聚乙烯醇非均相法环氧乙烷衍生化反应的研究

 采用聚乙烯醇与环氧乙烷非均相加合反应合成了不同环氧乙烷结合量的羟乙基化聚乙烯醇（ＨＥＰＶＡ）．在通过１３Ｃ－ＮＭＲ和ＩＲ对产物进行表征的基础上，讨论了反应与ＰＶＡ空间立构性及结晶性间的关系，证明了ＨＥＰＶＡ中聚氧乙烯链的存在，且其含量增长速率随反应深度的增加而增大．     

高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能。发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶．当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶进入ＨＤＰＥ晶相。形成与ＬＤＰＥ在片晶水平上的共晶。     

极低密度聚乙烯与其它聚乙烯的共混

从结构角度，用ＤＳＣ，ＷＡＸＤ，ＳＡＸＳ研究了聚乙烯（ＰＥ）家族中极低密度聚乙烯（ＶＬＤＰＥ）与其它ＰＥ的互容性．ＨＤＰＥ／ＶＬＤＰＥ是共晶互容的，以其大量无规部分“溶解”了ＨＤＰＥ的结晶缺陷部分，提高了ＨＤＰＥ的Ｔｃ，Ｔｍ，Ｘｃ，结晶峰半高宽变窄，晶胞参数随组成而有最低值．ＶＬＤＰＥ与ＬＬＤＰＥ结构极为相似，ＤＳＣ及ＷＡＸＤ证明其共混物是共晶相容体系．ＬＤＰＥ／ＶＬＤＰＥ的结晶度符合按组成的计算值，但晶胞参数ａ，ｂ以及晶粒尺寸增大，ＤＳＣ上有分别相应于两组份的两个Ｔｍ；ＶＬＤＰＥ的Ｔｃ，Ｔｍ峰高之和高于按组份的计算值，ＬＤＰＥ的Ｔｍ，Ｔｃ则低于计算值．认为是正如ＬＬＤＰＥ／ＬＤＰＥ，ＬＤＰＥ向充满整个体积的ＶＬＤＰＥ中不断填入，以ＶＬＤＰＥ为晶核而结晶，形成相分离的不相容体系．     

聚环氧乙烷为支链的两亲共聚物的表征及性能

用端基带有甲基丙烯酸酯的聚环氧乙烷大分子单体（ＰＥＯ—ＭＡ）分别与小分子单体苯乙烯（Ｓ）、甲基丙烯酸甲酯（ＭＭＡ）、丙烯酸甲酯（ＭＡ）溶液自由基共聚合得到了三种具有不同主链结构的以聚环氧乙烷（ＰＥＯ）为支链的两亲接枝嵌段共聚物（分别简写为：ＰＳ─ｇ─ＰＥＯ，ＰＭＭＡ─ｇ─ＰＥＯ，ＰＭＡ─ｇ─ＰＥＯ）．用ＧＰＣ、ＩＲ、１Ｈ─ＮＭＲ、ＷＡＸＤ和ＤＳＣ对其结构进行了表征．研究了接校共聚物的结晶性能、乳化性能以及在Ｗｉｌｌｉａｍｓｏｎ反应中相转移催化作用．结果表明，不同主链结构有不同的结晶度，并随支链ＰＥＯ含量的增加，分子量的增大而提高；其乳化体积和相转移催化反应的转化率均随着共聚物浓度的增加、支链ＰＥＯ含量的增人而增大，随支链ＰＥＯ分子量的提高而减小．     

高密度聚乙烯／低密度聚乙烯／乙烯—醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能，发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶，当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶入进ＨＤＰＥ晶相，形成与ＬＤＰＥ在片晶水平上的共晶。     

聚乙烯醇－g－聚丙烯酸膜用于渗透气化法分离乙醇－水的研究

合成了聚乙烯醇－ｇ－聚丙烯酸接枝聚合物（ＰＶＡ－ｇ－ＰＡＡ），分别用ＫＯＨ、ＮａＯＨ、ＬｉＣｌ的乙醇－水溶液处理ＰＶＡ－ｇ－ＰＡＡ膜。发现离子膜用于乙醇－水的渗透气化分离可以大幅度提高分离系数，特别是用ＫＯＨ处理，分离系数可达４００。     

