等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Titanium(IV) chloride and quaternary ammonium salt promoted Baylis-Hillman reaction.

The Baylis-Hillman reaction of aldehydes with alpha,beta-unsaturated ketones can be drastically affected by the reaction temperature and Lewis bases. When the reaction was carried out at -78 degrees C using catalytic amounts of quaternary ammonium salts (R4N+X-, X = Cl, Br, I) as Lewis bases, in the presence of titanium(IV) chloride, the chlorinated aldol adduct 1 was obtained as the major product. Quaternary ammonium bromides and iodides (R4N+X-, X = Br, I) have higher catalytic activity than corresponding chlorides (R4N+Cl-). Quaternary ammonium fluorides (R4N+F-) do not have activity at all. The amounts of Lewis acid and quaternary ammonium salts used affect the reaction rate and product. A plausible reaction mechanism is proposed. If the reaction was carried out at room temperature (about 20 degrees C) in the presence of titanium(IV) chloride and quaternary ammonium salts (R4N+X-, X = Cl, Br, I), the elimination product 3, derived from 1, was formed as the major product.     

Engineering quaternized chitosan in the 3D bacterial cellulose structure for antibacterial wound dressings

Balancing antibacterial properties with biocompatibility is of paramount importance for wound dressings loaded with antibacterial agents. In this work, a water soluble antibacterial agent, quaternized chitosan (hydroxypropyltrimethyl ammonium chloride chitosan, HACC) with an appropriate degree of substitution was introduced into the bacterial cellulose (BC) network by adding it into the BC culture medium. Results indicated that the addition of HACC could affect the yield of BC, porous structure, thermal stability, water absorption and antibacterial properties. HBC-1 with a low content of HACC (13.65 ± 0.30%) cannot inhibit the biofilm formation of bacteria, while HBC-3 with a high content of HACC (62.05 ± 0.90%) has a low yield of BC and confused structure. HBC-2 with an optimum concentration of HACC (37.33 ± 0.80%) possessed a typical porous structure, acceptable thermal stability, good water absorption and favorable antibacterial properties against Staphylococcus aureus (S. aureus, ATCC 25923) and methicillin-resistant S. aureus (ATCC 43300). Most importantly, none of the HACC/BC films exhibited cytotoxicity to NIH3T3 cells. We believe that obtained HACC/BC films with favorable bactericidal properties and biocompatibility could be potential candidates for wound dressings in clinical applications.     

Quaternary ammonium chitosan derivative dynamic coating for the separation of veterinary sulfonamide residues by CE with field-amplified sample injection

A quaternary ammonium chitosan, 2-hydroxypropyltrimethylammonium chloride chitosan (HACC), has been developed for the dynamic coating material in CE for the first time. It presented many advantages such as favorable water solubility, satisfactory coating efficiency, and EOF toward the anode at pH >7.0. Using the modified fused-silica capillary, sulfonamides (SAs), an important group of veterinary drugs, were separated and detected by CE combined with field-amplified sample injection (FASI). The LODs of sulfonamides with UV detection were less than 0.5 ng/mL. The proposed method has been applied to the determination of veterinary sulfonamide residues in samples such as chicken, beef, and honey with fast separation (15 sulfonamides within 20 min), low LODs (0.1-0.5 ng/mL), and good reliability compared to the criteria of China (GB/T 18932.17-2003).     

