Highly Sensitive Fluorescent pH Microsensors Based on the Ratiometric Dye Pyranine Immobilized on Silica Microparticles

Pyranine (HPTS) is a remarkably interesting pH-sensitive dye that has been used for plenty of applications. Its high quantum yield and extremely sensitive ratiometric fluorescence against pH change makes it a very favorable for pH-sensing applications and the development of pH nano-/microsensors. However, its strong negative charge and lack of easily modifiable functional groups makes it difficult to use with charged substrates such as silica. This study reports a methodology for noncovalent HPTS immobilization on silica microparticles that considers the retention of pH sensitivity as well as the long-term stability of the pH microsensors. The study emphasizes the importance of surface charge for governing the sensitivity of the immobilized HPTS dye molecules on silica microparticles. The importance of the immobilization methodology, which preserves the sensitivity and stability of the microsensors, is also assessed.     

A high-precision ratiometric fluorosensor for pH: implementing time-dependent non-linear calibration protocols for drift compensation

We present a versatile time-dependent non-linear calibration protocol for optical sensors, implemented on the pH sensitive ratiometric fluorophore 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) immobilized in ethyl-cellulose. The calibration protocol individually compensated for the progressive drift of calibration parameters, whereby sensor precision and accuracy, as well as applicable lifetime were improved. A severely reduced photoacidity was observed for the immobilized fluorophore, for which excited state dynamics was characterized and benefited from during measurements. Due to the significantly reduced photoacidity of HPTS immobilized in the ethyl-cellulose sensing membrane, a dual excitation/dual emission (F₁, ex/em: 405/440 nm and F₂, ex/em: 465/510 nm) ratiometric (RF₁,F₂ = F₁/F₂) sensing scheme could be used to amplify sensor response. The signal to noise (S/N) ratio was enhanced by ∼400% utilizing the dual excitation/dual emission ratiometric sensing scheme, rather than the more commonly used protocol of dual excitation/single emission for HPTS fluorescence. Apparent pK_a of the fluorophore ranged from 6.74 to 8.50, mainly determined by the immobilization procedure. The repeatability (IUPAC, pooled standard deviation) over three pH values (6.986, 7.702 and 7.828) was 0.0044 pH units for the optical sensor, compared to 0.0046 for the electrode used for standardization. Sensor analytical characteristics were thereby in principle limited by the performance of the standardization procedure.     

Optochemical sensing by immobilizing fluorophore-encapsulating liposomes in sol–gel thin films

The chemical stability of optochemical sensors depends largely on the physiochemical properties of the supportive matrix of the sensor and on the method used to immobilize sensing reagents to the supportive matrix of the sensor. Leaking of physically immobilized sensing reagents from the matrix support decreases the stability of the sensor and its overall usefulness. Covalent immobilization eliminates leakage of the sensing reagent from the support but may lead to alteration of spectral properties and loss of analyte response. This paper presents a new method for physical immobilization of polar fluorescence dyes in a sensing support. The method is based on the immobilization of fluorescent dye encapsulating liposomes in a sol–gel film of micrometer thickness. The encapsulation of the dye molecules in the liposomes effectively increases the molecular dimensions of the sensing reagent, thus preventing its leakage from the matrix support. This paper describes the analytical properties of a pH sensor fabricated by immobilizing carboxyfluorescein-encapsulating liposomes in a sol–gel thin film. The sensor shows excellent stability with respect to dye leaking which in turn leads to high reproducibility and sensitivity of about 0.01 pH units. The linear dynamic range of the sensor is between pH 6 and 7.5 and its response time is at the sub-seconds time scale.     

Electrochemical and Optical Behavior of 8‐Hydroxypyrene‐1,3,6‐trisulfonic Acid at Optically Transparent Electrodes

The objective of this work is to elucidate the electrochemical and corresponding optical properties of 8‐hydroxypyrene‐1,3,6‐trisulfonic acid (HPTS), using optically transparent electrodes, thereby deducing its usefulness as a model compound for spectroelectrochemical sensor development. Three pH levels were tested to determine optimal solution conditions for optical signal modulation. The electrolysis of HPTS follows an ECE mechanism, presumably resulting in the formation of a dihydroxy/dione derivative, and modulates the optical response at 405 and 460 nm wavelengths for pH 5 solutions. HPTS is a good candidate for spectroelectrochemical sensor research.     

