Surface and interfacial segregation in blends of polystyrene with functional end groups and deuterated polystyrene

The effect of chain-end chemistry on surface and interfacial segregation in symmetric blends of polystyrene (hPS)/deuterated polystyrene (dPS) has been investigated by X-ray photoelectron and secondary ion mass spectroscopy in conjunction with neutron reflectivity measurements. Alpha,omega-fluoroalkyl- and alpha,omega-carboxy-terminated polystyrenes (alpha,omega-hPS(Rf)2 and alpha,omega-hPS(COOH)2) were used as end-functionalized polymers; the former possesses chain ends with lower surface energies, and the latter possesses higher surface energies compared with that of the main chain. In the case of an alpha,omega-hPS(Rf)2/dPS blend film, alpha,omega-hPS(Rf)2 was enriched at the surface owing to the surface localization of the Rf groups, although the surface energy of the hPS segments was slightly higher than that of the dPS ones. On the contrary, in the case of an alpha,omega-hPS(COOH)2/dPS blend film, dPS was preferentially segregated at the surface. This may be due to a surface depletion of COOH ends and an apparent molecular weight increase of alpha,omega-hPS(COOH)2 produced by a hydrogen-bonded intermolecular association of COOH ends in addition to the surface energy difference between hPS and dPS segments. Interestingly, both Rf and COOH chain ends were partitioned to the substrate interface for the alpha,omega-hPS(Rf)2/dPS and alpha,omega-hPS(COOH)2/dPS blend films, resulting in the segregation of the hPS component at the substrate interface for both blends. The results presented imply that surface and interfacial segregation in polymer blends could be regulated by incorporating functional groups into the end portions of one component.     

Changes in thermodynamic interactions at highly immiscible polymer/polymer interfaces due to deuterium labeling

Deuterium labeling has been shown previously to affect thermodynamic interactions at polymer surfaces, polymer/polymer heterogeneous interfaces, and in bulk (away from a surface or interface). However, the changes in polymer-polymer interactions due to deuterium labeling have not been thoroughly investigated for highly immiscible systems. It is shown here that deuterium labeling can influence polymer-polymer interactions at heterogeneous interfaces with highly immiscible systems, namely, polystyrene/poly(2-vinylpyridine) (PS/P2VP), polystyrene/poly(4-vinylpyridine) (PS/P4VP), and polystyrene/poly(methyl methacrylate) (PS/PMMA). Using secondary ion mass spectrometry, segregation of deuterium labeled polystyrene (dPS) in a dPS + unlabeled PS (dPS:hPS) blend layer was observed at the dPS:hPS/hP2VP, dPS:hPS/hP4VP, and dPS:hPS/hPMMA heterogeneous interfaces. However, a reference system involving PS on a PS brush shows no segregation of dPS to the interface.     

Polymer dynamics in hydrogenous systems by neutron reflectivity

Neutron reflectivity is a powerful tool for exploring polymer dynamics above the glass-transition temperature at short diffusion times in layered thin-film systems. Recent studies of membrane-mediated interdiffusion in deuterium-labeled systems have shown that ultrathin membranes can track the position of the interface in binary polymeric diffusion couples and also can discriminate between perdeuterated and hydrogenous polymers of the same molecular weight. This report shows that similar dynamic information can be obtained for binary hydrogenous polystyrene (hPS) diffusion couples separated by an ultrathin (6-nm) isopentylcellulose cinnamate (IPCC) membrane on Si wafers (air//hPS/IPCC/hPS//Si, where “//” represents an interface between obviously different phases and “/” represents a dynamic interface between polymeric species). In particular, the air//hPS/IPCC/hPS//Si system provides the same information as perdeuterium-labeled polystyrene (dPS) diffusion couples separated by the same IPCC membrane (air//dPS/IPCC/dPS//Si). This technique has potential applications for the study of confinement effects on thin-film dynamics and macromolecular transport across membranes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3248–3257, 2004     