Cl_q—VT免疫吸附剂制备及其吸附循环免疫复合物性能初探

本文在最佳条件下将猪Ｃｌｑ与活化的ＶＴ树脂反应制备了Ｃｌｑ－ＶＴ免疫吸附剂，每克干重ＶＴ可结合０．５ｍｇＣｌｑ，可吸附１．４ｍｇ热凝聚人ＩｇＧ（ＡＨＧ）。ＳＤＳ—ＰＡＧＥ结果表明Ｃｌｑ－ＶＴ免疫吸附剂只对ＡＨＧ特鼻吸附，而不吸附其它血清蛋白。应用Ｃｌｑ－ＶＴ免疫吸附剂吸附ＳＬＥ病人血浆中循环免疫复合物（ＣＩＣ），结果表明约有５２％的ＣＩＣ被清除。Ｃｌｑ－ＶＴ免疫吸附剂只能一次性地使用。     

以交联聚乙烯醇为载体的离子交换剂对蛋白质的分离性能

本文对阴离子交换剂ＤＥＡ—ＰＶＴ常压液相离子交换色谱分离蛋白质的性能、分离条件进行了探讨。结果表明其对蛋白质的分离性能良好，容易洗脱。与载体交联聚乙烯醇相比，ＤＥＡ—ＰＶＴ对蛋白质的非特异性吸附明显降低。     

C1q—VT免疫吸附剂制备及其吸附循环免疫复合物性能初探

本文在最佳条件下将猪Ｃ１ｑ与活化的ＶＴ树脂反应制备了Ｃ１ｑ－ＶＴ免疫吸附剂，每克干重ＶＴ可结合０．５ｍｇＣ１ｑ，可吸附１．４ｍｇ热凝聚人ＩｇＧ（ＡＨＧ）。ＳＤＳ－ＰＡＧＥ结果表明Ｃ１ｑ－ＶＴ免疫吸附剂只对ＡＨＧ特异吸附，而不吸附其它血清蛋白。应用Ｃ１ｑ－ＶＴ免疫吸附剂吸附ＳＬＥ病人血浆中循环免疫复合物（ＣＩＣ），结果表明约有５２％的ＣＩＣ被清除。Ｃ１ｑ－ＶＴ免疫吸附剂只能一次性地使用．     

As-V-O簇合物对乙苯选择氧化反应的催化活性

通过水热方法合成了簇合物［Ｎ（ＣＨ３）４］４［Ａｓ８Ｖ１４Ｏ４２（８Ｈ２Ｏ）］及其相近的同多及杂多钒氧簇Ｋ６Ｖ１０Ｏ２８·９Ｈ２Ｏ，ＮａＫＶ２Ｏ６，（Ｈ２Ｅｎ）０．５Ｖ２Ｏ５，（Ｈ２Ｅｎ）３（ＶＯ）９（ＰＯ４）８，Ｎａ３ＶＯ（ＨＰＯ４）（ＰＯ４）·Ｈ２Ｏ．运用ＸＲＤ和ＩＲ等手段表征了［Ｎ（ＣＨ３）４］４［Ａｓ８Ｖ１４Ｏ４２（８Ｈ２Ｏ）］的结构．该类化合物对于催化乙苯过氧化氢选择氧化制苯乙酮具有较高的催化活性．通过比较含钒与不含钒化合物的活性情况，讨论了催化氧化的活性中心．     

燃料电池用聚乙烯醇基碱性聚合物电解质膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇(PVA)、聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)和聚乙烯醇/聚乙二醇二甲醚(PVA/PEGDE)碱性聚合物电解质膜详细考察了膜的外观形貌、微观结构、热稳定性、离子电导率和化学稳定性等.结果表明,PVA与PVP以及PEGDE具有很好的相容性,所制备的复合膜断面致密...     