高效抗菌Cu2+-壳聚糖季铵盐/丙烯酸复合物的制备

以过硫酸铵为引发剂,在壳聚糖季铵盐（HACC）上接枝丙烯酸（AAc）并络合Cu²⁺,制备了具有高效抗菌性能的HACC-g-PAAc-Cu²⁺复合物.采用红外光谱（FTIR）和核磁共振波谱（¹H NMR）表征了壳聚糖季铵盐接枝改性前后的化学结构变化;利用紫外-可见吸收光谱（UV-Vis）、Cu²⁺选择电极和热失重分析（TGA）表征了壳聚糖季铵盐接枝前后负载Cu²⁺的能力;测定了HACC-Cu²⁺和HACC-g-PAAc-Cu²⁺对金黄色葡萄球菌及大肠杆菌的最小抑菌浓度,并对小鼠经口摄入毒性和兔皮肤敷涂刺激性进行了考察.研究结果表明,在壳聚糖季铵盐上负载Cu²⁺能够有效提高其抗菌性;接枝丙烯酸能提高HACC负载Cu²⁺的能力和抗菌性,Cu/HACC结构单元的摩尔比由接枝前的3：7提高到接枝后的1：1;对金黄色葡萄球菌的最小抑菌浓度由60 mg/L下降到9.2 mg/L,对大肠杆菌的最小抑菌浓度由37 mg/L下降到6.3 mg/L,无摄入毒性和皮肤刺激性.     

Synthesis, Structure and Properties of Novel Quaternized Carboxymethyl Chitosan with Drug Loading Capacity

A modified approach to prepare novel amphipathic octadecyl-quaternized carboxymethyl chitosan (QACMC) was reported, in which carboxymethyl chitosan (CMC), prepared from chitosan, was made to react with glycidyl octadecyl dimethylammonium chloride; thus, the octadecyl quaternary ammonium group was introduced into CMC. The structure and thermal properties of these derivatives were characterized by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H-NMR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The crystalline properties of QACMC were perfect, and it had a high degree of crystallinity. All the chitosan derivatives had good thermal stability when the temperature was lower than 200 °C. The moisture-absorption and retention abilities of QACMC were lower than that of hyaluronic acid (HA) and CMC. The carboxymethyl and quaternary ammonium groups did not show a synergistic effect, and the effects of both the molar mass and the hydrophobic side chains of long alkyl moieties were important. Minocycline hydrochloride was successfully incorporated into QACMC polymeric micelles with a remarkably high efficiency (10.9%, mass fraction). QACMC promises to be a high-potential delivery vector for lipophilic drugs.     

新型载药壳聚糖季铵盐的合成、结构与性能

通过羧甲基壳聚糖接枝二甲基十八烷基环氧丙基氯化铵, 制备了一系列不同取代度和分子量的羧甲基壳聚糖十八烷基季铵盐(QACMC). 用傅立叶变换红外(FTIR)光谱、核磁共振谱(1H-NMR)、X射线衍射(XRD)谱、差式扫描量热法(DSC)等对其分子结构、结晶和热性能进行研究, 同时研究QACMC的吸湿保湿性能, 并与透明质酸(HA)、壳聚糖(chitosan)和羧甲基壳聚糖(CMC)进行比较. 结果表明, QACMC具有较好的结晶性和热稳定性, 结晶度可达72.3%; 其吸湿保湿性低于透明质酸(HA)和羧甲基壳聚糖, 而受季铵基团取代度和QACMC分子量的影响, 羧酸盐和季铵盐两种亲水基团对QACMC吸湿性的影响不具有协同作用; QACMC对亲脂性药物盐酸米诺环素的载药率可达10.9%(质量分数), 远高于壳聚糖和羧甲基壳聚糖.     

Synthesis of Hydroxypropyltrimethyl Ammonium Chitosan Derivatives Bearing Thioctate and the Potential for Antioxidant Application

Hydroxypropyltrimethyl ammonium chloride chitosan (HACC) is one of the most important water-soluble chitosan derivatives; its derivatives have gained growing attention due to their potential biomedical applications. Here, hydroxypropyltrimethyl ammonium chitosan derivatives bearing thioctate (HACTs), with different degrees of substitution of thioctate, were prepared using HACC and α-lipoic acid as the reaction precursors, using an ion exchange method. The structural characteristics of the synthesized derivatives were confirmed by FTIR, ¹H NMR, and ¹³C NMR spectroscopy. In addition, their antioxidant behaviors were also investigated in vitro by the assays of reducing power, and scavenging activities against hydroxyl radicals and DPPH radicals. The antioxidant assay indicated that HACTs displayed strong antioxidant activity compared with HACC, especially in terms of reducing power. Besides, the antioxidant activities of the prepared products were further enhanced with the increase in the test concentration and the degrees of substitution of thioctate. At the maximum test concentration of 1.60 mg/mL, the absorbance value at 700 nm of HACTs, under the test conditions, was 4.346 ± 0.296, while the absorbance value of HACC was 0.041 ± 0.007. The aforementioned results support the use of HACTs as antioxidant biomaterials in food and the biomedical field.     