The surface and solution properties of dihexadecyl dimethylammonium bromide

The surface adsorption behavior and solution aggregate microstructure of the dichain cationic surfactant dihexadecyl dimethylammonium bromide (DHDAB) have been studied using small angle neutron scattering (SANS), light scattering, neutron reflectivity (NR), and surface tension (ST). Using a combination of surface tension and neutron reflectivity, the DHDAB equilibrium surface excess at saturation adsorption has been measured as 2.60 +/- 0.05 x 10 (-10) mol.cm (-2). The values obtained by both methods are in good agreement and are consistent with the values reported for other dialkyl chain surfactants. The critical aggregation concentration (CAC) values obtained from both methods (NR and ST) are also in good agreement, with a mean value for the CAC of 4 +/- 2 x 10 (-5) M. The surface equilibrium is relatively slow, and this is attributed to monomer depletion in the near surface region, as a consequence of the long monomer residence times in the surfactant aggregates. The solution aggregate morphology has been determined using a combination of SANS, dynamic light scattering (DLS), cryogenic transmission electron microscopy (CryoTEM), and ultrasmall angle neutron scattering (USANS). Within the concentration range 1.5-80 mM, the aggregates are in the form of bilamellar vesicles with a lamellar " d-spacing" of the order of 900 A. The vesicles are relatively polydisperse with a particle size in the range 2000-4000 A. Above 80 mM, the bilamellar vesicles coexist with an additional L beta lamellar phase.     

Solvent vapor mediated polymer adsorption in thin films

The effectiveness of a "solvent annealing" process was investigated for thin (approximately 150 nm) polystyrene films, in which the diffusion and reorganization of polymer chains were mediated by the controlled absorption of cyclohexane vapor. Results were compared with conventional "thermal annealing" of films under vacuum above the glass transition temperature. Elastic recoil detection analysis (ERDA) was used to determine the surface excesses of fluorocarbon end-capped polystyrene (hPSF) and poly(styrene-b-dimethylsiloxane) (hPS-PDMS) in deuterated polystyrene (dPS) films. Both annealing methods enabled diffusion of the surface-active polymers; however, only thermal annealing gave rise to a surface excess in hPSF/dPS films. The inhibition ofhPSF adsorption under solvent annealing was due to the low surface tension of cyclohexane. In contrast, hPS-PDMS, having a larger surface-active group than that of hPSF, was found in excess at the air surface under solvent annealing, and surface excesses were consistent with the formation of saturated monolayers in blended films. The mixing of hPS-PDMS with dPS was inhibited by the unfavorable interaction between the PDMS block of the copolymer and the homopolymer. The slow interdiffusion of hPS-PDMS in dPS is consistent with the formation of micelles, and the formation of an excess layer at the air surface may be kinetically inhibited by the rate of dissociation of hPS-PDMS micelles.     

Surface structure analysis of thin dewetted polymer blend films

The surface structure of thin polymer blend films of deuterated polystyrene (dPS) and polyparamethylstyrene (PpMS) after annealing above the glass transition temperature was investigated. With scanning force microscopy (SFM) the surface topography originated by a dewetting process is detected. The sample surface is covered with small droplets consisting of several polymer molecules. Utilizing grazing incidence small angle neutron scattering (GISANS) the topographical information as well as the in‐plane composition is probed. For thin confined blend films a substructure of the droplets resulting from an additional phase separation process at different length scales is detected.     

Aggregation of a C60-didodecyloxybenzene dyad: structure, dynamics, and mechanism of vesicle growth

The mechanism of formation and the stability of spontaneously formed vesicles upon self-assembly of a partially ground-state charge-separated, nonpolar-polar-nonpolar fullerene(C60)-didodecyloxybenzene (DDB) dyad in binary solvent mixtures requiring a critical dielectric constant of approximately 30 are reported. Molecular interactions giving rise to defined vesicles with in-plane bilayer packing are detailed from the predominant van der Waals and electrostatic interactions existing on the dyad's framework. The vesicles are formed with a large bending rigidity of 18kBT, which on further extraction into a polar water medium resulted in uniform spheres that corroborated well with the theoretical predictions. Furthermore, the water-extracted spherical dyad aggregates at an increased dyad concentration, leading to the formation of giant micrometer-sized fractals following diffusion-limited cluster aggregation. These dyad aggregates act as efficient quenchers of fluorescent dyes with a quenching rate of 4.6 x 10(13) M(-1) s(-1).     

Probing polymer/polymer interfaces

Infrared-visible sum frequency generation spectroscopy (SFG) has been used to study the interface between poly(vinyl-N-octadecylcarbamate-co-vinyl acetate) (Comb) and deuterated or hydrogenated polystyrene (dPS or hPS) films. Strong methyl symmetric and Fermi resonance bands associated with the alkyl side chains of the Comb polymer are observed in the SFG spectra. In addition, for Comb/hPS spectra, symmetric and asymmetric vibration modes of phenyl groups are observed. The presence of asymmetric modes indicates the phenyl rings are tilted with respect to the interface normal.     

