溶剂热合成片状介孔CeO2及光致发光性能

本文以乙二醇为溶剂,Ce(NO3)3·6H2O为铈源,尿素为沉淀剂,采用了溶剂热法一步合成了二维片状结构的介孔CeO2,同时讨论了不同反应时间对晶型的影响。通过SEM、TEM、XRD、EDS和N2吸附-脱附等检测手段进行了表征,结果表明所合成CeO2是由大量较规整的片状结构单元组成,在片状结构上分布着均匀有序的介孔,产物具有立方萤石型结构,并考察了相应的光致发光性能。     

垂直取向介孔薄膜的制备

垂直取向介孔薄膜是指薄膜内部孔道垂直于基底定向排列的一类介孔薄膜,其在催化、吸附与分离、化学传感器、太阳能电池等领域具有广阔的应用前景。本文就近几年内垂直取向介孔薄膜的制备方法以及在若干领域的应用进行了回顾和综述。在此基础上,对这种特殊的薄膜材料未来的发展进行了展望。     

疏水性有序介孔氧化硅薄膜的制备

采用溶胶−凝胶技术并结合蒸发诱导自组装工艺, 以三嵌段共聚物EO₂₀PO₇₀EO₂₀ (P123)为模板剂, 使用浸渍提拉法制备了有序介孔氧化硅薄膜, 并使用不同的表面修饰剂对薄膜进行表面处理, 制备了疏水性有序介孔氧化硅薄膜. 利用FT-IR、小角XRD、HRTEM分别表征薄膜的化学物种和孔结构, 探讨了热处理温度和老化时间对薄膜介孔结构的影响, 通过接触角测试研究薄膜的疏水性能, 考察了修饰剂种类、修饰浓度和修饰时间对薄膜疏水性的影响, 结果表明所制备的薄膜为高度有序的介孔氧化硅薄膜, 孔径大小约为8 nm|表面修饰对薄膜的有序性有一定影响, 经三甲基氯硅烷(TMCS)和g-氨丙基三乙氧基硅烷(KH-550)修饰后的薄膜具有很好的疏水性能, 接触角分别为112°和96°|修饰后薄膜的水汽稳定性良好, 仍能保持有序介孔结构, 孔径达7.5 nm, 接触角达93°.     

有序宏孔-介孔TiO_2薄膜的制备及其在染料敏化太阳能电池中的应用

我们使用表面活性剂P123和聚苯乙烯球双模板技术,合成了多级有序的宏孔/介孔TiO2薄膜,并将其与P25多孔薄膜复合形成双层结构的染料敏化太阳能电池光阳极.实验结果表明,宏孔/介孔TiO2薄膜层的引入,有效地提高了光阳极对太阳光的散射以及捕获能力,从而提高了染料敏化太阳能电池的光电转化效率.与使用单一P25光阳极的染料敏化太阳能电池相比,双层TiO2结构的染料敏化太阳能电池所产生的短路光电流密度从7.49上升到了10.65mA/cm2,开路电压也从0.65提高到了0.70V.在太阳光强度为AM1.5时所测得的光电转化效率表明,双层TiO2结构的染料敏化太阳能电池的光电转化效率为5.55%,比单层P25结构的染料敏化太阳能电池的光电转化效率提升了83%.     

孔径可调的介孔SiO2自支持薄膜的溶剂挥发诱导自组装合成与表征

以十六烷基三甲基溴化铵(CTAB)为模板剂, 正硅酸乙酯为硅源, 在弱酸性条件下利用溶剂挥发诱导自组装(EISA)合成出具有介孔结构的二氧化硅薄膜. 通过控制EISA过程中溶剂挥发的环境, 可在1.4~3.1 nm的范围内调节介孔结构的孔径. 实验表明, 较快的溶剂挥发速率有助于较大孔径的介孔结构生成. 用该方法合成的介孔薄膜具有蠕虫状孔道结构和良好的孔径均一性. 在外观上, 该薄膜具有均匀、透明和无缺陷等特点, 可以自支撑, 并且具有一定的韧性.     

一步溶剂热法合成C掺杂介孔TiO_2可见光光催化材料

在无模板剂的条件下,以钛酸四丁酯为钛源,采用一步溶剂热法,在乙醇体系中合成出C掺杂TiO2球状介孔可见光光催化材料.通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、氮气吸附-脱附仪、X射线光电子能谱(XPS)、固体漫反射(UV-Vis)以及光降解罗丹明B实验等对其进行了结构表征和性能测试.实验结果表明,合成样品为锐钛矿晶型,材料表现为由纳米粒子堆积而成的大小均一的球形形貌.TiO2材料的结晶度和粒子形貌大小可以通过乙酸加入量来进行调控,这对于实际应用具有重要意义.同时,通过测试证明样品中的C原子进入TiO2晶格内部,取代了O原子的位置,窄化了TiO2内部的能带结构,从而大大提高了材料的可见光光催化活性,结果证明合成材料对污染物具有很好的吸附性能和光降解性能.     