Dual‐fluorophore Raspberry‐like Nanohybrids for Ratiometric pH Sensing

We report on the development of raspberry‐like silica structures formed by the adsorption of 8‐hydroxypyrene‐1,3,6‐trisulfonate (HPTS)@silica nanoparticles (NPs) on rhodamine B isothiocyanate (RBTIC)@silica NPs for ratiometric fluorescence‐based pH sensing. To overcome the well‐known problem of dye leaching which occurs during encapsulation of anionic HPTS dye in silica NPs, we utilized a polyelectrolyte‐assisted incorporation of the anionic HPTS. The morphological and optical characterization of the as‐synthesized dye‐doped NPs and the resulting nanohybrids were carried out. The pH‐sensitive dye, HPTS, incorporated in the HPTS‐doped silica NPs provided a pH‐dependent fluorescence response while the RBITC‐doped silica provided the reference signal for ratiometric sensing. We evaluated the effectiveness of the nanohybrids for pH sensing; the ratio of the fluorescence emission intensity at 510 nm and 583 nm at excitation wavelengths of 454 nm and 555 nm, respectively. The results showed a dynamic response in the acidic pH range. With this approach, nanohybrids containing different dyes or receptors could be developed for multifunctioning and multiplexing applications.     

Multilayer sol-gel membranes for optical sensing applications: single layer pH and dual layer CO(2) and NH(3) sensors

Organo-silica sol-gel membranes have been prepared and demonstrated in a single layer format for pH measurement and multiple-layer format for both carbon dioxide and ammonia. The sensors are simple and versatile since the same chemistry and membranes are used for each sensor. The sensors use hydroxypyrenetrisulfonic acid (HPTS) as the indicator immobilized in a base-catalyzed sol-gel containing poly(dimethyl)siloxane, aminopropyltriethoxysilane (APTES) and tetraethylorthosilicate (TEOS). This indicator gel is over coated with a hydrophobic sol-gel to reduce cross reactivity to pH when either CO(2) or NH(3) are examined. The gels are very stable and the sensors retain response up to a 12-month period. Sensors can be stored in buffer or dry without loss of function and have response times to that are comparable to literature values.     

Click‐chemistry of polymersomes on nanoporous polymeric surfaces

A facile click chemistry method of immobilizing surface‐functionalized polymer vesicles on casted polymeric PAN substrates is described. Microporous PAN membranes were subjected to hydrochloric acid hydrolysis to obtain surface carboxylates. The carboxylic groups were activated with EDC/NHS‐solution and were then reacted with propargylamine to introduce alkyne groups for CuAAC reactions. The alkyne functionality of the modified membrane surface was verified by reaction with an azide functional click dye both before and after the immobilization of azide‐functionalized ABA vesicles. The efficient postfunctionalization of the membrane with alkyne allowed quantitative coverage of the membrane surface with a polymersome monolayer, as confirmed by immobilization of polymerzomes loaded with a fluorescent dye. Polymersome monolayers immobilized on alkyne functionalized PAN‐membranes were characterized by cryo‐SEM and monolayers were confirmed by atom force microscopy. These methods opens up new avenues for preparing membrane based filtration and sensor technologies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2032–2039     

基于2,6-吡啶二甲酸聚合膜固定纳米金胶的过氧化氢传感器的研究

构造了一种以2,6-吡啶二甲酸电聚合膜为基底,以共价键合的半胱胺固定的纳米金胶吸附辣根过氧化物酶的过氧化氢生物传感器.在以对苯二酚作介体的条件下,实现电流的多级放大.该传感器与2,6-吡啶二甲酸聚合膜-辣根过氧化物酶修饰的传感器比较,具有更高的稳定性、更低的检测下限.在工作电位-0.1 V条件下,能快速催化还原过氧化氢.在传感器制作中,酶固定方法简单易行,制得的电极可多次重复使用,具有较好的使用价值.     

Direct electrochemistry of glucose oxidase immobilized on a hexagonal mesoporous silica-MCM-41 matrix

The direct electrochemistry of glucose oxidase (GOD) immobilized on a hexagonal mesoporous silica modified glassy carbon electrode was investigated. The adsorbed GOD displayed a pair of redox peaks with a formal potential of -417 mV in 0.1 M pH 6.1 phosphate buffer solution (PBS). The response showed a diffusion-controlled electrode process with a two-electron transfer coupled with a two-proton transfer reaction process. GOD immobilized on a hexagonal mesoporous silica retained its bioactivity and stability. In addition, the immobilized GOD could electrocatalyze the oxidation of glucose to gluconlactone by taking ferrocene monocarboxylic acid (FMCA) as a mediator in N(2) saturated solutions, indicating that the electrode may have the potential application in biosensors to analyze glucose. The sensor could exclude the interference of commonly coexisted uric acid, p-acetaminophenol and ascorbic acid and diagnose diabetes very fast and sensitively. This work demonstrated that the mesoporous silica provided a novel matrix for protein immobilization and the construction of biosensors.     