低能量链端对聚苯乙烯薄膜铺展和润湿行为的影响

通过低能量功能端基的表面富集作用,研究了聚苯乙烯（ＰＳ）薄膜在聚甲基丙烯酸甲酯（ＰＭＭＡ）表面上的铺展和润湿动力学．用光学显微镜跟踪了ＰＳ薄膜的润湿行为,并对高分子熔体膜中非连续部分尺寸的增大速率进行了测定．分别用ＸＰＳ和ＡＦＭ对ＰＳ薄膜的表面组成和ＰＳ液滴的平衡接触角进行了测定．发现具有低表面能的氟碳端基在薄膜表面富集使ＰＳ薄膜的表面张力下降,并使ＰＳ液滴在ＰＭＭＡ表面上的平衡接触角减小,从而使高分子熔体膜中非连续部分尺寸的增长速率下降,得到了与液液界面铺展和润湿理论一致的实验结果．     

Probing the in-plane composition of thin polymer films with grazing-incidence small-angle neutron scattering and atomic force microscopy

The surface morphologies of confined, dewetted polymer films were investigated with atomic force microscopy (AFM) and grazing-incidence small-angle neutron scattering (GISANS). On examining homopolymer films of deuterated polystyrene (dPS) both techniques reveal the resulting droplet structure which is described by one most prominent in-plane length. Due to the contrast resulting from deuteration in the case of polymer blend films of dPS and poly(p-methyl styrene) GISANS is able to probe the in-plane composition of the dewetting structure. An additional phase separation process at different length scales gives rise to a sub- and superstructure which is not detectable by AFM. In addition, the influence of the wavelength used in the GISANS experiments on the structures observed is discussed. Received: 13 April 1999 Accepted in revised form: 29 June 1999     

Carbon-13 labeling for improved tracer depth profiling of organic materials using secondary ion mass spectrometry

13C labeling is introduced as an alternative to deuterium labeling for analysis of organic materials using secondary ion mass spectrometry (SIMS). A model macromolecular system composed of polystyrene (PS) and poly(methyl methacrylate) (PMMA) was used to compare the effects of isotopic labeling using both deuterium substitution (dPS) and 13C labeling (13C-PS). Clear evidence is shown that deuterium labeling does introduce changes in the thermodynamic properties of the system, with the observation of segregation of dPS to an hPS:dPS/hPMMA interface. This type of behavior could significantly impact many types of investigations due to the potential for improper interpretation of experimental results as a consequence of labeling-induced artifacts. 13C labeling is shown to provide a true tracer for analysis using SIMS.     

Short range order of silica particles bound through adsorbed polymer layers

Small angle neutron scattering was used to examine the organization of silica spheres which had been flocculated by various cationic copolymers. When the adsorbed polymers bound the spheres without compensating their surface charge, the resulting aggregates had a liquid-like short range order. When the polymers compensated for the surface charges, we found only tenuous aggregates with self-similar structures.This work used the neutron beams of ILL in Grenoble and LLB in Saclay.     

DNA-mediated phase behavior of microsphere suspensions

We have constructed a phase diagram for DNA-modified microsphere suspensions based on experimental and theoretical studies. The system is comprised of 1 microm red fluorescent colloids functionalized with strands of an identical oligonucleotide sequence and 1 microm green fluorescent colloids functionalized with the complementary sequence. Keeping the suspension composition and temperature fixed, the phase behavior of colloidal mixtures was studied as a function of salt and oligonucleotide concentration. We observed a colloidal fluid phase of dispersed, single particles at low salt concentrations and low DNA densities. We attribute this colloidal fluid phase to unfavorable hybridization conditions. With increasing salt or hybridizing oligonucleotide concentrations, we observed phase transitions of fluid --> fluid + aggregates --> aggregates due to an increase in duplex affinity, duplex number, or both. Computational analysis assigns a 4 kBT attraction between pairs of complementary microspheres at the destabilizing fluid --> fluid + aggregates transition.     

