Hydrogen storage in metal-organic frameworks by bridged hydrogen spillover

The possible utilization of hydrogen as the energy source for fuel-cell vehicles is limited by the lack of a viable hydrogen storage system. Metal-organic frameworks (MOFs) belong to a new class of microporous materials that have recently been shown to be potential candidates for hydrogen storage; however, no significant hydrogen storage capacity has been achieved in MOFs at ambient temperature. Here we report substantially increased hydrogen storage capacities of modified MOFs by using a simple technique that causes and facilitates hydrogen spillover. Thus, the storage of 4 wt % is achieved at room temperature and 100 atm for the modified IRMOF-8. The adsorption is reversible, and the rates are fast. That has made MOFs truly promising for hydrogen storage application.     

Methyl orange degradation enhanced by hydrogen spillover onto platinum nanocatalyst surface

Following a thermal reduction method, platinum nanoparticles were synthesized and stabilized by polyvinylpyrrolidone. The colloidal platinum nanoparticles were stable for more than 3 months. The micrograph analysis unveiled that the colloidal platinum nanoparticles were well dispersed with an average size of 2.53 nm. The sol–gel‐based inverse micelle strategy was applied to synthesize mesoporous iron oxide material. The colloidal platinum nanoparticles were deposited on mesoporous iron oxide through the capillary inclusion method. The small‐angle X‐ray scattering analysis indicated that the dimension of platinum nanoparticles deposited on mesoporous iron oxide (Pt‐Fe₂O₃) was 2.64 nm. X‐ray photoelectron spectroscopy (XPS) data showed that the binding energy on Pt‐Fe₂O₃ surface decreased owing to mesoporous support–nanoparticle interaction. Both colloidal and deposited platinum nanocatalysts improved the degradation of methyl orange under reduction conditions. The activation energy on the deposited platinum nanocatalyst interface (2.66 kJ mol^?1) was significantly lowered compared with the one on the colloidal platinum nanocatalyst interface (40.63 ± 0.53 kJ mol^?1).     

Isotope tracer study of hydrogen spillover on carbon-based adsorbents for hydrogen storage

A composite material comprising platinum nanoparticles supported on molecular sieve templated carbon was synthesized and found to adsorb 1.35 wt % hydrogen at 298 K and 100 atm. The isosteric heat of adsorption for the material at low coverage was approximately 14 kJ/mol, and it approached a value of 10.6 kJ/mol as coverage increased for pressures at and above 1 atm. The increase in capacity is attributed to spillover, which is observed with the use of isotopic tracer TPD. IRMOF-8 bridged to Pt/C, a material known to exhibit hydrogen spillover at room temperature, was also studied with the hydrogen-deuterium scrambling reaction for comparison. The isotherms were reversible. For desorption, sequential doses of H2 and D2 at room temperature and subsequent TPD yield product distributions that are strong indicators of the surface diffusion controlled reverse spillover process.     

Chemisorption and hydrogen spillover on framework ruthenium catalysts

Conclusions Thermal-desorption and isotope methods were used to investigate the state of hydrogen found on the surface of ruthenium framework catalysts. The possibility of the migration of chemisorbed hydrogen from the ruthenium was demonstrated.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1712–1715, August, 1988.     

Revealing hydrogen spillover pathways in reducible metal oxides

Hydrogen spillover, the migration of dissociated hydrogen atoms from noble metals to their support materials, is a ubiquitous phenomenon and is widely utilized in heterogeneous catalysis and hydrogen storage materials. However, in-depth understanding of the migration of spilled hydrogen over different types of supports is still lacking. Herein, hydrogen spillover in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was elucidated by combining systematic characterization methods involving various in situ techniques, kinetic analysis, and density functional theory calculations. TiO₂ and CeO₂ were proven to be promising platforms for the synthesis of non-equilibrium RuNi binary solid solution alloy nanoparticles displaying a synergistic promotional effect in the hydrolysis of ammonia borane. Such behaviour was driven by the simultaneous reduction of both metal cations under a H₂ atmosphere over TiO₂ and CeO₂, in which hydrogen spillover favorably occurred over their surfaces rather than within their bulk phases. Conversely, hydrogen atoms were found to preferentially migrate within the bulk prior to the surface over WO₃. Thus, the reductions of both metal cations occurred individually on WO₃, which resulted in the formation of segregated NPs with no activity enhancement.

