Efficient synthesis of glutaric acid from <Emphasis Type="SmallCaps">l</Emphasis>-glutamic acid via diazoniation/hydrogenation sequence

The practical synthetic preparation of glutaric acid has remained a major challenge to date. In the present study, glutaric acid was synthesised by way of one-pot diazoniation/hydrogenation of the readily available l-glutamic acid under aqueous conditions on a gram-scale with good yields. This is the first example of the deamination of the aliphatic primary amine via diazoniation and could afford a practical approach to the production of glutaric acid.     

Mixtures poly((<Emphasis Type="Italic">R</Emphasis>)-3-hydroxybutyrate) and poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) subjected to DSC

Blends of bacterial poly((R)-3-hydroxybutyrate) (PHB) and poly(l-lactic acid) (PLLA) synthesized by polycondensation of l-lactic acid or by ring-opening polymerization of l-lactide were studied. Miscibility was investigated through both conventional differential scanning calorimetry (DSC) and temperature-modulated DSC (TMDSC). PHB and low-molar mass PLLA were miscible in a whole concentration range, and a single glass transition temperature was observed. On the other hand, PHB/high-molar mass PLLA mixtures phase separate, giving rise to two glass transition temperatures corresponding to PHB and PLLA. A treatment of blends at 190 °C leads to formation of block/multiblock/random copolymers, and blends become miscible.     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Thermal properties of amphiphilic biodegradable triblock copolymer of <Emphasis Type="SmallCaps">l</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide and ethylene glycol

Samples of poly(l,l-lactide)-block-poly(ethylene glycol)-block-poly(l,l-lactide) (PLLA-PEG-PLLA) were synthesized from l,l-lactide polymerization using stannous 2-ethylhexanoate, Sn(Oct)₂ as initiator and di-hydroxy-terminated poly(ethylene glycol) (PEG) (M _n  = 4000 g mol⁻¹) as co-initiator. The chemical linkage between the PEG segment and the PLA segments was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetry analysis (TG) revealed the copolymers composition and was capable to show the deleterious effect of an excess of Sn(Oct)₂ in the polymer thermal stability, while Differential Scanning Calorimetry (DSC) allowed the observation of the miscibility between the PLLA and PEG segments in the different copolymers.     

Optical enzyme sensor for determining <Emphasis Type="SmallCaps">l</Emphasis>-lysine content using <Emphasis Type="SmallCaps">l</Emphasis>-lysine oxidase from the rockfish <Emphasis Type="BoldItalic">Sebastes schlegeli</Emphasis>

l-Lysine (l-Lys) in living bodies is critical for metabolism; therefore, determination of its levels in food is important. Most enzymatic methods for l-Lys analysis are performed using l-lysine oxidase (LyOx), but commercially manufactured LyOx is generally not highly selective for l-Lys among amino acids. We previously isolated LyOx as an antibacterial protein secreted from the skin of the rockfish Sebastes schlegeli. In the present study, we developed an optical enzyme sensor system for rapid and continuous determination of l-Lys using this LyOx. The system comprised an immobilized LyOx membrane, an optical oxygen probe, a flow system, and a personal computer. The amount of l-Lys was detected as a decrease in the oxygen concentration due to the LyOx reaction. The specificity of the sensor was examined against various amino acids. The sensor response was specific for l-Lys. Good reproducibility was obtained in 58 assays. The response of the sensor using commercially prepared LyOx was unstable compared with the response using LyOx isolated in our laboratory. Our sensor system could be used for 5 weeks without our having to change the enzyme membrane. The calibration curve for a standard l-Lys solution was linear from 0.1 to 3.0 mmol L⁻¹. One assay could be completed within 2 min. The sensor was applied to determine the l-Lys content in food samples such as bonito cooking water and scallop hepatopancreas. The values obtained using the sensor and conventional high-performance liquid chromatography methods were well correlated.     