Neutron reflection and small-angle neutron scattering studies of a fluorocarbon telomer surfactant

Dilute aqueous phase behavior of a novel tris(hydroxymethyl)acrylamidomethane (THAM)-derived telomer bearing a perfluorohexyl hydrophobic chain, F6THAM6, has been investigated. Fluorinated polyhydroxy surfactants of this kind find use in emerging biomedical applications. Neutron reflection (NR) and drop volume surface tension (DVT) methods have been used to determine the critical micelle concentration (cmc=4.7 x 10(-4) mol x dm(-3)) and surface adsorption parameters (at the cmc NR gives a molecular area a(cmc)=67.4 and 62 A(2) and surface excess gamma(cmc)=2.46 x 10(-6) mol x m(-2)). The aggregation structures were determined by small-angle neutron scattering (SANS), indicating globular (polydisperse spheres) micelles of radius approximately 30 A are present. These findings are compared with literature on surfactants with related structures, to identify how the unusual molecular structure of F6THAM6 affects surfactant properties.     

Binding of sodium dodecyl sulfate to linear and star homopolymers of the nonionic poly(methoxyhexa(ethylene glycol) methacrylate) and the polycation poly(2-(dimethylamino)ethyl methacrylate): electromotive force, isothermal titration calorimetry, surface tension, and small-angle neutron scattering measurements

We investigated the binding of sodium dodecyl sulfate (SDS) to various linear and star polymers of the nonionic methoxyhexa(ethylene glycol) methacrylate (PMHEGMA) and the ionic 2-(dimethylamino)ethyl methacrylate (PDMAEMA), the latter being a polycation at low pH. The dodecyl sulfate ion selective electrode (EMF), isothermal titration calorimetry (ITC), and surface tension (ST) were applied to gain detailed information about interactions. In all cases there is evidence of significant binding of SDS over an extensive SDS concentration range spanning from ca. 10(-6) to 0.1 mol dm(-3). At pH 3, the polymer PDMAEMA is a strong polycation and here the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At their natural pH of 8.6, PMHEGMA and PDMAEMA polymers are essentially nonionic and bind SDS in the form of polymer-bound aggregates in the concentration range of ca. 1 x 10(-3) to 3 x 10(-2) mol dm(-3). All the polymers also bind SDS to a lesser extent at concentrations below 1 x 10(-3) mol dm(-3) reaching as low as 10(-7) mol dm(-3). This low concentration binding process involves the polymer and nonassociated SDS monomers. As far as we are aware, this is the first example that such a low concentration noncooperative binding process could be observed in SDS/neutral polymer systems by EMF and ST. We also showed that the nonionic surfactant hexa(ethylene glycol) mono-n-dodecyl ether (C12EO6) and the cationic cetyltrimethylammonium bromide (C16TAB) interact with star PDMAEMA. We believe that the interaction of C12EO6 and CTAB is of similar noncooperative type as the first SDS binding process in the range from ca. 10(-5) to 0.3 x 10(-3) mol dm(-3). At the high concentration binding limit Csat of SDS, the above polymers become fully saturated with bound SDS micelles. We applied small angle neutron scattering (SANS) to determine the structure and aggregation numbers of the star polymer/bound SDS micelles and calculated the stoichiometry of such supramolecular complexes. The SANS data on PDMAEMA star polymers in the presence of C12EO6 showed only a limited monomer binding in contrast to linear PDMAEMA, which showed monomer C12EO6 binding at low concentrations but micellar aggregates at 6 x 10(-3) mol dm(-3).     

Impact of the structure of phospholipid dispersions on the stability of fluorocarbon/phospholipid emulsions for biomedical uses

The preparation of injectable fluorocarbon emulsions includes the dispersion of the phospholipids in the aqueous phase, then the admixing of the fluorocarbon to produce a crude premix; emulsification is then achieved using a high pressure mechanical procedure, followed by final heat-sterilization. In this work we report that, depending on the procedure used and energy applied, the dispersions of phospholipids consist of poorly organized unclosed “pre-liposomes”, multilamellar vesicles (MLV), or small unilamellar vesicles (SUV). This has a significant impact on the stability of the final fluorocarbon emulsions (90% (w/v) concentration), those prepared from “pre-liposomes” being more stable than those prepared from MLV or SUV. The first emulsion is shown to contain less fluorocarbon-free phospholipid vesicles than the other two. These free vesicles have previously been reported to have a detrimental effect on the stability of concentrated fluorocarbon emulsions.     

