Metal‐containing polymer hydrogels have attracted increasing interest in recent years due to their outstanding properties such as biocompatibility, recoverability, self‐healing, and/or redox activity. In this short review, methods for the preparation of metal‐containing polymer hydrogels are introduced and an overview of these hydrogels with various functionalities is given. It is hoped that this short update can stimulate innovative ideas to promote the research of metal‐containing hydrogels in the communities.
In this study, a new type of functional, self‐assembled nanostructure formed from porphyrins and polyamidoamine dendrimers based on hydrogen bonding in an aqueous solution is presented. As the aggregates formed are promising candidates for solar‐energy conversion, their photocatalytic activity is tested using the model reaction of methyl viologen reduction. The self‐assembled structures show significantly increased activity as compared to unassociated porphyrins. Details of interaction forces driving the supramolecular structure formation and regulating catalytic efficiency are fundamentally discussed.
Novel supramolecular phosphorescent polymers (SPPs) are synthesized as a new class of solution‐processable electroluminescent emitters. The formation of these SPPs takes advantage of the efficient non‐bonding assembly between bis(dibenzo‐24‐crown‐8)‐functionalized iridium complex monomer and bis(dibenzylammonium)‐tethered co‐monomer, which is monitored by 1H NMR spectroscopy and viscosity measurements. These SPPs show good film morphology and an intrinsic glass transition with a Tg of 94–116 °C. Noticeably, they are highly photoluminescent in solid state with quantum efficiency up to ca. 78%. The photophysical and electroluminescent properties are strongly dependent on the molecular structures of the iridium complex monomers.
To overcome drug delivery issues associated with its short half‐life in vivo, p‐coumaric acid (pCA), a naturally occurring bioactive, has been chemically incorporated into a poly(anhydride‐ester) backbone through solution polymerization. Nuclear magnetic resonance and Fourier transform infrared spectroscopies indicated that pCA was successfully incorporated without noticeable alterations in structural integrity. The polymer's weight‐average molecular weight and thermal properties were determined, exhibiting a molecular weight of over 26 000 Da and a glass transition temperature of 57 °C. In addition, in vitro hydrolytic release studies demonstrated pCA release over 30 d with maintained antioxidant activity, demonstrating the polymer's potential as a controlled release system.
The controlled synthesis of poly(oligo(2‐ethyl‐2‐oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)‐mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well‐defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α‐aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site‐specifically conjugated, via reductive amination, to a dipeptide (NH2‐Gly‐Tyr‐COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.
Novel thermosensitive nanocomposite (NC) hydrogels consisting of organic/inorganic networks are prepared via in situ free radical polymerization of 2‐(2‐methoxyethoxy) ethyl methacrylate (MEO2MA) and oligo(ethylene glycol) methacrylate (OEGMA) in the presence of inorganic cross‐linker clay in aqueous solution. The obtained clay/P(MEO2MA‐co‐OEGMA) hydrogels exhibit double volume phase transition temperatures, an upper critical solution temperature (UCST), and a lower critical solution temperature (LCST), which can be controlled between 5 and 85 °C by varying the fraction of OEGMA units and the weight percentage of cross‐linker clay. These new types of NC hydrogels with excellent reversible thermosensitivity are promising for temperature‐sensitive applications such as smart optical switches.
Understanding nanoscale structural hierarchy/complexity of hydrophilic flexible polymers is imperative because it can be viewed as an analogue to protein‐alike superstructures. However, current understanding is still in infancy. Herein the first demonstration of nanoscale structural hierarchy/complexity via copper chelation–induced self‐assembly (CCISA) is presented. Hierarchically‐ordered colloidal networks and disks can be achieved by deliberate control of spacer length and solution pH. Dynamic light scattering, transmission electron microscopy, and atomic force microscopy demonstrate that CCISA underwent supramolecular‐to‐supracolloidal stepwise‐growth mechanism, and underline amazing prospects to the hierarchically‐ordered superstructures of hydrophilic flexible polymers in water.