Tyrosine alkyl esters as prodrug: the structure and intermolecular interactions of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine methyl ester compared to <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine and its ethyl and <Emphasis Type="Italic">n</Emphasis>-butyl esters

l-Tyrosine alkyl esters are used as prodrugs for l-tyrosine. Although prodrugs are often designed for their behavior in solution, understanding their solid-state properties is the first step in mastering drug delivery. The crystal structure of l-tyrosine methyl ester has been determined and compared to published structures of l-tyrosine and its ethyl and n-butyl esters. It is almost isostructural with the other esters: it crystallizes in the orthorhombic chiral space group P2₁2₁2₁, a = 5.7634(15) Å, b = 12.111(2) Å, c = 14.3713(19) Å, V = 1003.1(4) Å³ with Z′ = 1. Their main packing motif is a C(9) infinite hydrogen-bond chain, but the conformation of l-tyrosine methyl ester is different from the other two: eclipsed versus U-shaped, respectively. The published structure of the ethyl ester, which was incomplete, has been confirmed by X-ray powder diffraction data. Because l-tyrosine methyl ester is very stable (28 years stored at room temperature), and its hydrolysis rate is relatively low, it should be one of the better prodrugs among the alkyl esters of tyrosine.     

Studies on synthesis and in vitro biodegradability of novel optically active nanostructure poly(ester-imide)s containing <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine and <Emphasis Type="SmallCaps">l</Emphasis>-isoleucine linkages

A series of biodegradable functional amino-acid-based poly(ester-imide)s (PEI)s were designed and synthesized by the direct polycondensation reaction of chiral diacids composed of naturally occurring α-amino acids with 4,4′-thiobis(2-tert-butyl-5-methylphenol) in the presence of tosyl chloride, pyridine, and N,N-dimethylformamide as a condensing agent. These new chiral polymers were characterized with respect to chemical structure and purity using specific rotation experiments, FT-IR, ¹H-NMR, techniques, and elemental analysis. The surface morphology of these polymers was investigated by field emission scanning electron microscopy. The result indicated nanoscale morphology of the obtained polymers. Thermal stability and the weight loss behavior of the resulting PEIs were studied by TGA techniques. All PEIs showed no significant weight loss below 400 °C in a N₂ environment. The monomers and prepared polymers were co-cultivated with airborne fungal spores in culture media to study their biological activity. Soil burial test was also used for evaluation of their biodegradation behavior. The results showed that the synthesized monomers and their derived polymers are biologically active and that their degradation products are probably nontoxic to microbial growth.     

Extracellular Production and Characterization of Two <Emphasis Type="Italic">Streptomyces</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-Asparaginases

l-Asparaginase (ASNase) has proved its use in medical and food industries. Sequence-based screening showed the thermophilic Streptomyces strain Streptomyces thermoluteus subsp. fuscus NBRC 14270 (14270 ASNase) to positive against predicted ASNase primary sequences. The 14270 ASNase gene and four l-asparaginase genes from Streptomyces coelicolor, Streptomyces avermitilis, and Streptomyces griseus (SGR ASNase) were expressed in Streptomyces lividans using a hyperexpression vector: pTONA5a. Among those genes, only 14270 ASNase and SGR ASNase were successful for overexpression and detected in culture supernatants without an artificial signal peptide. Comparison of the two Streptomyces enzymes described above demonstrated that 14270 ASNase was superior to SGR ASNase in terms of optimum temperature, thermal stability, and pH stability.     

Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) networks with tailored water sorption

A poly(l-lactide) diol was obtained through ring opening polymerization of l-lactide, using 1,6 hexanediol and tin(II) 2 ethylhexanoate as a catalyst. In the second step, the poly(l-lactide) macromer (mLA) was obtained by the reaction of poly(l-lactide) diol with methacrylic anhydride. The effective incorporation of the polymerizable end groups was assessed by Fourier transform infrared spectroscopy and nuclear magnetic resonance (¹H NMR). Besides, poly(l-lactide) networks (pmLA) were prepared by photopolymerization of mLA. Further, the macromer was copolymerized with 2-hydroxyethyl acrylate seeking to tailor the hydrophilicity of the system. A set of hydrophilic copolymer networks were obtained. The phase microstructure of the new system and the network architecture was investigated by differential scanning calorimetry, infrared spectroscopy, dynamic mechanical spectroscopy, thermogravimetry, and water sorption studies.     