Esterification Synthesis of Ethyl Oleate in Solvent-Free System Catalyzed by Lipase Membrane from Fermentation Broth

In this study, the immobilized lipase was prepared by fabric membrane adsorption in fermentation broth. The lipase immobilization method in fermentation broth was optimized on broth activity units and pH adjustments. The viscose fermentation broth can be used with a certain percentage of dilution based on the original broth activity units. The fermentation broth can be processed directly without pH adjustment. In addition, the oleic acid ethyl ester production in solvent-free system catalyzed by the immobilized lipase was optimized. The molar ratio of ethanol to oil acid, the enzyme amount, the molecular amount, and the temperature were 1:1, 12% (w/w), 9% (w/w)(based the total amount of reaction mixture), and 30 °C, respectively. Finally, the optimal condition afforded at least 19 reuse numbers with esterification rate above 80% under stepwise addition of ethanol. Due to simple lipase immobilization preparation, acceptable esterification result during long-time batch reactions and lower cost; the whole process was suitable for industrial ethyl oleate production.     

一种简化的重氮化法制备固定化酶的载体合成方法

重氮化法是固定化酶时常用的一种方法。用多孔玻璃等无机物作载体时,一般是先用g-氨丙基三乙氧基硅烷与多孔玻璃等载体反应[1,2],生成烷基胺玻璃,然后与对硝基苯酰氯反应,产物经过还原,生成带有芳胺的衍生物,最后进行重氮化。本文通过烷基胺与对氨基苯甲酸反应,直接生成芳胺的衍生物,比常用的方法缩短了一步。通过在新合成的载体上对木瓜蛋白酶进行固定化,研究了固定化条件对酶活力回收的影响,最适固定化条件如下:pH为7.0,时间为6h,酶量为240mg/g载体,并比较了固定化酶和溶液酶的有关性质,考察了固定化酶的操作稳定性。结果表明,用这种方法合成的载体固定化酶,其对热稳定性、操作稳定性及产率都比较理想。     

Supramolecular Construction of a [16]-Imidazolium Cage via a Quadruple [2+2] Photocycloaddition and Its Selective Fluorescent Recognition of Pyranine (HPTS)

Polyimidazolium-based cages are considered promising materials based on their fascinating properties and potential applications. These three-dimensional functional structures are highly desirable for the recognition of particular guest molecules, however, their synthesis remains challenging. In this work, we have designed and synthesizes a pure [n]-imidazolium (n=16) cage, the hexadecakisimidazolium salt H₁₆- 2 (PF₆)₁₆, from tetragonal octakisimidazolium salt H₈- 1 (PF₆)₈. The synthetic method involves formation of metal-carbene templates, a quadruple photochemical [2+2] cycloaddition reaction and subsequent removal of metal ions. Specifically, the synthesized cage, featuring sixteen imidazolium moieties, demonstrated high efficiency for the selective fluorescent recognition of 8-hydroxy-1,3,6-pyrene trisulfonate (HPTS). The present work not only further develops the metal-carbene template strategy by exploiting a new type of polyimidazolium cage, but also provides encouraging prospects for the design of versatile imidazolium-based functional acceptors.     

Study of cavity size and nature of bridging units on recognition of nucleotides by cyclophanes

