Study on the RF performance of 2-cell superconducting cavity

The physical design of the 2-cell superconducting cavity is presented.The RF parameters of the cavity and HOMs (high order modes) are reported.In this paper,we put the emphasis on the analysis of the HOMs and interaction between beam and cavity.     

Measuring the performance of the coaxial HOM coupler on a 2-cell TESLA-shape copper cavity

Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cellTESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper.     

Measuring the performance of the coaxial HOM coupler on a 2-cell TESLA-shape copper cavity

Coaxial High Order Mode （HOM） couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cell TESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper.     

Cold RF test and associated mechanical features correlation of a TESLA-style 9-cell superconducting niobium cavity built in China

The RF performance of a 1.3 GHz 9-cell superconducting niobium cavity was evaluated at cryogenic temperatures following surface processing by using the standard ILC-style recipe. The cavity is a TESLA-style 9-cell superconducting niobium cavity, with complete end group components including a higher order mode coupler, built in China for practical applications. An accelerating gradient of 28.6 MV/m was achieved at an unloaded quality factor of 4×10⁹. The morphological property of mechanical features on the RF surface of this cavity was characterized through optical inspection. Correlation between the observed mechanical features and the RF performance of the cavity is attempted.     

射频超导腔加速性能的改进

为提高超导加速腔的加速梯度和Q值,改进了薄膜型超导腔的加速性能。研究证明,对于铜铌溅射腔,在无氧铜衬底和铌膜之间加入NbN 层可以提高铌膜的超导转变温度,改善晶格结构;对纯铌超导腔提出了改进方法,在传统的纯铌超导腔表面制备多层的超导-绝缘-超导复合膜可以屏蔽Nb腔表面的界面场,提高超导腔的临界磁场,从而提高了铌腔的加速梯度。     

A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results

A resonant buildup of beam-induced fields in a superconducting radio frequency (RF) cavity may make a beam unstable or a superconducting RF cavity quench. Higher-order mode (HOM) couplers are used for damping higher-order modes to avoid such a resonant buildup. A coaxial HOM coupler based on the TTF (TESLA Test Facility) HOM coupler has been designed for the superconducting RF cavities at the Proton Engineering Frontier Project (PEFP) in order to overcome notch frequency shift and feed-through tip melting issues. In order to confirm the HOM coupler design and finalize its structural dimensions, two prototype HOM couplers have been fabricated and tested. Low-power testing and measurement of the HOM couplers has shown that the HOM coupler has good filter properties and can fully meet the damping requirements of the PEFP low-beta superconducting RF linac.     

A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results

A resonant buildup of beam-induced fields in a superconducting radio frequency(RF)cavity may make a beam unstable or a superconducting RF cavity quench. Higher-order mode(HOM)couplers are used for damping higher-order modes to avoid such a resonant buildup. A coaxial HOM coupler based on the TTF (TESLA Test Facility)HOM coupler has been designed for the superconducting RF cavities at the Proton Engineering Frontier Project(PEFP)in order to overcome notch frequency shift and feed-through tip melting issues. In order to confirm the HOM coupler design and finalize its structural dimensions, two prototype HOM couplers have been fabricated and tested. Low-power testing and measurement of the HOM couplers has shown that the HOM coupler has good filter properties and can fully meet the damping requirements of the PEFP low-beta superconducting RF linac.     

2-cell超导腔的高阶模分析

 阐述了2-cell Telsa腔的设计。用3维程序HFSS分析了其高阶模的特点，给出了高阶模的主要参数频率、品质因数、分路阻抗以及模式的电场分布，并且π模的电场分布与Superfish的模拟结果相比较，两者是一致的。最后，简要分析了各高阶模对电子加速的影响，分析表明高阶模降低了电子加速效率和束流的稳定性。     

Study and design of RF coupler for Chinese ADS HWR superconducting cavity

An RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15 kW RF power from the power source to the superconducting HWR cavity. According to the requirement of working frequency, power level, transmission capability and cooling condition, the physics design of coupler has been finished, which includes RF structure optimization, thermal simulation, thermal stress analysis and so on. Based on this design, the prototype of HWR coupler has been fabricated, and it has successfully passed the high power test.     

Study and design of RF coupler for Chinese ADS HWR superconducting cavity

An RF power coupler is a key component of the superconducting accelerating system in Chinese ADS proton linac injector I, which is used to transmit 15 kW RF power from the power source to the superconducting HWR cavity. According to the requirement of working frequency, power level, transmission capability and cooling condition, the physics design of coupler has been finished, which includes RF structure optimization, thermal simulation, thermal stress analysis and so on. Based on this design, the prototype of HWR coupler has been fabricated, and it has successfully passed the high power test.     