Herein, it is demonstrated that star pseudopolyrotaxanes (star‐pPRs) obtained from the inclusion complexation of α‐cyclodextrin (CD) and four‐branched star poly(ε‐caprolactone) (star‐PCL) organize into nanoplatelets in dimethyl sulfoxide at 35 °C. This peculiar property, not observed for linear pseudopolyrotaxanes, allows the processing of star‐pPRs while preserving their supramolecular assembly. Thus, original PCL:star‐pPR core:shell nanofibers are elaborated by coaxial electrospinning. The star‐pPR shell ensures the presence of available CD hydroxyl functions on the fiber surface allowing its postfunctionalization. As proof of concept, fluorescein isothiocyanate is grafted. Moreover, the morphology of the fibers is maintained due to the star‐pPR shell that acts as a shield, preventing the fiber dissolution during chemical modification. The proposed strategy is simple and avoids the synthesis of polyrotaxanes, i.e., pPR end‐capping to prevent the CD dethreading. As PCL is widely used for biomedical applications, this strategy paves the way for simple functionalization with any bioactive molecules.
A simple and effective airflow method to prepare sandwich‐type block copolymer films is reported. The films are composed of three layers: vertically oriented nanocylinders align in both upper and bottom layers and irregular nanocylinders exist in the bulk of the film. The vertically oriented nanocylinders in both sides can provide high accessibility to ions and ensures the exchange of chemical species between the membrane and external environment, while the irregularly oriented nanocylinders in the middle part of the film can prolong the pathway of ions transportation and enhance ions selectivity.
A novel diblock copolymer consisting of poly(vinylferrocene) (PVFc) and poly(N,N‐diethylacrylamide) (PDEA) is synthesized via a combination of anionic and RAFT polymerization. The use of a novel route to hydroxyl‐end‐functionalized metallopolymers in anionic polymerization and subsequent esterification with a RAFT agent leads to a PVFc macro‐CTA ( = 3800 g mol−1; Đ = 1.17). RAFT polymerization with DEA affords block copolymers as evidenced by 1H NMR spectroscopy as well as size exclusion chromatography (6400 ≤ ≤ 33700 g mol−1; 1.31 ≤ Đ 1.28). Self‐assembly of the amphiphilic block copolymers in aqueous solution leads to micelles as shown via TEM. Importantly, the distinct thermo‐responsive and redox‐responsive character of the blocks is probed via dynamic light scattering and found to be individually and repeatedly addressable.
High molecular weight cyclic poly(ε‐caprolactone)s (cPCLs) with variable ring size are synthesized via light‐induced ring closure of α,ω‐anthracene‐terminated PCL (An‐PCL‐An). The ring size of cPCL is tunable simply by adjusting the polymer concentration from 10 to 100 mg mL−1 in THF. The cycloaddition via the bimolecular cyclization of An‐PC‐An is well characterized by a variety of analyses such as 1H NMR and UV–vis spectroscopies, gel‐permeation chromatography, and differential scanning calorimetry. The reversible dimerization of An induced by heating enables the cyclic PCL to have a switchable “on–off” capability. This novel light‐induced ring‐closure technique can be one of the most powerful candidates for producing various well‐defined cyclic polymers in highly concentrated polymer solution.
A switch from carbanions to aza‐anions is performed by the addition of N‐tosylaziridine (TAz) to living poly(styryl) (PS) chains. This is the first example of carbanionic aziridine ring‐opening which was previously activated by amidation with a tosyl group to enable nucleophilic ring‐opening by the living chain end. Poly(styrene)‐tosylaziridines (PS‐TAz) with narrow molecular weight distributions and variable molecular weights are synthesized. The removal of the tosyl group and subsequent functionalization is shown, evidencing quantitative transfer to azaanionic species. All polymers are characterized in detail by 1H NMR spectroscopy, DOSY 1H NMR spectroscopy, and size exclusion chromatography (SEC). This strategy allows the introduction of amine groups via anionic polymerization in analogy to the well‐established epoxide termination.
3,6‐Connected cyclohexadienes as precursors for polyphenylenes are synthesized and characterized by mass spectrometry and NMR spectroscopy. Pure fractions of trimers, hexamers, and nonamers are collected after separation of the product mixture by recycling GPC. The anticipated formation of rigid linear structures, due to the trans‐configuration of the monomeric units, is supported by density functional theory and experimentally confirmed by dynamic light scattering from dilute solution at low scattering angles. The obtained translational diffusion coefficients are represented by rigid rod‐like or prolate ellipsoid‐like molecular shapes. The measurements of diffusion coefficients reveal a length‐dependent ratio of 1:2:3 between the three oligomers, which directly correlates to the expected length extension from trimer to nonamer.