We synthesized a few novel cyclophanes CP-1 to CP-4 containing anthracene units linked together through different bridging and spacer groups and have investigated their interactions with various nucleosides and nucleotides. Of these systems, CP-1 and CP-3 showed selectivity for 5'-GTP and 5'-ATP as compared to other nucleotides and nucleosides, whereas negligible selectivity was observed with CP-2 and CP-4. Interestingly, CP-1, CP-2 and CP-3 exhibited significant binding interactions with the fluorescent indicator, 8-hydroxy-1,3,6-pyrene trisulfonate (HPTS), resulting in the formation of non-fluorescent complexes. Titration of these complexes with nucleosides and nucleotides resulted in the displacement of HPTS, leading to the revival of its fluorescence intensity. It was observed that 5'-GTP induced the maximum displacement of HPTS from the complex [CP-1·HPTS] with an overall fluorescence enhancement of ca. 150-fold, while 5'-ATP induced ca. 45-fold. Although the displacement of HPTS from the complexes [CP-2·HPTS] and [CP-3·HPTS] was found to be similar to that of [CP-1·HPTS], these complexes showed lesser selectivity and sensitivity. In contrast, negligible displacement of HPTS was observed from the complex [CP-4·HPTS] under similar conditions. These results indicate that CP-1, having a well-defined cavity and good electron acceptor (viologen), is capable of forming selective and stable complexes. Though CP-2 and CP-3 retain the good electron acceptor (viologen), their reduced aromatic surface and larger cavity, respectively, resulted in lesser sensitivity. In contrast, CP-4 having a large cavity and a poor acceptor (1,2-bis(pyridin-4-yl)ethene) showed negligible selectivity, thereby indicating the importance of cavity size, bridging unit and aromatic surface on biomolecular recognition properties of cyclophanes.     

An imaging pH optode for cell studies based on covalent attachment of 8-hydroxypyrene-1,3,6-trisulfonate to amino cellulose acetate films

The objective of this study was to create a thin film optode for fast pH measurements that meets the requirements for imaging pH-responses from cells as well as for a future hybrid design for detection of multiple analytes simultaneously. The sensor is based on the covalent attachment of 8-hydroxypyrene-1,3,6-trisulfonate (HPTS) to a film forming cellulose acetate material through a sulfonamide linkage. The synthesis routes of the cellulose material and regio-specific covalent attachment of the dye are described in detail. The sensor was sterilized in two different ways and showed excellent biocompatibility with Chinese hamster ovary cells. Imprints from cells and μm thin cell extensions were visualized when altering pH of the surrounding solution. The sensor was tested together with time-dependent sigmoidal calibrations giving pH determinations with an exceptional precision and accuracy during measurement within pH 6-8. The precision of the optode, calculated as pooled S.D. (n = 8) according to IUPAC recommendations between pH 6.641 and 7.742 was 0.0029. The accuracy was significantly better than the electrode used as reference during the measurements. The response time (0-95%) was 100 s between pH 6.641 and 7.742 and the reverse response (95-0%) was 80 s. The sensor shows great potential for extra-cellular pH determination over time during cell growth and pharmacological exposure.     

Visible fluorescence spectrometry using second harmonic emission self-induced in semiconductor laser as a light source

Second harmonic emission (416 or 453 nm) self-induced in a nearinfrared semiconductor laser (832 or 906 nm) is used as a light source for excitation of the fluorescent molecules which have absorption bands in the visible region. The conversion efficiency from fundamental to second harmonic emission is 1.7 × 10^–11 (0.5 pW) for a continuous wave (CW) laser, when it is operated at 30 mW. This value is further improved for a pulsed laser operated at a peak power of 10 W. Perylene is used as a standard sample for construction of an analytical curve. The detection limit is 10^–6 M for CW laser excitation. The present fluorimetric system is used for measurements of pH dependence of the fluorescence intensity for 8-hydroxy-1,3,6-pyrenetrisulfonic acid (HPTS). Neutralization titration is demonstrated by using HPTS as a pH indicator.     

Direct introduction of amine groups into cellulosic paper for covalent immobilization of tyrosinase: support characterization and enzyme properties

Tyrosinase is used to eliminate phenolic compounds from wastewater. Therefore, its immobilization is important to enhance catalytic efficiency. Papery materials are of particular interest for use as support for enzyme immobilization since the porous microstructure of fiber networks in papers can provide a suitable reaction environment, especially in flow-type catalytic reactions. However, immobilization of protein onto papery structure needs chemical modifications in severe conditions. To overcome this challenge, a cellulosic paper was directly amine-functionalized in moderate conditions and used for tyrosinase immobilization. The support was pretreated with HCl (0.5 N) solution and then sequentially immersed in ethylenediamine (EDA), glutaraldehyde solution (2% v/v) and the crude enzyme. In comparison with the untreated one, the immobilized enzyme on the EDA-treated support offered a 3.7-fold increase in activity. The FTIR spectra as well as EDX analysis proved the presence of amine groups in the cellulosic paper and also covalent immobilization of tyrosinase on the modified support. When considering the effect of pH on the activity at 25 °C, a maximum relative activity of 134% at pH 6 was revealed. Similarly, evaluating the effect of temperature on the activity at pH 7 displayed a maximum relative activity of 152% at 35 °C. The immobilized enzyme was suitable for use for more than four cycles to degrade a phenolic compound at severe pH and temperature conditions. Additionally, the immobilized enzyme was active after treatment of the surface at different pHs and temperatures for 105 min. The chemically modified cellulosic paper can be used as a support for enzyme immobilization.     