Thermal analysis on phase behavior of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) interacting with aliphatic polyesters

Abstract  

Thermal behavior, miscibility, and crystalline morphology in blends of low-molecular-weight poly(l-lactic acid) (LM_w-PLLA) or high-molecular-weight PLLA (HM_w-PLLA) with various polyesters such as poly(butylene adipate) (PBA), poly(ethylene adipate) (PEA), poly(trimethylene adipate) (PTA), or poly(ethylene succinate) (PESu), respectively, were explored using differential scanning calorimeter (DSC), and polarized-light optical microscopy (POM). Phase behavior in blends of PLLA with other polyesters has been intriguing and not straight forward. Using a low- and high molecular weight PLLA, this study aimed at mainly using thermal analyses for probing the phase behavior, phase diagrams, and temperature dependence of blends systems composed of PLLA of two different molecular weights (low and high) with a series of aliphatic polyesters of different structures varying in the (CH₂/CO) ratio in main chains. The blends of LM_w-PLLA/PEA and LM_w-PLLA/PTA show miscibility in melt and amorphous glassy states. Meanwhile, the LM_w-PLLA/PESu blend is immiscible with an asymmetry-shaped upper critical solution temperature (UCST) at 220–240 °C depending on the blend composition. In contrast to miscibility in LM_w-PLLA/PTA and LM_w-PLLA/PEA blends, HM_w-PLLA with polyesters are mostly immiscible; and HM_w-PLLA/PTA blend is the only one showing an asymmetry-shaped UCST phase diagram with clarity points at 195–235 °C (depending on composition). Reversibility of UCST behavior, with no chemical transreactions, in these blends was proven by solvent recasting, gel permeation chromatography, and Fourier transform infrared spectroscopy (FT-IR). Crystalline morphology behavior of the LM_w-PLLA/PEA and LM_w-PLLA/PTA blends furnishes addition evidence for miscibility in the amorphous phase between LM_w-PLLA and PTA or PEA.     

Poly(<Emphasis Type="SmallCaps">d,l</Emphasis>-lactic acid) nanoparticle preparation and colloidal characterization

Nano size-ranged poly(d,l-lactic acid) (PLA) particles were obtained from 2 and 10 w% PLA solution in water-saturated ethyl acetate by the emulsification-diffusion method. An increase in the PLA solution concentration resulted in an increase of the particle mean size from ca 260 nm to 530 nm with a broadening of the distribution. After fractionation by centrifugation, the particle mean size was 980 nm. The Pluronic F68 used in the formulations at concentration ranging from 0.5 to 5% w/v, was shown to adsorb at the interface at 0.5 mg/m ² for both particle sizes. The molecular occupied area of 24 nm ²/molecule suggested an expanded conformation of the surfactant at the interface, though an incomplete coverage could not be excluded. Coagulation kinetics measurements revealed a critical coagulation concentration (CCC) of 1.5 M sodium chloride, indicating a steric stabilization of the colloids by the adsorbed triblock copolymer. Nonetheless, variations in zeta potential with increasing salt concentration were observed, suggesting that the surface carboxylate groups were still accessible for further modifications.     

Enthalpy characteristics of dissolution of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine and <Emphasis Type="SmallCaps">l</Emphasis>-asparagine in aqueous solutions of acetonitrile and dimethyl sulfoxide at 298.15 K

The integral enthalpies of dissolution Δ_sol H ^m of l-cysteine and l-asparagine in mixtures of water with acetonitrile and dimethyl sulfoxide at the concentration of organic solvent up to 0.32 molar fractions were measured by means of dissolution calorimetry. The standard enthalpies of dissolution (Δ_sol H°) and transfer (Δ_trans H°) of the amino acids from water to a mixed solvent were calculated. The enthalpy coefficients of pair interactions for L-cysteine and L-asparagine with cosolvent molecules are positive, except for the L-asparagine-water-acetonitrile system. The concepts on the prevailing effect of specific interactions in solutions and the influence of the nature of the cosolvents and lateral substituents of the amino acids on the thermochemical characteristics of dissolution were used to explain the data obtained.     

Coordination polymers based on zinc(<Emphasis Type="SmallCaps">ii</Emphasis>) and manganese(<Emphasis Type="SmallCaps">ii</Emphasis>) with 1,4-cyclohexanedicarboxylic acid

Three new metal-organic coordination polymers were obtained namely, [Mn₃(chdc)₃-(NMP)₂(DMF)₂] (1, chdc^2– is trans-1,4-cyclohexanedicarboxylate, NMP is N-methylpyrrolidone, DMF is N,N-dimethylformamide), [Zn₃(chdc)₃(NMP)₂]?2NMP (2), and [Zn₃(chdc)₃(ur)-(DMF)_0.5]?DMF (3, ur is the urotropine). The crystal structures of polymers 1, 2, and 3 were determined by single-crystal X-ray crystallography. All three compounds were found to contain a trinuclear secondary building unit {M₃(OOC)₆}. Coordination polymers 1 and 2 have a layered structure, while polymer 3 has a three-dimensional coordination framework with isolated pores formed due to the presence of urotropine bridging molecules. Compounds 1 and 3 were characterized by IR spectroscopy, thermogravimetric and elemental analysis data, powder X-ray diffraction. Compound 3 was also characterized by UV-Vis diffuse reflectance spectrum.     

