金纳米粒子的表面修饰及生物应用进展

近年来纳米材料被广泛应用于生物医学、航空航天和精细化工等领域。构成纳米材料的纳米粒子具有小尺寸效应、表面效应和宏观量子隧道效应等性质。其中金纳米粒子由于其独特的荧光特性、良好的生物相容性和表面等离子共振等性质,被广大科研人员进行深入研究。例如,在生物医学领域,科研人员构建了一系列新型的金纳米比色传感器、光学探针及各类载药体系等。然而,目前金纳米粒子仍存在水分散性差、肾清除效率低和量子发射产率低等问题,限制了其广泛应用。因此,研究人员对金纳米粒子表面进行多样化修饰,从而能有效克服上述缺点。本文就目前主流配体表面修饰金纳米粒子的研究进展进行了详细总结,着重介绍了功能化金纳米粒子在生物成像、生物检测、生物治疗三方面的应用,最后对金纳米粒子的临床治疗机制的探索以及商业化的应用进行了展望,希望能为相关领域的研究者们提供新思路。     

NaYF_4：Yb,Er上转换荧光纳米粒子的表面修饰及其在免疫分析中的应用

稀土掺杂上转换荧光纳米材料因其近红外区激发,可见光区发射的特殊发光性能,在生物标记方面具有独特优势,可大幅度降低荧光背景.β-NaYF4：Yb,Er是目前已知的发光效率最高的上转换荧光纳米材料之一,已在生命分析及生物成像分析领域展现出了广阔的应用前景.然而,由于现有β-NaYF4：Yb,Er制备工艺多是在高温条件下于高沸点有机溶剂中反应制得,所得产品在水溶液中的分散性差,限制了其在生命分析中的广泛应用.本文采用聚丙烯酸（PAA）配体交换反应,对表面包覆油酸基团的疏水β-NaYF4：Yb,Er纳米粒子进行了有效的表面修饰.表面修饰后,上转换荧光纳米粒子表面的PAA具有众多游离羧基,使其在水溶液中具有良好的分散性.同时,由于羧基的存在,使得带有氨基的生物分子能够通过化学交联反应结合到纳米粒子表面.本文以PAA表面修饰后的β-NaYF4：Yb,Er纳米粒子为荧光探针,以磁珠作为免疫反应的载体,成功构建了一种新型免疫传感器,对模型靶标分子羊抗人IgG进行了灵敏检测.磁珠表面固定兔抗羊IgG,PAA修饰的β-NaYF4：Yb,Er纳米粒子表面连接人IgG,当样品中存在羊抗人IgG时,便会在磁珠表面形成（兔抗羊IgG-羊抗人IgG-上转换荧光纳米粒子标记的人IgG）三明治式免疫复合体,通过磁分离除去未反应的组分,在980nm激光激发下测定免疫复合体的上转换荧光强度,即可实现靶标分子的高灵敏分析,可检测到低至0.1ng/mL的羊抗人IgG.同时,以磁珠为载体的免疫复合体也可通过激光扫描共聚焦荧光显微镜进行荧光成像分析,背景荧光信号低,成像质量高.实验结果表明,PAA修饰的β-NaYF4：Yb,Er上转换荧光纳米粒子是一种理想的生物标记材料,有望在生物传感及生物成像分析领域获得广泛应用.     

磁性铁氧化物纳米粒子表面功能化及其应用

表面功能化的磁性铁氧化物纳米粒子是一种新型功能材料,可应用于各种生物活性物质如蛋白质、DNA等的富集和分离,药物的磁靶向,以及疾病的诊断和治疗等许多领域.本文在总结近年来国内外有关功能化磁性铁氧化物纳米粒子研究成果的基础上,阐述了功能化磁性铁氧化物纳米粒子的结构类型、特点、目前的各种功能化制备方法以及相关应用最新研究进展,指出了当前研究中的主要发展方向和仍需要解决的问题.     

