis is reduced to at most about 15 min for any determination.     

Simultaneous microanalytical determination of carbon,hydrogen and sulphur

Summary A microanalytical procedure for simultaneous determination of carbon, hydrogen and sulphur by combustion in a nitrogen atmosphere is described. The substance is oxidized by the thermal degradation products of silver permanganate (Körbl catalyst) which serve as a source of oxygen and as an absorbent for sulphur oxides. The carbon and hydrogen are determined by the classical methods and sulphur is converted into benzidine sulphate. The procedure is accurate, simple and quick.

---

Zusammenfassung Ein mikroanalytisches Verfahren zur gleichzeitigen Bestimmung von C, H und S durch Verbrennung in Stickstoffatmosphäre wurde beschrieben. Die Substanz wird mit dem thermischen Zersetzungsprodukt von Silber-permanganat (Körbl-Katalysator) oxydiert, der als Sauerstoffdonator und als Absorbens für Schwefeloxide dient. C und H werden nach der klassischen Arbeitsweise bestimmt und S in Benzidinsulfat umgesetzt. Das Verfahren ist genau, einfach und rasch.

     

Atmospheric concentrations of sulfur dioxide, nitrogen oxides, ammonia, hydrogen chloride, nitric acid, formic and acetic acids in the south of Vietnam measured by the passive sampling method.

A passive sampling method was applied to measure the concentrations of air pollutants, such as sulfur dioxide, nitrogen oxides, ammonia, hydrogen chloride, and nitric, formic and acetic acids, in the ambient air at four test sites in the southern region of Vietnam. The monthly averages and the average concentrations of air pollutants during the period from July 2001 to September 2002 are reported here. The concentrations of air pollutants varied widely, depending on the test sites and the sampling periods. The average concentrations of sulfur dioxide in the air during the period from July 2001 to September 2002 at the four test sites were 3.3-16.9 ppb, and those of nitrogen dioxide were 5.4-12.8 ppb. The concentrations of nitrogen monoxide and hydrogen chloride were very low at all of the test sites. The observed concentrations of all of the above-mentioned pollutants were lower than those of the Vietnamese standards of air pollutants.     

Electron transfer dissociation of amide nitrogen methylated polypeptide cations

Unmodified and amide nitrogen methylated peptide cations were reacted with azobenzene radical anions to study the utility of electron transfer dissociation (ETD) in analyzing N-methylated peptides. We show that methylation of the amide nitrogen has no deleterious effects on the ETD process. As a result, location of alkylation on amide nitrogens should be straightforward. Such a modification might be expected to affect the ETD process if hydrogen bonding involving the amide hydrogen is important for the ETD mechanism. The partitioning of the ion/ion reaction products into all of the various reaction channels was determined and compared for modified and unmodified peptide cations. While subtle differences in the relative abundances of the various ETD channels were observed, there is no strong evidence that hydrogen bonding involving the amide nitrogen plays an important role in the ETD process.     

Syntheses,Structures and Characterization of Cobalt(II) and Cobalt(III) Complexes with N-Benzylated Polyamines and a Terminal Azido Ligand

Mononuclear cobalt(II) and cobalt(III) complexes, [Co(trenb)(N₃)]Cl (1) and [Co(dienb)(N₃)₂(OAc)] (2) (trenb = tris[2-(benzylamino)ethyl]amine, dienb = 1,9-diphenyl-2,5,8-triazanonane) were synthesized and characterized by elemental analyses, IR and electronic spectra. Their crystal structures were also determined by X-ray diffraction analyses. In Complex 1, cobalt(II) is five-coordinate trigonal bipyramidal with one azido nitrogen atom and four nitrogen donors of the tripodal ligand; the chloride interacts weakly with one of the secondary amino groups of trenb via a hydrogen bond. In Complex 2, cobalt(III) is in a distorted octahedral coordination environment, consisting of three nitrogen atoms of the amine ligand, two azide nitrogen atoms and an oxygen atom of the acetate ion; a six-membered ring involving the hydrogen bond may stabilize the complex, which maintains its solid geometry in DMF as indicated by the electronic spectrum.     