Development of an Amperometric Biosensor Platform for the Combined Determination of <Emphasis Type="SmallCaps">l</Emphasis>-Malic,Fumaric, and <Emphasis Type="SmallCaps">l</Emphasis>-Aspartic Acid

Three amperometric biosensors have been developed for the detection of l-malic acid, fumaric acid, and l -aspartic acid, all based on the combination of a malate-specific dehydrogenase (MDH, EC 1.1.1.37) and diaphorase (DIA, EC 1.8.1.4). The stepwise expansion of the malate platform with the enzymes fumarate hydratase (FH, EC 4.2.1.2) and aspartate ammonia-lyase (ASPA, EC 4.3.1.1) resulted in multi-enzyme reaction cascades and, thus, augmentation of the substrate spectrum of the sensors. Electrochemical measurements were carried out in presence of the cofactor β-nicotinamide adenine dinucleotide (NAD⁺) and the redox mediator hexacyanoferrate (III) (HCFIII). The amperometric detection is mediated by oxidation of hexacyanoferrate (II) (HCFII) at an applied potential of + 0.3 V vs. Ag/AgCl. For each biosensor, optimum working conditions were defined by adjustment of cofactor concentrations, buffer pH, and immobilization procedure. Under these improved conditions, amperometric responses were linear up to 3.0 mM for l-malate and fumarate, respectively, with a corresponding sensitivity of 0.7 μA mM^?1 (l-malate biosensor) and 0.4 μA mM^?1 (fumarate biosensor). The l-aspartate detection system displayed a linear range of 1.0–10.0 mM with a sensitivity of 0.09 μA mM^?1. The sensor characteristics suggest that the developed platform provides a promising method for the detection and differentiation of the three substrates.     

Rapid Determination of <Emphasis Type="SmallCaps">l</Emphasis>-Glutamine using Engineered <Emphasis Type="Italic">Escherichia coli</Emphasis> Overexpressing Glutamine Synthetase

A genetically engineered Escherichia coli was developed as the source of enzyme for rapidly quantifying glutamine. E. coli BL21 (DE3) cells overexpressing a glutamine synthetase from Bacillus subtilis were prepared as tube aliquots and used in a small volume of nontoxic mixture. The current method was compared to high performance liquid chromatography analysis, Sigma kit (GLN-1) and Mecke method. The method is applicable to a wide range of glutamine concentrations (0.05–2.5 mM) and correlates well to the detection results obtained from high performance liquid chromatography (Pearson correlation is 0.978 at the 0.01 level). Moreover, the whole assay procedure takes less than 15 min and uses nontoxic reagents, so it can be applied to monitor glutamine production and utilization conveniently.     

Mechanistic aspects of ligand substitution on <Emphasis Type="Italic">cis</Emphasis>-diaqua(<Emphasis Type="Italic">cis</Emphasis>-1,2-diaminocyclohexane)platinum(II) by Glycine-<Emphasis Type="SmallCaps">l</Emphasis>-Leucine

The kinetics of the interaction of glycine-l-leucine (Glyleu) with cis-[Pt(cis-dach)(OH₂)₂]²⁺ (dach = 1,2-diaminocyclohexane) has been studied spectrophotometrically as a function of [cis-[Pt(cis-dach)(OH₂)₂]²⁺], [Glyleu] and temperature at pH 4.0, where the complex exists predominantly as the diaqua species and Glyleu as a zwitterion. The substitution reaction shows two consecutive steps: the first is the ligand-assisted anation and the second is the chelation step. The activation parameters for both the steps were evaluated using Eyring’s equation. The low ∆H₁^≠ (51.9 ± 2.8 kJmol⁻¹) and large negative value of ∆S₁^≠ (−152 ± 8 JK⁻¹mol⁻¹) as well as ∆H₂^≠ (54.4 ± 1.7 kJmol⁻¹) and ∆S₂^≠ (−162 ± 5 JK⁻¹mol⁻¹) indicate an associative mode of activation for both the aqua ligand substitution processes.     