纳米金刚石的表面修饰及应用

纳米金刚石是一种新型的碳纳米粒子,具有硬度高、化学稳定、良好的生物相容性和热传导性等优点,有广阔的应用前景。对于纳米金刚石的应用,大多需要对其进行表面修饰。本文主要结合近年来国内外研究成果,阐述了氢化、羧酸化、羟基化及其他表面修饰等纳米金刚石的表面修饰方法,总结了纳米金刚石在润滑、抛光、生物医学、复合材料等领域的应用。     

优化稀土上转换纳米材料发光的方法

稀土上转换纳米材料(Upconversion Nanoparticles,UCNPs)可将近红外光转换为可见光,其发光性能优异、化学性质稳定、激发光能有效避免自荧光,因此在生物医学领域应用广泛。但UCNPs的低发光效率限制了其进一步发展。本文综述了近年来研究较多的几种优化稀土上转换纳米材料发光的方法,主要包括调整基质材料和掺杂离子、过渡金属离子与镧系离子共掺杂、引入协同敏化剂减少热效应、有机染料与UCNPs协同作用以及金属表面等离子体共振增强法等。文中分别论述了上述方法的最新研究进展,并总结了这些方法目前存在的问题,指出上转换发光领域的研发重点:一是着重分析各种优化发光方法的作用机理,提出更加完备清晰的理论体系;二是探索更容易被生物体降解的UCNPs,使其副作用降到最低。     

表面修饰的二氧化锡纳米粒子的制备及微结构表征

采用胶体化学制得表面包覆有ＤＢＳ的二氧化锡纳米粒子，并运用一系列手段对其微结构进行了表征。     

TiO_2纳米粒子的表面修饰研究

利用表面修饰法合成了油酸 (OA)修饰的TiO2 纳米粒子 ,采用红外光谱 (IR)、透射电子显微镜 (TEM)和X射线光电子能谱 (XPS)对表面修饰的TiO2 纳米粒子进行了结构表征 ,并研究了油酸浓度对TiO2 表面覆盖量及在油中分散性能的影响 .研究结果表明通过油酸表面修饰 ,成功合成了具有油分散性能的纳米TiO2 ,并且获得了油酸修饰量与TiO2 的最佳配比 .     

用硫脲分子表面修饰的CdS纳米粒子的合成和表征

报道了用硫脲分子进行表面化学修饰的CdS纳米粒子的合成方法,并引入了AOT(磺基琥珀酸双-2-乙基己基酯钠盐)作为平衡反离子,进一步对CdS表面作了修饰,增加了CdS纳米粒子在有机溶剂中的稳定性和可分散性。我们还探讨了温度、浓度、pH等因素对合成的影响,并通过TEM、XRD、FT-IR等手段对产物结构进行了表征。所得微粒粒径为5 nm左右,呈球形,硫脲分子与CdS纳米粒子富Cd²⁺表面通过形成Cd-S配位键而修饰在粒子表面。这种表面修饰的CdS纳米粒子将在非线性光学及自组装方面具有优     

胃蛋白酶对CdTe纳米粒子的表面修饰及分析应用

以巯基乙酸为稳定剂和表面修饰剂, 在有机相中合成了平均粒径为3 nm左右的CdTe纳米粒子, 用胃蛋白酶改变纳米粒子的表面修饰状态并研究其系列特性. CdTe纳米粒子在320 nm处有强的紫外吸收, 在524.8 nm处有荧光发射. 经胃蛋白酶对其表面修饰后, 紫外吸收峰位不变, 但吸光强度升高, 荧光峰位蓝移至467.2 nm, 荧光强度降低. 温度、pH值及离子强度均对表面修饰产生影响. 在最佳实验条件下, 胃蛋白酶质量浓度在4—40 mg/L范围内与荧光降低值之间呈线性关系, 检测限(3σ)为0.28 mg/L(n=10), 该方法已被用于人体胃液胃蛋白酶的测定.     