The hydrogen spillover pathway in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was investigated by combining various in situ characterization techniques, kinetic analysis, and density functional theory calculations.     

Adsorption of spillover hydrogen atoms on single-wall carbon nanotubes

Spillover of hydrogen on nanostructured carbons is a phenomenon that is critical to understand in order to produce efficient hydrogen storage adsorbents for fuel cell applications. The spillover and interaction of atomic hydrogen with single-walled carbon nanotubes (SWNTs) is the focus of this combined theoretical and experimental work. To understand the spillover mechanism, very low occupancies (i.e., 1 and 2 H atoms adsorbed) on (5,0), (7,0), (9,0) zigzag (semiconducting) SWNTs and a (5,5) armchair (metallic) SWNT, with corresponding diameters of 3.9, 5.5, 7.0, and 6.8 A, were investigated. The adsorption binding energy of H atoms depends on H occupancy, tube diameter, and helicity (or chirality), as well as endohedral (interior) vs exohedral (exterior) binding. Exohedral binding energies are substantially higher than endohedral binding energies due to easier sp(2)-sp(3) transition in hybridization of carbon on exterior walls upon binding. A binding energy as low as -8.9 kcal/mol is obtained for 2H atoms on the exterior wall of a (5, 0) SWNT. The binding energies of H atoms on the metallic SWNT are significantly weaker (about 23 kcal/mol weaker) than that on the semiconductor SWNT, for both endohedral and exohedral adsorption. The binding energy is generally higher on SWNTs of larger diameters, while its dependence on H occupancy is relatively weak except at very low occupancies. Experimental results at 298 K and for pressures up to 10 MPa with a carbon-bridged composite material containing SWNTs demonstrate the presence of multiple adsorption sites based on desorption hysteresis for the spiltover H on SWNTs, and the experimental results were in qualitative agreement with the molecular orbital calculation results.     

Significantly enhanced hydrogen storage in metal-organic frameworks via spillover

The utilization of hydrogen in fuel-cell powered vehicles is limited by the lack of a safe and effective system for hydrogen storage. At the present time, there is no viable storage technology capable of meeting the DOE targets. Porous metal-organic frameworks (MOFs) are novel and potential candidates for hydrogen storage. Until now it is still not possible to achieve any significant hydrogen storage capacity in MOFs at ambient temperature. Here, we report, for the first time, significant amounts of hydrogen storage in MOF-5 and IRMOF-8 at ambient temperature by using a very simple technique via hydrogen dissociation and spillover. Thus, hydrogen uptakes for MOF-5 and IRMOF-8 can be enhanced by a factor of 3.3 and 3.1, respectively (to nearly 2 wt % at 10 MPa and 298 K). Furthermore, the isotherms are totally reversible. These findings suggest that our technique is suitable for hydrogen storage in a variety of MOF materials because of their similar structures as MOF-5 and IRMOF-8.     

Influence of the liquid phase vapor pressure on the hydrogen spillover

Hydrogen spillover in the presence of water and alcohol vapor has been studied by semiconductor sensors. The conductivity of sensors increases at low vapor pressure and decreases as the pressure increases. Apparently it becomes easier for activated hydrogen to migrate from Pt to ZnO when a solvated protons form in liquid islands in the vicinity of metal particles.     