溶剂热合成具有海绵状结构的介孔SnO2

采用溶剂热方法, 以SnCl4·5H2O/尿素/乙醇三元体系合成了具有特定结构的前驱体, 该前驱体经焙烧后得到了具有海绵状结构的介孔SnO2. 利用X射线粉末衍射(XRD)、傅立叶红外吸收光谱(FT-IR)、透射电镜(TEM)、热分析(TG-DTA)和氮气等温吸附鄄脱附等方法对产物的结构、形貌和热稳定性进行表征. 结果表明, 300 ℃焙烧处理后的样品由粒径约为5 nm的纳米粒子堆积而形成海绵状结构, 其中孔的尺寸范围在2-8 nm, 样品比表面积达到了134 m2·g-1.     

有序介孔氧化硅薄膜制备及其组装化学

本文综述了近年来利用有机模板法合成有序介孔二氧化硅薄膜的研究进展，重点阐述了两相界面外延生长和蒸发诱导自组装两种制备方法及其合成机理。此外，讨论了有序介孔二氧化硅薄膜的组装化学，包括金属元素掺杂，纳米粒子在介孔薄膜中的组装，以及有机物/二氧化硅纳米复合薄膜的制备，并对介孔二氧化硅薄膜未来的发展趋势做了展望。     

硫和银共掺杂介孔TiO2的制备表征及光催化活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO2光催化材料。利用扫描电子显微镜（SEM）、X射线衍射（XRD）、BET和紫外-可见光谱（UV-Vis）等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征。以甲基橙溶液的光催化降解为模型反应, 考察了不同掺杂量的样品在紫外和可见光下的光催化性能。结果表明：用模板法制备的共掺杂介孔TiO2光催化材料在紫外和可见光条件下较纯介孔TiO2和单掺杂介孔TiO2对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能。当硫掺杂量为2%（mol）和银掺杂量为1%（mol）,在500℃焙烧2 h所得光催化材料的催化性能最佳, 4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上。因此, 以该模板合成法, 通过硫和银的共掺杂有望使TiO2成为一种低或无能耗、高活性的绿色环保型催化材料。     

Eu/MCM-41介孔复合体系的制备与表征

以十六烷基三甲基溴化铵(CTAB)为模板剂，正硅酸乙酯(TEOS)为无机硅源，以及1，3，5-三甲苯(TMB)为加长剂合成了有序介孔分子(MCM-41)。选择Eu(DBM)3phen为客体，纳米级介孔分子筛为主体，在氯仿中进行分子组装，制备了具有强发光性能的超分子纳米复合材料Eu(DBM)3phen-MCM-41。采用XRD，HRTEM，FTIR和荧光光谱分析等对产物的结构与性能进行了分析。结果表明，在361nm紫外光激发下，Eu配合物在613nm处有较强的荧光，归属于^5Do→^7F2跃迁峰，且在400～550nm波段有介孔基体的荧光发光。     

负载激光染料香豆素151的MCM-41粉体及其纤维的光学性质研究

通过结晶包覆的方法将激光染料香豆素151成功地负载到具有介孔结构的MCM-41粉体和纤维中,制备了具有光致发光特性的MCM-41粉体和纤维材料,并通过SEM,SAXRD,UV-Vis和PL进行了表征.     

溶剂散逸自组装制备导电各向异性的金属有序阵列

通过溶剂散逸自组装法制备了聚苯乙烯(PS)有序多孔膜. 利用水珠在冷的PS溶液表面凝结形成有序阵列, 使PS以水珠阵列为模板形成有序多孔膜. 将有序多孔膜的上层剥离并附着在可收缩性高分子表面, 并进行离子溅射, 除掉有序多孔膜后在可收缩膜上留下了有序的金属圆盘阵列. 经过收缩, 有序阵列不仅光学性质发生了改变, 而且实现了导电的各向异性.     

Optical Sensing by Silica/Titania Thin Films Doped with Oxacarbocyanine Dye

Photocurrent responses of sol-gel films of silica/titania doped with oxacarbocyanine dye were investigated with a sandwich-type photocell constructed with polymer electrolyte membrane and indium-tin-oxide glass electrodes. At an equilibrium and positive bias voltages, a typical photocell exhibited negative and positive current peaks when the visible light illumination was on and off, respectively. The wavelength dependence of the photocurrent responses well matched to the absorption band of the doped dye. This differential photocurrent response was attributed to trapping of carriers photoexcited in the dye molecules at the defect states in the matrix film. At negative bias voltages, on the other hand, the cell exhibited constant, negative photoelectrochemical currents under illumination. These differential and linear photocurrent responses were affected by the SiO₂/TiO₂ matrix structures depending on the Si : Ti ratio.     

