新型聚芳醚酮与热致性液晶高聚物共混物流变性能和力学性能的研究

 本文研究了新型聚芳醚酮与热致性液晶高聚物(PEK-C/LCP)共混物的流变性能及力学性能。结果表明:由于LCP的加入,PEK-C的熔体粘度降低;随着剪切速率的增加,共混物熔体流动活化能从223.5KJ/mol降为102.2KJ/mol。共混物的玻璃化转变温度从纯PEK-C的218℃降为199℃;除模量增加外,其它力学性能均有所下降。同时利用SEM观察了共混物冲击断面形貌,未发现有LCP微纤维生成。     

新型聚芳醚酮与热致性液晶高聚物共混物流变性能和力学性能的研究

本文研究了新型聚芳醚酮与热致性液晶高聚物(PEK-C/LCP)共混物的流变性能及力学性能。结果表明:由于LCP的加入,PEK-C的熔体粘度降低;随着剪切速率的增加,共混物熔体流动活化能从223.5KJ/mol降为102.2KJ/mol。共混物的玻璃化转变温度从纯PEK-C的218℃降为199℃;除模量增加外,其它力学性能均有所下降。同时利用SEM观察了共混物冲击断面形貌,未发现有LCP微纤维生成。     

两种高Tg非线性光学聚合物母体及掺杂,极化的研究

利用具有非线性光学活性的对硝基苯胺掺杂高玻璃化转变温度的聚芳醚砜(PES-C)和聚芳醚酮(PEK-C),得到了两种掺杂含量较高的掺杂型非线性光学聚合物体系。电晕极化表明较高的取向和较慢的松驰。     

环氧树脂／酚酞聚醚醚砜共混物的相行为

酚酞聚醚醚砜(PES-c)同未交联的双酚A二缩水甘油醚(DGEBA)环氧树脂的共混物呈单一的玻璃化转变温度,其相容性主要归因于混合熵的贡献。PES-C同交联的环氧树脂之间的相容性与所用的固化剂有关。以胺类作DGEBA的固化剂时,共混物不发生相分离;以酸酐作固化剂时,共混物发生相分离。     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_(max))、峰高(△C_(pmax))和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

PEK-C/PPS共混体系的相容性和结晶行为

结晶-非晶高聚物共混体系的相容性和结晶行为的研究已有许多报道。本工作研究了含酞侧基聚芳醚酮(PEK-C)与聚苯硫醚(PPS)共混物的相容性和结晶行为。 PEK-C为徐州工程塑料厂产品,未作封端处理,η?p/c=0.70;PPS为日本东丽产品。两者用双螺杆挤出机在320～350℃制成共混物。仪器为Perkin-Elmer DSC-7型差示扫描量热仪,升温速率10℃/min;DDV-Ⅱ-EA型全自动动态粘弹谱仪和理学D/max-ⅡBX-射线衍射仪。     

硅土/酚酞聚芳醚砜复合材料的制备及性能

使用γ-氨丙基三乙氧基硅烷对硅土进行功能化改性,将功能化的硅土掺入酚酞聚芳醚砜(PES-C)中制备复合材料,并对其热学性能、力学性能及阻隔性能进行表征分析。结果表明,γ-氨丙基三乙氧基硅烷使硅土片层的层间距变大,使硅土处于半剥离状态,且通过溶液共混将表面修饰的片层硅土掺杂于PES-C中更有利于PES-C分子链的插入。所制备的复合材料的T-5%、T-10%和T max分别提升了10.2、10和3.9℃。另外,复合材料的拉伸强度提升8.4 MPa,断裂伸长率提升2.4%,模量提升560.7 MPa。复合材料的氧气渗透系数(P O 2)降低77.4%。     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

 本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_max)、峰高(△C_pmax)和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

酞侧基聚芳醚酮的核磁共振研究(Ⅰ)──链结构及NMR谱的归属

用1D NMR方法研究酞侧基聚芳醚酮(PEK-C)链结构,用二维同核化学位移相关与二维异核化学位移相关实验方法对1D NMR谱峰进行归属,探讨了二维异核远程相关实验在缩聚高分子研究中的应用,为PEK-C修饰机理以及共混相容机理的研究提供重要信息。溶液NMR谱图数据表明,PEK-C具有较规整的链结构。     

几种无定型聚芳醚砜(酮)的成环解聚及产物的开环聚合

几种线性高分子量的无定型聚芳醚砜(酮)在非质子极性溶剂二甲基乙酰胺(DMAc)和二甲基甲酰胺(DMF)中,以氟化铯(CsF)为催化剂进行解聚成环,所得环状低聚物由凝胶渗透色谱(GPC)、高效液相色谱(HPLC)和激光质谱(MALDI-TOF-MS)确认,其中酚酞聚醚砜(PES-C)和酚酞聚醚酮(PEK-C)的解聚成环率分别高达86．3％和87．9％．讨论了影响成环率的各种因素．环状产物又在阴离子引发剂联苯双酚钾的作用下进行开环聚合重新得到高分子量的线性产物．     

Comparative Thermogravimetric Studies of Poly(ether-ketone/sulfone) Imides and Their Parent Polymers: I. Poly(ether-ketone/sulfone) ethylimide

Thermogravimetry (TG) was employed to study the thermal degradation kinetics of poly(etherketone/sulfone)ethylimide (PEK-IE and PES-IE). The corresponding decomposition activation energies and reaction orders were obtained and the comparison was made with their parent polymerspoly(ether-ketone/sulfone) with Cardo group (PEK-C and PES-C). The results show that the degradation activation energies of PEK-IE and PES-IE were lower than that of PEK-C and PES-C; and two stages of the degradation process were found for all the four polymers. For PEK-IE and PES-IE, the activation energies in the first decomposition stage are much lower than that in the second stage and the two stages can be taken as slow induction and fast degradation, whereas for PEK-C and PES-C the activation energies in the first decomposition stage are larger than that in the second stage, and the two stages can both be taken as two fast degradation stages. The decomposition mechanism of the two stages was also speculated.This revised version was published online in November 2005 with corrections to the Cover Date.     