具有红光发射的稀土上转换发光纳米晶及其介孔直接功能化

红光发射稀土上转换发光纳米晶(UCNPs)在光动力治疗(PDT)等方面具有特定的优势。将油溶性的UCNPs通过表面改性转变为水溶性,对其在生物医疗、疾病诊断等方面的应用具有重要意义。利用一种简单易行的方法将具有红光发射的UCNPs进行介孔直接功能化表面修饰,制备了一种具有良好水溶性的纳米材料NaYF4:Yb/Er/Mn@mSiO2。实验结果表明该材料核-壳结构明显,形貌均一,在980 nm的激发下保持了上转换发光特性。该材料在光动力治疗等方面具有良好的潜在应用价值。     

Surface modification of MCM-41 and its application in DNA adsorption

Three types of MCM-41 absorbents, namely, Al~(3+)–MCM-41, La~(3+)–MCM-41, and Zn~(2+)–MCM-41, were prepared through amine grafting, phosphonate modification, and metal ion chelation and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and N2adsorption–desorption analysis. Results revealed that functionalized MCM-41 maintains the original structure of the molecular sieve and that the pore diameter and surface area are reduced compared with those of pure MCM-41. The adsorption behavior of DNA molecules on the surface of the modified molecular sieves was discussed according to the hard-soft acid–base(HSAB) principle. Experimental results showed that DNA purification could be effectively carried out on functionalized MCM-41 and that DNA is easily released by3–4 molL~(-1)NaCl solution. This study could be used as a general platform for future work on DNA adsorption and enrichment.     

Rational design and biomedical applications of DNA-functionalized upconversion nanoparticles

In this review, we mainly introduced recent progress of DNA-functionalized upconversion materials, providing an overview of the design and applications in biosensing, bioimaging and disease therapy. The challenges and future perspectives are also discussed, aiming to promote their applications in materials science and biomedicine.     

Surface modification of hydrophobic NaYF_4:Yb,Er upconversion nanophosphors and their applications for immunoassay

β-NaYF4:Yb,Er upconversion nanophosphor (UCNP) is known as one of the most efficient NIR-to-visible upconversion materials, which shows great potential in bioanalytical chemistry and bioimaging. However, its applications are greatly limited due to its low water dispersibility and thus poor biocompatibility. In this paper, poly(acrylic acid) (PAA)-based ligand exchange strategies are carried out to modify oleic acid-capped hydrophobic β-NaYF4:Yb,Er UCNPs into hydrophilic ones. After efficient surface modific...     

Synthesis of improved upconversion nanoparticles as ultrasensitive fluorescence probe for mycotoxins

Rare earth-doped upconversion nanoparticles (UCNPs) have promising potentials in biodetection due to their unique frequency upconverting capability and high detection sensitivity. This paper reports an improved UCNPs-based fluorescence probe for dual-sensing of Aflatoxin B1 (AFB1) and Deoxynivalenol (DON) using a magnetism-induced separation and the specific formation of antibody-targets complex. Herein, the improved UCNPs, which were namely NaYF₄:Yb/Ho/Gd and NaYF₄:Yb/Tm/Gd, were systematically studied based on the optimization of reaction time, temperature and the concentration of dopant ions with simultaneous phase and size controlled NaYF₄ nanoparticles; and the targets were detected using the pattern of competitive combination assay. Under an optimized condition, the advanced fluorescent probes revealed stronger fluorescent properties, broader biological applications and better storage stabilities compared to traditional UCNPs-based ones; and ultrasensitive determinations of AFB1 and DON were achieved under a wide sensing range of 0.001–0.1 ng ml⁻¹ with the limit of detection (LOD) of 0.001 ng ml⁻¹. Additionally, the applicability of the improved nanosensor for the detection of mycotoxins was also confirmed in adulterated oil samples.     