Thermal degradation of copolymers from vinyl acetate and vinyl alcohol

The thermal degradation of poly(vinyl acetate) (PVA), poly(vinyl alcohol) (PVAL), vinyl acetate-vinyl alcohol (VAVAL), vinyl acetate-vinyl-3,5-dinitrobenzoate (VAVDNB) and vinyl alcohol-3,5-dinitrobenzoate (VALVDNB) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that PVA and PVAL are thermally more stable than VAVAL copolymers, being PVAL the most stable polymer. The presence of small amounts of vinyl-3,5-dinitrobenzoate (VDNB) in PVA or PVAL produces a marked decrease in the thermal stability of both homopolymers, being VALVDNB copolymers the less stable materials. The apparent activation energy of the degradative process was determined by the Kissinger and Flynn-Wall methods which agree well.     

Immobilization of oligonucleotides on crosslinked poly(vinyl alcohol) for application in DNA chips

In biotechnological applications there is an enormeous growth in the development of new miniaturized devices to reduce timescales, cost and amounts of reagents and starting materials. DNA chips represent miniaturized analytical tools that allow the simultaneous detection of different targets for high throughput screening. They consist of a small size support on which DNA probes are in-situ synthezised or immobilized. We present protocols for the effective immobilization of pre-synthezised 16S rRNA oligonucleotides on crosslinked poly(vinyl alcohol) (PVA). The polymeric gel consists of poly(vinyl alcohol) (PVA) crosslinked with poly(allylamin chloride) (PALAM) and monochlortriazinyl-beta-cyclodextrin (beta-CD) at pH 4,6.8,8 and 9. Mechanical characterization of the gels show that the immobilization capacity increases with increasing pH and increasing crosslinking within the gel. We will demonstrate that the hybridization efficiency on PVA chips is superior over commercially available chips based on nylon, nitrocellulose and aminoalkylsilane.     

New chitin-based polymer hybrids, 1. Miscibility of poly(vinyl alcohol) with chitin derivatives

As a new class of biopolymer-based hybrid materials, the present paper describes the binary blends of a modified chitin and poly(vinyl alcohol) (PVA) which are miscible in the whole range of compositions. The blend films were prepared by the solvent cast method from a homogeneous aqueous solution of PVA and a chitin derivative having poly(2-methyl-2-oxazoline) side chains. Miscibility between PVA and poly(2-methyl-2-oxazoline) homopolymer was also revealed. Differential scanning calorimetry and FT-IR analyses were used to investigate the blends.     

Surface Properties of Poly(vinyl alcohol) with Iron(III)chloride Before and After UV-Irradiation

Summary: Surface properties of poly(vinyl alcohol) (PVA) with low content of FeCl₃ (1, 5 wt.%) were studied by measurements of contact angles and atomic force microscopy. The results of contact angles and the surface free energy calculations revealed that the hydrophilicity of the surface of PVA films depended on the content of iron (III) chloride in these polymeric films. Introduced salt also affected photochemical reactions in poly(vinyl alcohol). Photooxidation of PVA was more effective in the presence of FeCl₃ because of formation of reactive chlorine atoms, which were capable of initiating new reactions. Also the morphology and roughness parameters of PVA film changed when iron (III) chloride was added.     

Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

Actuator based on MWNT/PVA hydrogels

The first actuator based on multiwalled carbon nanotube (MWNT) hydrogels was developed through simple hydrogelation with poly(vinyl alcohol) (PVA). This actuator exhibited excellent actuating properties compared with the corresponding actuator based on poly(acrylic acid)/PVA hydrogels.     

Evolution of aromatic compounds in the thermal decomposition of vinyl polymers

The thermal decomposition products that evolve from poly(vinyl chloride) (PVC), poly(vinylbromide) (PVB), poly(vinyl alcohol) (PVA), and poly(vinylacetate) (PVAc) were analyzed by direct pyrolysis in the ion source of a mass spectrometer (MS). Our results indicate that in both stages of the decomposition process which occurred in the four vinyl polymers investigated several aromatic hydrocarbons were produced and that the relative amounts of benzene, napthalene, and anthracene were different in the two stages. This previously unreported information determines in a single scheme the thermal behavior of the title compounds.     

用UV-Vis法研究聚乙烯醇水溶液的透明度

用紫外可见分光光度计(UV-vis)测试了聚乙烯醇(PVA)水溶液和盐溶液的透明度,研究了PVA醇解度、电解质和温度对PVA溶液透明度的影响.实验结果表明,UV-Vis法是一种简便可行的测定PVA溶液透明度的方法.