Novel dual-bed reactors: utilization of hydrogen spillover in reactor design

Hydrogen spillover over macroscopic distances was demonstrated and exploited in the design of two novel catalytic reactors for 1-butene isomerization. A dual-bed reactor containing separate zones of noble metal and bimetallic catalysts yielded activities up to 2.7 times greater than that of the noble metal alone. The noble metal catalyst contained palladium supported on graphitic carbon. The bimetallic catalyst contained a base metal, either iron or cobalt, and a lanthanide metal, either cerium or praseodymium, also supported on graphitic carbon. The bimetallic catalysts by themselves had no measurable activity at the current experimental conditions. Results from a dual-bed, dual-feed reactor using the same catalysts showed dramatic activity increases relative to controls. In this reactor, the hydrocarbon never contacted the noble metal catalyst, yet substantial hydrocarbon conversion was measured. No hydrocarbon conversion was detected when blank support replaced the bimetallic catalyst or when no material at all was placed above the noble metal catalyst. In both reactors, the activity increase was attributed to hydrogen spillover. That is, molecular hydrogen adsorbed and dissociated on the noble metal catalyst. The adsorbed atomic hydrogen was then transported via surface diffusion to the bimetallic catalyst, activating those sites. The results also demonstrated that a catalytic reaction may occur at distinctly different reactive sites and that catalysts may be selected to promote specific steps within the reaction.     

Fundamental studies and perceptions on the spillover mechanism for hydrogen storage

In this feature article, the atomic-scale understanding of the hydrogen spillover mechanism for hydrogen storage in metal-doped carbon materials and metal-organic frameworks is discussed by critically assessing recent computational and experimental studies. It is argued that the spillover mechanism involves: (a) the generation and desorption of mobile H atoms on the metal nanoparticles (b) the diffusion of H atoms in weakly-bound states on the support (c) the sticking and immobilization of H atoms at preferential locations of the receptor where barriers to sticking are decreased, and, (d) the Eley-Rideal recombination of the adsorbed H atoms with diffusing mobile H atoms to form H(2). The implications and open questions on the mechanism and effectiveness of hydrogen storage by spillover are critically assessed.     

Activation of nitriles by hydrogen bonding in cycloadditions with nitrile oxides

The dipolarophilic activity of aromatic nitriles in cycloaddition with benzonitrile oxides is remarkably enhanced by ortho-acylamino substituents. The activation depends upon the solvent and can be ascribed to a hydrogen bond which assists cycloaddition.     

Catalytic hydrogen transfer over magnesia, IXa. reduction of long chain aliphatic ketones by 2-propanol

A series of symmetrical long chain aliphatic ketones of general formula CH₃−(CH₂)_n-CO-(CH₂)₂−CH₃, where n=4,5,6,7 and 8, has been used as hydrogen acceptors from 2-propanol at 573–723 K in the presence of MgO catalyst under flow conditions. The yeilds of the appropriate alcohols exceeded 50%. Above 623 K the consecutive dehydration of the alcohols formed took place with moderate yields leading to internal alkenes. The direct one-step synthesis of C₁₃ alkene from 7-tridecanone has been realized under catalytic transfer reduction (CTR) conditions with high yield (>90%) over a MgO catalyst of enhanced acidity. Part VIII: Appl. Catal. A.:General,150, 77 (1997)     

Study of solid-state catalytic isotope exchange of hydrogen inl-hydroxyproline under the action of spillover tritium

Reaction of high-temperature solid-state catalytic isotope exchange (HSCIE) of hydrogen in L-hydroxyproline was studied byab initio quantum-chemical calculations. A one-center synchronous mechanism of isotope exchange between the amino acid and the H₃O⁺ model acidic center was considered. The structures of transition states of the reaction and the activation energies were determined. Relative reactivity of the C−H bonds in the hydroxyproline molecule under conditions of HSCIE was studied. The results obtained are in agreement with experimental data on the stereoselectivity and regioselectivity of the HSCIE reaction,viz., the lower the calculated activation energy of isotope exchange, the larger the portion of hydrogen substituted by tritium in a given position of the amino acid molecule. The enhancement of the reactivity under conditions of solid-state isotope exchange can be associated with additional interaction between the exchanging H atoms and the electron-donor O and N atoms of the amino acid molecule in transition state. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1056–1060, June, 1999.     

Activation of electron transfer reduction of p-benzoquinone derivatives by intermolecular regioselective hydrogen bond formation

Electron transfer reduction of p-benzoquinones by cobalt tetraphenylporphyrin is enhanced significantly by the presence of o-bis(phenylcarbamoylmethyl)benzene (o-L) due to the regioselective hydrogen bond formation between the corresponding semiquinone radical anions and o-L, whereas m- and p-isomers (m-L and p-L) have no effect on the electron transfer equilibrium or the rate.