Structure of Hybrid Silica Gels Incorporated with Hydrophobic Dye Molecules

Hybrid gels incorporated with functional organic molecules are interesting for their physical properties and microstructures as well as their potential applications. Organic-inorganic hybrid silica gels incorporated with hydrophobic organic dye were prepared by hydrolysis of phenyltriethoxysilane (PhTES) and tetraethoxysilane (TEOS) in ethanol solution containing organic dye, pyrene or rhodamine-B (RB). The structure of the gels were investigated by mean of IR absorption spectra and UV-visible absorption/fluorescence spectra. The xerogel prepared from the solution of [PhTES]/[PhTES + TEOS] < 0.3 was stable, and the incorporated dyes hardly dissolved into ethanol. Si-Ph bond increased with increasing PhTES content in the precursor solutions. The UV-visible absorption spectra of the gels incorporated with RB show increase in the amount of dimer with increasing Ph-content. The fluorescence spectra for the gels incorporated with pyrene show that the hydrophobic dye is preferentially incorporated as monomers when the amount of Ph-group in the gels increases in contrast with hydrophilic RB. It is also suggested that the hydrophobic dye is preferentially incorporated into gels as monomers when the gelation rate is low.     

蒸发自组装法制备聚苯乙烯胶体晶体

采用乳液聚合法制得亚微米级聚苯乙烯单分散微球,并用蒸发自组装法在乳液气-液界面进行自上而下的层层组装,制得了厚度在450μm以上的三维有序胶体晶体。结果表明,影响胶体晶体有序性的关键因素是对蒸发速度的控制,促使胶体晶体规则排列的最主要作用力为溶液的毛细管力。在胶体晶体组装末期,随着溶剂量的减少,空间阻力逐渐增大,微球对流能力下降,造成胶体晶体的有序性降低。     

溶剂散逸自组装法制备具有电致收缩性能的聚苯胺/聚氨酯凹透镜阵列

以水珠为模板,采用溶剂散逸自组装法制备了表面具有特殊形貌的有序多孔膜. 以此多孔膜为模板制备了聚苯胺/聚氨酯（PANI/PU）的凹透镜阵列. 采用红外光谱（FTIR）和扫描电子显微镜（SEM）对界面聚合得到的PANI/PU纳米复合物的结构和凹透镜阵列的形貌进行了表征,研究了不同合成条件对纳米复合物导电性能的影响,并对PANI/PU凹透镜阵列的电学和光学性能进行了研究. 结果表明,PANI/PU凹透镜阵列同时具有导电性、电致收缩性和光衍射性质;其收缩率与外加电压成反比,而透光率与收缩率成正比.     

Structural and Photoluminescence Behaviors of Nano-Structure Thin Film and Bulk Silica Gel Derived Glasses

Nano-structure bulk and thin film silica gel derived glasses were prepared by sol-gel technique. Both samples were derived from the same precursor and subjected to the same heat-treatment regime. Structural information about prepared samples are obtained by analyzing the XRD patterns and TEM micrographs. The bulk samples phase changes from amorphous to -crystoballite at higher temperature (1300°C) than that in the thin film (500°C). The crystallite size depends to a large extent on the heat-treatment temperature. Bulk sample heat treated at 1400°C was as small as 10.4 nm. Thin film samples show higher response to heat-treatment temperature than the bulk samples, where the film is denser, has smaller pores and seems more homogeneous at lower temperature than bulk sample as revealed by SEM. The observed Raman spectra for bulk and thin film samples are in accordance with that of the -crystoballite. The Raman peak intensity is higher for thin film than bulk samples. The photoluminescence PL measurements for bulk samples show a broad intense peak at 532 nm combined with three weak peaks at longer wavelength 587, 635 and 666 nm. The PL peak intensity shows a reasonable decrease with increasing the heat-treatment temperature while the peak position shifted slightly to a lower wavelength. While the thin film samples show a unique peak at wavelength = 523 nm. The appearance of PL bands are interpreted on the light of non-bridged oxygen hole center as well as the structure defects.     

三甲基氯硅烷对纳米多孔二氧化硅薄膜的修饰

以正硅酸乙酯为先驱体,采用溶胶-凝胶法,结合旋转涂胶、超临界干燥工艺在硅片上制备了纳米多孔SiO2薄膜.用三甲基氯硅烷(TMCS)对该SiO2薄膜进行了表面修饰,采用FTIR、TG-DTA、AFM和椭偏仪等方法研究了TMCS修饰前后薄膜的结构、形貌、厚度与介电常数等性能.超临界干燥后的SiO2薄膜含有Si－O－Si与Si－OR结构,呈疏水性.在空气中250 ℃以上热处理后SiO2薄膜因含有Si－OH而呈吸水性. TMCS修饰后的SiO2薄膜在温度不高于450 ℃时可保持其疏水性和多孔结构. SiO2薄膜经TMCS修饰后基本粒子和孔隙尺寸增大,孔隙率提高,介电常数可降低至2.5以下.     

Synthesis and Nonlinear Optical Susceptibility of Cyanine Dye J-Aggregates Doped Silica Film (II)

We tried to embed stable J-aggregates of 1,1-diethyl-2,2-cyanine bromide into a thin silica film by simple sol-gel processing. Its third order susceptibility |⁽³⁾| was about 5 × 10^–7 esu at resonance wavelength of the J band by Z-scan method using a 180-femtosecond pulse laser beam at 77 K in vacuum environment (<10^–5 Torr). The net |⁽³⁾| value of pure J-aggregates should be 4 × 10^–6 esu from the doping ration of J-aggregates in silica film.