Temperature‐triggered switchable nanofibrous membranes are successfully fabricated from a mixture of cellulose acetate (CA) and poly(N‐isopropylacrylamide) (PNIPAM) by employing a single‐step direct electrospinning process. These hybrid CA‐PNIPAM membranes demonstrate the ability to switch between two wetting states viz. superhydrophilic to highly hydrophobic states upon increasing the temperature. At room temperature (23 °C) CA‐PNIPAM nanofibrous membranes exhibit superhydrophilicity, while at elevated temperature (40 °C) the membranes demonstrate hydrophobicity with a static water contact angle greater than 130°. Furthermore, the results here demonstrate that the degree of hydrophobicity of the membranes can be controlled by adjusting the ratio of PNIPAM in the CA‐PNIPAM mixture.
Monolithic aerogels can be easily obtained by drying physical gels formed by linear uncross‐linked polymers. Preparation methods, structure, and properties of these physically cross‐linked polymeric aerogels are reviewed, with particular emphasis to those whose cross‐linking knots are crystallites and, more in particular, crystallites exhibiting nanoporous‐crystalline forms. The latter aerogels present beside disordered amorphous micropores (typical of all aerogels) also all identical nanopores of the crystalline phases. Their outstanding guest transport properties combined with low material cost, robustness, durability, and ease of handling and recycle make these aerogels suitable for applications in chemical separations, purification, and storage as well as in biomedicine. Scientific, technological, and industrial perspectives for monolithic nanoporous‐crystalline polymeric aerogels are also discussed.
Organic electrochromic materials change color rapidly under applied potential. A butterfly‐shaped compound, 5,5′,‐5″,‐5′″‐(thieno[3,2‐b]thiophene‐2,3,5,6‐tetrayl) tetrakis‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxine) (t‐EDOT‐TT) is synthesized for the first time and polymerized at different potentials via electropolymerization technique. By applying different polymerization potentials, the optical and electrochromic properties of this newly synthesized polymer can be tuned. Owing to the dependence of functional group position in the polymer structure on the redox potential, this polymer can be utilized in very interesting organic optoelectronic applications.
The strong adhesion ability of mussel foot‐byssal proteins (Mfps) has inspired scientists to develop novel materials for strong and reversible adhesion, coating, antifouling, and many other applications. However, in many cases, the high costs and the tedious preparation steps of such bioinspired materials hamper the process to push them into practical application. Here a simple but effective way (one step) is presented to synthesize a mussel‐inspired glue from two cheap commercially available materials: polyvinyl alcohol (PVA) and 3,4‐dihydroxybenzaldehyde (DBA). This bioinspired hot curing adhesive exhibits a strong bonding ability as high as 17.3 MPa on stainless steel surfaces, which surpasses most of the commercially available adhesives.
Polysiloxane‐modified tetraphenylethene (PTPESi) is successfully synthesized by attaching tetraphenylethene (TPE) units onto methylvinyldiethoxylsiloxane and subsequent polycondensation. Introducing polysiloxane into TPE has minimal effect on the photophysical properties and aggregation‐induced emission behavior of TPE. The highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energy levels of PTPESi are located mainly on the tetraphenylethene moieties. The fluorescence intensity and the half width of the emission peak of PTPESi before and after annealing at 120 °C for 12 h are nearly the same, indicating high thermal stability and morphological stability. In addition, use of PTPESi film as a sensor toward the vapor‐phase detection of explosives is also studied and it displays quite high fluorescence quenching efficiency and good reversibility.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
Improving thermal stability of TEMPO‐oxidized cellulose nanofibrils (TOCNs) is a major challenge for the development and preparation of new nanocomposites. However, thermal degradation of TOCNs occurs at 220 °C. The present study reports a simple way to improve thermal stability of TOCNs by the heat‐induced conversion of ionic bonds to amide bonds. Coupling amine‐terminated polyethylene glycol to the TOCNs is performed through ionic bond formation. Films are produced from the dispersions by the casting method. Infrared spectroscopy and thermogravimetric analysis confirm conversion of ionic bonds to amide bonds for the modified TOCN samples after heating. As a result, improvement of TOCNs' thermal stability by up to 90 °C is successfully achieved.