以1,4-二氯甲氧基丁烷为氯甲基化试剂制备线型氯甲基化酚酞聚芳醚砜

采用1,4-二氯甲氧基丁烷（BCMB）为氯甲基化试剂,在Lewis酸ZnO/1,1,2-三氯乙烷的均相反应体系中高效的进行了酚酞聚芳醚砜（PES-C）的氯甲基化,观察了溶剂和催化剂等因素对氯甲基化反应的影响,得到了PES-C氯甲基化的最佳条件。 由1H NMR方法表征了氯甲基化的酚酞聚芳醚砜（CMPES-C）的结构及氯甲基化程度（χCH2Cl-）。 实验结果表明,BCMB完全可以替代氯甲醚,在相似的反应条件下对PES-C树脂进行有效的氯甲基化改性,ZnO/1,1,2-三氯乙烷体系在温和的反应条件下可制得适度的（χCH2Cl-为0.2~0.6）且完全线型结构的CMPES-C。     

酞侧基聚芳醚砜／对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物共混物的研究

The blends of phenolphthalein Polyethersulfone (PES - C ) and a thermotropic liquid crystalline polymer (LCP ) were prepared using melting mixing method.Rheological and mechanical properties of the blends were investigated. It was shown that addition of LCP in PES-C resulted in marked reduction of melt viscosity and improved processibility. The Chadly impact strength of the blend containing 2. 5% LCP increased about 2. 5 times comparing with pure PES-C. The tensile strength, Young's modulus, fie-cural strength and flexural modulus of the PES-C/LCP blends were also improved on some extent. The morphology of these blends were also observed by SEM,and the relationship between the me-chanical properties and the morphology of blends were discussed.     

热致液晶共聚酯／含酚酞侧基聚芳醚砜共混物的流变行为研究

采用溶液共混制备耻不同比例的热致液晶共聚酯／含酚酞侧基聚芳醚砜共混物。利用锥板流变仪对共混体系的熔体流变性能进行了初步研究，测定了熔体粘度－温度、粘度－剪切速度的关系，结果表明该液晶聚合物能明显降低聚芳醚砜的熔体粘度。     

A DSC study of miscibility and phase separation in crystalline polymer blends of phenolphthalein poly(ether ether sulfone) and poly(ethylene oxide)

The miscibility of blends of phenolphthalein poly(ether ether sulfone) (PES-C) and poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. Differential scanning calorimetry (DSC) studies showed that the PES-C/PEO blends prepared by casting from N,N-dimethylformamide (DMF) possessed a single, composition-dependent glass transition temperature (T_g), and thus that PES-C and PEO are miscible in the amorphous state at all compositions at lower temperature. At higher temperature, the blends underwent phase separation, and the PES-C/PEO blend system was found to display a lower critical solution temperature (LCST) behavior. The phase separation process in the blends has also been investigated by using DSC. Annealed at high temperatures, the PES-C/PEO blends exhibited significant changes of thermal properties, such as the enthalpy of crystallization and fusion, temperatures of crystallization and melting, depending on blend composition when phase separation occurred. These changes reflect different characteristics of phase structure in the blends, and were taken as probes to determine phase boundary. From both the thermal analysis and optical microscopy, the phase diagram of the blend system was established. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1383–1392, 1997     

酞侧基聚芳醚砜／对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物共混物的研究

酞侧基聚芳醚砜／对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物共混物的研究李刚，殷敬华，李滨耀（中国科学院长春应用化学研究所，长春，１３００２２）关键词酞侧基聚芳醚砜，热致性液晶高聚物，原位复合材料，对苯二甲酸乙二酯－对羟基苯甲酸嵌段共聚物将热塑性树脂与热...     

热致液晶PEI与PES—C共混物的研究

通过熔融共混,制备不同配比（２．５／９７．５－７５／２５）的ＰＥＩ／ＰＥＳ－Ｃ共混物,使用ＷＡＸＤ、ＤＳＣ、锥板流变仪、力学性能测试、ＳＥＭ等方法对共混物进行了研究。共混后强度、模量均有提高,在高剪切速率下,共混物的粘度有所降低。扫描电镜照片显示,共混物具有“皮芯”结构。     

酞侧基聚芳醚砜／聚苯硫醚共混物的形态与力学性能

酞侧基聚芳醚砜（ＰＥＳ－Ｃ）与聚苯硫醚（ＰＰＳ）具有部分相容性，虽然ＰＰＳ的强度和韧性均低于ＰＥＳ－，但ＰＰＳ含量为２％～１０％的ＰＥＳ－Ｃ／ＰＰＳ共混物在保持ＰＥＳ－Ｃ原有强度，断裂伸长率的同时，模量略增，冲击强度有很大幅度提高，熔融指数亦蛔。