溅射方法干式处理超导加速腔表面的研究与分析

详细研究了利用超高真空氩离子清洗技术发展的一种超导铌腔表面的“干式”处理方法,从微观和宏观角度分析了溅射处理对铌的表面特性和对超导腔性能的影响.与传统的“湿式”处理方法(化学抛光BCP和电抛光EP)相比,干式处理方法具有结构简单、容易控制、没有污染等优点,是一种很有潜力的超导腔处理方法,可以提高超导腔的性能. 关键词： 超导加速腔 溅射 形貌分析 残留电阻比RRR     

Design and study of a high-current 5-cell superconducting rf cavity

The Advanced Photon Source (APS) at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray user community. This work specifically focuses on the design of an optimized 5-cell superconducting radio-frequency structure well suited for a high-energy, high-beam-current energy recovery linac. The cavity design parameters are based on the APS storage ring nominal 7 GeV and 100 mA beam operation. A high-current 5-cell cw superconducting cavity operating at 1.4 GHz has been designed. In order to achieve a high current, the accelerating cavity shape has been optimized and large end-cell beam pipes have been adopted. The beam break-up threshold of the cavity has been estimated using the code TDBBU, which predicts a high threshold beam current for a 7 GeV energy recovery linac model. A copper prototype cavity has been fabricated that uses half-cell modules, initially assembled by clamping the cells together.     

Design and study of a high-current 5-cell superconducting rf cavity

The Advanced Photon Source （APS） at Argonne National Laboratory is considering the development of a superconducting linac-based fourth-generation hard X-ray source to meet future scientific needs of the hard X-ray user community. This work specifically focuses on the design of an optimized 5-cell superconducting radio-frequency structure well suited for a high-energy, high-beam-current energy recovery linac. The cavity design parameters are based on the APS storage ring nominal 7 GeV and 100 mA beam operation. A high-current 5-cell cw superconducting cavity operating at 1.4 GHz has been designed. In order to achieve a high current, the accelerating cavity shape has been optimized and large end-cell beam pipes have been adopted. The beam break-up threshold of the cavity has been estimated using the code TDBBU, which predicts a high threshold beam current for a 7 GeV energy recovery linac model. A copper prototype cavity has been fabricated that uses half-cell modules, initially assembled by clamping the cells together.     

射频超导腔加速性能的改进

 为提高超导加速腔的加速梯度和Q值，改进了薄膜型超导腔的加速性能。研究证明，对于铜铌溅射腔，在无氧铜衬底和铌膜之间加入NbN 层可以提高铌膜的超导转变温度，改善晶格结构；对纯铌超导腔提出了改进方法，在传统的纯铌超导腔表面制备多层的超导-绝缘-超导复合膜可以屏蔽Nb腔表面的界面场，提高超导腔的临界磁场，从而提高了铌腔的加速梯度。     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance.It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry.The simulation result is compared with the result of the semi-analytical model in the end.     

1+1/2 Cell超导加速腔的本征高阶模场分布研究

为实现高平均流强加速, 需要有效地消除超导加速腔中的高阶模场. 为研制有效的高阶模耦合器, 本文对北京大学DC-SC光阴极超导注入器的核心部件—1+1/2 cell超导加速腔中高阶模场进行了分析研究, 用HFSS程序计算给出前31个高阶模场参数, 与实验测量较为符合. HFSS计算与Superfish计算结果比较符合很好, 验证用HFSS计算可靠, 为以后超导腔的升级研究提供有效的手段.     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance. It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry. The simulation result is compared with the result of the semi-analytical model in the end.     

Design of a higher harmonic cavity for the SSRF storage ring

Higher harmonic cavity used in the third generation synchrotron light source increases the Touschek lifetime. The higher harmonic cavity of Shanghai Synchrotron Radiation Facility (SSRF) is a 1.5GHz passive superconducting cavity. Its higher order modes (HOM) are extracted by a ferrite HOM damper out of the cryostat. Multi-cell cavity is chosen concerning the voltage. The harmonic cavity dynamics, beam dynamics with passive harmonic cavity and the design of single cell cavity are included in this paper.     

Design and simulation of a new type of 500 MHz single-cell superconducting RF cavity

This paper illustrates the design and simulation of a unique 500 MHz single-cell superconducting radio frequency cavity with a fluted beam pipe and a coaxial-type fundamental power coupler. The simulation results show that the cavity has a high r/Q value, a low peak surface field and a large beam aperture, so it can be a candidate cavity for high current accelerators. With the help of a fluted beam tube, almost all the higher order modes can propagate out of the cavity, especially the first two dipole modes, TE₁₁₁ and TM₁₁₀, and the first higher monopole mode, TM₀₁₁. The external quality factor of the coaxial fundamental power coupler is optimized to 1.2×10⁵, which will be useful when it is applied in the light source storage ring.     

Tuning for the first 9-cell TESLA cavity of PKU

A method based on circuit model is used to tune the first home-made 9-cell TESLA type superconducting niobium cavity at Peking University.After tuning,a flat field profile with a final π-mode frequency within 3 kHz of target frequency is achieved.The field flatness is measured by a bead-pull method,and the relative electric field is calculated from the frequency shift perturbed by the bead stepping along the axis of the cavity.