Ferrocene-containing tri- and tetranuclear cyclic copper(<Emphasis Type="SmallCaps">i</Emphasis>) and silver(<Emphasis Type="SmallCaps">i</Emphasis>) pyrazolates

New tri- and tetranuclear macrocyclic silver(i) and copper(i) 3-ferrocenyl-5-(trifluoromethyl)pyrazolates were prepared: [{(3-((η⁵-C₅H₄)Fe(η⁵-C₅H₅))-5-(CF₃)-Pz}M]₃ (M = Cu (1), Ag (2)) and [{(3-(( η⁵-C₅H₄)Fe(η⁵-C₅H₅))-5-(CF₃)-Pz}Cu]₄ (3). The structures of compounds were established by X-ray diffraction analysis. In the crystalline state, a planar trinuclear silver-containing macrocycliс pyrazolate and a saddle-shaped tetranuclear copper-containing macrocycle are formed. The introduction of a bulky substituent, ferrocene, into the pyrazole ligand results in complete shielding of the acidic metal sites, which precludes the coordination of base molecules.     

New tin(<Emphasis Type="SmallCaps">iv</Emphasis>) <Emphasis Type="Italic">o</Emphasis>-iminosemiquinone complexes

New tin(iv) mono- and bis-o-iminosemiquinone complexes were obtained by the exchange reaction of radical anion lithium salt of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-imino-benzoquinone with tin(iv) organochlorides. The compounds synthesized were characterized by EPR spectroscopy and X-ray diffraction analysis. Substituents on the tin atom were found to affect stability of paramagnetic metal derivatives formed.     

Optimization of Fermentation Conditions for the Biosynthesis of <Emphasis Type="SmallCaps">l</Emphasis>-Threonine by <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the fed-batch fermentation technique was applied to improve the yield of l-threonine produced by Escherichia coli TRFC. Various fermentation substrates and conditions were investigated to identify the optimal carbon source, its concentration and C/N ratio in the production of l-threonine. Sucrose was found to be the optimal initial carbon source and its optimal concentration was determined to be 70 g/L based on the results of fermentations conducted in a 5-L jar fermentor using a series of fed-batch cultures of E. coli TRFC. The effects of glucose concentration and three different feeding methods on the production of l-threonine were also investigated in this work. Our results showed that the production of l-threonine by E. coli was enhanced when glucose concentration varied between 5 and 20 g/L with DO-control pulse fed-batch method. Furthermore, the C/N ratio was a more predominant factor than nitrogen concentration for l-threonine overproduction and the optimal ratio of ammonium sulfate to sucrose (g/g) was 30. Under the optimal conditions, a final l-threonine concentration of 118 g/L was achieved after 38 h with the productivity of 3.1 g/L/h (46% conversion ratio from glucose to threonine).     

Oxovanadium(<Emphasis Type="SmallCaps">iv</Emphasis>) cations in heterometallic and heteroligand complex formation

The formation of heterometallic oxovanadium(iv) diethylenetriaminepentaacetates with titanium(iii), chromium(iii), cobalt(ii), nickel(ii), and manganese(ii) cations in aqueous solutions was studied by spectrophotometry and pH-metry. The stabilizing influence of heterometallic chelation on an unstable oxidation state of Ti ⁱⁱⁱ and the labilizing effect of oxovanadium(iv) cations on the coordination of Cr ⁱⁱⁱ cations by the carboxylate ligand anions in the heterometallic complex were shown. The optimum conditions for the formation of the heterometallic dtpa complexes were selected and their thermodynamic stability was estimated. The states of the oxovanadium(iv) cations in the monoand heteroligand systems involving polyamine, polyaminopolycarboxylate, and alkylpolyphosphonate ligands were studied. Specific features of ligand coordination and formation of the mixed-ligand chelates were investigated. A variety of molecular compositions of complex oxovanadium(iv) oxyethylenediphosphonate particles formed in ranges of pH 2.2—3.0, 4.5—5.5, and 6.3—6.4 was found. The preferability of formation of polynuclear oxovanadium(iv) oxyethylidenediphosphonates, viz., binuclear particles with oxovanadium(iv) cation to ligand molar ratios of 2 : 1 and 2 : 5 and trinuclear particles with a molar ratio of components of 3 : 2, was shown.