硅溶胶改性及其应用研究进展

二氧化硅在自然界中通常为晶态,而以溶胶-凝胶、水热、模板剂等方法人工合成的二氧化硅纳米颗粒(SiO₂ NPs)通常为无定形态。无定形SiO₂ NPs广泛应用于航空航天、催化剂载体、靶向送药等众多高端领域。生产SiO₂ NPs的方法有很多,但制备结构、形貌简单的SiO₂ NPs的主要方式为离子交换法、硅醇盐水解法、单质硅粉水解法,这些方法可制备粒径在10～800 nm的单分散SiO₂ NPs,同时可根据生产条件控制粒子的单分散性与粒径大小。寻找一种成本低廉且成品单分散性好、粒径可控的生产方法成为目前研究的热点。本文简介了SiO₂ NPs的结构形貌、基础性质、生产方法和最佳合成条件,总结了各方法的优缺点与适用领域。随后介绍了近年来SiO₂ NPs的改性研究与应用,最后在此基础上展望了合成硅溶胶存在的挑战与未来需解决的问题。     

Self-organization of dipeptide-grafted polymeric nanoparticles film: A novel method for surface modification

Novel dipeptide-grafted polymeric nanoparticles were prepared by grafting the dipeptide (Gly-Gly) to a block copolymer backbone, comprised of styrene-alt-(maleic anhydride) and styrene. In aqueous solution PSt₁₃₀-b-P(St-alt-MAn)₅₈-g-GlyGly₂₆ formed stable dispersed spherical aggregates of ca. 75 nm. The critical micelle concentration for the dipeptide-grafted block copolymer self-aggregates was 6.3 × 10⁻³ mg mL⁻¹. The zeta-potential of the aggregates was estimated experimentally. The dispersed polymer nanoparticles effectively self-organized to form stable nanoparticle thin films on hydrophobic solid surfaces, such as octadecyltrichlorosilane modified glass (OTS-G). As the ionic strength and temperature of the polymer suspension increased the surface coverage of the nanoparticle film increased and its hydrophobicity (water contact angle) decreased. Significantly less bovine serum albumin (BSA) adsorbed to nanoparticles modified surfaces with compared OTS-G surfaces. Diglycine grafted polymer nanoparticles have the potential to be used as a novel platform to study protein-protein interactions and to control fouling.     

Magnetic nanoparticles: synthesis, protection, functionalization, and application

This review focuses on the synthesis, protection, functionalization, and application of magnetic nanoparticles, as well as the magnetic properties of nanostructured systems. Substantial progress in the size and shape control of magnetic nanoparticles has been made by developing methods such as co-precipitation, thermal decomposition and/or reduction, micelle synthesis, and hydrothermal synthesis. A major challenge still is protection against corrosion, and therefore suitable protection strategies will be emphasized, for example, surfactant/polymer coating, silica coating and carbon coating of magnetic nanoparticles or embedding them in a matrix/support. Properly protected magnetic nanoparticles can be used as building blocks for the fabrication of various functional systems, and their application in catalysis and biotechnology will be briefly reviewed. Finally, some future trends and perspectives in these research areas will be outlined.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

Surface modification of polymer-based microfluidic devices

We report the chemical modification of poly(methyl methacrylate) (PMMA), and poly(carbonate) (PC) surfaces for applications in microfluidic systems. For PMMA, a reaction of the surface methyl ester groups with a monoanion of α,ω-diaminoalkanes (aminolysis reaction) to yield amine-terminated PMMA surfaces will be described. Furthermore, it was found that the amine functionalities were tethered to the PMMA backbone through an alkane bridge to amide bonds formed during the aminolysis of the surface ester functionalities. The electro-osmotic flow (EOF) in aminated-PMMA microchannels was reversed when compared to that in unmodified channels. Finally, the availability of the surface amine groups was further demonstrated by their reaction with n-octadecane-1-isocyanate to form PMMA surfaces terminated with well ordered and highly crystalline octadecane chains, appropriate for performing reverse-phase separations. Examples of reverse-phase separations of ion-paired double-stranded DNAs in electric fields (capillary electrochromatography (CEC)) will be demonstrated using a PMMA-based fluidic chip. For PC, sulfonation of the surface with SO₃ will be described; this sulfonation makes the surface very hydrophilic. EOF studies of the sulfonated-PC surfaces indicated changes in the pH-dependent profile when compared to unmodified PC.