The fluorimetric determination of phosphate with thiamine

A method for the microdetermination of sulphur in organic compounds by means of combustion in a flow of oxygen is described. The oxides of sulphur are absorbed and stored on a small silver layer. After completion of the combustion, the oxygen is replaced first by nitrogen and secondly by hydrogen which liberates the sulphur as sulphur dioxide and regenerates the silver layer. The sulphur dioxide can be easily absorbed by dilute hydrogen peroxide and determined by any convenient method.     

Low-field approach to double resonance in nuclear quadrupole resonance of spin-1 nuclei

Using double-resonance conditions, in which the Larmor frequency of a spin-1/2 nucleus is matched to one of the nuclear quadrupole resonance frequencies of a spin-1 nucleus, the authors demonstrate increased cross relaxation between the two nuclear spin species. They calculate the cross-relaxation rate using the motionally averaged heterogeneous dipole Hamiltonian as a perturbation to the combined quadrupole and Zeeman Hamiltonians. Using this cross-relaxation rate, in addition to hydrogen and nitrogen autorelaxation rates, expressions governing spin-1/2 and spin-1 spin-lattice relaxation are determined. With ammonium nitrate, containing nitrogen (spin-1) and hydrogen (spin-1/2), increased nitrogen signal and spin-lattice relaxation are demonstrated, using fields less than 120 G. The cross-relaxation rate is also measured and an overall signal/noise improvement by a factor of 2.3+/-0.1 is attained.     

An automated method for the determination of low-level kjeldahl nitrogen in water and waste water

An entirely automated system for low level Kjeldahl nitrogen determination in water samples is described. Samples are continuously digested at 300 °C with sulfuric acid and hydrogen peroxide to convert the organic nitrogen to ammonia, which is determined colorimetrically with sodium salicylate and sodium dichloroisocyanurate (as chlorine source). The method has a range of 10–500 μg Nl^-1 with good precision and accuracy.     

Concentration limits for flame propagation in mixtures of hydrogen and oxides of nitrogen

Summary The concentration limits were determined for flame propagation in mixtures of hydrogen with nitrogen oxides (N₂O, NO₂, NO) and an inert diluent (nitrogen), the components being taken in various proportions.     

Entropy-driven hydrogen bonding: stereodynamics of a protonated, N,N-chiral "proton sponge"

The C2-symmetric ("[DL]") and achiral ("[meso]") diastereoisomers of the hydrogen iodide salt of 1,8-bis-(N-benzyl-N-methylamino)naphthalene ([2H]-[I] ) interconvert in solution. Direct interconversion of the diastereoisomers of [2H]+ must involve hydrogen bond fission (to give "[nonHB-2H+]") and rotation-inversion of the non-protonated nitrogen centre. The global activation parameters (deltaH++ and deltaS++) for diastereoisomer interconversion in [D7]DMF have been determined from rate data obtained by temperature-drop and magnetisation-transfer 13C NMR spectroscopy over a temperature range of 170 degrees C. The process is found to have a high entropy of activation in both directions (deltaS++=163(+/-4) and 169(+/-4) JK(-1)mol(-1)) and this is suggested to arise through hydrogen bonding of the ammonium centre in [nonHB-2H+] with the solvent ([D7]DMF). Comparison of the enthalpy of activation (deltaH++) with that earlier found for diastereoisomer interconversion of the free-base form 2 suggests that the intramolecular hydrogen bond in [2H]+ is roughly equal in enthalpic strength (deltaH) with that made with the solvent ([D7]DMF) in the non-hydrogen-bonded intermediate [nonHB-2H+]. As such, the hydrogen bonding in [2H]+ may be considered as predominantly an entropically driven process, without any unusual enthalpic strength.