Novel 2-Hydroxypropyltrimethyl Ammonium Chitosan Derivatives: Synthesis,Characterization, Moisture Absorption and Retention Properties

Recent years have seen a steady increase in interest and demand for the use of humectants based on biodegradable natural polymers in many fields. The aim of this paper is to investigate the moisture absorption and retention properties of 2-hydroxypropyltrimethyl ammonium chitosan derivatives which were modified by anionic compounds via ion exchange. FTIR, ¹H NMR, and ¹³C NMR spectroscopy were used to demonstrate the specific structures of chitosan derivatives. The degrees of substitution for objective products were calculated by the integral ratio of hydrogen atoms according to ¹H NMR spectroscopy. Meanwhile, moisture absorption of specimens was assayed in a desiccator at different relative humidity (RH: 43% and 81%), and all target products exhibited enhanced moisture absorption. Furthermore, moisture retention measurement at different relative humidity (RH: 43%, 81%, and drier silica gel) was estimated, and all target products possessed obviously improved moisture retention property. Specifically, after 48 h later, the moisture retention property of HACBA at 81% RH was 372.34%, which was much higher than HA (180.04%). The present study provided a novel method to synthesize chitosan derivatives with significantly improved moisture absorption and retention properties that would serve as potential humectants in biomedical, food, medicine, and cosmetics fields.     

Balance of disinfection and cytotoxicity of hydroxypropyltrimethyl ammonium chloride chitosan with polyhexamethylene biguanide at low concentrations

Any microorganisms killing molecules have some cytotoxicity more or less. The effective way of reducing cytotoxicity mainly included two approaches: One was reducing the concentration of antiseptic, while this would lead to the decreased antimicrobial efficiency; the other way was choosing suitable antiseptics and then combining of them, which can balance the disinfection and cytotoxicity. In this paper, hydroxypropyltrimethyl ammonium chloride chitosan (HACC), a cationic natural macromolecular, as the first antiseptic, incorporated with polyhexamethylene biguanide (PHMB), a smaller molecular weight cationic antiseptic polymer, as the second antiseptic, their disinfection effect and cell cytotoxicity in borate buffer solution were investigated at fairly low contents. When HACC/PHMB weight ratios were 100/1 and 150/1, the disinfection solutions produced >1-log reductions against C. albicans and >3-log reductions against S. aureus and P. aeruginosa. HACC/PHMB disinfection solution at weight ratio of 150/1 even showed a highest antimicrobial efficiency and the cell proliferation rates were approximately 100% in MTT assays. Meanwhile, the research of micromorphology and fluorescence spectra indicated that bigger aggregation state of HACC-PHMB were helpful to improve antimicrobial ability. These results showed that the HACC-PHMB combination might be a promising candidate for novel antimicrobial group for biomedical applications.     

新型含胍基和季铵基团壳聚糖衍生物的合成

N,N-二甲基-1,3-丙二胺与单氰胺经亲核加成反应制得中间体N,N-二甲基-N′-胍基-1,3-丙二胺（2）; 以壳聚糖为起始原料,依次与氯乙酸、环氧氯丙烷经取代反应制得N-（1-羟基-3-氯丙基）-羧甲基壳聚糖（4）; 4与2经季铵化反应合成了一系列含有胍基和季胺基团的羧甲基壳聚糖衍生物（5）,其结构经¹H NMR, IR和元素分析表征。研究了反应配比［γ=m（2）∶m（4）］和反应时间对5取代度的影响,结果表明,当γ为3∶1,反应时间为10 h时,取代度最高(73%)。