Structural studies of the phase, aggregation and surface behaviour of 1-alkyl-3-methylimidazolium halide + water mixtures

The surface, phase and aggregation behaviour of mixtures of 1-alkyl-3-methylimidazolium halide, [C(n)mim]X, where n is the alkyl chain length, with water has been explored using a variety of methods. Critical micelle concentrations (cmc) and micelle structures have been determined for aqueous [C(n)mim]Br solutions for n=2, 4, 6, 8, and 10. Small-angle neutron scattering (SANS) measurements reveal that for the n=8 and 10 systems, at concentrations just above the cmc, small near-spherical aggregates exist, which, after initial growth, possess core radii (aggregation numbers) at intermediate concentrations of 10.5+/-0.5 Angstrom (22+/-2) and 13.2+/-0.5 Angstrom (40+/-3), respectively, for n=8 and n=10. Towards higher concentrations, the aggregates appear to grow, with the aggregates in the [C(10)mim]Br system becoming increasingly elongated (prolate) with increasing concentration. No evident aggregates are formed in the systems with n=2 and 4. In the n=6 system, it appears that oblate aggregates with radius approximately 9 Angstrom form at the cmc and that the radius increases with increasing concentration. For longer alkyl chain lengths, at high concentrations lyotropic mesophases form in some systems. The mesophase region for the [C(8)mim]Cl system has been explored across the composition range using X-ray diffraction and (2)H NMR spectroscopy. Both techniques suggest that a major hexagonal phase with lattice parameter of 29.5+/-0.5 Angstrom coexists with a minor lamellar phase (23.5+/-0.3 Angstrom) or possibly a second hexagonal phase (27.1+/-0.4 Angstrom). The area per adsorbed molecule at the surface of [C(8)mim]Br solutions has been measured as a function of concentration using neutron reflectometry. A minimum in the area per molecule behaviour is coincident with a minimum identified in the surface tension isotherm occurring close to the cmc. The data suggest depletion of [C(8)mim]Br from the surface region occurs at concentrations immediately above the cmc.     

Film thickness dependence of the domain size in weakly incompatible thin polymer blend films

The surface morphology of thin polymer blend films of deuterated polystyrene (dPS) and polyparamethylstyrene (PpMS) is investigated with scanning force microscopy (SFM) and optical microscopy. From a statistical analysis of the data the most prominent in-plane length picturing the domain size as a function of the blend film thickness is determined. In ultra-thin films surface patterns directly after preparation are absent, whereas for thicker films a linear dependence is observed. After a relaxation towards equilibrium, resulting from annealing or storage under toluene vapor, the power law observed changes for ultra-thin films and remains unchanged for thicker films. Received: 27 July 2000 Accepted: 30 October 2000     

Compatibilizing effect of functionalized polystyrene blends: a study of morphology,thermal, and mechanical properties

Polystyrene (PS), being an amorphous polymer is immiscible with other polymers. To engender miscible blends, PS has been functionalized with an active amino‐functional group on the molecular chains of PS to yield amino‐substituted polystyrene (APS), which serves as a reactive compatibilizer. The compatibilization effect of amino functionalized polystyrene on the rubber toughening was explored and results were compared in terms of morphology, thermal, and mechanical properties of PS/SEBS‐g‐MA versus APS/SEBS‐g‐MA blends. In addition, the effect of rubber content on the blend morphology and mechanical properties were investigated. An appreciable change in the thermal stability of APS blends in comparison with PS blend has been probed. A marked correlation has been observed between phase morphology and thermal stability. Use of APS produced the compatibilized blends which render improved blend morphology, enhanced thermal and mechanical properties. Optimal thermal, morphological and mechanical profiles were depicted by 20‐wt% APS blend. Copyright © 2008 John Wiley & Sons, Ltd.     

Polyelectrolyte and surfactant mixed solutions. Behavior at surfaces and in thin films

Dilute mixed solutions of non-surface active anionic polymers (polyacrylamide and polystyrene sulfonate, xanthan) and various surfactants have been studied with several methods: surface tension, ellipsometry, X-ray and neutron reflectivity, thin film balance, surface and bulk rheology. A strong synergistic lowering of the surface tension is found with cationic surfactants in the concentration range where no appreciable complexation of surfactant and polymer occurs in the bulk solution (as seen from viscosity measurements). Despite appreciable differences between surface tension behaviour, the adsorbed layer is very similar for all the polymers: their thickness is small and the polymer chains are stretched along the surface. The surface tension behaviour of these polymers with non-ionic surfactants is also different. When the polymers are confined in thin films, the forces between surfaces are similar, and independent of surfactant nature: oscillatory forces are measured, which reflect the existence of a polymer network with a well defined mesh size. The connection of foam stability with surface and bulk complexation is far from clear.