固定化过氧化氢酶的制备及其抗氧化作用

以烟用醋酸纤维的生物化学改性为目标,研究了以壳聚糖为载体时,吸附交联固定化过氧化氢酶的条件,并考察了固定化酶的性质。结果表明,固定化的最佳条件为:加酶量(酶活2×104C IU/m l)6m l,3%壳聚糖20m l,乙二醛浓度6%(w/v),交联剂用量100m l,吸附时间0.5 h,交联时间2.5h,酶活收率可达42.9%。过氧化氢酶固定化后,动学参数Km值为61.7mmol/L;对活性氧具有较好清除作用。     

Use of reversible denaturation for adsorptive immobilization of urease

Urease was chosen as a model multimeric protein to investigate the utility of reversible denaturation for immobilization to a hydrophobic support. Of the various procedures investigated, acidic denaturation provided the highest degree of immobilization and enzymatic activity with lowering of K _m (apparent). Exposure of hydrophobic clusters in the protein molecule induced by the acidic pH environment was confirmed by fluorescence studies using 8-anilino-1-naphtalene-sulfonate as a hydrophobic-reporter probe. The catalytic potential of the enzyme at low pH values was dramatically improved with significant heat and pH stability enhancement on immobilization. Furthermore, the immobilized preparation was used successfully in continuous catalytic transformations. Based on the results presented in this article and a recent report involving a relatively more simple monomeric protein, it is suggested that reversible denaturation may be of general utility for immobilization of proteins, which are not normally adsorbed on hydrophobic supports.     

Ratiometric sensing of CO2 in ionic liquid modified ethyl cellulose matrix

In this study emission-based ratiometric response of ion pair form of 1-hydroxy-3,6,8-pyrenetrisulfonate (HPTS) to gaseous CO(2) has been evaluated in ionic liquid (IL) containing ethyl cellulose (EC) matrix. The ionic liquid: 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF(4)); provided longer storage time and highly stable microenvironment for the HPTS molecule due to the buffering effect. The utilization of ionic liquid in ethyl cellulose matrix resulted with superior spectral characteristics. The excitation spectra of HPTS exhibited an atypical isoemmissive point in modified EC matrix at 418 nm which allows ratiometric processing of the signal intensities. EMIMBF(4)-doped sensor films exhibited enhanced linear working range between 0 and 100% pCO(2). The signal changes were fully reversible and the shelf life of the EMIMBF(4)-doped films was extended from 15 to 95 days.     

RAPID DETERMINA TION OF L—GLUTAMIC ACID WITH AN ENZYME REACTOR OFL—GLUTAMIC DECARBOXYLASE IMMOBILIZED ON ION EXCHANGE RESIN

The preparation and characterization of an immobilized L-glutamic decarboxylase(GDC) were studied.This work is to develop a sensitive method for the determination of L-glutamate using a new biosensor,which consists of an enzyme column reactor of GDC immobilized on a novel ion exchange resin(carboxymethyl-copolymer of allyl dextran and N.N‘-methylene-bisacrylamide CM-CADB) and ion analyzer coupled with a CO2 electrode.The conditions for the enzyme immobilization were optimized by the parameters:buffer composition and concentration,adsorption equilibration time,amount of enzyme,temperature,ionic strength and pH.The properties of the immobilized enzyme on CM-CADB were studied by investigating the initial ate of the enzyme reaction,the effect of various parameters on the immobilized GDC activity and its stability.An immobilized GDC enzyme column reactor matched with a flow injection system-ion analyzer coupled with CO2 electrode-data collection system made up the original form of the apparatus of biosensor for determining of L-glutamate acid.The limit of detection is 1.0×10^-5M.The linearity response is in the range of 5×10^-2-5×10^-5M.The equation of linear regression of the calibration curve is y=43.3x+181.6(y is the milli-volt of electrical potential response,x is the logarithm of the concentration of the substrate of L-glutamate acid).The correlation coefficient equals 0.99.The coefficient of varioation equals 2.7%.